Reduced graphene oxide anchored with δ-MnO2 nanoscrolls as anode materials for enhanced Li-ion storage

We developed a one-pot in situ synthesis procedure to form nanocomposite of reduced graphene oxide (RGO) sheets anchored with 1D δ-MnO₂ nanoscrolls for Li-ion batteries. The as-prepared products were characterized by X-ray diffraction (XRD), Raman spectra, X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscope (FESEM) and transmission electron microscope (TEM). The electrochemical performance of the δ-MnO₂ nanoscrolls/RGO composite was measured by galvanostatic charge/discharge cycling and electrochemical impedance spectroscopy. The results show that the δ-MnO₂ nanoscrolls/RGO composite displays superior Li-ion battery performance with large reversible capacity and high rate capability. The first discharge and charge capacities are 1520 and 810 mAh g⁻¹, respectively. After 50 cycles, the reversible discharge capacity is still maintained at 528 mAh g⁻¹ at the current density of 100 mAh g⁻¹. The excellent electrochemical performance is attributed to the unique nanostructure of the δ-MnO₂ nanoscrolls/RGO composite, the high capacity of MnO₂ and superior electrical conductivity of RGO.     

Fabrication of manganese oxide/three-dimensional reduced graphene oxide composites as the supercapacitors by a reverse microemulsion method

Manganese oxide (MnO₂)/three-dimensional (3D) reduced graphene oxide (RGO) composites were prepared by a reverse microemulsion (water/oil) method. MnO₂ nanoparticles (3–20 nm in diameter) with different morphologies were produced and dispersed homogeneously on the macropore surfaces of the 3D RGO. Scanning electron microscopy and transmission electron microscopy were applied to characterize the microstructure of the composites. The MnO₂/3D RGO composites, which were annealed at 150 °C, displayed a significantly high specific capacitance of 709.8 F g⁻¹ at 0.2 A g⁻¹. After 1000 cycles, the capacitance retention was measured to be 97.6%, which indicates an excellent long-term stability of the MnO₂/3D RGO composites.     

High performance MnO2 nanoflower supercapacitor electrode by electrochemical recycling of spent batteries

MnO₂ nanoflower is prepared by electrochemical conversion of Mn₃O₄ obtained by heat treatment of spent zinc‒carbon batteries cathode powder. The heat treated and converted powders were characterized by TGA, XRD, FTIR, FESEM and TEM techniques. XRD analyses show formation of Mn₃O₄ and MnO₂ phases for the heat treated and converted powders, respectively. FESEM images indicate the formation of porous nanoflower structure of MnO_2, while, condensed aggregated particles are obtained for Mn₃O₄. The energy band gap of MnO₂ is obtained from UV‒Vis spectra to be 2.4 eV. The electrochemical properties are investigated using cyclic voltammetry, galvanostatic charge‒discharge and electrochemical impedance techniques using three-electrode system. The specific capacitance of MnO₂ nanoflower (309 F g⁻¹ at 0.1 A g⁻¹) is around six times higher than those obtained from the heat treated one (54 F g⁻¹ at 0.1 A g⁻¹). Moreover, it has high capacitance retention up to 93% over 1650 cycles. Impedance spectra of MnO₂ nanoflower show very small resistances and high electrochemical active surface area (340 m² g⁻¹). The present work demonstrates a novel electrochemical approach to recycle spent zinc-carbon batteries into high value supercapacitor electrode.     

MoO3/reduced graphene oxide composites as anode material for sodium ion batteries

MoO₃/reduced graphene oxide (MoO₃/RGO) composites were successfully prepared via a facile one-step hydrothermal method, and evaluated as anode materials for sodium ion batteries (SIBs). The crystal structures, morphologies and electrochemical properties of the as-prepared samples were characterized by X-ray diffraction, field-emission scanning electron microscopy, cyclic voltammetry, electrochemical impedance spectroscopy, and galvanostatic charge/discharge tests, respectively. The results show that the introduction of RGO can enhance the electrochemical performances of MoO₃/RGO composites. MoO₃/RGO composite with 6 wt% RGO delivers the highest reversible capacity of ~208 mA h g⁻¹ at 50 mA g⁻¹ after 50 cycles with good cycling stability and excellent rate performance for SIBs. The excellent sodium storage performance of MoO₃/RGO should be attributed to the synergistic effect between MoO₃ and RGO, which offers the increased electrical conductivity, the facilitated electron transfer ability and the buffering of volume expansion.     

