Dual‐stimuli‐responsive polymer‐coated mesoporous silica nanoparticles used for controlled drug delivery

In this article, a temperature‐ and pH‐responsive delivery system based on block‐copolymer‐capped mesoporous silica nanoparticles (MSNs) is presented. A poly[2‐(diethylamino)ethyl methacrylate)] (PDEAEMA)‐b‐poly(N‐isopropyl acrylamide) (PNIPAM) shell on MSNs was obtained through the surface‐initiated atom transfer radical polymerization. The block copolymer PDEAEMA‐b‐PNIPAM showed both temperature‐ and pH‐responsive properties. The release of the loaded model molecules from PDEAEMA‐b‐PNIPAM‐coated MSNs could be controlled by changes in the temperature or pH value of the medium. The as‐desired drug‐delivery carrier may be applied to biological systems in the future. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42395.     

Electrospun poly(vinyl alcohol) composite nanofibers with halloysite nanotubes for the sustained release of sodium d‐pantothenate

Poly(vinyl alcohol) (PVA) nanofibers containing halloysite nanotubes (HNTs) loaded with sodium d ‐pantothenate (SDP) were successfully fabricated via simple blend‐electrospinning. SDP was efficiently loaded into the innate HNT lumen with an SDP/HNT mass ratio of 1.5:1 via vacuum treatment. The SDP‐loaded HNT‐inclusion complex was evaluated with drug‐loading efficiency testing, Fourier transform infrared (FTIR) spectroscopy, and X‐ray diffraction. The morphologies of the nanofibers were observed by scanning electron microscopy, which revealed uniform and smooth surfaces of the nanofibers. The addition of HNTs to the composite nanofibers increased the viscosity of the polymer solution, and this suggested shorter fiber diameters. FTIR spectroscopy verified the good compatibility of the SDP and HNTs with PVA. Moreover, the swelling properties were found to quantitatively correlate with weight loss. In vitro drug‐release testing revealed that the HNTs and crosslinking reaction most dramatically affected the sustained release of SDP from the PVA and SDP‐loaded HNT complex. In the drug‐release kinetics model, SDP release depended on the diffusion caused by the deformation of the polymer‐based structures in the medium; it followed Fickian diffusion with acceptable coefficient of determination (r²) values between 0.88 and 0.94. Most importantly, the HNTs as natural biocontainers effectively modulated the release profile by loading the active compound in harmony with the electrospun nanofibers. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42900.     

Preparation and release characteristics of dexamethasone acetate loaded organochlorine‐free poly(lactide‐co‐glycolide) nanoparticles

Dexamethasone‐loaded poly(lactide‐co‐glycolide) (PLGA) devices are commonly used as model systems for controlled release. In this study, PLGA nanoparticles containing dexamethasone acetate were prepared by a nanoprecipitation technique in the absence of organochlorine solvents and were characterized by their mean size, ζ potential, scanning electron microscopy, and differential scanning calorimetry to develop a controlled release system. The analytical method for the quantification of dexamethasone acetate by high‐performance liquid chromatography was validated. The results show that it was possible to prepare particles at a nanometric size because the average diameter of the drug‐loaded PLGA particles was 540 ± 4 nm with a polydispersity index of 0.07 ± 0.01 and a ζ potential of ?2.5 ± 0.3 mV. These values remained stable for at least 7 months. The drug encapsulation efficiency was 48%. In vitro tests showed that about 25% of the drug was released in 48 h. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41199.     

Fabrication of galactosylated chitosan–5‐fluorouracil acetic acid based nanoparticles for controlled drug delivery

In this study, a novel type of macromolecular prodrug, N‐galactosylated chitosan (GC)?5‐fluorouracil acetic acid (FUA) conjugate based nanoparticles, was designed and synthesized as a carrier for hepatocellular carcinoma drug delivery. The GC–FUA nanoparticles were produced by an ionic crosslinking method based on the modified ionic gelation of tripolyphosphate with GC–FUA. The structure of the as‐prepared GC–FUA was characterized by Fourier transform infrared and ¹H‐NMR analyses. The average particle size of the GC–FUA nanoparticles was 160.1 nm, and their drug‐loading content was 21.22 ± 2.7% (n = 3). In comparison with that of the freshly prepared nanoparticles, this value became larger after 7 days because of the aggregation of the GC–FUA nanoparticles. An in vitro drug‐release study showed that the GC–FUA nanoparticles displayed a sustained‐release profile compared to 5‐fluorouracil‐loaded GC nanoparticles. All of the results suggest that the GC–FUA nanoparticles may have great potential for anti‐liver‐cancer applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42625.     

