Hydrothermal processing and in situ surface modification of metal oxide nanomaterials

In situ surface modification of TiO₂ and ZnO metal oxide particles has been carried out under hydrothermal conditions within a wide range of temperature and pressure (T = 150–400 °C; P = up to 20 MPa). The influence of the surfactant and selective doping with active metal ions on the crystal size, morphology, and photocatalytic activity of TiO₂ and ZnO particles has been carried out. A systematic characterization of the product has been carried out using powder XRD, FTIR, TGA, SEM/TEM, and UV–vis spectroscopy. Similarly the photocatalytic activity in these metal oxides varies with the size, shape and dopant metals.     

Effect of carbon doping on WO3/TiO2 coupled oxide and its photocatalytic activity on diclofenac degradation

The improved photocatalyst carbon-doped WO₃/TiO₂ mixed oxide was synthesized in this study using the sol–gel method. The catalyst was thoroughly characterized by X-ray diffraction (XRD), diffuse reflectance UV–vis spectroscopy, N₂ adsorption desorption analysis, scanning electron microscopy coupled with energy dispersive X-ray analysis (SEM/EDX), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The photocatalytic efficiency of the prepared materials was evaluated with respect to the degradation of sodium diclofenac (DCF) in a batch reactor irradiated under simulated solar light. The progress of the degradation process of the drug was evaluated by high-performance liquid chromatography (HPLC), whereas mineralization was monitored by total organic carbon analysis (TOC) and ion chromatography (IC). The results of the photocatalytic evaluation indicated that the modified catalyst with tungsten and carbon (TWC) exhibited higher photocatalytic activity than TiO₂ (T) and WO₃/TiO₂ (TW) in the degradation and mineralization of diclofenac (TWC>TW>T). Complete degradation of diclofenac occurred at 250 kJ m⁻² of accumulated energy, whereas 82.4% mineralization at 400 kJ m⁻² was achieved using the photocatalytic system WO₃/TiO₂-C. The improvement in the photocatalytic activity was attributed to the synergistic effect between carbon and WO₃ incorporated into the TiO₂ structure.     

Residence time distribution analysis and optimization of photocatalysis of phenazopyridine using immobilized TiO2 nanoparticles in a rectangular photoreactor

Optimization of photocatalytic degradation of phenazopyridine (PhP) under UV light irradiation using immobilized TiO₂ nanoparticles was studied. The effect of operational parameters was investigated using response surface methodology (RSM). Maximum removal efficiency was achieved at the optimum conditions: initial drug concentration of 10 mg/L, UV light intensity of 47 W/m², flow rate of 200 mL/min, and reaction time of 150 min. The residence time distribution (RTD) analysis was studied to find the effect of flow rate on the drug removal efficiency. The tracer (PhP) pulse injection response was studied with UV–vis measurements and was used to prepare RTD curves.     

Growth mechanism and photocatalytic activity of chrysanthemum-like anatase TiO2 nanostructures

Chrysanthemum-like hierarchical anatase TiO₂ nanostructures self-assembled by nanorods have been successfully fabricated by a simple solvothermal route without using template materials or structure-directing additives. The products were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), Raman spectrometer system (Raman), UV–vis absorption spectroscopy (UV–vis) and N₂ adsorption–desorption measurement. The results indicate that synthesized chrysanthemum-like hierarchical anatase TiO₂ nanostructures have a spherical shape with an average diameter of 1.5 μm and they are composed of nanorods with a width of about 30 nm and a length of about 300 nm. The pore distribution of the sample exhibits two kinds of pores. Such mesoporous structure of the sample might be extremely useful in photocatalysis because they possess efficient transport pathways to the interior and supplies higher specific area for more pollutant molecules to be absorbed. In addition, the synthesized TiO₂ nanostructures show enhanced photocatalytic activity compared with commercial P25 for the degradation of RhB under UV light irradiation, which can be attributed to their special hierarchical structure and high light-harvesting capacity.     

