首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到19条相似文献,搜索用时 93 毫秒
1.
硅溶胶的制备与应用   总被引:6,自引:0,他引:6  
文章介绍了硅溶胶的主要性质和应用领域,以及国内外硅溶胶领域的发展现状,并阐述了硅溶胶制备的基本方法及其优缺点.离子交换法、单质硅水解法是目前工业化最成熟的工艺.开发新的硅溶胶制备工艺,制造高浓度、高纯度、高稳定性、特殊用途硅溶胶产品是硅溶胶制备研究的发展趋势.  相似文献   

2.
硅溶胶是二氧化硅的微粒分散于水中的胶体溶液.本文讨论了硅溶胶的制备方法,介绍了硅溶胶在化工、精密铸造、纺织、造纸、材料、涂料和电子等工业领域的用途,并对硅溶胶的研究前景进行了展望.  相似文献   

3.
正硅酸乙酯水解-聚合的工艺参数研究及纳米SiO2的合成   总被引:7,自引:0,他引:7  
以正硅酸乙酯为原料,分别以盐酸、硫酸、甲酸、天冬氨酸或其混合酸为水解催化剂制备硅溶胶.研究了不同催化剂、电解质以及醇对水解和胶凝过程的影响,结果发现,以盐酸或以盐酸和天冬氨酸的混合酸为催化剂可以得到较好的硅溶胶,而单独以有机酸和天冬氨酸为催化剂得不到理想的硅溶胶.同时还发现,醇的加入可以起到稳定硅溶胶的作用,而浓度较高的Na2SO4加剧了硅溶胶的聚结.另外,用X -射线衍射和紫外-可见光反射对纳米SiO2进行了分析.  相似文献   

4.
常压浓缩法生产硅溶胶的研究   总被引:1,自引:0,他引:1  
近年来,涂料、粘接剂、耐火绝热材料、陶瓷、纺织等工业对硅溶胶的需求日益增大,特别是近来无机高分子建筑涂料的兴起,更为硅溶胶的大量应用开辟了广阔的市场。与此同时,对目前硅溶胶产品也提出了高浓度,高稳定性,低价格的要求。制备低浓度硅溶胶的方法很多,归纳起来,大致有三种:1.电渗析硅酸钠法。2.水解有机硅法。3.离子交换硅酸钠法。最常用的是离子交换法。无论使用那种方法生产高浓度硅溶胶,都必须进行浓缩。硅溶胶是不稳定体系,控制何种条件进行浓缩,往往成  相似文献   

5.
硅溶胶对丙烯酸酯乳液改性的影响   总被引:1,自引:0,他引:1  
由正硅酸乙酯(TEOS)催化水解制得硅溶胶,通过半连续种子乳液聚合法制备了SiO2/丙烯酸酯复合乳液,采用FT-IR、SEM、TEM、TG对共聚物结构及乳胶膜形态进行表征,探讨了适合于乳液聚合的硅溶胶制备工艺条件及不同原料配比下硅溶胶对聚合反应稳定性及乳液性能的影响.结果表明:原料最佳配比下所制得硅溶胶为浅乳白色带蓝光,乳液聚合稳定性最好.且乳液各项性能最佳,涂膜吸水率仅为14.43%.  相似文献   

6.
UV固化环氧丙烯酸酯/SiO2杂化涂料的制备与性能研究   总被引:3,自引:1,他引:2  
以改性硅溶胶为无机组分,双酚A型环氧丙烯酸酯为有机组分,制备了UV同化环氧丙烯酸酯/SiO2杂化涂料.研究了改性硅溶胶制备条件及其用量对杂化涂料机械性能的影响,并用FT-IR和TG对固化膜进行了表征.结果表明改性硅溶胶能够同时提高体系的硬度和柔韧性,当n(MPTMS):n(HCI):n(TEOS)为0.75:0.024:1、改性硅溶胶与环氧丙烯酸酯的质量比为30:70时,涂膜机械性能最佳.TG分析结果表明改性硅溶胶的加入可以明显提高环氧丙烯酸酯的热稳定性.  相似文献   

7.
本文对比了加入助剂制备的大粒径硅溶胶与普通硅溶胶的凝胶过程,重点考察了pH、胶粒粒径、温度、硅溶胶浓度、添加表面活性剂等对大粒径硅溶胶稳定性的影响,并采用TEM技术表征了大粒径硅溶胶的粒径增长方式。结果表明:加入助剂能提高大粒径硅溶胶的稳定性,而且硅溶胶的稳定性受硅溶胶粒径增长方式的影响。  相似文献   

8.
研究了硅溶胶凝胶的影响因素,选择匹配的高分子聚合物,对硅溶胶胶粒进行绑缚作用,协助硅溶胶成膜降低其刚性,考察其他助剂的协同作用,发挥出硅溶胶成膜后的特性,配制的水性木器涂料透明底漆具有硬度高、干速快、硬度建立快、初期抗压性好、耐水性优、附着力好、打磨性好等优势.  相似文献   