Three-dimensional MnO/reduced graphite oxide composite films as anode materials for high performance lithium-ion batteries

MnO/reduced graphite oxide (MnO/RGO) composite films with three dimensionally porous structures have been synthesized by an improved electrostatic spray deposition setup and their microstructure and electrochemical properties have been characterized by X-ray diffraction, scanning electron microscopy, thermal gravimetric, Raman spectrometry and galvanostatic cell cycling. The results show that the structure and electrochemical performance of the electrode film are influenced significantly by the RGO content. The three dimensionally porous structure collapse does not occur in the MnO/RGO thin films for a RGO content lower than 16.58 wt%, the 16.58 wt% reduced graphite oxide content being optimal. Such an improvement in the cycling performance (772 mAh g⁻¹ after 100 cycles at 1 C) and rate capability (425 mAh g⁻¹ at 6 C) might be attributed to the excellent microstructure and electrical conductivity of MnO/reduced graphite oxide composite film electrodes.     

Highly mesoporous LaNiO3/NiO composite with high specific surface area as a battery-type electrode

This study reports the fabrication and characterization of mesoporous LaNiO₃/NiO composite with a very high specific surface area for a battery-type electrode. The mesoporous LaNiO₃/NiO composite was synthesized via a sol–gel method by using silica gel as a template, the colloidal silica gel was obtained by the hydrolysis and polymerization of tetraethoxysilane in the presence of La and Ni salts. We investigated the structure and the electrochemical properties of mesoporous LaNiO₃/NiO composite in detail. The mesoporous composite sample showed a specific surface area of 372 m² g⁻¹ with 92.7% mesoporous area and displayed remarkable electrochemical performance as a battery-type electrode material for supercapacitor. The specific capacity values were found to be 237.2 mAh g⁻¹ at a current density of 1 A g⁻¹ and 128.6 mAh g⁻¹ at a high current density of 20 A g⁻¹ in 1 M KOH aqueous electrolyte. More importantly, this mesoporous composite also showed an excellent cycling performance with the retention of 92.6% specific capacitance after 60,000 charging and discharging cycles.     

Reduced graphene oxide with superior cycling stability and rate capability for sodium storage

Sodium ion battery is a promising electrical energy storage system for sustainable energy storage applications due to the abundance of sodium resources and their low cost. In this communication, the electrochemical properties of sodium ion storage in reduced graphene oxide (RGO) were studied in an electrolyte consisting of 1 M NaClO₄ in propylene carbonate (PC). The experimental results show that the RGO anode allowed significant sodium ion insertion, leading to higher capacity at high current density compared to the previously reported results for carbon materials. This is due to the fact that RGO possesses higher electrical conductivity and is a more active host, with large interlayer distances and a disordered structure, enabling it to store a higher amount of Na ions. RGO anode exhibits high capacity combined with long-term cycling stability at high current densities, leading to reversible capacity as high as 174.3 mAh g⁻¹ at 0.2 C (40 mA g⁻¹), and even 93.3 mAh g⁻¹ at 1 C (200 mA g⁻¹) after 250 cycles. Furthermore, RGO could yield a high capacity of 141 mAh g⁻¹ at 0.2 C (40 mA g⁻¹) over 1000 cycles.     

One-step hydrothermal synthesis of Sb2S3/reduced graphene oxide nanocomposites for high-performance sodium ion batteries anode materials

Sb₂S₃/reduced graphene oxide (SSR) nanocomposites were successfully synthesized through a facile one-step hydrothermal process, as used as anode materials for sodium ion batteries (SIBs). The characterization and electrochemical performance of the as-prepared samples were characterized by X-ray diffraction, field-emission scanning electron microscopy, transmission electron microscopy, nitrogen adsorption-desorption isotherms, cyclic voltammetry, electrochemical impedance spectroscopy, and galvanostatic charge/discharge tests, respectively. The results show that the introduction of reduced graphene oxide (RGO) can improve the electrochemical performances of SSR nanocomposites. SSR nanocomposites with 10 wt% RGO exhibits the highest reversible capacity of 581.2 mAh g⁻¹ at the current density of 50 mA g⁻¹ after 50 cycles, and excellent rate performance for SIBs. The improved electrochemical performance is attributed to the smaller Sb₂S₃ nanoparticles dispersed on RGO crumpled structure and synergetic effects between Sb₂S₃ and RGO matrix, which can increase specific surface area and improve electrical conductivity, reduce sodium ion diffusion distance, and effectively buffer volume changes during cycling process.     

