Synthesis and biological activity of medium range molecular weight polymers containing exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthalimidocaproic acid

A new monomer, exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthalimidocaproic acid (ETCA), was prepared by reaction of maleimidocaproic acid and furan. The homopolymer of ETCA and its copolymers with acrylic acid (AA) or with vinyl acetate (VAc) were obtained by photopolymerizations using 2,2‐dimethoxy‐2‐phenylacetophenone as an initiator at 25 °C. The synthesized ETCA and its polymers were identified by FTIR, ¹H NMR and ¹³C NMR spectroscopies. The apparent average molecular weights and polydispersity indices determined by gel permeation chromatography (GPC) were as follows: M_n = 9600 g mol^?1, M_w = 9800 g mol^?1, M_w/M_n = 1.1 for poly(ETCA); M_n = 14 300 g mol^?1, M_w = 16 200 g mol^?1, M_w/M_n = 1.2 for poly(ETCA‐co‐AA); M_n = 17 900 g mol^?1, M_w = 18 300 g mol^?1, M_w/M_n = 1.1 for poly(ETCA‐co‐VAc). The in vitro cytotoxicity of the synthesized compounds against mouse mammary carcinoma and human histiocytic lymphoma cancer cell lines decreased in the following order: 5‐fluorouracil (5‐FU) ≥ ETCA > polymers. The in vivo antitumour activity of the polymers against Balb/C mice bearing sarcoma 180 tumour cells was greater than that of 5‐FU at all doses tested. © 2001 Society of Chemical Industry     

Synthesis and antitumour activity of medium molecular weight phthalimide polymers of camptothecin

Attachment of anticancer agents to polymers has been demonstrated to improve their therapeutic profiles. A new monomer containing camptothecin, 5‐norbonene‐endo‐2,3‐dicarboxylimidoundecanoyl‐camptothecin (NDUCPT) and its homopolymer and copolymer with acrylic acid (AA) were synthesized and spectroscopically characterized. The NDUCPT content in poly(NDUCPT‐co‐AA) obtained by elemental analysis was 51%. The average molecular weights of the polymers determined by gel permeation chromatography were as follows: M_n = 12 100, M_w = 23 400 g mol^?1, M_w/M_n = 1.93 for poly(NDUCPT), M_n = 15 400, M_w = 28 300 g mol^?1, M_w/M_n = 1.83 for poly(NDUCPT‐co‐AA). The IC₅₀ value of NDUCPT and its polymers against U937 cancer cells was larger than that of CPT. The in vivo antitumour activity of all polymers in Balb/C mice bearing the sarcoma 180 tumour cell line was greater than that of CPT at a dose of 100 mg kg^?1. Copyright © 2003 Society of Chemical Industry     

Synthesis and biological activity of medium molecular weight polymers containing 3,6‐endo‐methylene‐1,2,3,6‐tetrahydrophthalimidobutanoyl‐5‐fluorouracil

A new monomer, 3,6‐endo‐methylene‐1,2,3,6‐tetrahydrophthalimidobutanoyl‐5‐fluorouracil (ETBFU), was synthesized by reaction of 3,6‐endo‐methylene‐1,2,3,6‐tetrahydrophthalimidobutanoyl chloride and 5‐fluorouracil. The homopolymer of ETBFU and its copolymers with acrylic acid (AA) or vinyl acetate (VAc) were prepared by photopolymerization using 2,2‐dimethoxy‐2‐phenylacetophenone as an initiator at 25 °C. The synthesized ETBFU and its polymers were identified by FTIR, ¹H NMR and ¹³C NMR spectroscopies. The ETBFU content in poly(ETBFU‐co‐AA) and poly(ETBFU‐co‐VAc) was 43 and 14 mol%, respectively. The apparent number‐average molecular weight (M_n) of the polymers determined by GPC ranged from 8400 to 11 300. The in vitro cytotoxicity of the samples against mouse mammary carcinoma (FM3A), mouse leukaemia (P388), and human histiocytic lymphoma (U937) cancer cell lines decreased in the order 5‐FU ≥ ETBFU > poly(ETBFU) > poly(ETBFU‐co‐AA) > poly(ETBFU‐co‐VAc). The in vivo antitumour activity of the polymers against Balb/C mice bearing sarcoma 180 tumour cells was greater than that of 5‐fluorouracil at all doses tested. © 2000 Society of Chemical Industry     