Thermodynamic parameters of activation for photodegradation of phenolics

The photocatalytic degradation of three phenolics namely phenol, 4-chlorophenol and 4-nitrophenol were carried out in aerated aqueous suspension of TiO₂ irradiated by ultraviolet light. The influence of temperature at optimized pH and TiO₂ concentration was studied. The degradation kinetics were somewhat accelerated by increase in temperature in the range 25–45 °C and apparent activation energy was calculated to be 9.68–21.44 kJ mol^?1. Thermodynamic parameters of activation were also assessed for the degradation process. Formation of acidic species results in decrease in pH of solution. The appearance and the evolution of main intermediate species like hydroquinone, benzoquinone and catechol during the degradation process were computed by UV–vis spectral analysis.     

Decomposition of nonionic surfactant on a nitrogen-doped photocatalyst under visible-light irradiation

A visible-light-active N-containing TiO₂ photocatalysts were prepared from crude amorphous titanium dioxide by heating amorphous TiO₂ in gaseous NH₃ atmosphere. The calcination temperatures ranged from 200 to 1000 °C, respectively. UV–vis/DR spectra indicated that the N-doped catalysts prepared at temperatures <400 °C absorbed only UV light (E_g = 3.3 eV), whereas samples prepared at temperatures ≥400 °C absorbed both, UV (E_g = 3.10–3.31 eV) and vis (E_g = 2.54–2.66 eV) light. The chemical structure of the modified photocatalysts was investigated using FT-IR/DRS spectroscopy. All the spectra exhibited bands indicating nitrogen presence in the catalysts structure. The photocatalytic activity of the investigated catalysts was determined on a basis of a decomposition rate of nonionic surfactant (polyoxyethylenenonylphenol ether, Rokafenol N9). The most photoactive catalysts were those calcinated at 300, 500 and 600 °C. For the catalysts heated at temperatures of 500 and 600 °C Rokafenol N9 removal was equal to 61 and 60%, whereas TOC removal amounted to 40 and 35%, respectively. In case of the catalyst calcinated at 300 °C surfactant was degraded by 54% and TOC was removed by 35%. The phase composition of the most active photocatalysts was as follows: (a) catalyst calcinated at 300 °C—49.1% of amorphous TiO₂, 47.4% of anatase and 3.5% of rutile; (b) catalyst calcinated at 500 °C—7.1% of amorphous TiO₂, 89.4% of anatase and 3.5% of rutile; (c) catalyst calcinated at 600 °C—94.2% of anatase and 5.8% of rutile.     

Hydrothermal preparation of Ag-TiO2 nanostructures with exposed {001}/{101} facets for enhancing visible light photocatalytic activity

Nano-composite materials of Ag nanoparticles dispersed TiO₂ nanocubes with exposed {001}/{101} crystal faces were fabricated mainly via a flexible one-step method of hydrothermal treatment with different content of Ag from 1 up to 3 mol%. Prepared photocatalysts were characterized by X-ray diffraction, scanning electron microscope, transmission electron microscopy, UV–vis absorption spectroscopy, X-ray photoelectron spectroscopy and Raman spectroscopy. These analysis was carried out for understanding the contribution of different content of silver for enhancing the photocatalytic activity of TiO₂ nanocubes. Prepared silver nanoparticles had small particle size and grafted to the {101} crystal face of TiO₂ with the role of template control agent and linking agent. The photocatalytic performance of Ag-TiO₂ nanocubes were researched via Rhodamine B dye removal under visible light irradiation ( ≧420 nm). Ag-TiO₂ composite materials with the content of 2 mol% Ag showed the best photocatalytic activity for degradation of Rhodamine B, which was five times more than bare TiO₂ and associated with the localized surface plasmon resonance (LSPR) propelled effect. The mechanism by which silver enhanced the photocatalytic activity of TiO₂ was also demonstrated.     

Photocatalytic degradation of gaseous toluene in an ultrasonic mist containing TiO2 particles

Photocatalytic degradation of toluene gas in a mist formed by ultrasonic atomization of slurried TiO₂ was studied under various conditions. Upon irradiation at 365 nm, toluene was decomposed and mineralized by photocatalytic reaction on the mist surface or inside it. The toluene removal ratio increased as the amount of TiO₂ in the slurry was increased. Under UV_254+185 irradiation, the mineralization ratio was higher than at 365 nm. We propose that under UV_254+185 irradiation, toluene was immediately converted to water-soluble intermediates by direct photolysis and O₃ oxidation in the gas phase and that these intermediates were captured in the mist and photocatalytically mineralized to CO and CO₂. This paper indicates a new effective utilization of ultrasonic mist and TiO₂ photocatalyst.     

