Synthesis and photopolymerization of acrylic acrylate copolymers

Acrylate‐functionalized copolymers were synthesized by the modification of poly(butyl acrylate‐co‐glycidyl methacrylate) (BA/GMA) and poly(butyl acrylate‐co‐methyl methacrylate‐co‐glycidyl methacrylate). ¹³C‐NMR analyses showed that no glycidyl methacrylate block longer than three monomer units was formed in the BA/GMA copolymer if the glycidyl methacrylate concentration was kept below 20 mol %. We chemically modified the copolymers by reacting the epoxy group with acrylic acid to yield polymers with various glass‐transition temperatures and functionalities. We studied the crosslinking reactions of these copolymers by differential scanning calorimetry to point out the effect of chain functionality on double‐bond reactivity. Films formed from acrylic acrylate copolymer precursors were finally cured under ultraviolet radiation. Network heterogeneities such as pendant chains and highly crosslinked microgel‐like regions greatly influenced the network structure and, therefore, its viscoelastic properties. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 753–763, 2002     

Low‐temperature photopolymerization and post‐cure characteristics of acrylates

Near‐infrared spectroscopy was used to investigate the post‐cure characteristics of acrylates polymerized from ? 75 °C up to room temperature. The results obtained showed that the double bond conversion increased with increasing initiator concentration. Post‐cure was much more striking for samples cured at lower temperatures. The chemical structure of monomer and photoinitiator had a great effect on the post‐cure process. The greater the functionality, the lower the final double bond conversion and the more distinct the post‐cure effect. Copyright © 2006 Society of Chemical Industry Society of Chemical Industry     

Synthesis and photopolymerization kinetics of oxime ester photoinitiators

Oxime Ester (OXE) Photoinitiators were synthesized and characterized by HPLC, FTIR, UV–Vis spectra, and ¹H‐NMR. The UV–Vis spectra of these photoinitiators were similar to Benzophenone (BP) but showed large red‐shifted maximum absorption. OXE were not only soluble in many solvents and (meth) acrylate monomers but also could be dispersed easily in propylene glycol monomethyl ether acetate (PGMEA). The kinetics of polymerization of monomer using OXE as photoinitiator was studied by Real‐time infrared (RTIR) spectra. It showed that OXE were an efficient photoinitiator. The concentration of OXE, functionality of monomer, and light intensity had effect on the photopolymerization kinetics. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Cationic photopolymerization of bisphenol A diglycidyl ether epoxy under 385 nm

The cationic photopolymerization of bisphenol A diglycidyl ether epoxy (DGEBA) at λ = 385 nm was conducted by the combination of a cationic photoinitiator PAG30201 (Bis (4‐isobutylphenyl) iodonium hexafluorophosphate) and a photosensitizer PSS303 (9,10‐dibutoxy‐9,10‐dihydroanthrance). The kinetic characterization was investigated by real‐time Fourier transform infrared spectroscopy. The enhancement of epoxy conversion of DGEBA was achieved by increasing temperature, adding alcohols, active monomers and radical photoinitiators. As a result, in the presence of 2 wt % PAG30201 and 1.2 wt % PSS303, the epoxy rings conversion of DGEBA has reached to more than 70% from 55.9% at room temperature; it could be increased to almost 80% if heated to 60°C. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3698–3703, 2013     

Kinetics studies of hybrid structure formation by controlled photopolymerization

Real-time FT-NIR spectroscopy was used to monitor the individual monomer photopolymerization kinetics within the hybrid methacrylate/vinyl ether system composed of 2-phenoxyethyl methacrylate and tri(ethylene glycol) methyl vinyl ether. Photopolymerization processing conditions, such as light intensity, photoinitiator type (both free radical and cationic) and initiator ratios and concentrations, that provide preferential direction of polymer formation based on individual monomer photopolymerization kinetics and overall conversion have been evaluated. Single source UV-light irradiation was employed to produce either single or dual-stage hybrid polymerization, validating the potential of one-step, one-pot methodology for initiating stage-curable polymerizations.     