Syntheses,antitumour activities and antiangiogenesis of 1,2,3‐tris(ethoxycarbonyl)‐2‐propyl acrylate and its polymers

A new monomer, 1,2,3‐tris(ethoxycarbonyl)‐2‐propyl acrylate (TPA), was synthesized by reaction of acryloyl chloride and triethyl citrate. The homopolymer of TPA and its copolymers with acrylic acid (AA), vinyl acetate (VAc) and maleic anhydride (MAH) were prepared by polymerization using lauroyl peroxide (LPO) at 70 °C for 24 h. The structures of TPA and its polymers were identified by FTIR, ¹H NMR, ¹³C NMR spectroscopies, and elemental analysis. The number average molecular weights and polydispersity indices of the synthesized polymers determined by GPC were in the range 4200–23 000 g mol^?1 and 1.1–2.1, respectively. The IC₅₀ values of the synthesized samples against cancer cell lines were greater than those of 5‐fluorouracil (5‐FU). The percentage inhibition values of SV40 DNA replication were 82.2 for TPA, 34.3 for poly (TPA), 81.9 for poly(TPA‐co‐AA), 82.0 for poly(TPA‐co‐VAc), 35.6 for poly(TPA‐co‐MAH) and 12.7 for 5‐FU. The inhibitions of SV40 DNA replication and antiangiogenesis for the synthesized TPA and its polymers are much greater than those of the control. © 2001 Society of Chemical Industry     

Synthesis,antitumour and DNA replication activities of polymers containing vinyl‐(5‐fluorouracil)‐ethanoate

A new monomer, vinyl‐(5‐fluorouracil)‐ethanoate (VFUE), was synthesized by reaction of 5‐fluorouracil (5‐FU) and vinyl iodoacetate. The homopolymer of VFUE and its copolymers with acrylic acid (A, A) and maleic anhydride (MAH) were prepared by photopolymerization. The synthesized VFUE and polymers were identified by FTIR, ¹H NMR and ¹³C NMR spectroscopies. The contents of VFUE unit in poly(VFUE‐co‐AA) and poly(VFUE‐co‐MAH) were 21 mol% and 16 mol%, respectively. The number average molecular weights of the polymers determined by gel permeation chromatography were in the range 9600–17900 g mol^?1. The in vitro cytotoxicities of the samples against a normal cell line decreased as follows: 5‐FU > VFUE > poly(VFUE) > poly(VFUE‐co‐AA) > poly(VFUE‐co‐MAH). The in vivo antitumour activities of the polymers against Balb/C mice bearing the sarcoma 180 tumour cells were greater than those of 5‐FU at all concentrations. The inhibition of simian virus 40 DNA replication by the samples was much greater than that of the control. © 2002 Society of Chemical Industry     

Preparation of poly(styrene‐b‐2‐hydroxyethyl acrylate) block copolymer using reverse iodine transfer polymerization

