共查询到20条相似文献,搜索用时 609 毫秒
1.
2.
3.
纳米氧化锌的制备与应用 总被引:7,自引:0,他引:7
纳米氧化锌作为一种功能材料,有着许多优异的性能和广泛的应用价值。对纳米氧化锌在国内外的研究现状、制备技术(固相法、液相法和气相法)及其应用状况进行了较为系统的评述,并提出了进一步研究的方向,对纳米氧化锌的形成机理及微观结构进行探讨,寻求行之有效的制备高纯、均匀纳米氧化锌的方法,以及制备各种性能的氧化锌粉体。 相似文献
4.
5.
纳米四氧化三铁的化学制备方法研究进展 总被引:1,自引:0,他引:1
阐述了纳米四氧化三铁在磁性材料、多功能材料、催化材料以及医学领域的应用现状。对纳米四氧化三铁的制备方法如沉淀法、溶胶-凝胶法、微乳液法、水热与溶剂热法、热分解法、静电纺丝法等做了介绍。分析了各种纳米四氧化三铁材料的形态如纳米颗粒、纳米棒、纳米线、纳米膜、杂化、核壳结构纳米晶等的适用领域。总结了各种制备方法的研究进展,分析了其优缺点并结合作者课题组在纳米四氧化三铁制备方面的研究工作,对纳米四氧化三铁的今后的研究方向作了展望:制备特殊形貌的纳米四氧化三铁材料、减少纳米四氧化三铁的团聚和氧化、多种制备方法的结合以及如何实现大规模工业化生产。 相似文献
6.
7.
纳米氧化铁的制备工艺 总被引:5,自引:0,他引:5
本文介绍了纳米氧化铁的作用及应用,阐述了各种制备纳米氧化铁的工艺,主要有水热法,强迫水解法,凝胶一溶胶法,微乳液法,辐射合成法,附着法,固相法,NAC—FAS法.以及其它一些制备纳米氧化铁的工艺。 相似文献
8.
介绍了等离子体法、液相还原法、电火花放电腐蚀法和高能球磨法等几种纳米镍粉的常见制备方法,总结了各种方法的优缺点,归纳了在纳米镍粉的制备过程中存在着难以实现规模化生产、纯度难以控制等问题;其研究趋势是通过分析其成核与生长机理,找到最佳合成条件以实现纳米镍粉的可控制备。另外,本文重点叙述了纳米镍粉在多层陶瓷电容器(MLCC)和催化剂等领域的应用现状,从应用的角度阐述了各个领域对纳米镍粉的需求。在纳米镍粉的应用中,存在着易氧化及同其他材料匹配性差等问题,需要通过表面改性等手段优化其应用性能。最后,文章指出将纳米镍粉的应用与其制备方法相结合,用最合适的方法制备出符合应用要求的纳米镍粉,是未来纳米镍粉的研究趋势。 相似文献
9.
10.
纳米TiO2的液相制备方法及其在涂料工业中的应用 总被引:3,自引:0,他引:3
综述了液相法合成纳米TiO2的制备方法,评价了各种方法的优缺点。介绍了纳米TiO2在涂料中的应用,指出了在纳米TiO2合成及应用研究中存在的问题和发展方向。 相似文献
11.
12.
橡胶纳米复合材料研究进展 总被引:1,自引:0,他引:1
对蒙脱土的结构、纳米材料的制备及橡胶纳米复合材料的一些特性作了简要介绍。分析了橡胶增强中几个主要因素的作用和地位,认为粒径是橡胶增强的第一要素,粒径因素包括部分表面活性因素和结构性因素,纳米增强是橡胶高效增强的必要条件,并指出炭黑和白炭黑增强橡胶属于纳米复合材料范畴。以橡胶纳米复合材料的制备方法(主要有:插层复合法、溶胶~凝胶法、原位分散法、和纳米直接共混法)为线索综述了橡胶基纳米复合材料的研究进展,分析了各种方法的优缺点及对其应用前景进行了展望。 相似文献
13.
Organic montmorillonite/brominated butyl rubber nanocomposites are prepared by improved solution blending, i.e., preparation of organic clay suspension and suspension blending with brominated butyl rubber solution by adding polytetramethylene ether glycol as interface agent. Scanning electron microscopy and atomic force microscopy show that polytetramethylene ether glycol has good dispersing effect on organic clay. Transmission electron microscopy and X-ray diffraction analysis demonstrates that both intercalated and exfoliated structures are obtained in organic montmorillonite/brominated butyl rubber nanocomposites. The mechanical performances and the gas barrier properties of the organic montmorillonite/brominated butyl rubber nanocomposites are improved greatly, which proves that the high-performance clay/rubber nanocomposites are prepared in nonpolar solvent. 相似文献
14.
橡胶/蒙脱土纳米复合材料的优异性能使其成为橡胶工业中富有潜力的一类新型材料。笔者综述了三元乙丙橡胶(EPDM)/蒙脱土纳米复合材料的制备方法、性能和工业应用领域等,讨论了蒙脱土片层的表面修饰、插层剂的选择以及复合材料的制备方法对材料性能的影响,并提出了三元乙丙橡胶/蒙脱土纳米复合材料这一新型橡胶材料在轮胎工业上的应用前景。 相似文献
15.
16.
Nitrile butadiene rubber/hindered phenol nanocomposites with improved strength and high damping performance 总被引:5,自引:0,他引:5
A hindered phenol (AO-80) was studied to prepare rubber nanocomposites with nitrile butadiene rubber (NBR). The NBR/AO-80 rubber nanocomposites were successfully developed by applying the adopted preparation procedure/conditions, especially by introducing mechanical kneading of the NBR/AO-80 composites at a temperature higher than the melting point of AO-80, followed by the crosslinking of NBR molecules during the subsequent hot-pressing/vulcanization process. The nanocomposites consisted of two phases: (1) the AO-80 enriched phase (nanoparticles with the average size of approximately 20 nm) and (2) the NBR enriched phase (matrix). The generation and uniform distribution of the nanoparticles were attributed to the high temperature mechanical kneading process, the strong intermolecular interactions between AO-80 and NBR molecules, and the formation of a three-dimensional NBR network. The morphological, structural and mechanical properties of the composites were systematically investigated in each preparation step using SEM, TEM, DSC, XRD, FT-IR, DMTA and a tensile tester. The results indicated that the prepared NBR/AO-80 rubber nanocomposites had single relaxation transitions, improved tensile strengths, high dynamic mechanical loss values, and reasonably good stabilities. The NBR/AO-80 rubber nanocomposites are expected to have important applications as a high performance damping material. 相似文献
17.
简要概述了粘土的有机改性机理、橡胶/粘土纳米复合材料的制备方法、结构与表征和橡胶/粘土纳米复合材料的研究进展. 相似文献
18.
19.