Adsorption and antibacterial activity of silver‐dispersed carbon aerogels

Silver‐dispersed carbon aerogels (Ag/CAs) were obtained by the direct immersion of organic aerogels in aqueous AgNO₃ solutions and then carbonization of the resulting material under a nitrogen atmosphere. The adsorption and antibacterial activity of Escherichia coli and Staphylococcus aureus on Ag/CAs were studied by the measurement of the amount of viable bacteria in suspensions and scanning electron microscopy (SEM) observations. The adsorbed amount of bacteria on samples without silver increased with an increase in the carbonization temperature and contact time. SEM studies showed that the adsorption capacity of Ag/CAs decreased with an increase in the silver content; this was considered to be mainly due to the dissolution behavior of bacteria by silver ions. The antibacterial test showed that 2.5 mg of Ag/CAs with more than 3.6% Ag could inhibit the growth of 10⁵ cfu/mL E. coli in 10 mL of a Mueller–Hinton broth culture, but in the case of S. aureus, 10‐mg samples just got the same antibacterial effect. An antibacterial persistency test showed that 25 mg of Ag/CAs with 6.5% Ag could kill 50 mL of 10⁵ cfu/mL E. coli eight times. These results indicate that Ag/CAs possess strong and long‐term antibacterial activity. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1030–1037, 2006     

Studies on the synthesis of electrospun PAN‐Ag composite nanofibers for antibacterial application

We have successfully synthesized polyacrylonitrile (PAN) nanofibers impregnated with Ag nanoparticles by electrospinning method at room temperature. Briefly, the PAN‐Ag composite nanofibers were prepared by electrospinning PAN (10% w/v) in dimethyl formamide (DMF) solvent containing silver nitrate (AgNO₃) in the amounts of 8% by weight of PAN. The silver ions were reduced into silver particles in three different methods i.e., by refluxing the solution before electrospinning, treating with sodium borohydride (NaBH₄), as reducing agent, and heating the prepared composite nanofibers at 160°C. The prepared PAN nanofibers functionalized with Ag nanoparticles were characterized by field emission scanning electron microscopy (FESEM), SEM elemental detection X‐ray analysis (SEM‐EDAX), transmission electron microscopy (TEM), and ultraviolet‐visible spectroscopy (UV‐VIS) analytical techniques. UV‐VIS spectra analysis showed distinct absorption band at 410 nm, suggesting the formation of Ag nanoparticles. TEM micrographs confirmed homogeneous dispersion of Ag nanoparticles on the surface of PAN nanofibers, and particle diameter was found to be 5–15 nm. It was found that all the three electrospun PAN‐Ag composite nanofibers showed strong antibacterial activity toward both gram positive and gram negative bacteria. However, the antibacterial activity of PAN‐Ag composite nanofibers membrane prepared by refluxed method was most prominent against S. aureus bacteria. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

A Novel Approach to Prepare Poly(Vinyl Acetate)/Ag Nanocomposite for Effective Antimicrobial Coating Applications

Polyvinyl acetate nanocomposites were successfully prepared based on silver nanoparticles. First, silver nanoparticles were directly prepared during the in situ emulsion polymerization of vinyl acetate monomer using AgNO₃ as a source of Ag⁺ ions and poly(vinyl alcohol) was used for dual functions as emulsifier for emulsion polymerization and as a stabilizing agent, trisodium citrate (C₆H₅O₇Na₃) was used as reducing agent for Ag⁺ ions during the polymerization process. The prepared polyvinyl acetate/Ag nanocomposites were assessed using X-ray diffraction, scanning electron microscopy, Fourier transform infrared, transmission electron microscopy, and ultraviolet spectra. The antibacterial properties of the prepared polyvinyl acetate/Ag nanocomposites were investigated as antimicrobial activity against pathogenic bacteria, i.e., Staphylococcus aureus (G^+ve bacteria) and Escherichia coli (G^?ve bacteria). These polyvinyl acetate nanocomposites could be used as a promising material for enhanced and continuous antibacterial applications as coating and packaging materials.     