Reverse iodine transfer polymerizations (RITP) of 2‐h‐ydroxyethyl acrylate (HEA) were performed in N,N‐dimethylformamide at 75°C using AIBN as initiator. Poly(2‐hydroxyethyl acrylate) (PHEA) with M_n = 3300 g mol^?1 and M_w/M_n <1.5 were obtained. Homopolymerization of styrene in RITP was also carried out under similar conditions using toluene as solvent. The resulting iodo‐polystyrene (PS‐I) with (M_{n, SEC} = 607 g mol^?1, polydispersity index (PDI) = 1.31) was used as a macroinitiator for the synthesis of amphiphilic block copolymers based on HEA with controlled well‐defined structure. Poly(styrene‐b‐2‐hydroxyethyl acrylate) (PS‐b‐PHEA) with M_n = 13,000 g mol^?1 and polydispersity index (M_w/M_n) = 1.4 was obtained, copolymer composition was characterized using ¹H‐NMR and FTIR, whereas SEC and gradient HPLC were used to confirm the formation of block copolymer and the living character of polymer chains. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Homogeneous complex solution formed through interactions of poly(acrylamide‐co‐acrylic acid)/poly(acrylamide‐co‐dimethyldiallylammonium chloride) complex with M n+ hydration metal ions in aqueous media

A homogeneous complex solution, formed through inter‐polyelectrolyte complexation of poly(acrylamide‐co‐acrylic acid) (P(AM‐AA)) with poly(acrylamide‐co‐dimethyldiallylammonium chloride) (P(AM‐DMDAAC)) and interaction of the P(AM‐AA)/P(AM‐DMDAAC) complex with M ⁿ⁺ hydrated metal ion, was prepared and the structure and properties of the P(AM‐AA)/P(AM‐DMDAAC)/M ⁿ⁺ homogeneous complex solution were studied by UV spectrometry, dynamic light scattering and viscometry. The experimental results show that the homogeneous complex solution can be obtained by controlling the composition of the P(AM‐AA)/P(AM‐DMDAAC) complex and the M ⁿ⁺ metal ion content. Compared to the constituents, ie the P(AM‐AA) solution, the P(AM‐DMDAAC) solution and the P(AM‐AA)/P(AM‐DMDAAC) complex solution, the P(AM‐AA)/P(AM‐DMDAAC)/M ⁿ⁺ complex solution has a new peak at 270 nm in its UV spectrum, a larger hydrodynamic radius, and hence a higher solution viscosity, all of which indicate that there exist specific interactions between polymers and M ⁿ⁺ metal ions. These interactions lead to the formation of a network structure and hence an obvious increase not only in solution viscosity but also in resistance of the polymer solution to simple salts, to temperature changes and to shearing. © 2001 Society of Chemical Industry     

Synthesis and antitumour and antiangiogenesis activity of polymers containing methacryloyl‐2‐oxy‐1,2,3‐propane tricarboxylic acid

A new monomer, methacryloyl‐2‐oxy‐1,2,3‐propane tricarboxylic acid (MTCA), was synthesized from citric acid and methacrylic anhydride. Poly(methacryloyl‐2‐oxy‐1,2,3‐propane tricarboxylic acid) and poly(methacryloyl‐2‐oxy‐1,2,3‐propane tricarboxylic acid)‐co‐(maleic anhydride) were prepared by radical polymerizations. Terpoly(methacryloyl‐2‐oxy‐1,2,3‐propane tricarboxylic acid–maleic anhydride–furan) was obtained by in situ terpolymerization of MTCA and exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthalic anhydride. The synthesized samples were identified by FTIR, ¹H NMR and ¹³C NMR spectroscopies. The number‐average molecular weights of the fractionated polymers determined by GPC were in the range 14 900–16 600 and polydispersity indices were less than 1.14. The in vitro IC₅₀ values of the monomer and polymers against cancer and normal cell lines were much higher than those of 5‐fluorouracil (5‐FU). The in vivo antitumour activities of the synthesized samples at a dosage of 0.8 mg kg⁻¹ against mice bearing the sarcoma 180 tumour cell line decreased in the order terpoly(MTCA‐MAH‐FUR) > poly(MTCA‐co‐MAH) > poly(MTCA) > MTCA > 5‐FU. The synthesized samples inhibited DNA replication and angiogenetic activity more than did 5‐FU. © 2001 Society of Chemical Industry     

Electrochemical preparation of poly(N‐acetylaniline)/poly‐(4‐styrenesulfonic acid‐co‐maleic acid) composite film towards ascorbic acid sensing

