Pretreatment of silk-dyeing industrial wastewater by UASB reactor.

The objective of this study was to investigate the performance of the upflow anaerobic sludge blanket (UASB) reactor as the pretreatment system for silk-dyeing wastewater. Two laboratory-scale UASB reactors, with working volume of 15.59 I, were used during May 1998 to June 1999. The actual wastewater was diluted to reduce ammonium ion toxicity on anaerobic bacteria. The experiments were conducted at the organic loading rates (OLRs) of 0.52, 1.01, 1.04, 1.54 and 2.56 kgCOD/(m3 x d), treating only wastewater generated from the acid-dye process of mixed-species raw silk. It took approximately 4 1/2 months to reach the steady-state conditions. It was found that the COD removal was in the ranges of 74.1-85.3%, except at OLR 2.56 kgCOD/(m3 x d) where efficiency significantly dropped to 55.2%. The apparent color removal was in the similar trend as COD. During the study periods, wastewater input had various color shades while the effluent generally looked pale yellowish. The methane generation rates ranged from 0.18-0.31 m3/kg COD removed, with methane composition 81.0-88.1% in biogas. The average granule size in the sludge bed had slowly increased to 0.73 mm in the last experiment. It can be concluded that the UASB reactor is suitable as a pretreatment system for silk-dyeing wastewater. An OLR of 1 kgCOD/(m3 x d) and an influent concentration diluted to 2,600 mgCOD/l are suggested while COD and apparent color removal efficiency of 80% and 70%, respectively, can be expected.     

Integration of sulphate reduction, autotrophic denitrification and nitrification to achieve low-cost excess sludge minimisation for Hong Kong sewage.

An integrated anaerobic-aerobic treatment system of sulphate-laden wastewater was proposed here to achieve low sludge production, low energy consumption and effective sulphide control. Before integrating the whole system, the feasibility of autotrophic denitrification utilising dissolved sulphide produced during anaerobic treatment of sulphate rich wastewater was studied here. An upflow anaerobic sludge blanket reactor was operated to treat sulphate-rich synthetic wastewater (TOC=100 mg/L and sulphate=500 mg/L) and its effluent with dissolved sulphide and external nitrate solution were fed into an anoxic biofilter. The anaerobic reactor was able to remove 77-85% of TOC at HRT of 3 h and produce 70-90 mg S/L sulphide in dissolved form for the subsequent denitrification. The performance of anoxic reactor was stable, and the anoxic reactor could remove 30 mg N/L nitrate at HRT of 2 h through autotrophic denitrification. Furthermore, sulphur balance for the anoxic filter showed that more than 90% of the removed sulphide was actually oxidised into sulphate, thereby there was no accumulation of sulphur particles in the filter bed. The net sludge productions were approximately 0.15 to 0.18 g VSS/g COD in the anaerobic reactor and 0.22 to 0.31 g VSS/g NO3- -N in the anoxic reactor. The findings in this study will be helpful in developing the integrated treatment system to achieve low-cost excess sludge minimisation.     

Simultaneous removal of ammonium-nitrogen and sulphate from wastewaters with an anaerobic attached-growth bioreactor.

Some industrial wastewaters may contain ammonium-nitrogen and/or sulphate, which need to be removed before their discharge into natural water bodies to eliminate their severe pollution. In this paper, simultaneous removal of ammonium-nitrogen and sulphate with an anaerobic attached-growth bioreactor of 3.8 L incubated with sulphate reducing bacteria (SRB) was investigated. Artificial wastewater containing sodium sulphate as electron acceptor, ammonium chlorine as electron donor and glucose as carbon source for bacteria growth was used as the feed for the bioreactor. The loading rates of ammonium-nitrogen, sulphate and COD were 2.08 gN/m3 x d, 2.38 gS/m3 x d, 104.17 gCOD/m3 x d, respectively, with a N/S ratio of 1:1.14. The results demonstrated that removal rates of ammonium-nitrogen, sulphate and COD could reach 43.35%, 58.74% and 91.34%, respectively. Meanwhile, sulphur production was observed in effluent as well as molecular nitrogen in biogas, whose amounts increased with time substantially, suggesting the occurrence of simultaneous removal of ammonium-nitrogen and sulphate. This novel reaction provided the possibility to eliminate ammonium-nitrogen and sulphate simultaneously with accomplishment of COD removal from wastewater, making wastewater treatment more economical and sustainable.     