Preparation and antibacterial activity of Ag/TiO2-functionalized ceramic tiles

An Ag/TiO₂ coating was deposited onto glazed ceramic tiles by a sol-gel and spraying method at high temperatures. The coating was characterized by X-ray diffraction, scanning electron microscopy, and atomic force microscopy. The results showed that silver was present in rutile-TiO₂, and the temperature did not change the phase composition of the samples. The Ag/TiO₂ coating had a higher roughness than the TiO₂ coating. The tape test (D 3359–08) showed that the coatings prepared at 950 °C and 1000 °C had good adhesion to the ceramic tile substrate. The antibacterial activity of the coating was tested by photocatalytic sterilization experiments. The results showed that the Ag/TiO₂ coating had a higher antibacterial activity than the TiO₂ coating, and the sterilization efficiency of Escherichia coli, Staphylococcus aureus, Shigella, and Salmonella exceeded 99.655% under 2 h of visible light irradiation. This research provides a method to create Ag/TiO₂ coatings with good thermal resistance, adhesion, and antibacterial activity. This improves the low photocatalytic activity caused by the anatase-to-rutile transformation of TiO₂ at high temperatures and the poor adhesion at low temperatures.     

Preparation and characterization of SiO2/polydopamine/Ag nanocomposites with long-term antibacterial activity

Silver nanoparticles (Ag NPs) with diameter of approximately 10 nm were prepared by the reduction of silver nitrate using green synthesis, an eco-friendly approach. The synthesized Ag NPs were homogeneously deposited on silicon dioxide (SiO₂) particles modified with dopamine, leading to the formation of SiO₂/polydopamine (PD)/Ag nanocomposites (NCs) with a core–shell–satellite structure investigated by transmission electron microscopy. The Ag content of SiO₂/PD/Ag NCs determined by inductively coupled plasma optical emission spectrometry was approximately 5.92 wt%. The antibacterial properties of both Ag NPs and SiO₂/PD/Ag NCs against Vibrio natriegens (V. natriegens) and Erythrobacter pelagi sp. nov. (E. pelagi) were investigated by bacterial growth curves and inhibition zone. Compared to Ag NPs, the SiO₂/PD/Ag NCs exhibited superior long-term antibacterial activity, attributed to its controlled release of Ag⁺ ions.     

Preparation of chitosan‐graft‐(methyl methacrylate)/Ag nanocomposite with antimicrobial activity

It has been found that composites of chitosan (CS) and Ag nanoparticles can exhibit excellent antibacterial activities. However, the weak mechanical performances of these composite materials limit their wide application. Grafting of vinyl monomers onto CS is one of the most effective methods to improve the performances of CS without sacrificing its properties. A nanocomposite of chitosan‐graft‐(methyl methacrylate) (CS‐g‐MMA) containing Ag nanoparticles was prepared by in situ chemical reduction of Ag ions in an aqueous acetic acid solution of CS and graft copolymerization of MMA onto CS. Transmission electron micrographs, X‐ray diffraction patterns and UV‐visible spectra of the nanocomposite confirmed the formation of Ag nanocrystals. X‐ray photoelectron spectroscopy proved that Ag? O bonds exist in the composite. Thermogravimetric analysis/differential scanning calorimetry showed that the decomposition temperature of CS was 319.8 °C while that of the CS‐g‐MMA/Ag composite shifted to a higher temperature of 422.1 °C. Antimicrobial experiments showed that the antimicrobial rates of the CS‐g‐MMA/Ag composite to E. coli, B. subtilis, S. aureus and P. aeruginosa were 93–98%. CS molecules can act as stabilizing agents to prevent the aggregation of Ag nanoparticles in the process of synthesizing CS‐g‐MMA/Ag nanocomposites. The antimicrobial activity of the as‐prepared nanocomposites is higher than that of CS alone. Copyright © 2009 Society of Chemical Industry     