Preparation and characterization of venlafaxine hydrochloride‐loaded chitosan nanoparticles and in vitro release of drug

The venlafaxine hydrochloride (VHL)‐loaded chitosan nanoparticles were prepared by ionic gelation of chitosan (CS) using tripolyphosphate (TPP). The nanoparticles were characterized using FTIR, differential scanning calorimetry, X‐ray diffraction, dynamic light scattering, transmission electron microscopy, and X‐ray photoelectron spectroscopy. The effect of concentration of CS, polyethylene glycol (PEG), VHL and CS/TPP mass ratio on the particle size and zeta potential of nanoparticles was examined. The particle size of CS/TPP nanoparticles and VHL‐loaded CS/TPP nanoparticles was within the range of 200–400 nm with positive surface charge. In the case of VHL‐loaded nanoparticles and PEG‐coated CS/TPP nanoparticles, the particle size increases and surface charge decreases with increasing concentration of VHL and PEG. Both placebo and VHL‐loaded CS/TPP nanoparticles were observed to be spherical in nature. PEG coating on the surface of CS/TPP nanoparticles was confirmed by XPS analysis. Maximum drug entrapment efficiency (70%) was observed at 0.6 mg/mL drug concentration. In vitro drug release study at 37°C ± 0.5°C and pH 7.4 exhibited initial burst release followed by a steady release. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Electrically controllable perchlorate removal based on poly(aniline‐co‐o‐aminophenol) doped with p‐toluene sulfonate

Poly(aniline‐co‐o‐aminophenol) (PANOA) was synthesized via electrochemical copolymerization of o‐aminophenol and aniline using p‐toluene sulfonate (TSA^?) as the counterion. The redox transformation of PANOA is accompanied by the exchange of anions into and out of the copolymer, and the feasibility of perchlorate (ClO₄^?) removal via an electrically switched ion exchange process was evaluated in this study. The results of electrochemical quartz crystal microbalance (EQCM), electrochemical impedance spectroscopy (EIS), and Fourier transform infrared spectroscopy (FTIR) demonstrated the successful release of TSA^? upon reduction and uptake of ClO₄^? upon reoxidation of the copolymer. Also, in this work, the possible ion‐exchange mechanism of PANOA was proposed. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41895.     

Synthesis of chitosan‐graft‐β‐cyclodextrin for improving the loading and release of doxorubicin in the nanopaticles

Chitosan‐graft‐β‐cyclodextrin (CS‐g‐β‐CD) copolymer was synthesized by conjugating β‐cyclodextrins to chitosan molecules through click chemistry. The copolymer structure was characterized by Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR). CS‐g‐β‐CD/CMC nanoparticles were prepared by a polyelectrolyte complexation process in aqueous solution between CS‐g‐β‐CD copolymer and carboxymethyl chitosan (CMC), which was used to load anticancer drug (Doxorubicin hydrochloride, DOX·HCl) with hydrophobic group. The particle size, surface charge, zeta potential, and morphology of the nanoparticles were characterized with dynamic light scattering. The drug loading efficiency and in vitro release of DOX·HCl of the nanoparticles were measured by ultraviolet spectrophotometer. The results demonstrated that the size, surface charge and drug loading efficiency of the nanoparticles could be modulated by the fabrication conditions. The drug loading efficiency of CS‐g‐β‐CD/CMC nanoparticles was improved from 52.7% to 88.1% because of the presence of β‐CD moieties with hydrophobic cavities, which can form inclusion complexes with the drug molecules. The in vitro release results showed that the CS‐g‐β‐CD/CMC nanoparticles released DOX·HCl in a controlled manner, importantly overcoming the initial burst effect. These nanoparticles possess much potential to be developed as anticancer drug delivery systems, especially those drugs with hydrophobic group. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41034.     