Comparison on photocatalytic degradation of gaseous formaldehyde by TiO2, ZnO and their composite

In order to compare the photocatalytic properties of TiO₂, ZnO and their composite in the gas phase pollutant environment, nanocomposite with different mole ratios of TiO₂/ZnO were designed to degrade gaseous formaldehyde. The results showed that the rate constant of TiO₂ for formaldehyde degradation was 0.05 min^?1 which was two orders of magnitude larger than that of ZnO in our experiment. Through comprehensive analysis of UV–vis diffuse reflectance (UV–vis) spectra, photoluminescence spectra (PL) and energy band diagram, it was found that the differences of photocatalytic properties between ZnO and TiO₂ may mainly originate from the increased recombination of photoinduced charges in ZnO. The photocatalytic properties of TiO₂/ZnO composite for formaldehyde degradation were much worse than those of TiO₂, while better than those of ZnO. The addition of a small amount of ZnO weakened the photocatalytic properties of TiO₂. It may be attributed to that the recombination action of photoinduced electron–hole pairs in ZnO.     

Hydrothermal synthesis of titanate nanostructures with high UV absorption characteristics

The titanate nanostructures with high UV absorption characteristics could be fabricated by hydrothermal method within a temperature range of 90–150 °C. TEM, XRD, BET analyses, and UV–vis spectroscopy were employed to elucidate the synthesized titanate nanostructure characteristics which were microstructure, phase transformation, specific surface area, and band gap energy, respectively. With an increase in the hydrothermal treating temperature from 90 to 120 °C, the specific surface area of titanate nanostructures was increased from 83 to 258 m²/g, while the band gap energy of titanate nanostructures was increased from 3.44 to 3.84 eV and then slightly decreased to 3.81 eV at 150 °C. The fabricated titanate nanostructures could exhibit higher UV adsorption capability but lower photocatalytic activity when compared with that of commercial TiO₂ powders.     

SnS2/TiO2 nanocomposites with enhanced visible light-driven photoreduction of aqueous Cr(VI)

SnS₂/TiO₂ nanocomposites have been synthesized via microwave assisted hydrothermal treatment of tetrabutyl titanate in the presence of SnS₂ nanoplates in the solvent of ethanol at 160 °C for 1 h. The physical and chemical properties of SnS₂/TiO₂ were studied by XRD, FESEM, EDS, TEM, XPS and UV–vis diffuse reflectance spectra (DRS). The photocatalytic activity of SnS₂/TiO₂ nanocomposites were evaluated by photoreduction of aqueous Cr(VI) under visible light (λ>420 nm) irradiation. The experimental results showed that the SnS₂/TiO₂ nanocomposites exhibited excellent reduction efficiency of Cr(VI) (~87%) than that of pure TiO₂ and SnS₂. The SnS₂/TiO₂ nanocomposites were expected to be a promising candidate as effective photocatalysts in the treatment of Cr(VI) wastewater.     

Sol–gel preparation of titania multilayer membrane for photocatalytic applications

The main goal of the present study is to prepare a titania membrane with high permeability and photocatalytic activity for environmental applications. In this investigation a mesoporous titania multilayer membrane on alumina substrate is successfully fabricated via the sol–gel processing method. The prepared titania polymeric sol for the membrane top layer has an average particle size of 11.7 nm with a narrow distribution. The resulting TiO₂ multilayer membrane exhibits homogeneity with no cracks or pinholes, small pore size (4 nm), large specific surface area (83 m²/g), and small crystallite size (10.3 nm).The permeability and photocatalytic properties of the titania membrane were measured. The photoactivity of the titania membrane was examined to be 41.9% after 9 h UV irradiation based on methyl orange degradation. This measurement indicates high photocatalytic activity per unit mass of the catalyst. Through multilayer coating procedure, the photocatalytic activity of the membrane improved by 60% without sacrificing the membrane permeation. The prepared TiO₂ photocatalytic membrane has a great potential in developing high efficient water treatment and reuse systems due to its multifunctional capability such as decomposition of organic pollutants and physical separation of contaminants.     

