The High‐Pressure Characterization of Energetic Materials: 2‐Methyl‐5‐Nitramino‐2H‐Tetrazole

The isothermal structural properties, equation of state, and vibrational dynamics of 2MNT were studied under high‐pressure using synchrotron XRD and optical Raman and IR microspectroscopy. Analysis of the XRD patterns revealed no indication of a phase transition to near 15 GPa and the pressure‐volume isotherm remained smooth to 15 GPa. Near 15 GPa, significant sample damage was observed from the X‐ray beam which precluded the acquisition of patterns above this pressure. XRD and Raman spectroscopic measurements showed the monoclinic ambient condition phase of 2MNT remains the dominant phase to near 20 GPa, although a shift of the NO₂ IR active vibrational modes to lower frequencies suggested a subtle geometry modification not reflected in the XRD data.     

The High‐Pressure Characterization of Energetic Materials: 1‐Methyl‐5‐Nitramino‐1H‐Tetrazole

Pressure–volume relations and optical Raman and Infrared spectra of polycrystalline 1MNT have been obtained under quasi‐hydrostatic conditions up to 16 and 40 GPa, respectively, by using diamond anvil cell, synchrotron‐based angle‐resolved X‐ray diffraction, and microspectroscopy. The X‐ray measurements show that the pressure–volume relations remain smooth up to 16 GPa at room temperature, while vibrational measurements show no evidence of a phase transition to near 40 GPa. Anomalous increases of several vibrational intensities and bandwidths suggest that subtle molecular distortions and structural modifications occur in the crystal as pressure increases. Decompression experiments indicate the structural modifications are reversible.     

Zeo‐Click Synthesis: Copper‐Zeolite‐Catalyzed Synthesis of Ynamides

Copper(I)‐zeolites, especially copper(I)‐ultra stable Y zeolite (USY), are very efficient heterogeneous catalysts for the coupling of functionalized 1‐bromoalkynes and various nitrogen derivatives. Under these conditions, sulfonylated alkyl‐ or arylamines and various N‐heterocycles, such as oxazolidinones or indoles, could be efficiently transformed into the corresponding N‐alkynyl derivatives. However, imidazoles gave addition products rather than coupling products. The reaction conditions proved compatible with a variety of functional and protecting groups. Such zeolitic catalysts can be recycled and reused at least five times without significant deactivation. Low catalyst loading could be used (4 mol%) and as low as 0.8 mol% of this heterogeneous copper catalyst still gave good conversion and yields.

     

Bio‐inspired cationic polymerization of isoprene and analogues: state‐of‐the‐art

Natural rubber (NR), which is polyisoprene about 100% 1,4‐cis of high molar mass, > 10⁶ g mol^?1, is mainly produced in southeast Asia and represents around 40%–45% of total worldwide elastomer consumption. Whereas more than 2500 plant species are able to produce polyisoprenoids, the only established commercial source of NR is Hevea braziliensis. NR presents high performance properties that are so far not matched by synthetic rubbers. As a consequence, NR is irreplaceable in many applications (aircraft tires, surgery gloves etc.). Nature and synthetic polymer chemists start from different substrates to synthesize polyisoprenes, i.e. isopentenyl pyrophosphate (IPP), which is a universal building brick utilized by plants and animals, and isoprene monomer, respectively. Nevertheless, we proposed that the elementary processes involved in the biosynthesis of NR are very similar to those of cationic polymerization. In the course of a study on bio‐inspired cationic polymerization of isoprene and IPP analogues, it appeared that cationic polymerization of isoprene proceeds readily and leads mainly to its 1,4‐trans addition; such a process nevertheless remains difficult to control due to the occurrence of many side reactions (transfer, protic initiation, branching, cyclization). The present paper describes our understanding of the cationic polymerization of isoprene and its analogues catalyzed by different Lewis acids, in solution and aqueous dispersions. Copyright © 2011 Society of Chemical Industry     