Epoxidized poly(N‐isopropyl acrylamide)‐b‐epoHTPB‐b‐poly(N‐isopropyl acrylamide) triblock copolymer micelle nanoparticles for 10‐hydroxycamptothecin drug release

Thermoresponsive poly(N‐isopropyl acrylamide) (PNIPAM)‐block‐hydroxy‐terminated polybutadine‐block‐PNIPAM triblock copolymers were synthesized by atom transfer radical polymerization; this was followed by the in situ epoxidation reaction of peracetic acid. The copolymers were characterized by ¹H‐NMR, Fourier transform infrared spectroscopy, and size exclusion chromatography measurements, and their physicochemical properties in aqueous solution were investigated by surface tension measurement, fluorescent spectrometry, ultraviolet–visible transmittance, transmission electron microscopy observations, dynamic light scattering, and so on. The experimental results indicate that the epoxidized copolymer micelle aggregates retained a spherical core–shell micelle structure similar to the control sample. However, they possessed a decreased critical aggregate concentration (CAC), increased hydrodynamic diameters, and a high aggregation number and cloud point because of the incorporation of epoxy groups and so on. In particular, the epoxidized copolymer micelles assumed an improved loading capacity and entrapment efficiency of the drug, a preferable drug‐release profiles without an initial burst release, and a low cytotoxicity. Therefore, they were more suitable for the loading and delivery of the hydrophobic drug as a controlled release drug carrier. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41877.     

Thermosensitive self‐assembly micelles from A2BA2‐type poly(N‐isopropyl acrylamide)2‐b‐Poly(lactic acid)‐b‐Poly(N‐isopropyl acrylamide)2 four‐armed star block copolymers and their applications as drug carriers

A novel A₂BA₂‐type thermosensitive four‐armed star block copolymer, poly(N‐isopropyl acrylamide)₂‐b‐poly(lactic acid)‐b‐poly(N‐isopropyl acrylamide)₂, was synthesized by atom transfer radical polymerization and characterized by ¹H‐NMR, Fourier transform infrared spectroscopy, and size exclusion chromatography. The copolymers can self‐assemble into nanoscale spherical core–shell micelles. Dynamic light scattering, surface tension, and ultraviolet–visible determination revealed that the micelles had hydrodynamic diameters (D_h) below 200 nm, critical micelle concentrations from 50 to 55 mg/L, ζ potentials from ?7 to ?19 mV, and cloud points (CPs) of 34–36°C, depending on the [Monomer]/[Macroinitiator] ratios. The CPs and ζ potential absolute values were slightly decreased in simulated physiological media, whereas D_h increased somewhat. The hydrophobic camptothecin (CPT) was entrapped in polymer micelles to investigate the thermo‐induced drug release. The stability of the CPT‐loaded micelles was evaluated by changes in the CPT contents loaded in the micelles and micellar sizes. The MTT cell viability was used to validate the biocompatibility of the developed copolymer micelle aggregates. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 4137–4146, 2013     

Preparation of novel amphiphilic copolymer microspheres and their drug‐release and glucose‐sensitive properties

A novel amphiphilic copolymer was prepared by the copolymerization of N‐acryloyl‐3‐aminophenylboronic acid with β‐cyclodextrin containing maleic anhydride. The copolymer was fully characterized with ¹³C‐NMR, ¹H‐NMR, IR, and scanning electron microscopy. The self‐assembling mechanism of the copolymer in H₂O–CH₃OH cosolvents was studied. Gliclazide as a model drug was loaded inside the copolymer microspheres, and the drug‐release behavior of the microspheres was studied. The results of in vitro oscillating release tests indicated that the microspheres responded to glucose rapidly in 30 min, and the microspheres exhibited self‐regulated on–off release behavior four to six times in 6 h between the solution with 3 g/L glucose and the medium without glucose; this met the clinical requirements of multidrug delivery. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

In vitro nifedipine release from poly(lactic acid)/chitosan nanoparticles loaded with nifedipine