Poly(N‐acetylaniline)/poly(4‐styrenesulfonic acid‐co‐maleic acid) (PNAANI/PSSMA) composite film was prepared by cyclic voltammetry (CV), and was characterized by FTIR and X‐ray photoelectron spectrum (XPS). The electroactivity of the composite film was high in neutral and basic solutions, and it had been used for amperometric determination of ascorbic acid (AA). Compared with pure PNAANI film, the catalytic activity of the composite film was much better. AA was detected amperometrically in sodium citrate buffer at a potential of 0.3 V (versus SCE). The response current was proportional to the concentration of ascorbic acid in the range of 4.7 × 10^?6 to 5.0 × 10^?5M and 5.0 × 10^?5 to 2.5 × 10^?3M, respectively, with the detection limit of 1.9 × 10^?6 mol L^?1 at a signal to noise ratio 3. In addition, the stability and reusability of the composite film were performed well, and it was satisfying to be used for determination of AA in real fruit juice samples. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characteristics of a novel aliphatic polycarbonate,poly[(propylene oxide)‐co‐(carbon dioxide)‐co‐(γ‐butyrolactone)]

A novel aliphatic polycarbonate, poly[(propylene oxide)‐co‐(carbon dioxide)‐co‐(γ‐butyrolactone)] [P(PO? CO₂? GBL)], was synthesized by the copolymerization of carbon dioxide, propylene oxide (PO) and γ‐butyrolactone (GBL). The resulting copolymers were determined by FTIR and NMR spectral analysis with viscosity‐average molecular weights (M_v) from 50 000 to 120 000 g mol^?1. According to elemental analysis, the calculated data of elemental contents in P(PO? CO₂? GBL)44 were close to the found data. The result showed that GBL was inserted into the backbone of poly[(propylene oxide)‐co‐(carbon dioxide)] successfully. GBL offered an ester structural unit that gave the copolymer better degradability. The correlations between reaction conditions and properties were studied. When GBL content increased, the M_v and the glass transition temperature (T_g) of the copolymers improved relative to an identical copolymer without GBL. Prolonging the reaction time of the copolymerization resulted in increases in M_v and T_g. P(PO? CO₂? GBL) exhibited a high T_g above 40 °C. The rate of backbone degradation increased with increasing GBL content. Copyright © 2005 Society of Chemical Industry     

Synthesis,characterization, conductivity,band gap,and kinetic of thermal degradation of poly‐4‐[(2‐mercaptophenyl) imino methyl] phenol

The oxidative polycondensation reaction conditions of 4‐[(2‐mercaptophenyl) imino methyl] phenol (2‐MPIMP) were studied in an aqueous acidic medium between 40 and 90°C by using oxidants such as air, H₂O₂, and NaOCl. The structures of the synthesized monomer and polymer were confirmed by FTIR, ¹H NMR, ¹³C NMR, and elemental analysis. The characterization was made by TGA‐DTA, size exclusion chromatography (SEC) and solubility tests. At the optimum reaction conditions, the yield of poly‐4‐[(2‐mercaptophenyl) imino methyl]phenol (P‐2‐MPIMP) was found to be 92% for NaOCl oxidant, 84% for H₂O₂ oxidant 54% for air oxidant. According to the SEC analysis, the number‐average molecular weight (M_n), weight‐average molecular weight (M_w), and polydispersity index values of P‐2‐MPIMP were found to be 1700 g mol^?1, 1900 g mol^?1, and 1.118, using H₂O₂; 3100 g mol^?1, 3400 g mol^?1, and 1.097, using air; and 6750 g mol^?1, 6900 g mol^?1, and 1.022, using NaOCl, respectively. According to TG analysis, the weight losses of 2‐MPIMP and P‐2‐MPIMP were found to be 95.93% and 76.41% at 1000°C, respectively. P‐2‐MPIMP showed higher stability against thermal decomposition. Also, electrical conductivity of the P‐2‐MPIMP was measured, showing that the polymer is a typical semiconductor. The highest occupied molecular orbital, the lowest unoccupied molecular orbital, and the electrochemical energy gaps (E′_g) of 2‐MPIMP and P‐2‐MPIMP were found to be ?6.13, ?6.09; ?2.65, ?2.67; and 3.48, 3.42 eV, respectively. Kinetic and thermodynamic parameters of these compounds investigated by MacCallum‐Tanner and van Krevelen methods. The values of the apparent activation energies of thermal decomposition (E_a), the reaction order (n), pre‐exponential factor (A), the entropy change (ΔS*), enthalpy change (ΔH*), and free energy change (ΔG*) were calculated from the TGA curves of compounds. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Highly fluorinated poly(ether‐imide)s derived from 2,2′‐bis(3,4,5‐trifluorophenyl)‐4,4′‐diaminodiphenyl ether and aromatic dianhydrides