Electrospun ZnO–SnO2 composite nanofibers with enhanced electrochemical performance as lithium-ion anodes

ZnO–SnO₂ composite nanofibers with different structures were synthesized by a simple electrospinning approach with subsequent calcination at three different temperatures using polyacrylonitrile as the polymer precursor. The electrochemical performance of the composites for use as anode materials in lithium-ion batteries were investigated. It was found that the ZnO–SnO₂ composite nanofibers calcined at 700 °C showed excellent lithium storage properties in terms of cycling stability and rate capability, compared to those calcined at 800 and 900 °C, respectively. ZnO–SnO₂ composite nanofibers calcined at 700 °C not only delivered high initial discharge and charge capacities of 1450 and 1101 mAh g⁻¹, respectively, with a 75.9% coulombic efficiency, but also maintained a high reversible capacity of 560 mAh g⁻¹ at a current density of 0.1 A g⁻¹ after 100 cycles. Additionally, a high reversible capacity of 591 mAh g⁻¹ was obtained when the current density returned to 0.1 A g⁻¹ after 50 cycling at a high current density of 2 A g⁻¹. The superior electrochemical performance of ZnO–SnO₂ composite nanofibers can be attributed to the unique nanofibrous structure, the smaller particle size and smaller fiber diameter as well as the porous structure and synergistic effect between ZnO and SnO₂.     

A high capacity NiFe2O4/RGO nanocomposites as superior anode materials for sodium-ion batteries

NiFe₂O₄/reduced graphene oxide (NFO/RGO) nanocomposites were prepared by a facile one-step hydrothermal method and used as anode for sodium ion batteries (SIBs). The crystal structures, morphologies and electrochemical properties of as-prepared samples were evaluated by X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and galvanostatic charge/discharge tests. The results show that NFO/RGO-20 (20 wt%) delivers the highest reversible capacity of ~450 mA h g⁻¹ at 50 mA g⁻¹ after 50 cycles with good cycling stability. The excellent sodium storage performance of NFO/RGO should be attributed to the synergistic effect between NFO and RGO to form conductive network structure, which offers the increased specific surface area, the facilitated electron transfer ability and the buffering of volume expansion.     

Construction of hierarchical NiMoO4@MnO2 nanosheet arrays on titanium mesh for supercapacitor electrodes

Hierarchical NiMoO₄@MnO₂ nanosheet arrays supported on titanium mesh are synthesized by cost effective hydrothermal methods for binder-free electrode. High specific area of porous MnO₂nanosheets and exceptionally high pseudocapacitive behavior of NiMoO₄nanosheets lead to a specific capacitance of 976 F g⁻¹at a current density of 1 A g⁻¹ with pleasurable rate characteristic in three electrode configuration. The excellent electrochemical performances of the integrated electrode can be ascribed to the unique core-shell nanostructure and synergic interaction. It is believed that the hierarchical NiMoO₄@MnO₂ nanosheet arrays supported on titanium mesh can provide great prospect for energy storage applications.     

Highly efficient synthesis of graphene/MnO2 hybrids and their application for ultrafast oxidative decomposition of methylene blue

A highly efficient method has been reported to fabricate the reduced graphene oxide/MnO₂ (RGO/MnO₂) hybrid materials, a kind of catalysts for oxidative decomposition of methylene blue (MB). The pristine suspension of graphene oxide/manganese sulfate (GO/MnSO₄) produced by the modified Hummers method is in situ transformed into GO/MnO₂ composites in combination with KMnO₄, and then further into RGO/MnO₂ composites by means of glucose-reduction. It is found that MnO₂ nanoparticles with the size of 20–30 nm are uniformly distributed in the structure of RGO. A series of composites with different mass ratios of RGO to MnO₂ has been proved superior catalytic activities, much higher than that of the bare MnO₂ for decomposition of MB dye in the presence of H₂O₂. Typically, 50 mL of MB (50 mg L⁻¹) can be completely decolorized and nearly 66% mineralized at 50 °C in 5 min with 10 mg of the RGO/MnO₂ hybrid. According to the adsorption–oxidation–desorption mechanism, the high activity of RGO/MnO₂ composites for decomposition of MB is closely related to the positive synergistic effect of RGO and MnO₂ with the assistance of H₂O₂.     

