首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 140 毫秒
1.
利用水平井开发低渗透气藏过程中,产水使得水平井筒压降规律异于井筒单相压降,因此分析产水水平井井筒压降规律至关重要。该文基于气水两相渗流原理以及水平井周围椭圆形渗流场,考虑启动压力梯度、应力敏感性、滑脱效应以及高速非达西流动等因素的影响,定义气水两相广义拟压力,得到了低渗气藏中气水同产水平井地层渗流模型,并考虑水平井筒变质量流动,建立了地层两相渗流与井筒两相管流的耦合模型。实例分析发现:低渗气藏水平井井筒压降约为0.01 MPa,远远大于气藏单相井筒压降。由敏感性分析可知,随着水气体积比和滑脱因子的逐渐增大,井筒压降不断增大,而随着启动压力梯度和应力敏感指数的增大,井筒压降则不断减小。该文为低渗气藏气水同产水平井井筒压降规律的研究提供了新的思路。  相似文献   

2.
低渗透稠油储层具有明显的启动压力梯度,该文首先基于分析低渗透油藏弹性能量开发中的不稳定渗流过程,得到拟稳态条件下直井开发渗流方程的基本解;再利用保角变换方法,建立考虑启动压力梯度影响下,水平井在三维空间上压力分布的计算模型。考虑技术和经济因素,提出了低渗透稠油油藏衰竭开发下水平井储量有效动用界限,包括满足渗流速度要求的最大动用范围以及满足经济极限累计产油量要求的最小动用范围,并建立了相应的计算方法。研究结果表明,对于低渗透稠油油藏,要综合考虑技术和经济条件的要求,在满足水平井储量有效动用界限的基础上确定开发井距,才能对此类油藏进行有效开发。通过X-DEH油田开发实例,研究了不同储层物性和开发条件下,水平井在水平平面动用半径和垂直平面动用厚度的变化规律,结果表明该方法具有很好的可操作性。  相似文献   

3.
为了认识低渗透油藏的水驱动态规律,完善低速非达西渗流的水驱动态理论,该文基于流管法的基本原理,给出了五点法井网的三角流管模型,引入启动压力梯度,建立了低渗透油藏水驱动态开发指标的油藏工程计算方法。经对比验证,利用该方法计算的产油量与实际产量一致,若不考虑启动压力梯度会导致产油量偏高,存在较大误差。绘制并分析了渗流阻力、含水饱和度、产油量、产水量、采出程度以及波及系数等动态指标的变化曲线。结果表明,随着注入水从主流管向外的扩展,水驱前缘推进变慢,渗流阻力也随之变大,流管中注入水突破变慢。主流管突破后产油量迅速下降,开始迅速产水,采出程度和波及系数增幅变缓。所有流管都突破后产量和采出程度趋于平缓,注入水完全波及。同一时刻水驱前缘后从注入井端到采油井端的含水饱和度不断减小。研究结果可为低渗透油田水驱开发及动态分析提供指导。  相似文献   

4.
在体积压裂模式下,致密油储层发育多尺度的不同介质,导致其渗流机理复杂,产量预测难度大。该文针对致密油独特的储层特征,结合实际生产动态特征,分为多生产阶段、多渗流区域,考虑启动压力梯度、压敏效应等非达西因子的影响,遵循质量守恒与势能守恒原理,建立了致密油储层压裂水平井产能预测模型。根据实际生产数据,通过产能模型,可以进行历史拟合,并反演得到相关参数,最终实现单井产能预测。同时,以产能模型为技术手段,分析了压裂水平井在致密油储层中的开发动态,考虑的产能敏感性因素主要包括非达西因子、水平段长度、裂缝条数、裂缝半长、裂缝导流能力等。实例计算表明,启动压力梯度和压敏效应对产能的影响较大,且压裂水平井产量并不是随着各影响因素值的增加而线性增大,考虑投入产出比,均应该存在一个相对最佳值或者最佳值范围。  相似文献   