9.
研究了不同浓度硅溶胶的黏度性质.在硅溶胶中添加不同种类的表面活性剂,利用黏度法研究了表面活性剂对硅溶胶黏度性质的影响,发现加入3种不同表面活性剂后,硅溶胶的黏度都出现了不同程度的下降,其中以添加十二烷基苯磺酸钠(SDBS)的降黏作用最明显,添加乳化剂OP-10和十二烷基硫酸钠(SDS)的次之.表面活性剂的降黏作用机理推测为SDBS在硅溶胶颗粒上的包覆作用.SDBS的降黏作用与其浓度有关,表现为临界胶束浓度规律,临界浓度约为4.6×10-3mol/L.  相似文献   

10.
硅溶胶的制备及其应用   总被引:2,自引:0,他引:2  
硅溶胶是一种常见的工业原料,它在许多工业领域有着广泛的应用.本文综述了硅溶胶的制备方法及其应用领域.  相似文献   

11.
The silica sol/fluoroacrylate core?Cshell nanocomposite emulsion was successfully synthesized via traditional emulsion polymerization through grafting of KH-570 onto silica particles. Comparing the performance of the polyacrylate copolymer, the fluorinated polyacrylate copolymer and the silica sol/fluoroacrylate core?Cshell nanocomposite emulsion, we can come to a conclusion that the silica sol/fluoroacrylate core?Cshell nanocomposite emulsion presents significantly excellent performance in all aspects. The products were characterized by Fourier transform infrared (FTIR), photon correlation spectroscopy (PCS), transmission electron microscopy (TEM), thermogravimetry (TGA), Contact angle and UV?Cvis analyses techniques. The chemical structure of polyacrylate copolymer, fluorinated polyacrylate copolymer and silica sol/fluoroacrylate nanocomposite were detected by FTIR. The size and stability of emulsion latex particles were determined by PCS technique. TEM analysis confirmed that the resultant latex particle has the core?Cshell structure, obviously. The water absorption and contact angle data also showed that the silica sol/fluoroacrylate nanocomposite film has good hydrophobic performance. TGA analysis indicated the weight loss of the silica sol/fluoroacrylate nanocomposite film begins at around 350?°C which testifies its good thermal stability. The UV?Cvis spectroscopy analysis showed that the silica sol/fluoroacrylate nanocomposite film possess UV?Cvis shielding effect when the added volume amount of KH570 modified silica sol is up to 5?mL. Therefore, the excellent properties of hydrophobicity, thermodynamics and resistance to ultraviolet provide the silica sol/fluoroacrylate nanocomposite film with potential applications in variety fields. In addition, the formation mechanism of core?Cshell structure silica sol/fluoroacrylate nanocomposite latex particles was speculated.  相似文献   

12.
朱慧仙  王力 《广东化工》2008,35(2):19-22
酸性硅溶胶是二氧化硅微粒在水中均匀扩散形成的胶体溶液,pH为2~4,具有许多优良性质和特点,作为一种精细化工产品,被广泛应用于化工、材料、纺织、造纸、电子等工业。文章介绍了酸性硅溶胶的制备工艺、结构及特性,分析了pH、电解质盐浓度和二氧化硅粒径对其稳定性的影响,并对酸性硅溶胶的研究前景进行了展望。  相似文献   

13.
以酸性硅溶胶及其结合料浆为研究对象,通过对比胶凝时间、黏度、触变环面积、剪切应力等流变参数,研究了聚丙烯酰胺、氢氧化镁、柠檬酸三铵等对酸性硅溶胶及结合料浆流变行为、凝聚过程的作用规律。结果表明:氢氧化镁电离出Mg2+促进了酸性硅溶胶的缩合反应,对酸性硅溶胶胶凝过程的影响较为显著;氢氧化镁添加量的增加,增大了胶凝速度,酸性硅溶胶的稳定性下降。聚丙烯酰胺作为阴离子表面活性剂,通过空间位阻效应,缔合溶胶中的氢键,在溶胶中形成三维网络结构,同时聚丙烯酰胺水解吸附在溶胶胶团颗粒表面,加快了SiO2粒子的絮凝,提高了酸性硅溶胶及其结合料浆的黏度。控制柠檬酸三铵的含量低于10 mg/mL,有助于降低硅溶胶结合料浆的黏度,提高体系的稳定性。  相似文献   