The Low‐Temperature High‐Pressure Phase Diagram of Energetic Materials: I. Hexahydro‐1,3,5‐Trinitro‐s‐Triazine

The reaction phase diagram of hexahydro‐1,3,5‐trinitro‐s‐triazine (RDX) has been studied as a function of temperature and pressure by Raman spectroscopy to 29 GPa and temperatures ranging from 4 to 298 K. Three stable phases (α, γ, and δ) have been found and their phase stabilities have been investigated. Phase boundaries were studied as a function of pressure and temperature, permitting a delineation of the various polymorph stability fields. A pressure–temperature reaction/phase diagram is constructed from the results of this study and compared to previous high temperature work.     

Thermo‐ and pH‐ responsive copolymers: Poly(n‐Isopropylacrylamide‐co‐IAM) copolymers

Poly(N‐isopropylacrylamide) (NIPAAm) is well known as a smart material with good thermal sensitivity and favorable biocompatibility. A series of new smart hydrogels, NIPAAm copolymerized with IAM (itaconamic acid; 4‐amino‐2‐methylene‐4‐oxobutanoic acid), were synthesized through radical solution polymerization in this work. Poly(NIPAAm‐co‐IAM) can respond to the changes of temperature as well as pH value. Such a characteristic is due to the fact that IAM contains not only a hydrophilic acrylic acid moiety but also an acrylamide moiety to be thermal and pH sensitive. The experimental results show that the lower critical solution temperature (LCST) of the copolymer increases as the molar fraction of IAM increases. Moreover, based on the current experimental data, 3 wt % of Poly(NIPAAm‐co‐IAM) aqueous solution in this study exhibits a phase transition temperature (37.8°C) close to the human body temperature in the buffer solution of pH 7 possibly to be useful in drug delivery. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42367.     

Self‐Immobilizing Precatalysts: Norbornene‐Bridged Zirconium ansa‐Metallocenes

We report here the synthesis of new tethered biscyclopentadienyl and bisindenyl zirconocenes, bearing one unsaturation on the interannular bridge, and their use as self‐immobilizing catalysts. They proved to be active catalysts towards ethylene polymerization in solution, with activities comparable to those displayed by commercial rac‐Et(Ind)₂ZrCl₂. When tested as self‐polymerization catalysts under suitable experimental conditions, they gave colored precipitates that, once reactivated with MAO, were significantly active in ethylene polymerization, although lower than those of the corresponding catalytic systems in solution. The molecular weights of the produced polymers were similar to those obtained with the same catalysts in solution, but their distribution resulted to be broader, with values typical of heterogeneous catalytic systems. From ¹³C NMR studies we had the first spectroscopic evidence of the actual incorporation of a metallocene of this type into a polymeric chain.     

Sulfoxide‐to‐Sulfilimine Conversions: Use of Modified Burgess‐Type Reagents

Sulfoxides can directly be converted into N‐cyanosulfilimines using a new Burgess‐type reagent. By applying this strategy with a related reagent variant, synthetically valuable NH‐sulfoximines have been prepared from sulfoxides via N‐protected sulfilimines. The practical three‐step reaction sequence is generally high yielding and applicable to a wide range of substrates. The sulfoxide‐to‐sulfilimine conversion can also be performed under solvent‐reduced conditions in a ball mill.

     

1,2,3,4‐Tetrachloro‐5,5‐dimethoxy‐cyclopenta‐1,3‐diene: Diels Alder Reactions and Applications of the Products Formed

Readily available 1,2,3,4‐tetrachloro‐5,5‐dimethoxy‐ cyclopenta‐1,3‐diene ( 2 ) is an excellent cyclic diene for Diels—Alder reaction with a vast variety of dienophiles. The products so formed (norbornene derivatives) constitute important building blocks for the synthesis of diverse complex natural as well as non‐natural products. Apart from very high endo selectivity associated with Diels—Alder reactions, there are several other fascinating features associated with these bicyclic products which make them convenient entities in the synthesis of complex molecules. The most important is the rigid framework that act as a powerful template to provide high degree of selectivity and directional nature to various substituents. The proposed article is intended to focus on Diels‐Alder reactions of 2 and the applications of norbornene derivatives in organic synthesis.     