5.
低渗透油藏非线性渗流理论及数值模拟方法   总被引:3,自引:0,他引:3  
针对低渗透油藏非线性渗流理论与数值模拟方法方面存在的大量问题,从毛细管模型出发,推导了低渗透油藏非线性渗流新模型,详细解释了新模型中特有的物理参数内涵;并由此建立了低渗透油藏非线性单相渗流理论,与相对渗透率引入渠道流假设一致,将单相非线性新模型推广到两相渗流中,建立了能够同时考虑启动压力梯度、非线性渗流弯曲段连续变化的数值模拟方法。根据所建立的低渗透油藏单相稳态和非稳态渗流理论以及数值模拟方法,开展了达西、拟启动压力梯度和非线性模型的油藏动态对比计算。结果表明:低渗透油藏主要受非线性渗流控制,仅井点的少数网格存在拟线性流动,非线性模型计算的结果介于达西和拟启动线性模型之间。  相似文献   

6.
本文研究了双重孔隙介质中水平井两相渗流问题,在流线不变的假定下,给出了水驱油二维渗流含水饱和度分布和见水时间公式。由于亲水岩块的吸渗作用,裂缝系统中含水饱和度沿特征线按指数规律下降,从而双重孔隙介质的见水时间较均质介质的较晚,采油量较多。  相似文献   

7.
蒸汽辅助重力泄油(SAGD)是开采特超稠油油藏的一项前沿技术,经典的SAGD Butler产能模型假设油藏各向同性,导致产能计算结果较实际值偏高,无法应用于各向异性稠油油藏。该文通过分析各向异性油藏渗透率的方向性,得出了压力梯度和渗流速度2个方向的渗透率,将2个方向渗透率模型分别代入Butler产能公式,得出了2种适用于各向异性稠油油藏的SAGD产能半解析公式,并通过数值方法进行了求解。结果表明:方向渗透率的压力梯度和渗流速度模型能够方便地应用于各向异性油藏产能公式;油藏各向异性会降低SAGD水平扩展阶段产能,并且该阶段产能随着蒸汽腔向泄油边界的扩展逐渐增大,随着生产时间的推移逐渐接近各向同性情形。  相似文献   

8.
阶梯水平井生产段油藏渗流与井筒变质量管流的耦合模型   总被引:10,自引:3,他引:7  
随着油气勘探和开发技术的迅猛发展,阶梯水平井作为水平井的一种特殊井型,日益在国内外油田得到广泛应用。基于势叠加原理和镜像反映原理,推导出了薄互层油藏中阶梯式水平井生产段的空间势分布;采用微元线汇理论和动量守恒定律建立了薄互层油藏阶梯水平井生产段沿程压降计算模型。推导出了裸眼完井方式下阶梯水平井生产段油藏渗流与井简变质量管流耦合的数学流动模型,并提出了相应的数学解法。  相似文献   

9.
为研究压气储能(CAES)储气库衬砌密封层开裂对裂隙围岩的两相渗流和传热特性的影响,基于COMSOL平台,利用弱形式PDE二次开发了双重介质两相渗流计算程序,并进行了验证。以某CAES储气库为背景,建立了储气库裂隙岩体两相渗流传热数值模型,研究了充放气过程中衬砌开裂对裂隙围岩的两相渗流和传热特性的影响。结果表明:(1)衬砌开裂会使围岩裂隙和孔隙内渗流压力升高,同时导致裂隙和孔隙之间的渗流压力差增大,最大压差增大1.5 MPa。(2)运行210 d后,衬砌开裂将导致渗漏的气体水平扩散范围由无开裂的54 m扩大至66.7 m。(3)初次充放气条件下,衬砌内外侧温差大,有可能超过100 K;衬砌开裂和围岩裂隙对衬砌和围岩温度分布影响微弱。因此衬砌开裂会造成渗流压力扩散,但对温度分布影响微弱。  相似文献   