Winery and distillery wastewater treatment by anaerobic digestion.

Anaerobic digestion is widely used for wastewater treatment, especially in the food industries. Generally after the anaerobic treatment there is an aerobic post-treatment in order to return the treated water to nature. Several technologies are applied for winery wastewater treatment. They are using free cells or flocs (anaerobic contact digesters, anaerobic sequencing batch reactors and anaerobic lagoons), anaerobic granules (Upflow Anaerobic Sludge Blanket--UASB), or biofilms on fixed support (anaerobic filter) or on mobile support as with the fluidised bed. Some technologies include two strategies, e.g. a sludge bed with anaerobic filter as in the hybrid digester. With winery wastewaters (as for vinasses from distilleries) the removal yield for anaerobic digestion is very high, up to 90-95% COD removal. The organic loads are between 5 and 15 kgCOD/m3 of digester/day. The biogas production is between 400 and 600 L per kg COD removed with 60 to 70% methane content. For anaerobic and aerobic post-treatment of vinasses in the Cognac region, REVICO company has 99.7% COD removal and the cost is 0.52 Euro/m3 of vinasses.     

Treatment of winery wastewater in a conventional municipal activated sludge process: five years of experience.

A full-scale wastewater treatment plant where municipal and winery wastewaters were co-treated was studied for five years. The experimental results showed that suspended solids, COD, nitrogen and phosphorous were effectively removed both during the treatment of municipal wastewater and the cotreatment of municipal and winery wastewater. The sludge production increase from 4 tons to 5.5 tons per day during the harvesting and wine making period. In any case the specific sludge production was 0.2 kgMLVSS per kgCOD(removed) despite the organic loading increasing. About 70% of the COD was removed through respiration. Also the energy demand increased from 6,000 to 7,000 kWh per day. The estimated costs for the treatment of the winery wastewater was 0.2-0.3 Euros per m3 of treated wastewater. With reference to the process efficiency, the nitrogen removal was just 20%. The co-treatment of municipal and winery wastewater in conventional activated sludge processes can be a feasible solution for the treatment of these streams at relatively low costs.     

Development of an ecologically sustainable wastewater treatment system

The present study aimed mainly for the development of a wastewater treatment system incorporating enhanced primary treatment, anaerobic digestion of coagulated organics, biofilm aerobic process for the removal of soluble organics and disinfection of treated water. An attempt was also made to study the reuse potential of treated water for irrigation and use of digested sludge as soil conditioner by growing marigold plants. Ferric chloride dose of 30 mg/l was found to be the optimum dose for enhanced primary treatment with removals of COD and BOD to the extent of 60% and 77%, respectively. Efficient anaerobic digestion of ferric coagulated sludge was performed at 7 days hydraulic retention time (HRT). Upflow aerobic fixed film reactor (UAFFR) was very efficient in removals of COD/BOD in the organic loading rate (OLR) range of 0.25 to 3 kg COD/m(3)/day with COD and BOD removals in the range 65-90 and 82-96, respectively. Photo-oxidation followed by disinfection saved 50% of chlorine dose required for disinfection of treated effluent and treated water was found to be suitable for irrigation. The result also indicated that anaerobically digested sludge may be an excellent soil conditioner. From the results of this study, it is possible to conclude that the developed wastewater treatment system is an attractive ecologically sustainable alternative for sewage treatment from institutional/industrial/residential campuses.     

Low temperature anaerobic biotreatment of priority pollutants.

