Silver-doped titanium dioxide nanoparticles encapsulated in chitosan–PVA film for synergistic antimicrobial activity

The objective of the present study performed was to develop and characterize of silver (Ag)-doped titanium dioxide (TiO₂) naoparticles (NPs) encapsulated in chitosan–polyvinyl alcohol (PVA) film for synergistic antimicrobial activity. The acidic solution of chitosan with PVA was used for the reduction of silver ions into silver NPs using their functional groups such as hydroxyl, carboxyl, and amino groups. The chitosan–PVA silver nanoparticle films showed significant antimicrobial and antifungal activity against Staphylococcus aureus, Candida albicans, and Pseudomonas aeruginosa. Therefore, the present study is an alternative for conventional treatment as antimicrobial film showed synergistic, noninvasive, and economic effects.     

Studies on PVA/AgI-based polymeric membranes for exploration of antibacterial activity

In the present communication, solid polymer electrolyte films have been prepared using solution cast technique based on polyvinyl alcohol (PVA) as host polymer and silver iodide (AgI) as salt. The objective of the study is to develop PVA electrolytic films with AgI and evaluate to protect against simulants of biological warfare agents. The antibacterial activities of the films are explored against Aeromonas hydrophila, Escherichia coli, Salmonella typhii, and Shigella boydii. The antibacterial effects of the PVA/Ag⁺ hybrids were assessed by the minimum inhibitory concentration method. Polymer electrolyte films show good antibacterial activity against A. hydrophilla, S. typhii, and S. boydii. Scanning electron microscopy is used to study the surface morphology of the polymeric membranes. Complex impedance spectroscopy is used for characterizing the electrical and dielectric properties of the electrolyte samples. Frequency-dependent various dielectric properties such as dielectric constant, dielectric loss, and loss tangent have been discussed. The variations of AC conductivity gives the explanation in understanding the mechanism of the ion transport and determine power exponent value n lying in the range 1 and 1.2 which represents the trapping of ions in the polymer matrix.     

Novel polymaleimide containing dibenzoyl hydrazine pendant group as chelating agent for antimicrobial activity

Novel polymaleimide containing dibenzoyl hydrazine pendant group, poly[N-benzoyl-4-(N-maleimido)-phenyl hydrazide], and its metal complexes have been synthesized. Their antimicrobial activity against Bacillus subtilis, Streptococcus pneumoniae, Pseudomonas aeruginosa, and Escherichia coli bacteria and that against Aspergillus fumigatus, Syncephalastrum racemosum, Geotrichum candidum, and Candida albicans fungi were investigated. The polymer–metal complexes showed better antimicrobial activity than that of the parent polymer. The inhibition of the growth of the microbes remarkably depends on the type of the metal in the complexes. The polymer–Co(II) and the polymer–Cd(II) complexes are more potent in inhibition of the tested microbes growth than the rest of the prepared complexes.     

Antimicrobial action and clotting time of thin,hydrated poly(vinyl alcohol)/cellulose acetate films functionalized with LL37 for prospective wound-healing applications

Poly(vinyl alcohol)/cellulose acetate (PVA/CA) films were prepared via a new method that combines principles from solvent casting and phase inversion. To guarantee some degree of flexibility, films were produced with a higher percentage of PVA compared to CA, from 90/10 to 50/50. The antimicrobial peptide (AMP) LL37 was then anchored using dopamine as a binding agent. Films were characterized in terms of functional groups, thermal stability, tensile strength, porosity, swelling, and degradation (stability in physiological media at different pHs). The antimicrobial performance of LL37 surface-modified films was tested against Staphylococcus aureus, Staphylococcus epidermidis, and Escherichia coli in dynamic environment and in the presence and absence of an albumin interface. LL37 treated films demonstrated great antibacterial efficacy against the three kinds of bacteria, ≈75% inhibition for S. aureus, ≈85% for S. epidermidis, and ≈60% for E. coli, regardless of PVA/CA ratio. Presence of albumin reduced bacteria inhibition in all tested groups, most likely due to the binding of the protein molecules to the antimicrobial agents, reducing the free fraction available for bacterial killing. Films treated with LL37 accelerated clotting time (≈10 min) above vancomycin and bare surfaces, demonstrating great capacity to activate the intrinsic coagulation cascade. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48626.     