A new diamine, 2,2′‐bis(3,4,5‐trifluorophenyl)‐4,4′‐diaminodiphenyl ether (FPAPE) was synthesized through the Suzuki coupling reaction of 2,2′‐diiodo‐4,4′‐dinitrodiphenyl ether with 3,4,5‐trifluorophenylboronic acid to produce 2,2′‐bis(3,4,5‐trifluorophenyl)‐4,4′‐dinitrodiphenyl ether (FPNPE), followed by palladium‐catalyzed hydrazine reduction of FPNPE. FPAPE was then utilized to prepare a novel class of highly fluorinated all‐aromatic poly(ether‐imide)s. The chemical structure of the resulting polymers is well confirmed by infrared and nuclear magnetic resonance spectroscopic methods. Limiting viscosity numbers of the polymer solutions at 25 °C were measured through the extrapolation of the concentrations used to zero. M_n and M_w of these polymers were about 10 000 and 25 000 g mol^?1, respectively. The polymers showed a good film‐forming ability, and some characteristics of their thin films including color and flexibility were investigated qualitatively. An excellent solubility in polar organic solvents was observed. X‐ray diffraction measurements showed that the fluoro‐containing polymers have a nearly amorphous nature. The resulting polymers had T_g values higher than 340 °C and were thermally stable, with 10% weight loss temperatures being recorded above 550 °C. Based on the results obtained, FPAPE can be considered as a promising design to prepare the related high performance polymeric materials. Copyright © 2011 Society of Chemical Industry     

Preparation of high‐molecular‐weight poly(L‐lactic acid)‐based polymers through direct condensation polymerization in bulk state

Poly(L ‐lactic acid‐co‐succinic acid‐co‐1,4‐butanediol) (PLASB) was synthesized by a direct condensation copolymerization of L ‐lactic acid, succinic acid (SA), and 1,4‐butanediol (BD) in bulk state using titanium(IV) butoxide (TNBT) as a catalyst. Weight average molecular weight (M_w) of PLASB increased from 3.5 × 10⁴ to 2.1 × 10⁵ as the content of SA and BD went up from 0.01 to 0.5 mol/100 mol of L ‐lactic acid (LA). PLASB having M_w in the range from 1.8 × 10⁵ to 2.1 × 10⁵ showed tensile properties comparable to those of commercially available poly(L ‐lactic acid) (PLLA). In sharp contrast, homopolymerization of LA in bulk state produced PLLA with M_w as low as 4.1 × 10⁴, and it was too brittle to prepare specimens for the tensile tests. M_w of PLASB synthesized by using titanium(IV)‐2‐ethyl(hexoxide), indium acetate, indium hydroxide, antimony acetate, antimony trioxide, dibutyl tin oxide, and stannous‐2‐ethyl 1‐hexanoate was compared with that of PLASB obtained by TNBT. Ethylene glycol oligomers with different chain length were added to LA/SA in place of BD to investigate effect of chain length of ethylene glycol oligomers on the M_w of the resulting copolymers. Biodegradability of PLASB was analyzed by using the modified Sturm test. Toxicity of PLASB was evaluated by counting viable cell number of mouse fibroblast cells that had been in contact with PLASB discs. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 466–472, 2006     