Synthesis and reactive features of a terpolymer: Poly(N‐vinyl‐2‐pyrrolidone‐co‐vinyl acetate‐co‐glycidyl methacrylate)

A polyvinyl pyrrolidone terpolymer system is described that can be chemically cross‐linked at moderate, 70–100°C, temperatures. The system has significant potential for development of durable long‐lasting pyrrolidone coatings in a wide range of applications, particularly in water filtration membrane construction where leaching is an unresolved, serious problem. The synthesis of the terpolymer, poly(N‐vinyl‐2‐pyrrolidone‐co‐vinyl acetate‐co‐glycidyl methacrylate), by free radical polymerization is described. The reactive features of this terpolymer are presented in the context of acidic anhydride curing. In a polar aprotic solvent, the terpolymer is reacted with poly(methyl vinyl ether‐co‐maleic acid) and cured thermally. Key aspects of the terpolymer synthesis and the acid anhydride cross‐linking reaction using DSC, rheology, FTIR, and a small molecule model system to study the cross‐linking chemistry are presented. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

1‐amino‐4,5‐8‐naphthalenetricarboxylic acid‐1,8‐lactam‐4,5‐imide‐containing macrocycles: synthesis,molecular modelling and polymerization

Novel macrocycles containing 1‐amino‐4,5‐8‐naphthalenetricarboxylic acid‐1,8‐lactam‐4,5‐imide and 1,4,5‐8‐naphthalenetetracarboxylic bisimide fragments were synthesized by the high‐temperature pseudo‐high‐dilution acylation of the corresponding diols with isophthaloyl chloride, 4,4′‐ and 2,2′‐dichlorocarbonyl biphenyls with up to 60% yield. An important side‐reaction that impedes cyclization was found to be the reaction of diol OH groups with HCl during the acetylation. The ring strain in synthesized macrocyles and model cycles was estimated using the isodesmic reaction approach at the B3LYP/6–311 + G(d,p)//HF/3–21G level of theory. Lactamimide‐containing macrocycles were found to be more strained than bisimide‐containing macrocycles. The ring‐opening polymerization (ROP) of synthesized macrocycles in the molten state shows that the driving force of this process is the strain release on ring‐opening. The ROP of lactamimide‐containing macrocycles was found to be an efficient way to obtain lactamimide‐containing polymers, which are otherwise difficult to synthesize. Copyright © 2003 Society of Chemical Industry     

Calixarene‐Derived Mono‐Iminophosphoranes: Highly Efficient Ligands for Palladium‐ and Nickel‐Catalysed Cross‐Coupling

The first mono‐iminophosphoranes based on a calix[4]arene skeleton have been synthesised and tested in the arylation of aryl bromides and aryl chlorides. Combining these ligands with [Pd(OAc)₂] or [Ni(cod)₂] resulted in highly active Suzuki–Miyaura and Kumada–Tamao–Corriu cross‐coupling catalysts, respectively. TOFs up to ca. 4×10⁵ mol(ArBr)⋅mol(M)⁻¹⋅h⁻¹ were obtained in each case. The remarkable activities observed probably arise from the ligands’ ability to form complexes with cavity‐entrapped “MArX” moieties (endo‐complexes), their highly crowded metal environment favouring formation of mono‐ligated intermediates over that of less reactive bis‐ligated ones. Possible supramolecular interactions within the cavity involving the receptor wall and the aromatic substrate may also significantly influence the reaction rates, notably by increasing the proportion of endo‐complexes.     