The effect of low operating temperature and pollutant concentration on the performance of five anaerobic hybrid reactors was investigated. Stable and efficient long-term (>400 days) treatment of a cold (6-13 degrees C), volatile fatty acid (VFA)-based, wastewater was achieved at applied organic loading rates (OLRs) of 5 kg chemical oxygen demand (COD) m(-3) d(-1) with COD removal efficiencies c. 84% at 6 degrees C (sludge loading rate (SLR) 1.04-1.46 kg COD kg [VSS](-1) d(-1)). VFA-based wastewaters, containing up to 14 g pentachlorophenol (PCP) m(-3) d(-1) or 155 g toluene m(-3) d(-1) were successfully treated at applied OLRs of 5-7 kg COD m(-3) d(-1). Despite transient declines in reactor performance in response to increasing toxicant loading rates, stable operation (COD removal efficiencies > 90%) and satisfactory toxicant removal efficiencies (>88%) were demonstrated by the systems.     

Microbial sulphate reduction during anaerobic digestion: EGSB process performance and potential for nitrite suppression of SRB activity.

The present study investigated mesophilic anaerobic treatment of sulphate-containing wastewater in EGSB reactors and assessed the inclusion of nitrite in the reactor influent as a method for control of biological sulphate reduction. Two EGSB reactors, R1 and R2, were operated for a period of 581 days at varying volumetric loading rates, COD/SO4(2-) ratios and influent nitrite concentrations (R2 only). COD removal efficiencies of > 93% were achieved in both reactors at influent sulphate concentrations of up to 3,000 mg l(-1). A two-fold increase in the influent sulphate concentration, giving an influent COD/SO4(2-) ratio of 2, resulted in a reduction in reactor COD removal efficiency to 84% and 89%, in R1 and R2, respectively. Despite inclusion of nitrite in the R2 influent at concentrations up to 500 mg NO2-N l(-1), sulphate reduction proceeded similarly in R2 and R1, suggesting the ineffectiveness of nitrite as a potential inhibitor of SRB     

Development and optimisation of VFA driven DEAMOX process for treatment of strong nitrogenous anaerobic effluents.

The recently proposed DEAMOX (DEnitrifying AMmonium OXidation) process combines the anammox reaction with autotrophic denitrifying conditions using sulphide as an electron donor for the production of nitrite from nitrate within an anaerobic biofilm. This paper firstly presents a feasibility study of the DEAMOX process using synthetic (ammonia + nitrate) wastewater where sulphide is replaced by volatile fatty acids (VFA) as a more widespread electron donor for partial denitrification. Under the influent N-NH+4/N-NO3(-) and COD/N-NO3(-) ratios of 1 and 2.3, respectively, the typical efficiencies of ammonia removal were around 40% (no matter whether a VFA mixture or only acetate were used) for nitrogen loading rates (NLR) up to 1236 mg N/l/d. This parameter increased to 80% by increasing the influent COD/N-NO3(-) ratio to 3.48 and decreasing the influent N-NH4 +/N-NO3(-) ratio to 0.29. As a result, the total nitrogen removal increased to 95%. The proposed process was further tested with typical strong nitrogenous effluent such as reject water (total N, 530-566 mg N/l; total COD, 1530-1780 mg/l) after thermophilic sludge anaerobic digestion. For this, the raw wastewater was split and partially ( approximately 50%) fed to a nitrifying reactor (to generate nitrate) and the remaining part ( approximately 50%) was directed to the DEAMOX reactor where this stream was mixed with the nitrified effluent. Stable process performance up to NLR of 1,243 mg N/l/d in the DEAMOX reactor was achieved resulting in 40, 100, and 66% removal of ammonia, NOx(-), and total nitrogen, respectively.     

Biomass adaptation to complex substrate degradation in membrane bioreactors: appropriated operating conditions.