Synthesis of superabsorbent resin by ultraviolet photopolymerization

Synthesis of superabsorbent resin (SAR) was achieved by a new method, that of direct UV photopolymerization, and in particular the synthesis of a SAR of acrylic acid–potassium acrylate copolymer by UV photopolymerization was investigated. Influences of ratio (mol) of acrylate monomer to acrylic acid monomer, photoinitiators, crosslinking agents, and exposure time of UV light on the water‐absorbent properties were investigated. The results showed that the water absorbency (Q) of SAR based on Irgacure 1700 or Irgacure 1800 was 545–530 mL/g, but under the same conditions Q was 450 mL/g for the SAR based on Irgacure 651. N,N′‐Methylene bisacrylamide, hydroethyl acrylate, and glycerol were used as crosslinking agents, of which N,N′‐methylene bisacrylamide was the most effective. It crosslinked the molecular chains through attending the copolymerization with acrylic acid (AA) and potassium acrylate. When the exposure time was 5 min, the value of Q was 1368 mL/g (the content of N,N′‐methylene bisacrylamide was 100 ppm). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1618–1624, 2004     

Efficiency of 2,2‐dimethoxy‐2‐phenylacetophenone for the photopolymerization of methacrylate monomers in thick sections

The efficiency of 2,2‐Dimethoxy‐2‐phenylacetophenone (DMPA) for the photopolymerization of methacrylate monomers in thick sections was assessed. DMPA is an efficient photoinitiator for thick sections (≈2 mm) because a fast reaction and high conversions are obtained with concentrations as low as 0.25 wt % DMPA. The polymerization rate increased when the DMPA content increased from 0.125 wt % to 0.25 wt %. However, the conversion versus irradiation time profiles in resins containing 0.25 wt % or 0.5 wt % DMPA were similar. This is attributed to the screening effect caused by excessive levels of DMPA. In addition, the consumption of DMPA under UV irradiation was accompanied by the appearance of light absorbing photoproducts. Because the absorbing species nearest to the light source absorb part of it, the light fails to reach the deeper layers of the sample. The overall effect of light screening is a reduced photoinitiation rate and double bond conversion along the irradiation path. This effect was compensated by the use of irradiation sources of higher intensity; which increased the initiation rate by increasing the production of primary radicals. DMPA is colorless and it does not require the presence of amine as coinitiator. These properties make DMPA attractive as photoinitiator of dental composites. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Kinetics of UV‐initiated RAFT crosslinking polymerization of dimethacrylates

The UV‐initiated RAFT polymerizations of a series of poly(ethylene glycol) dimethacrylates (PEGDMA) were investigated using differential scanning photocalorimetry (DPC) at room temperature. The rate of the RAFT system was much lower than that of a conventional free radical polymerization. A mild autoacceleration occurred as the addition reaction became diffusion controlled. The influence of the spacer length (CH₂CH₂O)_x between the vinyl moieties of the dimethacrylates on the polymerization kinetics was examined. The polymerization rate of PEGDMA decreased with an increased x value from 4 to 9, but it increased with a further increased x value from 9 to 14. Mechanical properties of the resulting polymers were also examined by dynamic mechanical analysis (DMA). It was concluded that the presence of the RAFT agent during polymerization of multifunctional monomers did not have an effect on the heterogeneity of the polymer network. In comparison with three different PEGDMAs, the PEGDMA with the longest spacer formed the most homogeneous networks with a lower crosslinking density. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Controlled free radical photopolymerization of styrene initiated by trithiocarbonate

Density functional theory calculations are reported for prediction of the trends in C S bond dissociation energies and atomic spin densities for radicals using S,S′‐bis(α,α′‐dimethyl‐α‐acetic acid) trithiocarbonate (TTCA) and bis(2‐oxo‐2‐phenylethyl) trithiocarbonate (TTCB) as reversible addition fragmentation chain transfer (RAFT) reagents. The calculations predict that the value of the C S bond length (1.865 Å) of TTCA is longer than that (1.826 Å) of TTCB, and TTCA is more effective for the polymerization of styrene (St) compared to TTCB as predicted by density functional theory. In photopolymerizations, pseudo‐first‐order kinetics were confirmed for TTCB‐mediated photopolymerization of St due to the linear increase of ln([M]₀/[M]) up to about 28% conversion, suggesting the living characteristics behavior of the photopolymerization of St in the presence of TTCB. For both TTCA and TTCB the polydispersities change with increasing conversion in the range 1.10–1.45, typical for RAFT‐prepared (co)polymers and well below the theoretical lower limit of 1.50 for a normal free radical polymerization. In addition, the triblock copolymer polystyrene‐block‐poly(butyl acrylate)‐block‐polystyrene (PS PBA PS) was successfully prepared, with very good control over molecular weight and narrow polydispersity (M_w/M_n = 1.45), using PS S C(S) S PS as macro‐photoinitiator under UV irradiation at room temperature. This indicated that this reversible and valid strategy led to a better controlled block copolymer with defined structures. Copyright © 2007 Society of Chemical Industry     