Preparation and photocatalytic activity of silver and TiO2 nanoparticles/montmorillonite composites

Ag–TiO₂/montmorillonite (Ag–TiO₂/MMT) was synthesized as photocatalyst using TiCl₄ hydrolysis to introduce nanosized TiO₂ into the interlayer space of the montmorillonite (MMT). Stable pillared TiO₂/MMT was obtained by calcination at 500 °C, then silver was loaded by reduction of silver nitrate. The physico–chemical properties of the photocatalyst were determined by X-ray diffraction (XRD), infrared spectroscopy (IR), atomic absorption spectrophotometer (AAS), nitrogen gas adsorption (BET method) and UV–Visible spectra. The photooxidation activity for methylene blue (M.B.) degradation was as follows: Ag–TiO₂/MMT > TiO₂/MMT > TiO₂(P25). Among them Ag–TiO₂/MMT had the highest photooxidation activity because of its larger specific surface caused by pillaring and loading of silver for improving its light absorption.     

Facile assembly of TiO2 nanospheres/SnO2 quantum dots composites with excellent photocatalyst activity for the degradation of methyl orange

In this report, SnO₂ quantum dots anchored on TiO₂ nanospheres (TiO₂/SnO₂ composites) have been synthesized by a simple one-step hydrothermal process, and then employed as photocatalyst in photodegradation system. The microstructure of TiO₂/SnO₂ composites reveals that the SnO₂ quantum dots are dispersed on the surface of TiO₂ nanospheres uniformly. The photocatalytic behavior of the as-prepared samples revealed that the composites exhibited highly efficient performance by degrading 100 mL of 10 mg/L methylene orange in 15 min completely under ultraviolet-visible light. Owning to the special structure of the composites, TiO₂/SnO₂ shows a more UV–vis light absorption than either pure TiO₂ nanospheres or pure SnO₂ quantum dots. This study offers a facile method to prepare TiO₂/SnO₂ composites, which will be a choice for greatly extending potential applications in water pollution treatment, degradation of pollutants and other related fields.     

The photo-catalytic activities of neodymium and fluorine doped TiO2 nanoparticles

A series of photo-catalysts were synthesized by neodymium and fluorine doped TiO₂, and their characteristics evaluated by X-ray diffraction (XRD), UV–vis diffuse reflectance spectra (UV–vis), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS). Neodymium and fluorine doped TiO₂ has obvious absorption in the visible light and the absorption edge shifts toward red wavelength. In addition, compared with pure TiO₂, the doped catalyst has intense absorption at 528, 587, 750, 808, and 881 nm. The catalytic efficiency was tested by monitoring the photo-catalytic degradation of methylene blue (MB) in visible light and ultraviolet light. The results showed that the optimum doping content was Nd:F:TiO₂ = 0.5:5:100 (molar ratio) heat treated at 500 °C, and the reaction rates of MB degradation were estimated to be about 1.76 times and 1.45 times higher than undoped TiO₂ in ultraviolet light and visible light.     

Template-assisted hydrothermal synthesis and photocatalytic activity of novel TiO2 hollow nanostructures

TiO₂ hollow nanostructures were successfully synthesized by a controlled hydrothermal precipitation reaction using Resorcinol–Formaldehyde resin spheres as templates in aqueous solution, and then removal of the RF resins spheres by calcination in air at 450 °C for 4 h. The obtained TiO₂ hollow spheres were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, N₂ adsorption–desorption analysis, and UV–visible diffuse reflectance spectroscopy. The photocatalytic activity of the as-prepared samples was evaluated by photocatalytic decolorization of rhodamine B aqueous solution at ambient temperature under UV illumination. The results indicated TiO₂ hollow nanostructures exhibit the excellent photocatalytic activity probably due to the unique hollow micro-architectures.     