Facile synthesis of NiMn2O4 nanosheet arrays grown on nickel foam as novel electrode materials for high-performance supercapacitors

Nanostructured spinel NiMn₂O₄ arrays have been fabricated by a facile hydrothermal approach and further investigated as binder-free electrode for high-performance supercapacitors. Compared with Mn₃O₄, NiMn₂O₄ exhibited higher specific capacitances (662.5 F g⁻¹ and 370.5 F g⁻¹ in different electrolytes at the current density of 1 A g⁻¹) and excellent cycling stability (~96% capacitance retention after 1000 cycles) in a three-electrode system. Such a novel microstructure grown directly on the conductive substrate provided sufficient active sites for redox reaction resulting in their enhanced electrochemical behaviors. Their improved performances suggested that ultrathin sheet-like NiMn₂O₄ arrays on Ni foam substrate were a promising electrode material for supercapacitors.     

Decoration of carbon cloth by manganese oxides for flexible asymmetric supercapacitors

Here we describe the production of carbon cloth coated with MnO₂ nanosheets or MnOOH nanorods through a normal temperature reaction or a hydrothermal approach, respectively. Of note, the electrochemical performance of MnO₂-coated carbon cloth was better (429.2 F g⁻¹) than that of MnOOH-coated carbon cloth. When the MnO₂-coated carbon cloth is introduced as the positive electrode and the Fe₂O₃-coated carbon cloth as the negative electrode, a flexible asymmetric supercapacitor was obtained with an energy density of 22.8 Wh kg⁻¹ and a power density of 159.4 W kg⁻¹. Therefore, such a hierarchical MnO₂-coated carbon cloth nanocomposite is a promising high-performance electrode for flexible supercapacitors.     

Porous Fe2O3 nanorods anchored on nitrogen-doped graphenes and ultrathin Al2O3 coating by atomic layer deposition for long-lived lithium ion battery anode

Porous iron oxide (Fe₂O₃) nanorods anchored on nitrogen-doped graphene sheets (NGr) were synthesized by a one-step hydrothermal route. After a simple microwave treatment, the iron oxide and graphene composite (NGr-I-M) exhibits excellent electrochemical performances as an anode for lithium ion battery (LIB). A high reversible capacity of 1016 mAh g⁻¹ can be reached at 0.1 A g⁻¹. When NGr-I-M electrode was further coated by 2 ALD cycles of ultrathin Al₂O₃ film, the first cycle Coulombic efficiency (CE), rate performance and cycling stability of the coated electrode can be greatly improved. A stable capacity of 508 mAh g⁻¹ can be achieved at 2 A g⁻¹ for 200 cycles, and an impressive capacity of 249 mAh g⁻¹ at 20 A g⁻¹ can be maintained without capacity fading for 2000 cycles. The excellent electrochemical performance can be attributed to the synergy of porous iron oxide structures, nitrogen-doped graphene framework, and ultrathin Al₂O₃ film coating. These results highlight the importance of a rational design of electrode materials improving ionic and electron transports, and potential of using ALD ultrathin coatings to mitigate capacity fading for ultrafast and long-life battery electrodes.     

Integration of tailored reduced graphene oxide nanosheets and electrospun polyamide-66 nanofabrics for a flexible supercapacitor with high-volume- and high-area-specific capacitance

Nanofiber fabric is firstly introduced to replace common microfiber fabrics as the platform for flexible supercapacitors. Nanofiber and microfiber electrodes can be simply fabricated using a dipping process that impregnates reduced graphene oxide (RGO) nanosheets into electrospun polyamide-66 (PA66) nanofiber and microfiber fabrics. RGO nanosheets are tailored to various sizes and only RGO with a medium diameter of 250–450 nm (denoted as M-RGO) can effectively penetrate the pores of nanofiber fabrics for constructing smooth conductive paths within PA66 nanofiber fabrics. The synergistic effect between suitable sizes of RGO nanosheets and nanofiber fabrics with a high specific area provides a symmetric supercapacitor composed of M-RGO/PA66 nanofiber fabric electrodes with high-volume and high-area specific capacitance (C_S,V and C_S,A, equal to 38.79 F cm⁻³ and 0.931 F cm⁻² at 0.5 A g⁻¹, respectively), which are much larger than that of a symmetric supercapacitor composed of RGO/PA66 microfiber fabric electrodes (8.52 F cm⁻³ and 0.213 F cm⁻² at 0.5 A g⁻¹). The effect of impregnating nanofiber fabrics with suitably sized RGO to promote C_S,V and C_S,A of flexible supercapacitors has been demonstrated.     