In this study, nanoparticles based on poly(lactic acid) (PLA), chitosan (CS), and nifedipine (NIF) were prepared by an emulsion method with poly(ethylene oxide) (PEO) as an emulsifier. We investigated the most suitable conditions for preparing the poly(lactic acid)/chitosan/nifedipine nanoparticles (PCNs) by changing the distilled water volume, PEO content, and PLA/CS ratio. NIFs with different contents were loaded into poly(lactic acid)/chitosan nanoparticles (PCs) to study in vitro drug‐delivery systems. The PCNs were characterized with a Zetasizer particle size analyzer, field emission scanning electron microscopy, Fourier transform infrared (FTIR) spectroscopy, and X‐ray diffraction (XRD) methods. From the obtained results of the particle size parameters of the PCNs, the most suitable conditions for the preparation of the PCNs were found. The FTIR spectroscopy and XRD results show that NIF was loaded into the PCs. The PCNs had major basic particle sizes in the range 20–40 nm. NIF release from the PCNs was studied as a function of the pH of the immersed solution, the immersion time, and the NIF content. The kinetics of drug release were investigated and are reported to determine the type of release mechanism. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43330.     

Preparation of new dendrimer‐like star‐shaped amphiphilic poly(ethylene glycol)–poly(ϵ‐caprolactone) copolymers for biocompatible and high‐efficiency curcumin delivery

Novel amphiphilic star‐shaped terpolymers comprised of hydrophobic poly(?‐caprolactone), pH‐sensitive polyaminoester block and hydrophilic poly(ethylene glycol) (M_n = 1100, 2000 g mol^?1) were synthesized using symmetric pentaerythritol as the core initiator for ring‐opening polymerization (ROP) reaction of ?‐caprolactone functionalized with amino ester dendrimer structure at all chain ends. Subsequently, a second ROP reaction was performed by means of four‐arm star‐shaped poly(?‐caprolactone) macromer with eight ‐OH end groups as the macro‐initiator followed by the attachment of a poly(ethylene glycol) block at the end of each chain via a macromolecular coupling reaction. The molecular structures were verified using Fourier transform infrared and ¹H NMR spectroscopies and gel permeation chromatography. The terpolymers easily formed core–shell structural nanoparticles as micelles in aqueous solution which enhanced drug solubility. The hydrodynamic diameter of these agglomerates was found to be 91–104 nm, as measured using dynamic light scattering. The hydrophobic anticancer drug curcumin was loaded effectively into the polymeric micelles. The drug‐loaded nanoparticles were characterized for drug loading content, encapsulation efficiency, drug–polymer interaction and in vitro drug release profiles. Drug release studies showed an initial burst followed by a sustained release of the entrapped drug over a period of 7days at pH = 7.4 and 5.5. The release behaviours from the obtained drug‐loaded nanoparticles indicated that the rate of drug release could be effectively controlled by pH value. Altogether, these results demonstrate that the designed nanoparticles have great potential as hydrophobic drug delivery carriers for cancer therapy. © 2015 Society of Chemical Industry     

Synthesis and characterization of a ferrocene‐modified,polyaniline‐like conducting polymer

A novel monomer called 1,1′‐ferrocenediacyl anilide (FcA) was synthesized from ferrocene (Fc). Copolymerization was carried out between FcA and aniline (ANI) by an electrochemical method. The novel monomer and copolymer were characterized with ¹H‐NMR, Fourier transform infrared (FTIR) spectroscopy, and ultraviolet–visible (UV–vis) spectroscopy. The hydrogen protons of the benzene ring were moved to a low field in ¹H‐NMR, and the absorption band of N?Q?N (where Q is the quinoid ring) appeared in the FTIR spectrum of the polymer. The peaks of both Fc and the π–π* electronic transition in the UV–vis spectra were redshifted. The results indicate that the copolymer mainly existed as a highly delocalized conjugated system. X‐ray diffraction analysis established further proof, and the process of electrochemical deposition was observed by scanning electron microscopy. The optimal synthesis conditions of the copolymer were determined through changes in the monomer molar ratios and the scan rate. The ideal performance of the copolymer was gained when the monomer molar ratio between FcA and ANI was 1:4 and the scan rate was 50 mV/s. Furthermore, the electrochemical performances were tested in detail by cyclic voltammetry, galvanostatic charge–discharge testing, and electrochemical impedance spectroscopy. The results show that the specific capacitance of poly(1,1′‐ferrocenediacyl anilide‐co‐aniline) increased up to 433.1 F/g at 0.5 A/g, the diffusion resistance was very small, and the durability was good enough. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43217.     