10.
低渗透油藏非线性渗流产能计算模型及参数敏感性分析   总被引:1,自引:0,他引:1  
应用常规的油藏工程方法,进行低渗透油藏动态预测普遍存在较大的误差.对此,在考虑启动压力梯度、应力敏感性、牛顿流体微压缩性以及流体粘度可变性的基础上,运用渗流理论,建立了低渗透油藏非线性平面径向稳定渗流模型,应用解析方法对模型进行求解.结合华庆油田白155井区超低渗透油藏的开发实例,对影响油井的产能因素进行参数敏感性分析,绘制了不同参数下油井的产能曲线.与达西线性渗流对比,提出该模型可用来评价油井产能以及进行产能预测.  相似文献   

11.
The mechanism of the fluid flow in low permeability reservoirs is different from that in middle-high permeability rese-rvoirs because of the existence of the Threshold Pressure Gradient (TPG). When the...  相似文献   

12.
本文建立了一个由高渗透油层、具有一定垂向渗透能力的夹层和低渗透油层组成的三层地质模型。计算并分析了在不同开采方式下夹层垂向渗透率、井距、低渗层厚度对低渗层开发效果的影响。计算结果表明:存在某一个夹层垂向渗透率的界限值,对通过夹层的流体窜流量影响明显;在大于此值后,窜流量占低渗层储量、生产井产量及低渗层产量的比例不可忽视。在注采比较大时,窜流方向因开采方式的不同而异。在采取同样的注采方式下,一般低渗透层厚度越小,窜流量对低渗层的影响越大。低渗层含油饱和度随井距变化的改变量相对较大,存在一个经济的注采井距。  相似文献   

13.
By defining new dimensionless variables, nonlinear mathematical models for one-dimensional flow with unknown moving boundaries in semi-infinite porous media are modified to be solved analytically. The exact analytical solutions for both constant-rate and constant-pressure inner boundary constraint problems are obtained by applying the Green's function. Two transcendental equations for moving boundary problems are obtained and solved using the Newton-Raphson iteration. The exact analytical solutions are then compared with the approximate solutions. The Pascal's approximate formula in reference is fairly accurate for the moving boundary development under the constant-rate condition. But another Pascal's approximate formula given in reference is not very robust for constant-pressure condition problems during the early production period, and could lead to false results at the maximum moving boundary distance. Our results also show that, in presence of larger TPG, more pressure drop is required to maintain a constant-rate production. Under the constant-pressure producing condition, the flow rate may decline dramatically due to a large TPG. What's more, there exists a maximum distance for a given TPG, beyond which the porous media is not disturbed.  相似文献   

14.
In a low permeability reservoir, the existence of a moving boundary is considered in the study of the transient porous flow with threshold pressure gradient. The transmission of the moving boundary directly indicates the size of the drainage area as well as the apparent influences on the pressure behavior. The nonlinear transient flow mathematical model in which the threshold pressure gradient and the moving boundary are incorporated is solved by advanced mathematical methods. This paper presents some new analytical solutions describing the pressure distribution at a constant rate and the production decline in a constant pressure production with the boundary propagation. It is shown that the greater the threshold pressure gradient, the slower the transmission of the moving boundary, the larger the pressure loss will be, and there is no radial flow in the middle and later phases of the wellface pressure for a well at a constant rate. We have the the maximum moving boundary at a specific drawdown pressure for a low permeability reservoir. The greater the threshold pressure gradient, the smaller the maximum moving boundary distance, the quicker the production decline for a well in a constant pressure production will be. The type curve charts for the modern well test analysis and the rate transient analysis with a moving boundary are obtained and the field test and the production data are interpreted as examples to illustrate how to use our new results.  相似文献   

15.
To select a proper displacement medium with the purpose of developing ultra-low permeability reservoirs both effectively and economically, three kinds of gases, including CO2, NG and N2, are studied through physical modeling and numerical simulation under the specified reservoir conditions. The results indicate that the oil recovery through water injection is relatively low in ultra-low permeability reservoirs, where the water breaks through early and the water cut rises rapidly. Gas injection can enhance the production, of which the gas-drive efficiency depends on the injection pressure and the gas itself. CO2 is proved to be the best one after comprehensive consideration of the recovery speed, the overall recovery efficiency and the time needed for gas to break through. The pressure of CO2 injection in the field experiments is lower, compared with that of water-drive. The injectivity index of CO2 is 7.2 times as high as that of water, and the oil production of the test well group increases by about 4 t/d.  相似文献   