Schiff base‐substituted polyphenol: synthesis,characterisation and non‐isothermal degradation kinetics

BACKGROUND: Polymers of phenols and aromatic amines have emerged as new materials in fields such as superconductors, coatings, laminates, photoresists and high‐temperature environments. The stability, kinetics and associated pollution of the thermal decomposition of oligophenols are of interest for the aforementioned fields. RESULTS: A new Schiff base polymer, derived from N,N′‐bis(2‐hydroxy‐3‐methoxyphenylmethylidene)‐2,6‐pyridinediamine, was prepared by oxidative polycondensation. Characterisations using Fourier transform infrared, UV‐visible, ¹H NMR and ¹³C NMR spectroscopy, thermogravimetric/differential thermal analysis, gel permeation chromatography, cyclic voltammetry and conductivity measurements were performed. The number‐average (M_n) and weight‐average molecular weight (M_w) and dispersity (D = M_w/M_n) of the polymer were found to be 61 000 and 94 200 g mol^?1 and 1.54, respectively. Apparent activation energies of the thermal decomposition of the polymer were determined using the Tang, Flynn–Wall–Ozawa, Kissinger–Akahira–Sunose and Coats–Redfern methods. The most likely decomposition process was a D_n deceleration type in terms of the Coats–Redfern and master plot results. CONCLUSION: The mechanism of the degradation process can be understood through the use of kinetic parameters obtained from various non‐isothermal methods. Copyright © 2009 Society of Chemical Industry     

Syntheses and Biological Activities of Polymers Containing 3′-Azido-3′-deoxythymidine

The new monomer, 5′-O-methacryloyl-3′-azido-3′-deoxythymidine (MAZT), was synthesized by the reaction of methacryloyl chloride and 3′-azido-3′-deoxythymidine (AZT). Poly(MAZT) and copolymers of MAZT with vinyl acetate (VAc) and maleic anhydride (MAH) were synthesized by radical polymerizations. The synthesized MAZT and polymers were identified by ¹H nuclear magnetic resonance (NMR), ¹³C NMR, elemental analysis and gel permeation chromatography. The quantities of MAZT units in poly(MAZT-co-VAc) and poly(MAZT-co-MAH) were 45 and 27 mol%, respectively. The weight average molecular weights of the polymers synthesized were in the range from 8800 to 17600. The in vitro cytotoxicities of samples against K562 human leukaemia cell line at 100 μg ml^-1 decreased in the following order: poly(MAZT-co-MAH) > poly(MAZT-co-VAc) > poly(MAZT) > MAZT > AZT. The in vivo anti-tumour activities of the polymers synthesized against Balb/C mice bearing sarcoma 180 tumour cells were greater than those of 5-fluorouracil at all concentrations.     

Synthesis,physical properties,and crystallization of optically active poly(L‐phenyllactic acid) and poly(L‐phenyllactic acid‐co‐L‐lactic acid)