Thiazole derivatives‐functionalized polyvinyl chloride nanocomposites with photostability and antimicrobial properties

Polyvinyl chloride (PVC) was modified via substitution reaction with 2‐aminothiazole and ethyl 2‐aminothiazole‐4‐carboxylate separately in the absence and in presence of silver (AgNPs) or copper (CuNPs) nanoparticles, using metal salts as precursors, in 3% (w/w) with respect to PVC. The functionalized PVC‐nanocomposites have been characterized via FTIR, ¹HNMR spectroscopic analyses, in addition to the morphological investigation such as scanning (SEM) and transmission electron microscopy (TEM). Spectral data confirmed the introduction of the thiazole (ester) to the PVC backbone. TEM analysis showed that the sizes of the AgNPs and CuNPs have fallen in the range of 10–30 nm and 30–50 nm for the prepared nanocomposites, respectively. Evaluating the photostability of modified nanocomposites was estimated by following the extent of discoloration for UV‐irradiated samples colorimetrically in accordance with the irradiation time. The antimicrobial activity of the modified nanocomposites was explored against three Gram+ve bacteria (Bacillus subtilis, Staphylococcus aureus, and Streptococcus faecalis), three Gram‐ve bacteria (Escherichia coli, Neisseria gonorrhoeae, and Pseudomonas aeruginosa), and two fungi (Candida albicans and Aspergillus flavus). Aminothiazole (ester)‐functionalized PVC exhibited significant antimicrobial efficiencies against the investigated pathogens. However, incorporation of AgNPs or CuNPs to the modified PVC enhanced their inhibitory effect against the microorganisms under investigation. J. VINYL ADDIT. TECHNOL., 25:E137–E146, 2019. © 2018 Society of Plastics Engineers     

Study of antibacterial properties of polypropylene filled with surfactant‐coated silver nanoparticles

Medical applications require, in most cases, antibacterial protection. The use of silver (Ag) gives important antibacterial properties since silver is highly toxic for bacteria. In this research work, we have used silver nanoparticles (Ag NPs) with different surfactants, polyvinyl pyrrolidone (PVP) and oleic acid (OA) to facilitate dispersion. PP‐Ag NPs compounds were prepared by melt mixing, and the effects of the processing conditions on nanoparticles' dispersion were investigated by transmission electron microscopy (TEM). The antibacterial efficiency of PP‐Ag NPs compounds against Staphylococcus aureus ATCC 6538 and Escherichia coli ATCC 8379 was evaluated. Results show that good dispersion is obtained with rotating speeds in the 350–500 rpm range. TEM analysis reveals balanced dispersion and presence of some Ag NPs aggregates. Regarding antimicrobial properties, the use of PVP as surfactant leads to “significant” antimicrobial activity of 1.5 against Staphylococcus aureus and Escherichia coli; on other hand, the use of oleic acid (OA) as surfactant leads to strong protection against Staphylococcus aureus (antimicrobial activity between 2.5 and 3.3) but the overall protection against Escherichia coli is very low (lower than 1). Results show that the use of surfactants for Ag NPs has important effects on antibacterial properties of polypropylene filled with coated Ag NPs. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers     