Facile synthesis,antibacterial mechanisms and cytocompatibility of Ag–MnFe2O4 magnetic nanoparticles

Magnetic MnFe₂O₄ nanoparticles containing 0, 1 and 3 at.% silver, respectively were synthesized by one-pot sol-gel method for antibacterial applications in biomedical fields. Material characterizations indicate that MnFe₂O₄ begins crystallization at 134 °C and oxidation at 450 °C, the grain size and agglomeration degree increase with the silver content and silver exists as metallic state for the particles. The saturation magnetization decreases with the sintering temperature and slightly increases with the silver content, with the maximum of 50.0 emu/g obtained. Antibacterial tests by plate counting and PI-Hoechst 33342 staining suggest that the antibacterial activity of Ag–MnFe₂O₄ nanoparticles is silver content-dependent. Silver ions concentration measurement, β-galactosidase activity assay and transmission electron microscopic observation show that the antibacterial activity is dominated by the actions of the released silver ions, rather than the membrane cell impairment or reactive oxygen species-induced oxidative stress mechanism. MC3T3-E1 cell test demonstrates the best cytocompatibility of the nanoparticles with 3 at.% silver, which is likely related to the reduced cell endocytosis of the aggregated particles. The combination of magnetism, antibacterial activity and biocompatibility would make Ag–MnFe₂O₄ nanoparticles a potential multi-functional material in various biomedical applications.     

Microstructure,anti-corrosion and biological performance of Ag,Zn Co-doped titania coating: The influence of Zn contents

Bio-medical materials with sufficient antibacterial performance and osteogenic activity are desirable for orthopaedic implantable devices. In the present work, titanium (Ti) surface was modified through micro-arc oxidation in an electrolyte containing Ag nanoparticles (NPs) and disodium zinc ethylenediaminetetraacetate tetrahydrate (Na₂Zn-EDTA) to fabricate Ag, Zn co-doped titania coating, with the influence of Na₂Zn-EDTA content on its microstructure, corrosion behaviour and biological performances investigated systematically. By increasing the amount of Na₂Zn-EDTA from 5 g/L to 50 g/L, the coating exhibits a significantly reduced average pore size along with a decreased coating thickness. Further, unlike micro-sized dicalcium phosphate dehydrate (DCPD) crystals and Ag NP clusters for the coating produced by 5 g/L Na₂Zn-EDTA, both Ag NPs of a reduced amount and nano-sized amorphous Ca and P-rich components were observed on the coating surface when the electrolyte containing 50 g/L Na₂Zn-EDTA was used. The microstructural variation inevitably leads to the modification of its performances. The high amount of Na₂Zn-EDTA results in a bio-ceramic characterized by higher corrosion resistance, enhanced antibacterial capability and improved osteogenic activity relative to that fabricated with the addition of a low amount of Na₂Zn-EDTA. Therefore, this work provides a new strategy for the fabrication of bio-ceramics on Ti-based implants.     

Ultrasmall Ag nanocrystals supported on chitosan/PVA nanofiber mats with bifunctional properties

Bifunctional nanofiber mats consisting of chitosan (CS), poly(vinyl alcohol) (PVA), and silver nanocrystals (Ag NCs) have been fabricated by a facile electrospinning method. The formation and presence of Ag NCs supported on CS/PVA nanofibers are confirmed by ultraviolet‐visible spectroscopy and X‐ray diffraction. The morphology of the samples is characterized by transmission electron microscopy and scanning electron microscopy. The prepared Ag NCs/CS/PVA nanofiber mats show pronounced antibacterial activity against Escherichia coli and excellent filtration property for suspended particulate matter (SPM) particles. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46504.     