16.
悬浮液调剖剂在油层中渗滤特征研究   总被引:1,自引:0,他引:1  
论文根据质量守恒建立了固相颗粒运移和沉淀动态方程,通过求解得到悬浮液浓度分布和颗粒滞留量分布关系,研究结果表明,颗粒型调剖剂的沿程浓度逐渐降低,随注入时间增加,同一位置上的调剖剂浓度逐渐升高,多孔介质对固相颗粒的渗滤作用,颗粒滞留主要集中在近井周围。岩石渗透率时变动态模型表明,岩石渗透率比其孔隙度的变化幅度大得多,颗粒型堵剂其少量的滞留即可改变岩石渗透率。相同注入量条件下,随注入速度增加悬浮液浓度增加,同时渗透率降低程度增加,提高注入速度有利于将颗粒挤入到多孔介质较深部位。调剖过程中的注入压力动态主要取决调剖地层系数,随注入速度增加,注入压力逐渐回升,但不同注入速度下注入压力的回升速度不同,对于较高的注入压力,调剖剂很容易提前启动中低渗透层,因此注入速度的选择应在注入设备工作条件下,以油层破裂压力为限制,保证注入压力缓速回升。  相似文献   

17.
超声波对多孔介质中液体流动的影响   总被引:2,自引:1,他引:1  
近年来,超声波技术已被应用于采油工程中,形成了一门新的学科-采油声学。本文主要研究了超声波对多孔介质中液体流动的影响,尤其是两相流动的影响。实验采用的多孔介质为人造石英砂岩,渗流液体为油和水。实验结果表明:超声波作用能够提高油的渗流速度,提高原油采收率,并降低采出液的含水率。  相似文献   

18.
氮气泡沫热力驱数值模拟研究   总被引:3,自引:1,他引:2  
建立了三维、三相、多组分数学模型,模型考虑了相平衡以及温度、界面张力对油、气、水三相渗流的影响以及起泡剂损失的各种机理,较全面地反映了氮气泡沫热力驱的作用机理。采用模块化的程序设计方法,编制了三维、三相、多组分氮气泡沫热力驱油藏数值模拟软件。利用该数值模拟软件对氮气泡沫热力驱进行了数值模拟,讨论了注采参数及起泡剂性质参数对采油效果的影响。  相似文献   

19.
Most researches of the threshold pressure gradient in tight gas reservoirs are experimental and mainly focus on the transient pressure response, without paying much attention to the transient rate decline. This paper establishes a dual-porosity rate transient decline model for the horizontal well with consideration of the threshold pressure gradient, which represents the non-Darcy flow in a fracture system. The solution is obtained by employing the Laplace transform and the orthogonal transform. The bi-logarithmic type curves of the dimensionless production rate and derivative are plotted by the Stehfest numerical inversion method. Seven different flow regimes are identified and the effects of the influence factors such as the threshold pressure gradient, the elastic storativity ratio, and the cross flow coefficient are discussed. The presented research could interpret the production behavior more accurately and effectively for tight gas reservoirs.  相似文献   

20.
考虑纳米颗粒吸附边界层对管径大小的影响和不同流态时的岩心渗透率的差异,建立了基于纳米颗粒吸附的均质多孔介质水流滑移数学模型(K-L MⅡ)。测试了油基和水基两种纳米流体的减阻效果,两组岩心水相渗透率的增幅平均分别为46.5%和76%。利用K-L MⅡ和K-L MⅠ计算了两组岩心中的水流滑移长度,大约在20–80 nm左右。结果显示,两者的差异较大,最大相差100%,表明不宜用K-L MⅠ计算具有吸附层厚度影响的滑移长度。利用K-L MⅡ解释了纳米颗粒吸附造成孔道减小而注水量增加的矛盾,为阐述纳米减阻机理提供了理论依据。K-L MⅡ也适用于吸附层厚度为0的水流滑移效应,具有普适性。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号