Preparation and characterization of poly{[α‐maleic anhydride‐ω‐methoxy‐poly(ethylene glycol)]‐co‐(ethyl cyanoacrylate)} copolymer nanoparticles

Poly{[α‐maleic anhydride‐ω‐methoxy‐poly(ethylene glycol)]‐co‐(ethyl cyanoacrylate)} (PEGECA) copolymers were prepared by radical polymerization of macromolecular poly(ethylene glycol) monomers (PEGylated) and ethyl 2‐cyanoacrylate in solvent. The structures of the copolymer were characterized by Fourier‐transform infrared (FTIR) and proton nuclear magnetic resonance (¹H‐NMR). The morphology and size of the PEGECA nanoparticles prepared by nanoprecipitation techniques were investigated by transmission electron microscopy (TEM) and photon correlation spectroscopy (PCS) methods. The results show that the PEGECA can self‐assemble into highly stable nanoparticles in aqueous media, and inner core and outer shell morphology. The size of the nanoparticles was strongly influenced by the solvent character and the copolymer concentration in the organic solvents. A hydrophobic drug, ibuprofen, was effectively incorporated into the nanoparticles, which provides a delivery system for ibuprofen and other hydrophobic compounds. Copyright © 2005 Society of Chemical Industry     

Biodegradable hollow fibres containing drug‐loaded nanoparticles as controlled release systems

A ‘multiple’ delivery system was studied, consisting of hollow microfibres containing drug‐loaded nanoparticles. Both fibres and nanoparticles are made of biodegradable polymers, so that the system does not need any surgical operation to be removed. The main advantage of the system is that it allows the contemporaneous release of different kinds of drugs. Copolymers of poly(lactic acid) and ?‐caprolactone were used for the preparation of the fibres through both wet and dry–wet spinning procedures. Two types of nanoparticles, gelatin and poly(DL ‐lactide‐co‐glycolide) nanoparticles, were prepared by simple water‐in‐oil and oil‐in‐water emulsions, respectively. Drugs such as dexamethasone and methotrexate were used to load the particles. The technique employed for the preparation of the nanoparticles filled fibres was described and the drug release characteristics of this system were investigated and compared with those of the free nanoparticles. © 2002 Society of Chemical Industry     

Controlled release of chlorpheniramine maleate through IPN beads of sodium alginate‐g‐methylmethacrylate

Controlled release of chlorpheniramine maleate drug, through sodium alginate‐g‐methylmethacrylate (NaAlg‐g‐MMA) interpenetrating polymeric network beads, has been investigated. Beads were prepared by precipitating the viscous solution of NaAlg‐g‐MMA in acetone followed by cross‐linking with glutaraldehyde. The beads were characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM). Different formulations of beads were developed by varying amounts of MMA, cross‐linking agent, and drug concentration. DSC thermograms of chlorpheniramine maleate drug‐loaded NaAlg‐g‐MMA beads confirmed the molecular level distribution of drug in the polymer matrix. FTIR of beads confirm the grafting and cross‐linking, SEM of the beads suggested the formation of spherical particles. Swelling experiments on the beads provided an important information on drug diffusion properties. Release data have been analyzed using an empirical equation to understand the nature of transport of drug containing solution through the polymeric matrices. The controlled release characteristics of the matrices for chlorpheniramine maleate was investigated in pH 7.4 media. Drug was released in a controlled manner upto 12 h. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterization of amphiphilic pluronic (F68)‐1,2‐dipalmitoyl‐sn‐glycero‐3‐phosphoethanolamine copolymers and their micelles as a drug carrier