Optically active poly(L ‐phenyllactic acid) (Ph‐PLLA), poly(L ‐lactic acid) (PLLA), and poly(L ‐phenyllactic acid‐co‐L ‐lactic acid) with weight‐average molecular weight exceeding 6 × 10³ g mol^?1 were successfully synthesized by acid catalyzed direct polycondensation of L ‐phenyllactic acid and/or L ‐lactic acid in the presence of 2.5–10 wt % of p‐toluenesulfonic acid. Their physical properties and crystallization behavior were investigated by differential scanning calorimetry, thermogravimetry, and polarimetry. The absolute value of specific optical rotation ([α]) for Ph‐PLLA (?38 deg dm^?1 g^?1 cm³) was much lower than that of [α] for PLLA (?150 deg dm^?1 g^?1 cm³), suggesting that the helical nature was reduced by incorporation of bulky phenyl group. PLLA was crystallizable during solvent evaporation, heating from room temperature, and cooling from the melt. Incorporation of a very low content of bulky phenyllactyl units even at 4 mol % suppressed the crystallization of L ‐lactyl unit sequences during heating and cooling, though the copolymers were crystallizable for L ‐phenylactyl units up to 6 mol % during solvent evaporation. The activation energy of thermal degradation (ΔE_td) for Ph‐PLLA (200 kJ mol^?1) was higher than that for PLLA (158 kJ mol^?1). The ΔE_td for the copolymers increased with an increase in L ‐phenyllactyl unit content. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis,characterization, reactivity ratios by nuclear magnetic resonance spectroscopy,and application of (2,5‐Dichlorophenyl acrylate‐co‐glycidyl methacrylate) polymers as adhesives for the leather industry

2,5‐ Dichlorophenyl acrylate (DPA)‐co‐glycidyl methacrylate (GMA) polymers having five different compositions were synthesized in 1,4‐dioxane using benzoyl peroxide as a free‐radical initiator at 70 ± 0.5°C. Using ¹H‐NMR spectroscopy, the composition of the two monomers in the copolymers was calculated by comparing the integral values of the aromatic and aliphatic proton peaks. The reactivity ratios were calculated by Fineman–Ross (r₁ = 0.31 and r₂ = 1.08), Kelen–Tudos (r₁ = 0.40 and r₂ = 1.15), and extended Kelen–Tudos (r₁ = 0.39 and r₂ = 1.16) methods. The nonlinear error‐in‐variables model was used to compare the reactivity ratios. The copolymers were characterized by ¹H and proton decoupled ¹³C‐NMR spectroscopes. Gel permeation chromatography was performed for estimating the M_w and M_n and M_w/M_n of the poly(DPA) and copolymers (DPA‐co‐GMA: 09 : 91 and 50 : 50). Thermal stability of the homo‐ and copolymers was estimated using TGA [poly(DPA) > DPA‐co‐GMA (50 : 50) > DPA‐co‐GMA (09:91)], while DSC was utilized for determining the glass transition temperature. T_g increased with increased DPA content in the copolymer. The 50 : 50 mol % copolymer was chosen for curing with diethanolamine in chloroform. The cured resins were tested for the adhesive properties on leather at different temperatures (50, 90, 100, and 110°C). The resin cured at 50 °C exhibited a maximum peel strength of 1.6 N/mm, revealing a good adhesive behavior. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1167–1174, 2006     

Anionic polymerization of secondary aminostyrene and characterization of the polymer

Preparation by anionic living technique and characterization of poly(secondary aminostyrene) having narrow molecular weight distribution were investigated. N‐isopropyl‐N‐trimethylsilyl‐4‐vinylbenzylamine (SBA) was purified by use of sec‐butylmagnesium bromide as a purging reagent under high vacuum. SBA was anionically polymerized with n‐butyllithium or cumylpotassium in tetrahydrofuran at −78°C under high vacuum to yield the corresponding polymer (PSBA) in 100% yield. Subsequent deprotection of the trimethylsilyl group from PSBA produced poly(N‐isopropyl‐4‐vinylbenzylamine) (PBA) of the desired molecular weights (M_n: 1.3 × 10⁴–17 × 10⁴, determined by membrane osmometry) with narrow molecular weight distribution (M_w/M_n: 1.07–1.03, determined by gel permeation chromatography). The living lithium carbanion of PSBA can initiate styrene (St) to yield PSBA‐b‐PSt block copolymer (M_n = 4.0 × 10⁴, M_w/M_n = 1.05), and the polystyryllithium can initiate SBA to yield PSt‐b‐PSBA (M_n = 3.7 × 10⁴, M_w/M_n = 1.25). The deprotection of the trimethylsilyl group from the two block copolymers produced new block copolymers containing poly(secondary aminostyrene) block. Anionic reactivity of SBA and basic properties of PSBA are discussed in terms of the ¹³C chemical shift of β‐carbon in the vinyl group of SBA and steric effect. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 2039–2048, 1999     