The aim of this work is to analyse the biological performances of two immersed membranes bioreactors focusing on the biomass adaptation to complex substrate degradation and the performance in term of permeate quality. Two influents were selected: a synthetic complex influent (acetate/Viandox, MBR1) and a real seafood processing wastewater (surimi product, MBR2). The MBR systems were operated for long periods without any sludge extraction except for sampling. Organic matter removal, sludge production and quality of the treated wastewater were analysed and studied. COD removal efficiencies after a period of biomass adaptation were higher than 97% and 95% for the synthetic and real wastewater respectively. In both cases, the COD of the treated wastewater was lower than 50 mg.L(-1). In spite of salt concentration in the real wastewater a biomass adaptation process occurs. In the overall operational period, a 0.058 gCOD P.gCOD T(-1) and a 0.12 gCOD P.gCOD T(-1) observed sludge yields were obtained for the MBR1 and MBR2 respectively. These values are approximately 5 to 10 times lower than those measured in conventional activated sludge process. These results showed that the presence of particular and some of non-easily degradable compounds in the influent of MBR2 didn't limit the performance of MBR in term of COD removal achieved. The results have also confirmed the excellent permeate quality for water reuse from MBRs systems.     

Treatment of winery wastewaters in a membrane submerged bioreactor.

Wine production is seasonal, and thus the wastewater flow and its chemical oxygen demand (COD) concentrations greatly vary during the vintage and non-vintage periods, as well as being dependant on the winemaking technologies used, e.g. red, white or special wines production. Due to this seasonal high variability in terms of organic matter load, the use of membrane biological reactors (MBR) could be suitable for the treatment of such wastewaters. MBR offers several benefits, such as rapid start up, good effluent quality, low footprint area, absence of voluminous secondary settler and its operation is not affected by the settling properties of the sludge. A pilot scale hollow fibre MBR system of 220 L was fed by adequately diluting white wine with tap water, simulating wastewaters generated in wineries. The COD in the influent ranged between 1,000 and 4,000 mg/L. In less than 10 days after the start up, the system showed a good COD removal efficiency. The COD elimination percentage was always higher than 97% regardless of the organic loading rate (OLR) applied (0.5-2.2 kg COD/m3 d), with COD concentrations in the effluent ranging between 20 and 100 mg/L. Although the biomass concentration in the reactor increased from 0.5 to 8.6 g VSS/L, the suspended solids concentration in the effluent was negligible. Apparent biomass yield was estimated in 0.14 g VSS/g COD.     

Reliable method for assessing the COD mass balance of a submerged anaerobic membrane bioreactor (SAMBR) treating sulphate-rich municipal wastewater

The anaerobic treatment of sulphate-rich wastewater causes sulphate reducing bacteria (SRB) and methanogenic archaea (MA) to compete for the available substrate. The outcome is lower methane yield coefficient and, therefore, a reduction in the energy recovery potential of the anaerobic treatment. Moreover, in order to assess the overall chemical oxygen demand (COD) balance, it is necessary to determine how much dissolved CH(4) is lost in the effluent. The aim of this study is to develop a detailed and reliable method for assessing the COD mass balance and, thereby, to establish a more precise methane yield coefficient for anaerobic systems treating sulphate-rich wastewaters. A submerged anaerobic membrane bioreactor (SAMBR) treating sulphate-rich municipal wastewater was operated at 33 °C for an experimental period of 90 d, resulting in a high COD removal (approximately 84%) with a methane-enriched biogas of 54 ± 15% v/v. The novelty of the proposed methodology is to take into account the sulphide oxidation during COD determination, the COD removed only by MA and the dissolved CH(4) lost with the effluent. The obtained biomethanation yield (333 L CH(4) kg(-1) COD(REM MA)) is close to the theoretical value, which confirms the reliability of the proposed method.     