Biosynthesized Ag–ZnO nanohybrids exhibit strong antibacterial activity by inducing oxidative stress

We report facile biosynthesis of Ag–ZnO nanohybrids consisting of Ag nanoparticles decorated ZnO nanobullets prepared by decorating wet chemically synthesized ZnO nanobullets with Ag nanoparticles through bioreduction of Ag ⁺ ions with aqueous extract of Piper nigrum fruits. The prepared nanomaterials were well characterized by FESEM, TEM, HRTEM, EDX, XRD, XPS, PL and UV–vis spectroscopy. FESEM and TEM analyses on the nanohybrids revealed ∼18 nm Ag nanoparticles decorating ZnO nanobullets with average size ∼48 nm. XRD results revealed hexagonal wurtzite ZnO with 22.4 nm crystallite size and FCC Ag with 18.7 nm crystalline size. Ag–ZnO nanohybrids exhibited strong antibacterial action against Escherichia coli, Bacillus oceanisediminis and Pseudomonas entomophila and efficiently inhibited their growth at 100 μg/mL, 50 μg/mL and 125 μg/mL, respectively. The molecular basis of antibacterial action of Ag–ZnO nanohybrids against E. coli was investigated using different biochemical and molecular assays. Addition of antioxidant histidine suppressed the antibacterial action of Ag–ZnO nanohybrids towards E. coli due to its ROS scavenging action. Bradford assay results showed enhanced protein leakage from Ag–ZnO nanohybrids treated E. coli, while TBARS assay results confirmed lipid peroxidation triggered by ROS. SEM on Ag–ZnO nanohybrids treated E. coli confirmed significant damage to the cell wall leading to morphology change. The antibacterial activity of Ag–ZnO nanohybrids against E. coli is mainly due to the ROS-induced oxidative stress, which caused enhanced lipid peroxidation, cell wall damage leading to significant protein leakage and DNA fragmentation.     

Study of antibacterial properties of polypropylene filled with surfactant‐coated silver nanoparticles

Medical applications require, in most cases, antibacterial protection. The use of silver (Ag) gives important antibacterial properties since silver is highly toxic for bacteria. In this research work, we have used silver nanoparticles (Ag NPs) with different surfactants, polyvinyl pyrrolidone (PVP) and oleic acid (OA) to facilitate dispersion. PP‐Ag NPs compounds were prepared by melt mixing, and the effects of the processing conditions on nanoparticles' dispersion were investigated by transmission electron microscopy (TEM). The antibacterial efficiency of PP‐Ag NPs compounds against Staphylococcus aureus ATCC 6538 and Escherichia coli ATCC 8379 was evaluated. Results show that good dispersion is obtained with rotating speeds in the 350–500 rpm range. TEM analysis reveals balanced dispersion and presence of some Ag NPs aggregates. Regarding antimicrobial properties, the use of PVP as surfactant leads to “significant” antimicrobial activity of 1.5 against Staphylococcus aureus and Escherichia coli; on other hand, the use of oleic acid (OA) as surfactant leads to strong protection against Staphylococcus aureus (antimicrobial activity between 2.5 and 3.3) but the overall protection against Escherichia coli is very low (lower than 1). Results show that the use of surfactants for Ag NPs has important effects on antibacterial properties of polypropylene filled with coated Ag NPs. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers     

Enhanced the dispersibility and permeability of silver nanoparticles over rGO grafted by positively-charged polyethyleneimine toward broad-spectrum sterilization

Silver nanoparticles (Ag NPs) are used as antimicrobial agents due to their high-efficiency, broad-spectrum disinfection activity. However, the agglomeration and stability problems caused by excessive release of silver ions (Ag⁺) have severely restricted their developments. Herein, a novel silver/polyethyleneimine/reduced graphene oxide (Ag/PEI/rGO) antibacterial material featuring good dispersibility and permeability was rationally designed, thus benefiting for the capture of bacteria due to the introducing of highly-cationic PEI modifier and controllable release of biocidal agents (Ag⁺). Compared with Ag/rGO, the Ag/PEI/rGO has excellent stability and shows a more efficient sterilization efficacy against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) with 100% germicidal efficiency with low orders of dozens of ppm. In addition, the outstanding biocompatibility of this Ag/PEI/rGO antibacterial material endows it with promising potential in sterilization applications, which is expected to solve the infection problem caused by bacterial biofilm formation.     