Antimicrobial Activity of Pd‐Doped ZnO Sol‐Gel‐Derived Films

Palladium doped ZnO was prepared by the sol‐gel and dip‐coating techniques, starting with zinc acetate and palladium chloride as precursors, followed by its hydrolysis in methanol. Acetic acid was incorporated to adjust pH, as well as acetylacetonate and monoehtylamine as stabilizers. The sol was later dipped 3 times in silica substrates. Structural, morphological, and antimicrobial properties of the films were investigated for three palladium contents (1.0, 2.5, and 5 mol %). X‐ray diffraction (XRD) showed that the films have a hexagonal structure after been annealed at 500°C. X‐ray photoelectron Spectroscope (XPS) showed that Pd is present in its oxidized form. Atomic force microscopy (AFM) from films showed a crack free and smooth surface (Ra= 18 nm), composed of cross‐linked particles. The synthesized films presented antibacterial activity against Escherichia coli and Pseudomona aeruginosa. It was observed that the higher Pd content (5 mol %) presents the higher antimicrobial ratio, 64.07%, for the E. coli, whereas for the P. aeruginosa, the lower Pd content (1 mol %), shows the higher antimicrobial ratio, 76.43%.     

Biodegradability, antimicrobial activity and properties of PVA/PVP hydrogels prepared by γ-irradiation

Polyvinyl alcohol/polyvinyl pyrrolidone (PVA/PVP) hydrogel has been prepared by using γ-irradiation technique. In the present study the conclusion on miscibility of PVA/PVP blends, confirmed qualitatively and quantitatively by using Fourier transform infrared spectroscopy and differential scanning calorimetry, respectively. PVA and PVP are found to form a thermodynamically miscible pair. The physical properties such as gel fraction and water absorption performance of the prepared hydrogels were measured, it was found that the gel fraction increases with increasing irradiation dose while the swelling of PVA/PVP blended hydrogels nearly tends to increase with increasing PVP content and reduced with enhanced irradiation doses. The hydrogel pore structure of various PVA/PVP compositions were tested with SEM. Ability of PVA/PVP hydrogels to absorb and release antimicrobial compounds was tested using amoxicillin as an antibacterial and ketoconazole as an antifungal. Antimicrobial activity of PVA/PVP hydrogels was examined using four bacteria, and four fungi. No antibacterial or antifungal activities of non-loaded PVA/PVP of various compositions were detected while the loading ones found to have antimicrobial activity. Results showed resistance of Pseudomonas aeruginosa and Candida albicans to PVA/PVP, while Bacillus subtilis was very sensitive. Biodegradation of PVA/PVP hydrogels was investigated by burial method in two types of local soils (clay and sandy soils). The highest degradation rate was found to be achieved using clay soil. Also, effect of irradiation dose on its biodegradability was tested. The results showed that the radiation prepared PVA/PVP hydrogels can be use as biomaterials.     

Preparation and antibacterial activity of polyvinyl alcohol/regenerated silk fibroin composite fibers containing Ag nanoparticles

Polyvinyl alcohol (PVA)/regenerated silk fibroin (SF)/AgNO₃ composite nanofibers were prepared by electrospinning. A large number of nanoparticles containing silver were generated in situ and well‐dispersed nanoparticles were confirmed by transmission electron microscopy (TEM) intuitionally. Ultraviolet (UV)‐visible spectroscopy and X‐ray diffraction (XRD) patterns indicated that nanoparticles containing Ag were present both in blend solution and in composite nanofibers after heat treatment and after subsequent UV irradiation. By annealing the nanofibers, Ag⁺ therein was reduced so as to produce nanoparticles containing silver. By combining heat treatment with UV irradiation, Ag⁺ was transformed into Ag clusters and further oxidized into Ag₃O₄ and Ag₂O₂. Especially size of the nanoparticles increased with heat treatment and subsequent UV irradiation. This indicated that the nanoparticles containing silver could be regulated by heat treatment and UV irradiation. The antimicrobial activity of heat‐treated composite nanofibers was evaluated by Halo test method and the resultant nanofibers showed very strong antimicrobial activity. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Antibacterial poly(vinyl alcohol) film containing silver nanoparticles: Preparation and characterization