A novel TiO2 − xNx/BN composite photocatalyst: Synthesis,characterization and enhanced photocatalytic activity for Rhodamine B degradation under visible light

A novel TiO_2 − xN_x/BN composite photocatalyst was prepared via a facile method using melamine–boron acid adducts (M·2B) and tetrabutyl titanate as reactants. The morphological results confirmed that nitrogen-doped TiO₂ nanoparticles were uniformly coated on the surface of porous BN fibers. A red shift of absorption edge from 400 nm (pure TiO₂) to 520 nm (TiO_2 − xN_x/BN composites) was observed in their UV–Vis light absorption spectra. The TiO_2 − xN_x/BN photocatalysts exhibited enhanced photocatalytic activity for the degradation of Rhodamine B (RhB) and the highest photocatalytic degradation efficiency reached 97.8% under visible light irradiation for 40 min. The mechanism of enhanced photocatalytic activity was finally proposed.     

Synthesis and characterization of TiO2 nanoparticles

TiO₂ nanoparticles were synthesized by thermal decomposition of a precipitate obtained from a precursor solution of titanium isopropoxide (IV) and isopropyl alcohol. The as-prepared precipitate was heated at various temperatures and the obtained samples were morphologically, texturally and structurally characterized using TGA–DTA, gas adsorption, SEM, XRD and FTIR. The UV–vis radiation absorption and the photocatalytic activity also were verified. The TiO₂ sample heated at 300 °C shows the best results to be applied as blocker in solar skin protector.     

One-step preparation of size-defined aggregates of TiO2 nanocrystals with tuning of their phase and composition

One-step route based on the thermal decomposition of the double salt (NH₄)₂TiO(SO₄)₂ (ammonium titanyl sulfate, ATS) is presented to prepare size-defined aggregates of Ti-based nanoparticles with structural hierarchy. The component of Ti-based networks is tunable from anatase/rutile TiO₂, nitrogen-doped TiO₂, TiN_xO_1−x, to TiN depending on the atmospheres and reaction temperatures. The as-prepared Ti-based powders were characterized by X-ray diffraction analysis (XRD), transmission electron microscopy (TEM), UV–vis diffuse reflectance spectra (DRS), and BET surface area techniques. It is found that TiO₂ in the predominant rutile phase could be achieved by the thermal decomposition of ATS in flowing Ar gas. Furthermore, the nitrogen-doped TiO₂, TiN_xO_1−x solid solution and TiN were prepared by the thermal decomposition of ATS in flowing NH₃ gas by varying the temperatures. The network of anatase TiO₂ with a specific surface area up to 64 m² g⁻¹ contains large mesopores with a mean diameter of ca. 15 nm, and the large pore size allows more accessible surface and interface available for the photocatalytic degradation of large-molecule dyes. The photocatalytic activity of the prepared TiO₂ and nitrogen-doped TiO₂ under UV–vis light irradiation is compared to Degussa P-25 using the photocatalytic degradation of methylene blue (MB) as a model reaction. The anatase TiO₂ nanoparticles derived from one-step route show the highly efficient photocatalytic activity for the degradation of MB in comparison with Degussa P-25. The presence of large-sized rutile in the TiO₂ powder decreases the specific surface area and thus the powder exhibits a lower photocatalytic activity.     

TiO2 nanofibers doped with rare earth elements and their photocatalytic activity

In the present study rare earth doped (Ln³⁺–TiO₂, Ln = La, Ce and Nd) TiO₂ nanofibers were prepared by the sol–gel electrospinning method and characterized by XRD, SEM, EDX, TEM, and UV-DRS. The photocatalytic activity of the samples was evaluated by Rhodamine 6G (R6G) dye degradation under UV light irradiation. XRD analysis showed that all the synthesized pure and doped titania nanofibers contain pure anatase phase at 500 °C but at 700 °C it shows both anatase and rutile phase. XRD result also shows that Ln³⁺-doped titania probably inhibits the phase transformation. The diameter of nanofibers for all samples ranges from 200 to 700 nm. It was also observed that the presence of rare-earth oxides in the host TiO₂ could decrease the band gap and accelerate the separation of photogenerated electron–hole pairs, which eventually led to higher photocatalytic activity. To sum up, our study demonstrates that Ln³⁺-doped TiO₂ samples exhibit higher photocatalytic activity than pure TiO₂ whereas Nd³⁺-doped TiO₂ catalyst showed the highest photocatalytic activity among the rare earth doped samples.