Antibacterial activities of novel nanocomposite biofilms of chitosan/phosphoramide/Ag NPs

Novel nanocomposite films of chitosan/phosphoramide/Ag NPs were prepared containing 1–5% of silver nanoparticles. The Ag NPs were synthesized according to the citrate reduction method. The XRD and SEM analysis of Ag NPs, chitosan (CS), phosphoramide (Ph), CS/Ph, CS/Ag NPs films and the nanocomposite films 1–5 containing CS/Ph/1–5% Ag NPs were investigated. The in vitro antibacterial activities were evaluated against four bacteria including two Gram‐positive Staphylococcus aureus (S. aureus), Bacillus cereus (B. cereus) and two Gram‐negative Escherchia coli (E. coli), Pseudomonas aeruginosa (P. aeruginosa) bacteria. Results revealed greater antibacterial effects of the films against Gram‐positive bacteria. Also, nanocomposite films containing higher percent of Ag NPs showed more antibacterial activities. POLYM. COMPOS. 36:454–466, 2015. © 2014 Society of Plastics Engineers     

In Vitro Biocompatibility and Antibacterial Activity of Electrospun Ag Doped HAp/PHBV Composite Nanofibers

The authors report herein in vitro antibacterial property and osteoblast biocompatibility of electrospun Ag doped HAp/PHBV (Ag-HAp/PHBV) composite nanofibers as an osteoconductive and antibacterial material for bone tissue engineering applications. Ag-HAp powders were synthesized and stable composite suspensions of Ag-HAp/PHBV were prepared with the aid of a cationic surfactant DTAB for the electrospinning process. Continuous and uniform composite nanofibers were generated within a diameter range of 400–900 nm. Obtained nanocomposite scaffolds provide a favorable environment for bone mineralization, SaOS-2 osteoblastic cell attachment and growth as well as they present antibacterial activity against E. coli and S. aureus bacteria without any noticeable cytotoxic effect.     

Mussel-inspired synthesis of silver nanoparticles as fillers for preparing waterborne polyurethane/Ag nanocomposites with excellent mechanical and antibacterial properties

Silver nanoparticles (AgNPs) were synthesized by a facile, mild and green method using dopamine as a reducing and stabilizing agent and were introduced to waterborne polyurethane (WPU) via an in situ emulsification method to prepare antibacterial nanocomposite films. The formation of AgNPs was characterized by UV–visible spectroscopy and XRD. The dispersion of AgNPs was confirmed by TEM and the thermal stability of WPU/Ag nanocomposites was confirmed by TGA. The results showed that AgNPs were uniformly dispersed in the WPU matrix. The introduction of AgNPs significantly improved the thermal stability of WPU films. With incorporation of 0.1 wt% AgNPs, a five-fold increase in the tensile strength was achieved without sacrificing the ultimate strain. The WPU/Ag nanocomposite films showed antibacterial activity against Escherichia coli and Staphylococcus aureus. © 2021 Society of Industrial Chemistry.     

聚多巴胺功能化纳米银粒子制备及抗菌性能研究

采用一步法,以聚多巴胺(PDA)为还原剂和保护剂,制备PDA功能化的纳米银粒子(PDA-nanoAg)。提出PDA-nanoAg合成机理,并考察其在水相中的分散稳定性。通过紫外-可见吸收分光光度计(UV-Vis)、透射电子显微镜(TEM)、傅里叶变换红外光谱仪(FTIR)对产物形貌和结构进行表征。采用肉汤稀释法测试PDAnanoAg的抗菌性能。结果表明,所制备的PDA-nanoAg平均粒径为50 nm,具有良好的稳定分散性;对埃希氏大肠杆菌(E.coli)、金黄色葡萄球菌(S.aureus)的最小抑菌浓度(MIC)为7.56 mg/L,最小杀菌浓度(MBC)为30.24mg/L。     

Synthesis of Starch-Stabilized Ag Nanoparticles and Hg2+ Recognition in Aqueous Media