Role of phenolic derivatives in photopolymerization of an acrylate coating

The photopolymerization of acrylate resins on wood surfaces suffers from retardation and inhibition effects due to the phenolic derivatives present at the interface. This article details the study of the effect of a set of phenolic compounds on the initiation step. The global effect was recorded by differential scanning calorimetry and photocalorimetry. A comparison between a direct photocleavable initiator such as 2,2‐dimethyloxy‐2‐phenylacetophenone (DMPA) and a two‐component system like benzophenone/N‐methyldiethanolamine (BP/MDEA) suggests that the retardation effect observed in the latter case is due to the interaction between phenols and the triplet state of BP. Subsequently, nanosecond transient absorption (NTA) spectroscopy was used to measure in acetonitrile the quenching rate constants k_Q. A hydrogen abstraction occurred, and the ketyl radical quantum yield was also determined by NTA experiments. In comparison with the photoreduction mechanisms proposed in the literature, the high k_Q values obtained were tentatively correlated to the half‐wave oxidation potentials of phenols in order to discuss the involvement of an electron transfer within the reaction. Some EPR experiments were done to confirm in situ the photoreduction process at the wood surface and the creation of phenoxyl radicals. The interaction of phenols with some initiating radicals was also studied. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 2061–2074, 2000     

Ultraviolet photopolymerization and performances of fast‐water absorbing sodium polyacrylate

A kind of fast‐water absorbing sodium polyacrylate was prepared by UV polymerization under no crosslinker or initiator condition. Influence of factors, such as exposure time, neutralization degree, polymerization temperature, and monomer concentration on the absorption rate of the resin, were investigated. Its pH sensitivity, average absorption rate in distilled water and saline under load were also studied, respectively. The obtained resin reached to considerably high absorption rate: 4.6 g/g min and 2.6 g/g min even under 8000 Pa load in distilled water and 0.9% NaCl solution, respectively. Simultaneously, the resin displayed excellent water absorbency and water retention capacity. The impact of pH value on absorption rate reflected that the absorption rate was greatly influenced by pH. Synthesized polymer was characterized by FTIR, ¹H‐NMR, and SEM. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42787.     

Efficient visible photoinitiator with high‐spectrum stability in an acid medium for free‐radical and free‐radical‐promoted cationic photopolymerization based on erythrosine B derivatives

Three dye‐linked photoinitiators with excellent spectral stability in an acid medium were synthesized by the covalent bonding of a coinitiator (tertiary amine) and a benzoyl group or two coinitiators to the phenolic and carboxyl group position of erythrosine B. The combination of the iodonium salt and free tertiary amino used to initiate the free‐radical/cationic visible photopolymerization was investigated to acquire the relationship between the structure and performance. The photoinitiating ability of the derivative with the phenolic position bearing a coinitiator was poorer than of the derivative with the carboxyl group bearing one because of the strong back electron transfer of the former. For the derivative with a linked coinitiator on the carboxyl position, the proximity effect between the sensitizer and the coinitiator moiety resulted in an excellent photoinitiating ability for radical/cationic polymerization; this suggested its potential for application. Although radical/cationic photopolymerization could be initiated by the derivative/coinitiator/iodonium salt, the different component ratios between them had different effects on these two polymerizations; this provided useful information for the design of effective photoinitiators for different polymerizations. On the basis of the fluorescence quenching and photopolymerization results, a corresponding synergistic mechanism was proposed. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43035.     

Ionic liquids as catalytic additives for the acceleration of the photopolymerization of poly(ethylene glycol dimethacrylate)s

BACKGROUND: The fast development of practical applications of photopolymerizable compositions (PPCs) leads to a growing demand for the elaboration of novel monomers and simultaneously for the investigation of three‐dimensional polymerization mechanisms including the possible influence of initiator, additives, etc. The aim of the current study is to explore and clarify the role of ionic liquids (ILs) as environmentally friendly catalytic additives in the photopolymerization of poly(ethylene glycol dimethacrylate)s. RESULTS: The photopolymerization of triethylene glycol dimethacrylate (TEGDM) and poly(ethylene glycol‐400 dimethacrylate) (PEGDM) in the presence of various ILs both imidazolium‐based, i.e. [1‐methyl‐3‐alkylim]⁺ (CF₃SO₂)₂N^? (im = imidazolium; alkyl = C₂H₅, C₄H₉, C₁₄H₂₉), and phosphonium‐based, i.e. [P⁺ (C₆H₁₃)₃(C₁₄H₂₉)]X^? (X^? = PF₆^?, BF₄^?, (CF₃SO₂)₂N^?, Cl^?), as catalytic additives was investigated. The influence of the concentration of the ionic salts as well as the nature of the ILs upon the photopolymerization was studied in detail. It was found that imidazolium ILs accelerate TEGDM photopolymerization and suppress the polymerization of PEGDM. In contrast, polymerization of PEGDM with extra small amounts of phosphonium ionic solvents proceeded at a high rate and offered access to new polymers and the utilization of low‐reactivity monomers in PPCs. CONCLUSION: The most striking advantage is that the use of certain ILs permits the control of polymerization rate to achieve maximum oligomer conversion. Copyright © 2007 Society of Chemical Industry     