Fenton试剂处理港口化学品洗舱废水

根据珠海某港口化学品洗舱废水的组成,配置甲醛、甲苯、苯酚的单独污染物模拟废水,采用Fenton试剂对港口废水和模拟废水进行氧化处理。通过实验探讨了不同的H2O2和Fe2+浓度、pH值、反应时间下各种废水COD的去除情况,确定了各种废水最佳的操作条件。港口废水在最佳的操作条件下COD去除率约为88%,废水的COD质量浓度从2 000~2 200 mg/L降到低于280 mg/L,废水由原来的无法生化变为易生物降解。苯酚、甲醛、甲苯模拟废水在各自最佳的操作条件下,COD去除率也都达到85%以上。     

Technological transfer to demonstrative scale of sequencing batch biofilter granular reactor (SBBGR) technology for municipal and industrial wastewater treatment

The paper reports the results of an experimental investigation aimed at transferring to demonstrative scale an innovative technology (SBBGR-Sequencing Batch Biofilter Granular Reactor) for the treatment of municipal and industrial wastewater by financial support of the EU Life programme. When this technology was applied for treating municipal wastewater, the results showed that the system was able to remove 80-90% of COD, total suspended solids and ammonia independently of the hydraulic residence time investigated (i.e., from 12 to 4 h). In the case of tannery wastewater, chosen as representative of concentrated industrial wastewater, SBBGR technology was suitable for removing 80-90% of the COD, suspended solids and ammonia content up to organic loading values of 3.5 kg COD/m3.d. During both periods, the process was characterised by a very high sludge age value (theta(c) approximately 150 d) that led to a biomass concentration as high as 35 gTSS/L(bed) and a sludge production much lower (5-6 times lower) that than commonly reported for conventional treatment plants.     

Use of agro-food wastewaters for the optimisation of the denitrification process.

The aim of this work was to study the feasibility of the denitrification process enhancement, in the Ciudad Real (Spain) WWTP, by dosing agro-food wastewaters generated nearby the city. The studied agro-food wastewaters were characterised by a high COD and low nutrients concentration. The denitrification rates with these wastewaters were lower than those obtained either with acetate or urban sewage, however the dose of agro-food wastewaters raised significantly the denitrification capacity in the WWTP because of the significant increase of easily biodegradable substrates in the wastewater. From the laboratory NUR batch test it was observed that the best agro-food wastewater to enhance the denitrification process was that coming from tomato processing, which presented an average denitrification rate of 1.9 mg NOx-N/(g VSS.h) and an average denitrification yield of 0.2 mg NOx-N/mg COD. The viability of the use of tomato processing wastewater was checked in a pilot plant optimised for urban sewage treatment with biological nutrient removal. The optimum dose, 5.9 mg COD/mg NOx-N, was applied and 99% of the nitrate was removed from the wastewater without influencing negatively either the COD or P effluent concentrations.     

Sequenced anaerobic-aerobic treatment of high strength, strong nitrogenous landfill leachates.

As a first step in treatment of high strength, strong nitrogenous landfill leachates (total COD--9.66-20.56 g/l, total nitrogen 780-1,080 mg/l), the performance of laboratory UASB reactors has been investigated under sub-mesophilic (19+/-3 degrees C) and psychrophilic (10+/-2 degrees C) conditions. Under hydraulic retention time (HRT) of around 1.2 days, when the average organic loading rate (OLR) was around 8.5 g COD/l/day, the total COD removal accounted for 71% (on average) for sub-mesophilic regime. The psychrophilic treatment conducted under the average HRT of 2.44 days and the average OLR of 4.2 g COD/l/day showed an average total COD removal of 58% giving effluents more suitable for subsequent biological nitrogen removal. Both anaerobic regimes were quite efficient for elimination of heavy metals by concomitant precipitation in the form of insoluble sulphides inside the sludge. The subsequent submesophilic aerobic-anoxic treatment of submesophilic anaerobic effluents led to only 75% of total inorganic N removal due to COD deficiency for denitrification created by too efficient anaerobic step. On the contrary, psychrophilic anaerobic effluents (richer in COD compared to the submesophilic ones) were more suitable for subsequent aerobic-anoxic treatment giving the total N removal of 95 and 92% at 19 and 10 degrees C, respectively.     