A new Pluronic (F68)‐1,2‐dipalmitoyl‐sn‐glycero‐3‐phosphoethanolamine (DPPE) (Pluronic (F68)–DPPE) copolymer was synthesized with Pluronic (F68) and DPPE. The chemical structure and physical properties of copolymers were determined by FTIR, ¹H NMR, ¹³C NMR, ³¹P NMR, and TGA. Environmental scanning electron microscopy, fluorescence spectroscopy, and dynamic light scattering method confirmed the formation of copolymeric micelles of Pluronic (F68)‐DPPE. To estimate the feasibility as novel drug carriers, the copolymer micelles were prepared by the phase separation dialysis method. Amphotericin B as a lipophilic model drug was incorporated into copolymeric micelles and the drug release behavior was investigated. It was found that the chemical composition of the micelle was a key factor in controlling micelles size, drug‐loading content, and drug release behavior. As DPPE segment weight ratio increased, the micelle size and drug‐loading content increased, and the drug release rate decreased. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Electrochemical synthesis of poly(2‐iodoaniline) and poly(aniline‐co‐2‐iodoaniline) in acetonitrile

Poly(2‐iodoaniline) (PIANI) and poly(aniline‐co‐2‐iodoaniline) [P(An‐co‐2‐IAn)] were synthesized by electrochemical methods in acetonitrile solution containing tetrabutylammonium perchlorate (TBAP) and perchloric acid (HClO₄). The voltametry of the copolymer shows characteristics similar to those of conventional polyaniline (PANI), and it exhibits higher dry electrical conductivity than PIANI and lower than PANI. The observed decrease in the conductivity of the copolymer relative to PANI is attributed to the incorporation of the iodine moieties into the PANI chain. The structure and properties of these conducting films were characterized by FTIR and UV‐Vis spectroscopy and by an electrochemical method (cyclic voltametry). Conductivity values, FTIR and UV‐Vis spectra of the PIANI and copolymer were compared with those of PANI and the relative solubility of the PIANI and the copolymer powders was determined in various organic solvents. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1652–1658, 2003     

Self‐assembly micelles from novel tri‐armed star C3‐(PS‐b‐PNIPAM) block copolymers for anticancer drug release

Novel tri‐armed star polystyrene‐block‐poly(N‐isopropylacrylamide) block copolymers with trimesic acid as central molecules were synthesized by successive two‐step atom transfer radical polymerization, and confirmed by Fourier‐transform infrared spectra, ¹H nuclear magnetic resonance, and laser light scattering gel chromatography system. The copolymers could self‐assemble into spherical core‐shell micelles in aqueous media independent on drug loading. Physicochemical properties of the blank and drug‐loaded micelles were examined by surface tension, fluorescence spectroscopy, UV‐vis, transmission electron microscope, and dynamic light scattering measurements. The copolymer micelles exhibited thermo‐triggered phase transition, with low critical solution temperature of 33.7 and 34.6°C, varying with copolymer compositions. The critical aggregate concentrations were 11.62 and 47.61 mg L^?1, and hydrodynamic diameters from 200 to 220 nm. Water‐insoluble 10‐hydroxycamptothecine was encapsulated into the micelle aggregates to investigate the change in the resulting physicochemical parameters, thermo‐triggered in vitro drug release, and the applicability as drug targeting release carriers. MTT assays were carried out to uncover cytotoxicity of the newly developed micelle‐based drug formulations. © 2014 American Institute of Chemical Engineers AIChE J, 61: 35–45, 2015     

Grafting of N‐vinyl caprolactam and methacrylic acid onto silicone rubber films for drug‐eluting products

Silicone rubber (SR), a material widely used in the biomedical field, was modified with stimuli‐responsive poly(N‐vinyl caprolactam) (PVCL) and poly(methacrylic acid) (PMAA) with the aim of improving its ability to host drug molecules. The grafting of PVCL and PMAA onto SR was carried out by means of a γ‐ray preirradiation method, and the dependence of the grafting yield on the comonomer concentration, preirradiation dose, temperature, and reaction time was evaluated. Modified SR films were characterized by Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and swelling studies to confirm the grafting of the copolymer. The SR‐g‐[vinyl caprolactam (VCL)/methacrylic acid (MAA)] copolymers showed a sensitivity to the temperature and pH, high hemocompatibility, and low affinity to bovine serum albumin and fibrinogen proteins. Moreover, the SR‐g‐(VCL/MAA) copolymers were able to host some nonsteroidal anti‐inflammatory drugs, such as diclofenac and ibuprofen, and the antifungal agent nystatin. The graft copolymer was shown to be useful for providing sustained release for several hours; this indicates that the modified SR is a promising material for drug‐eluting medical devices. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41855.