14.
硅溶胶问世已有超过100 a的历史,其在分子筛的合成及催化剂的制备中具有广泛的应用。简要综述了硅溶胶的市场情况、制备方法和性质。重点介绍了硅溶胶在分子筛类催化剂制备中的应用,包括硅溶胶在硅源、黏结剂以及制备小晶粒分子筛等方面的应用。结合国内外的研究进展,详细论述了催化剂用硅溶胶作为硅源、黏结剂和载体在分子筛的合成和催化剂制备中所起到的作用和优势。结合硅溶胶的应用研究现状,提出硅溶胶在制备分子筛类催化剂过程中存在的一些问题:以硅溶胶为黏结剂制备的硅基催化剂耐磨性差;以硅溶胶为载体制备的催化剂活性组分分散性差;硅溶胶产品的批次质量稳定性差。指出,如何解决以上问题,以更有效地提高硅溶胶在分子筛类催化剂制备中的应用,将是以后研究的重点。最后,对硅溶胶的发展前景进行了展望,指出在硅溶胶可控合成的基础上,分子筛及其催化剂的可控合成和应用开发将会有更广阔的前景。  相似文献   

15.
溶剂型有机硅改性硅溶胶的合成与性能研究   总被引:1,自引:0,他引:1  
以碱性硅溶胶、甲基三甲氧基硅烷和二苯基二甲氧基硅烷为主要原料,二乙二醇丁醚为溶剂,通过水解-缩聚反应,制得溶剂型有机硅改性硅溶胶。研究了硅溶胶的pH值、中和用酸的种类、R/Si值以及有机硅单体总质量对有机硅改性硅溶胶性能的影响。结果表明,最佳工艺为:用HNO3调节硅溶胶的pH值至4.3~4.5之间、R/Si值为1.25~1.30、有机硅单体的总质量110~120 g(硅溶胶的质量为100 g),在此条件下得到的有机硅改性硅溶胶外观为胶体,成膜性好,其膜的硬度大于6 H、附着力为1级。红外光谱分析表明,有机硅很好地包裹在二氧化硅表面;TG-DSC结果表明,有机硅改性硅溶胶的耐热温度达500℃。  相似文献   

16.
在25.0℃及搅拌条件下,采用等温热导微量热法研究了硅溶胶与硅酸钾的混合过程。结果表明,硅溶胶与硅酸钾混合,立刻发生了SiO2溶解和复杂的化学反应,并产生了完全不同于硅溶胶和硅酸钾的SiO2胶体粒子和化学成分以及热效应,热效应受硅溶胶所占的相对重量百分比的影响。其反应的特征是硅溶胶和硅酸钾的反应级数从低到高时刻都在快速不断交替变化;随着硅溶胶所占比例的提高,热谱曲线峰高、硅溶胶与硅酸钾的混合化学反应完全的曲线总面积(总焓变QT)和热力学焓变(ΔH)数值都表现出不断增大的趋势。  相似文献   

17.
Polyacrylate/silica nanocomposite latexes were prepared by silica sol and facilely modified with a silane coupling agent γ-methacryloxypropyltrimethoxysilane (KH-570) aimed at reinforcing the interaction between silica nanoparticles and latex particles in a convenient way. The effects of silica sol and KH-570 amounts on the performance of latexes and films are discussed. Particle size and morphology tests demonstrated that the silica nanoparticles could form hydrogen bond interactions between latex particles, and thus influence the rheological properties of latexes. Tensile measurements and SEM photographs showed the reinforcing and toughening roles of silica nanoparticles. SEM images also indicated that the addition of silica sol increased the roughness of films, which resulted in the increase of hydrophilic silanol groups on the film surface and the decrease of water resistance of latex films. The latex films retained good adhesion force, flexibility, and impact resistance even when the silica sol content was as much as 25%. TGA data revealed that the incorporation of silica sol enhanced the thermal stability of the films. After introducing KH-570, the particle size increased with the increase of the amount of KH-570. Moreover, the addition of KH-570 improved the water resistance and maintained other properties of the latex films appropriately.  相似文献   

18.
The fouling potential of the negatively charged silica sol in electrodialysis (ED) by adsorption on the surface of an anion exchange membrane was investigated. Since the fouling potential is related to the physical and electrochemical properties of the silica sol and anion exchange membranes, it is important to characterize the properties of silica sol and membranes. The surface charge of silica sol was investigated by the electrophoretic mobility and its isoelectric point was determined as pH 3. The commercial anion exchange membranes were characterized in terms of exchange capacity, water content, the zeta potential and the electrochemical properties of the membranes using impedance spectroscopy to predict the effects on the electrodialysis performances. Among the characterized properties, exchange capacity and some electrochemical properties of the anion exchange membranes were rather improved after ED experiments. In the electrodialysis of solution containing silica sol, deposition of the silica sol did not decrease the desalting performance of the anion exchange membranes because of loosely packed cake layer on the membrane surface.  相似文献   

19.
通过丙烯酸乳液与硅溶胶复配,添加适当的助剂,经分散制得有机一无机复合木器涂料,该涂料兼具有机涂料和无机涂料的特性。探讨了硅溶胶的选择和pH值对体系的影响以及两者复配的最佳比例,同时还介绍了助剂的作用及其影响。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号