The starch-stabilized Ag nanoparticles were successfully synthesized via a reduction approach and characterized with SPR UV/Vis spectroscopy, TEM, and HRTEM. By utilizing the redox reaction between Ag nanoparticles and Hg²⁺, and the resulted decrease in UV/Vis signal, we develop a colorimetric method for detection of Hg²⁺ ion. A linear relationship stands between the absorbance intensity of the Ag nanoparticles and the concentration of Hg²⁺ ion over the range from 10 ppb to 1 ppm at the absorption of 390 nm. The detection limit for Hg²⁺ ions in homogeneous aqueous solutions is estimated to be ~5 ppb. This system shows excellent selectivity for Hg²⁺ over other metal ions including Na⁺, K⁺, Ba²⁺, Mg²⁺, Ca²⁺, Fe³⁺, and Cd²⁺. The results shown herein have potential implications in the development of new colorimetric sensors for easy and selective detection and monitoring of mercuric ions in aqueous solutions.     

Preparation,characterization, and antibacterial properties of silver nanoparticles embedded into cellulose aerogels

In this article, highly loaded silver (Ag) nanoparticles with mean diameter of about 7.83 nm were synthesized by reducing Ag ions by NaBH₄ with strong reducibility, and homogeneously embedded into cellulose aerogels without obvious reunion. The as‐prepared nano‐Ag/cellulose (NAC) aerogels maintained nanoporous and multiscale morphology similar to the pure cellulose aerogels, and showed strong antibacterial activities for both Escherichia coli (Gram negative) and Staphylococcus aureus (Gram positive). Meanwhile, after the incorporation of Ag nanoparticles, NAC aerogels also displayed more superior thermal stability. Thus, the novel NAC aerogels might be expected to be used as various biomedical applications, especially green heat‐resistant high‐performance antibacterial materials. POLYM. COMPOS. 37:1137–1142, 2016. © 2014 Society of Plastics Engineers     

Excellent antimicrobial properties of mesoporous anatase TiO2 and Ag/TiO2 composite films

Optically transparent, crack-free, mesoporous anatase TiO₂ thin films were fabricated. The Ag/TiO₂ composite films were prepared by incorporating Ag in the pores of TiO₂ films with an impregnation method via photoreduction. The as-prepared composite films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectronic spectra (XPS) and N₂ adsorption. The release behavior of silver ions in the mesoporous composite film was also studied. Moreover, the antimicrobial behaviors of the mesoporous film were also investigated by confocal laser scanning microscopy. The antibacterial activities of the composite films were studied by a fluorescence label method using Escherichia coli (E. coli) as a model. The as-prepared mesoporous TiO₂ films showed much higher antimicrobial efficiency than that of glass and commercial P25 TiO₂ spinning film. The facts would result from the high surface area, small crystal size and more active sites for the mesoporous catalysis. After the doping of Ag, a significant improvement for the antimicrobial ability was obtained. To elucidate the roles of the membrane photocatalyst and the doped silver in the antimicrobial activity, cells from a silver-resistant E. coli were used. These results indicated that Ag nanoparticles in the mesoporous were not only an antimicrobial but also an intensifier for photocatalysis. The as-prepared mesoporous composite film is promising in application of photocatalysis, antimicrobial and self-clean technologies.     

纳米Ag/TiO2复合材料的抗菌性能

采用Sol gel法制备掺杂不同质量分数银的纳米Ag/TiO2复合材料,研究了其对抗菌性能的影响。结果表明,银掺杂后的复合材料和应用其整理的纺织品不需紫外光照射就具有较强的抗菌性能,对大肠杆菌和金黄葡萄球菌的透明抑菌圈达到13～17mm。复合材料中银的掺杂能抑制粒径的长大,促进TiO2从锐钛型向金红石相的转移,但其质量分数对复合材料的抗菌性能影响不大。n(Ti)∶n(Ag)=20∶1时,复合材料的抗菌性能最佳,透明抑菌圈达到17mm。