3D network-like porous MnCo2O4 by the sucrose-assisted combustion method for high-performance supercapacitors

3D network-like porous MnCo₂O₄ nanostructures have been successfully fabricated through a facile and scalable sucrose-assisted combustion route followed by calcination treatment. Benefiting from its advantages of the unique 3D network-like architectures with large specific surface area (216.15 m² g⁻¹), abundant mesoporosity (2–50 nm) and high electronic conductivity, the as-prepared MnCo₂O₄ electrode displays a high specific capacitance of 647.42 F g⁻¹ at a current density of 1 A g⁻¹, remarkable capacitance retention rate of 70.67% at current density of 10 A g⁻¹ compared with 1 A g⁻¹, and excellent cycle stability (only 6.32% loss after 3000 cycles). The excellent electrochemical performances coupled with facile and cost effective method will render the as-fabricated 3D network-like porous MnCo₂O₄ as a promising electrode material for supercapacitors.     

Functionalized three-dimensional graphene networks for high performance supercapacitors

Three-dimensional (3D) thermal reduced graphene network (TRGN) deposition on Ni foam without any conductive agents and polymer binders was successfully synthesized by dipping Ni foam into graphene oxide (GO) suspension and subsequent thermal reduction process. The direct and close contact between thermal reduced graphene and Ni foam is beneficial to the enhanced conductivity of the electrode, as well as the improvement of ion diffusion/transport into the electrode. Additionally, low-temperature reduction of GO possesses a large amount of stable oxygen-containing groups that can provide high pseudocapacitance. As a result, the TRGN electrode delivers a high specific capacitance of 442.8 F g⁻¹ at 2 mV s⁻¹ in 6 mol L⁻¹ KOH. Moreover, symmetric supercapacitor based on TRGN exhibits a maximum energy density of 30.4 Wh kg⁻¹ based on the total mass of the two electrodes in 1 mol L⁻¹ Na₂SO₄ electrolyte, as well as excellent cycling stability with 118% of its initial capacitance after 5000 cycles.     

Cathode materials based on carbon nanotubes for high-energy-density lithium–sulfur batteries

The rational integration of conductive nanocarbon scaffolds and insulative sulfur is an efficient method to build composite cathodes for high-energy-density lithium–sulfur batteries. The full demonstration of the high-energy-density electrodes is a key issue towards full utilization of sulfur in a lithium–sulfur cell. Herein, carbon nanotubes (CNTs) that possess robust mechanical properties, excellent electrical conductivities, and hierarchical porous structures were employed to fabricate carbon/sulfur composite cathode. A family of electrodes with areal sulfur loading densities ranging from 0.32 to 4.77 mg cm⁻² were fabricated to reveal the relationship between sulfur loading density and their electrochemical behavior. At a low sulfur loading amount of 0.32 mg cm⁻², a high sulfur utilization of 77% can be achieved for the initial discharge capacity of 1288 mAh g_S⁻¹, while the specific capacity based on the whole electrode was quite low as 84 mAh g_{C/S+binder+Al}⁻¹ at 0.2 C. Moderate increase in the areal sulfur loading to 2.02 mg cm⁻² greatly improved the initial discharge capacity based on the whole electrode (280 mAh g_{C/S+binder+Al}⁻¹) without the sacrifice of sulfur utilization. When sulfur loading amount further increased to 3.77 mg cm⁻², a high initial areal discharge capacity of 3.21 mAh cm⁻² (864 mAh g_S⁻¹) was achieved on the composite cathode.     

Fabrication of highly insulating foam glass made from CRT panel glass

We prepared low-density foam glasses from cathode-ray-tube panel glass using carbon and MnO₂ as the foaming agents. We investigated the influence of the carbon and MnO₂ concentrations, the glass-powder preparation and the foaming conditions on the density and homogeneity of the pore structure and the dependence of the thermal conductivity on the foam density. The results show that the moderate foaming effect of the carbon is greatly improved by the addition of MnO₂. A density as low as 131 kg m⁻³ can be achieved with fine glass powder. The foam density has a slight dependence on the carbon and MnO₂ concentrations, but it is mainly affected by the foaming temperature and the time. The thermal conductivity of the foam-glass samples is lower than that of commercial foam glasses with the same density. The lowest value was determined to be 42 mW m⁻¹ K⁻¹ for a foam glass with a density of 131 kg m⁻³. A further improvement in the closed porosity could potentially decrease the thermal conductivity even further, and thus our approach has great potential in terms of a thermal insulation material.