Combined biological and physico-chemical treatment of baker's yeast wastewater including removal of coloured and recalcitrant to biodegradation pollutants.

The UASB reactor (35 degrees C) was quite efficient for removal of bulk COD (62-67%) even for such high strength and recalcitrant wastewater as the cultivation medium from the first separation process of baker'syeasts (the average organic loading rates varied from 3.7 to 10.3 g COD/l/d). The aerobic-anoxic biofilter (20 degrees C) can be used for removal of remaining BOD and ammonia from strong nitrogenous anaerobic effluents; however, it suffered from COD-deficiency to fulfil denitrification requirements. To balance the COD/N ratio, some bypass of raw wastewater should be added to the biofilter feed. The application of iron chloride coagulation for post-treatment of aerobic effluents may fulfil the discharge limits (even for colour mainly exerted by hardly biodegradable melanoidins) under iron concentrations around 200 mg/l.     

Treatment of slaughterhouse plant wastewater by using a membrane bioreactor

The use of a membrane bioreactor (MBR) for removal of organic substances and nutrients from slaughterhouse plant wastewater was investigated. The chemical oxygen demand (COD), total nitrogen (TN), and total phosphorus (TP) concentrations of slaughterhouse wastewater were found to be approximately 571 mg O2/L, 102.5 mg/L, and 16.25 mg PO4-P/L, respectively. A submerged type membrane was used in the bioreactor. The removal efficiencies for COD, total organic carbon (TOC), TP and TN were found to be 97, 96, 65, 44% respectively. The COD value of wastewater was decreased to 16 mg/L (COD discharge standard for slaughterhouse plant wastewaters is 160 mg/L). TOC was decreased to 9 mg/L (TOC discharge standard for slaughterhouse plant wastewaters is 20 mg/L). Ammonium, and nitrate nitrogen concentrations of treated effluent were 0.100 mg NH4-N/L, and 80.521 mg NO3-N/L, respectively. Slaughterhouse wastewater was successfully treated with the MBR process.     

Combined biological and physico-chemical treatment of baker's yeast wastewater.

The UASB reactor (35 degrees C) was quite efficient for removal of bulk COD (52-74%) from the raw and diluted cultivation medium from the first separation process of baker's yeasts (the average organic loading rates varied in the range 3.7-16 g COD/I/d). The aerobic-anoxic biofilter (19-23 degrees C) can be used for removal of remaining BOD and ammonia from anaerobic effluents; however, it had insufficient COD to fulfil the denitrification requirements. To balance COD/N ratio, some bypass of raw wastewater (approximately 10%) should be added to the biofilter feed. The application of iron (III)-, aluminium- or calcium-induced coagulation for post-treatment of aerobic effluents can fulfil the limits for discharge to sewerage (even for colour mainly exerted by hardly biodegradable melanoidins), however, the required amounts of coagulants were relatively high.     

Activity of sulphate reducing bacteria according to COD/SO4(2-) ratio of acrylonitrile wastewater containing high sulphate.

This study was performed to evaluate the biodegradability of acrylonitrile wastewater, microbial inhibition effect of acrylonitrile wastewater on removal efficiency and the activity of sulphate reducing bacteria (SRB) according to COD/sulphate ratio. Acrylonitrile wastewater was hardly biodegradable in a biodegradability test, however, SRB activity was 57% for overall consumption of electron donor and it was relatively high value compared to 17% of reference test with glucose. COD removal of acrylonitrile wastewater was improved to 57% and 61% from 20% as the COD/sulphate ratio were 0.5 and 0.3 by sulphate addition to acrylonitrile wastewater. First order reaction rate constants k on organic removal of acrylonitrile wastewater were 0.001, 0.004 and 0.004 at each COD/sulphate ratio of 0.9, 0.5 and 0.3. Thus it was suggested that the activity of SRB was a significant factor for removing organics and sulphate simultaneously in acrylonitrile wastewater.