The importance of antibacterial materials for biomedical applications is growing nowadays. The presented article deals with the characterization of structural, mechanical and thermal properties and of antibacterial polymeric films based on polyvinyl alcohol (PVA) and silver nitrate, which can find their applicability in wound dressing components and protective coating. The methods of transmission electron microscopy, UV–vis and XRD spectroscopy, optical microscopy, differential scanning calorimetry, stress–strain analysis, and agar diffusion test were used to characterize the polymer films prepared. The results showed strong antibacterial activity against Escherichia coli and Staphylococcus aureus already at the lowest addition level of silver nitrate. An improvement of mechanical properties (Young's modulus) was also noticed due to a modification of PVA with silver nitrate up to 1 wt. % of silver content. Furthermore, the results show a strong effect of the thermal history of the sample preparation on the degree of silver‐ion reduction and formation of nanoparticles. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Ultrasmall Ag nanocrystals supported on chitosan/PVA nanofiber mats with bifunctional properties

Bifunctional nanofiber mats consisting of chitosan (CS), poly(vinyl alcohol) (PVA), and silver nanocrystals (Ag NCs) have been fabricated by a facile electrospinning method. The formation and presence of Ag NCs supported on CS/PVA nanofibers are confirmed by ultraviolet‐visible spectroscopy and X‐ray diffraction. The morphology of the samples is characterized by transmission electron microscopy and scanning electron microscopy. The prepared Ag NCs/CS/PVA nanofiber mats show pronounced antibacterial activity against Escherichia coli and excellent filtration property for suspended particulate matter (SPM) particles. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46504.     

Antibacterial electrospun chitosan/poly(vinyl alcohol) nanofibers containing silver nitrate and titanium dioxide

Chitosan/poly(vinyl alcohol) (PVA) nanofibers with antibacterial activity were prepared by the electrospinning of a chitosan/PVA solution with a small amount of silver nitrate (AgNO₃) and titanium dioxide (TiO₂). Nanofibers with diameters of 270–360 nm were obtained. The yield of low‐viscosity chitosan (LCS)/PVA nanofibers was higher than that of high‐viscosity chitosan (HCS)/PVA, and the water content of the HCS/PVA nanofibers and the LCS/PVA nanofibers were 430 and 390%, respectively. The nanofibers developed in this study exhibited antibacterial activities of 99 and 98% against Staphylococcus aureus and Escherichia coli, respectively. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Electrospun nylon 6 nanofibers incorporated with 2‐substituted N‐alkylimidazoles and their silver(I) complexes for antibacterial applications

The article presents the incorporation of biocides [2‐substituted N‐alkylimidazoles and their silver(I) complexes] into electrospun nylon 6 nanofibers for application as antimicrobial materials. The electrospun nylon 6/biocides nanofiber composites were characterized by IR spectroscopy (ATR‐FTIR) and scanning electron microscopy (SEM‐EDX). The antimicrobial activity of the electrospun nylon 6/biocides nanofiber composites was evaluated against Escherichia coli, Staphylococcus aureus, and Bacillus subtilis subsp. spizizenii using the disk diffusion method, the American Association for Textile Chemists and Colorists test method 100‐2004 and the dynamic shake flask method (American Society for Testing and Materials E2149‐10). The electrospun nylon 6 nanofibers incorporated with 2‐substituted N‐alkylimidazoles displayed moderate to excellent levels of growth reduction against S. aureus (73.2–99.8%). For the electrospun nylon 6 nanofibers incorporated with silver(I) complexes, the levels of growth reduction were >99.99%, for both E. coli and S. aureus, after the antimicrobial activity evaluation using the shake flask method. The study demonstrated that the electrospun nanofibers, fabricated using the incorporation strategy, have the potential to be used as attractive antimicrobial materials. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39783.     