Hydrogel‐forming agar‐graft‐PVP and κ‐carrageenan‐graft‐PVP blends: Rapid synthesis and characterization

Grafting of agar and κ‐carrageenan with polyvinylpyrrolidone (PVP, average molecular weight 10,000 D) in an aqueous medium at a pH of about 7 produced agar‐graft‐PVP and κ‐carrageenan‐graft‐PVP blends capable of forming hydrogels. The reaction was carried out with microwave irradiation in the presence of a water‐soluble initiator, potassium persulfate. Optimum microwave irradiation conditions for obtaining hydrogels of the grafted products were achieved. The structural characteristics and thermal stability of the grafted blends were studied by Fourier transform infrared, ¹³C‐NMR, and thermogravimetric analyses. Appearance of new IR bands at 1661, 1465, and 1426 cm^?1 in the grafted products indicated the insertion of PVP into the polysaccharide structure. Powder X‐ray diffraction studies revealed the enhanced crystallinity in the products compared to in the control polysaccharides as well as PVP. Agar and κ‐carrageenan were grafted to a considerable degree, with 62.5 E % and 125 G % for agar‐graft‐PVP and 65.5 E % and 131 G % for κ‐carrageenan‐graft‐PVP. Optical micrographs of the grafted blends indicated considerable changes in the morphology of the agar and the κ‐carrageenan, substantiating the X‐ray diffraction data. A plausible mechanism for the crosslinking of PVP to agar and κ‐carrageenan is proposed. These hydrogels exhibited enhanced water‐holding capacity despite weaker gel strength than that in the respective control polysaccharides. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3654–3663, 2006     

The High‐Pressure Characterization of Energetic Materials: 1,4‐Dimethyl‐5‐Aminotetrazolium 5‐Nitrotetrazolate

In‐situ high‐pressure room temperature synchrotron X‐ray diffraction and infrared microspectroscopy were used to examine the structural and vibrational properties and the equation of state of 1,4‐dimethyl‐5‐aminotetrazolium 5‐nitrotetrazolate (DMATNT). The X‐ray measurements show a smoothly varying pressure‐volume relationship to 20 GPa. However, the anisotropic ratios of the unit cell parameters reveal a discontinuity near 3.3 GPa, which can be attributed to an irreversible isostructural phase transition. A significant increase in the Infrared spectral intensity near this pressure coupled with Dayvdov splitting of the NO₂ bending and scissoring modes suggest the transition results in a skewing of the NO₂ groups and increasing asymmetry of the hydrogen bonding sublattice.     

Soybean‐ and castor‐oil‐based thermosetting polymers: Mechanical properties

Maleic anhydride modified soybean‐ and castor‐oil‐based monomers, prepared via the malination of the alcoholysis products of the oils with various polyols, such as pentaerythritol, glycerol, and bisphenol A propoxylate, were copolymerized with styrene to give hard rigid plastics. These triglyceride‐based polymers exhibited a wide range of properties depending on their chemical structure. They exhibited flexural moduli in the 0.8–2.5 GPa range, flexural strength in the 32–112 MPa range, glass transition temperatures (T_g) ranging from 72 to 152°C, and surface hardness values in the 77–90 D range. The polymers prepared from castor oil exhibited significantly improved modulus, strength, and T_g values when compared with soybean‐oil‐based polymers. These novel castor and soybean‐oil‐based polymers show comparable properties to those of the high‐performance unsaturated polyester (UP) resins and show promise as an alternative to replace these petroleum‐based materials. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1497–1504, 2006     

Camptothecin‐7‐yl‐methanthiole: Semisynthesis and Biological Evaluation

The introduction of a methylenthiol group at position 7 of camptothecin was carried out in four steps. This preparation also yielded the corresponding disulfide, which behaves as a prodrug due to its reactivity with glutathione. Assessment of their antiproliferative activities, investigations of their mechanism of action, and molecular modeling analysis indicated that the 7‐modified camptothecin derivatives described herein maintain the biological activity and drug–target interactions of the parent compound.