Cross‐Linked Fluorinated Poly(Aryl Ether) (C‐FPAE) Films: Preparation Strategy,Performance Study,and Low Dielectric Applications

The production of low dielectric materials that can be used in high temperature environments is the primary aim of this work. A cross‐linked structure is introduced into fluorinated poly(aryl ether) (named as FPAE) with high molecular weight (M_w, 140 000 g mol^?1) and linear molecular structure using nucleophilic substitution reaction at the ortho‐position of decafluorobiphenyl monomer units in the FPAE molecular chain. The curing temperature and curing time are optimized and the final conditions for the cross‐linking reaction in this study are determined to be 300 °C for 1 h. Moreover, the dielectric constant and dielectric loss of the C‐FPAE film respectively are 2.67 and 0.006 at 1000 Hz when 1 wt% of crosslinking agent is added, and the cross‐linked fluorinated poly(aryl ether) film shows excellent thermal stability (T_d(5%), 495 °C), dimensional stability, hydrophobic properties, and high storage modulus in high temperature environments. Such novel low dielectric material with excellent performances has important application value in the aerospace and the integrated electronics field.     

Blue fluorescent conductive poly(9,10‐di(1‐naphthalenyl)‐2‐vinylanthracene) homopolymer and its highly soluble copolymers with styrene or 9‐vinylcarbazole

A new blue fluorescent monomer, 9,10‐di(1‐naphthalenyl)‐2‐vinylanthracene, was designed and synthesized in good yield. Its homopolymer poly(9,10‐di(1‐naphthalenyl)‐2‐vinylanthracene) (P(ADN)) and soluble conductive vinyl copolymers poly[(9,10‐di(1‐naphthalenyl)‐2‐vinylanthracene)‐co‐styrene] (P(ADN‐co‐S)) and poly[(9,10‐di(1‐naphthalenyl)‐2‐vinylanthracene)‐co‐(9‐vinylcarbazole)] (P(ADN‐co‐VK)) were synthesized using free radical solution polymerization. All the polymers showed high glass transition mid‐point temperatures (203 to 237 °C) and good thermal stabilities. The photoluminescence emission of the copolymers was similar to that of P(ADN) (with two maxima at 423 and 442 nm). The lifetimes of P(ADN‐co‐S) (6.82 to 7.91 ns) were all slightly less than that of P(ADN) (8.40 ns). The lifetime of P(ADN‐co‐VK) increased from 7.8 to 8.8 ns with an increase in VK content. The fluorescence quantum yields of P(ADN‐co‐S) showed an overall increasing tendency from 0.42 to 0.58. The quantum efficiencies of P(ADN‐co‐VK) decreased from 0.36 to 0.19 with an increase of VK fraction. With increasing S/VK content, the highest occupied molecular orbital of P(ADN‐co‐S)/P(ADN‐co‐VK) ranged from ?5.58 to ?5.73 eV, which was similar to that of P(ADN) (?5.71 eV). The band gaps of P(ADN‐co‐S) and P(ADN‐co‐VK) were about 2.97 eV, which were equal to that of P(ADN), and smaller than that of 2‐methyl‐9,10‐di(1‐naphthalenyl)anthracene (MADN) (3.04 eV) and poly(9‐vinylcarbazole) (3.54 eV). Preliminary electroluminescence results were obtained for a homojunction device with the configuration ITO/MoO₃ (20 nm)/P(ADN)/LiF (1 nm)/Al (100 nm), which achieved only 30–50 cd m^?2, due to P(ADN) having a low mobility of 4.7 × 10^?8 cm² V^?1 s^?1 compared to that of its model compound MADN of 6.5 × 10^?4 cm² V^?1 s^?1. © 2013 Society of Chemical Industry