Preparation and antibacterial effects of PVA‐PVP hydrogels containing silver nanoparticles

The poly(vinyl alcohol)/poly(N‐vinyl pyrrolidone) (PVA–PVP) hydrogels containing silver nanoparticles were prepared by repeated freezing–thawing treatment. The silver content in the solid composition was in the range of 0.1–1.0 wt %, the silver particle size was from 20 to 100 nm, and the weight ratio of PVA to PVP was 70 : 30. The influence of silver nanoparticles on the properties of PVA–PVP matrix was investigated by differential scanning calorimeter, infrared spectroscopy and UV–vis spectroscopy, using PVA–PVP films containing silver particles as a model. The morphology of freeze‐dried PVA–PVP hydrogel matrix and dispersion of the silver nanoparticles in the matrix was examined by scanning electron microscopy. It was found that a three‐dimensional structure was formed during the process of freezing–thawing treatment and no serious aggregation of the silver nanoparticles occurred. Water absorption properties, release of silver ions from the hydrogels and the antibacterial effects of the hydrogels against Escherichia coli and Staphylococcus aureus were examined too. It was proved that the nanosilver‐containing hydrogels had an excellent antibacterial ability. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 125–133, 2007     

Biocompatible/bioabsorbable silver nanocomposite coatings

A novel biomass‐mediated method to synthesize cellulose‐stabilized silver nanoparticles (SNPs) and incorporate them into biocompatible/bioabsorbable poly‐L ‐lactic acid (PLLA) for producing SNP–PLLA nanocomposite thin films was developed and the antimicrobial efficacy and biocompatibility of the SNP–PLLA films were studied. The formation and coating morphology of SNPs were characterized with UV–visible spectrophotometry and transmission electron microscopy (TEM), and the release rate of silver ion from the SNP–PLLA films was determined by inductively coupled plasma‐optical emission spectrometry. Antimicrobial testing of the SNP–PLLA films performed with Staphylococcus aureus and Escherichia coli according to ISO 22196 standards demonstrated that the SNP–PLLA nanocomposite films with a SNP concentration of 700 ppm reduced colonies forming unit (CFU) counts by 99.8 and 99.99%, respectively. Despite the significant antimicrobial activity, the nanocomposite films with the same SNP concentration had little effect on the viability of human HeLa cells. This strategy that has been developed for the synthesis of nanoparticles and the formation of composite films demonstrates promise for reducing perioperative surgical site infections associated with indwelling devices. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Biodegradability,antibacterial properties,and ultraviolet protection of polyvinyl alcohol‐natural polyphenol blends

Polymer films of tea polyphenol (TP)/polyvinyl alcohol (PVA) were prepared by a solution casting. The films were studies for intermolecular interactions by Fourier transform infrared spectroscopy, the shifts in the major signals of IR for O H and C O absorption, and with varied intensities in the Fourier transform infrared spectroscopy spectra indicated intermolecular hydrogen bonded interaction between PVA and TP. The biodegradability of the PVA/TP blends is measured by soil burial test, the percentage weight loss of the PVA/TP blends increased with increasing TP content. And the antibacterial activity of PVA/TP blends was determined by shake flask test and three kinds of bacteria used were as follows: Staphylcoccus aures, Escherichia coli, and Proteus valgaris. The blends exhibit strong antibacterial activity against the three kinds of bacteria. According to the Australia/New Zealand standard, AS/NZS 4399:1996, the ultraviolet protective properties of the PVA/TP blends were evaluated and the result shows that the capacity of the ultraviolet protection for blends was extremely increased by adding TP to PVA. And all blends reach the highest level (50+) of the standard. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers     

Preparation,Antibacterial and Physicochemical Behavior of Chitosan/Ofloxacin Complexes

A novel chitosan derivative with ofloxacin (OFX) has been successfully prepared. The IR and 1H-NMR results revealed that the chitosan/ofloxacin (CH-OFX) complex exhibited an electrostatic interaction. The crystalline and surface morphology were analyzed by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The antimicrobial activity of the complexes against various micro-organisms viz. Escherichia coli, Bacillus subtilis, Pseudomonas aeruginosa and Staphylococcus aureus was tested. It was established that their antibacterial activity is up to four times greater than that of free quinolone drug and chitosan, probably due to the conjunction of favorable pharmacokinetics, excellent bacterial susceptibility and good stability towards metabolic degradation.     

Active packaging gelatin films based on chitosan/Arabic gum/coconut oil Pickering nano emulsions

This investigation intended at fabricating gelatin active packaging films based on nano-sized droplets of coconut oil emulsified by Pickering emulsion (PE) using chitosan/Arabic gum (CH/AG) nanoparticles (NPs) as a stabilizer and in the presence of titanium dioxide NP (TiO₂ NPs) as an extra antimicrobial agent. The developed films were characterized by attenuated total reflectance–Fourier transmittance infrared, X-ray diffraction, and scanning electron microscope. The antimicrobial, antioxidant, water vapor sorption isotherm, and mechanical properties of the prepared films were assessed. The (CH/AG) NPs weight ratios (1:1, 1:2, and 2:1) impact on particle size (PS), zeta potential, wettability, morphology, and in vitro cumulative release was investigated. The (CH/AG) NPs (1:2) exhibits the small PS (246.4 nm). (CH/AG) NPs and PE exhibit spherical and oval morphologies. The CH/AG (1:2) exhibits the higher water contact angle (85.7^o). At the oil volume fraction (α) = 1.0, nearly 81% of the entrapped oil released from the NPs. Gelatin films enriched with P at α = 1.0 exhibits two-fold increasing scavenging activity % (35.69 ± 0.56) compared with control film (14.8 ± 0.25). The films have a considerable antibacterial and antifungal activity for all test microorganism. However, control sample did not show antimicrobial activity against Bacillus cereus and Candida albicans.     

Nano boron nitride laminated poly(ethyl methacrylate)/poly(vinyl alcohol) composite films imprinted with silver nanoparticles as gas barrier and bacteria resistant packaging materials

Herein, nano boron nitride (BN) laminated poly(ethyl methacrylate) (PEMA)/poly(vinyl alcohol) (PVA) nanocomposite films are fabricated by using a simple in situ polymerization technique with incorporation of silver nanoparticles (Ag NPs). Structural investigations of PEMA/PVA/Ag@BN nanocomposite thin films are carried out by Fourier-transform infrared spectroscopy, dynamic light scattering, X-ray diffraction analysis, ¹H nuclear magnetic resonance, ¹³C nuclear magnetic resonance, and mass spectrometry. The change in morphology of PEMA/PVA matrix due to the reinforcement of BN platelets are identified by electron microscopic studies. The unique tortuous paths are achieved by the dispersion of BN platelets by which gas penetration is restricted with enhancing the barrier properties of the material by 6.5 folds at 5 wt% BN content as compared with neat PEMA/PVA. Acid and alkali resistant along with biodegradability behavior of as-synthesized nanocomposites are studied. From limiting oxygen index (LOI) results, it is found that the prepared materials are fire retardant in nature owing to effective reinforcement of BN layers. Antibacterial activities of PEMA/PVA/Ag@BN nanocomposite are studied by Xanthomonas citri or axonopodis pv. Citri, Escherichia coli, and Xanthomonas oryzae pv. Oryzae because of Ag NPs reinforcement. The substantial improvements in gas barrier, fire retardant, and antibacterial properties enable the materials for packaging application.     

Synthesis and Characterization of Cationic Surfactants Based on N‐Hexamethylenetetramine as Active Microfouling Agents

Four cationic surfactants of quaternary hexammonium silane chloride based on hexamethylenetetramine and alkyl chloride were synthesized. The chemical structures of the prepared cationic surfactants were elucidated using Fourier transform infrared (FT‐IR) spectroscopy and mass spectrometry analysis. The surface and thermodynamic properties of the prepared surfactants were also studied. The performance of these cationic surfactants as microfouling agents against two strains of Gram‐negative bacteria, namely, Pseudomonas aeruginosa and Escherichia coli, and two strains of Gram‐positive bacteria, namely, Staphylococcus aureus and Bacillus subtilis, were evaluated as antimicrobial agents. The results showed that the maximum antimicrobial activity was detected for N‐hexamethylenetetramine‐N‐ethyl silane ammonium trichloride (Ah). The maximum and minimum antimicrobial activities were 73 and 60 % against S. aureus and E. coli, respectively, at a concentration of 5 mg/l, pH 7, and 37 °C.