Synthesis of novel macrophotoinitiator for the photopolymerization of acrylate

A new kind of macrophotoinitiator (MPI) was synthesized through the copolymerization of acrylic monomers and the polymerizable photoinitiator monomer 2959‐AA. Monomer 2959‐AA was obtained by an esterification reaction between acrylic acid (AA) and the water‐soluble photoinitiator Irgacure 2959 [2‐hydroxy‐4‐(2‐hydroxyethoxy)‐2‐methylpropiophenone]. By adjusting the monomer proportions in the MPIs, two series of MPIs with different 2959‐AA contents and different glass transition temperatures were obtained. The molecular structure of 2959‐AA was characterized by Fourier‐transform infrared spectroscopy, nuclear magnetic spectrometry, and mass spectrometry. Polymerization of 1, 6‐hexanediol diacrylate was initiated using Irgacure 2959 and 2959‐AA, and two series of MPIs to be polymerized were studied with a photo‐DSC test. Results showed that 2959‐AA had higher chemical reactivity than Irgacure 2959 because of the higher solubility of the former. It was evident from the experiments that 2959‐AA content in the MPI progressively increased the polymerization rate and monomer conversion when the glass transition temperatures of MPIs were similar. At the same 2959‐AA content, the polymerization rate slightly slowed down with increased glass transition temperature. However, the radical lifetime and polymerization time were prolonged. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40352.     

Synthesis of bis(2,3‐epoxycyclohexyl) and its cationic photopolymerization in the presence of different diols

BACKGROUND: An ester‐free cycloaliphatic di‐epoxide, bis(2,3‐epoxycyclohexyl), with epoxycyclohexyl moieties linked via carbon–carbon bonds was synthesized and characterized. The photopolymerization of the di‐epoxide was systemically investigated in the presence of different diols, 1,2‐ethanediol, 1,4‐butanediol, 1,2‐propanediol and pinacol, using real‐time Fourier transform infrared spectroscopy to follow the reaction process. RESULTS: Among the four diols, the presence of pinacol resulted in the fastest photopolymerization rate and highest degree of conversion of di‐epoxy groups, but a relatively low gel content, while the addition of 1,2‐ethanediol led to an inhibiting effect on the di‐epoxide reaction rate, but the product showed the highest gel content. The influences of the diols on the cationic photopolymerization behavior of the di‐epoxide were explained according to the steric hindrance, proton‐trapping ability and electronic effect of the diols. CONCLUSION: The study results provide the possibility to conveniently manipulate the photopolymerization rate and modify the properties of an epoxy resin by simply adjusting the structure and amount of added diol in the polymerization system to meet the demands for potential microelectronic and optoelectronic packaging applications. Copyright © 2008 Society of Chemical Industry     

Preparation and performance of thermosensitive poly(N‐isopropylacrylamide) hydrogels by frontal photopolymerization

In this study, frontal photopolymerization was applied to the fabrication of thermosensitive poly(N‐isopropylacrylamide) (PNIPAm) hydrogels. The influence of experimental conditions and reactant components on the feature of the polymerization front was investigated. The morphology of the samples indicated the successful preparation of PNIPAm hydrogels. The mechanical properties and thermal stability of the obtained hydrogels are discussed. The results indicated that the performance of the hydrogels is related to their microstructure and the type of crosslinkers. The swelling behavior and drug delivery ability were determined under different temperature conditions. The hydrogels exhibit a classical thermoresponsive behavior, which was also demonstrated by the DSC results. Therefore, frontal photopolymerization can be an alternative method for the preparation of PNIPAm hydrogels under mild conditions. © 2019 Society of Chemical Industry     

Curing kinetics of UV‐initiated cationic photopolymerization of divinyl ether photosensitized by thioxanthone

Photodifferential scanning calorimetry was used to investigate the photocuring kinetics of UV‐initiated cationic photopolymerizations of 1,4‐cyclohexane dimethanol divinyl ether (CHVE) monomer with and without a photosensitizer, 2,4‐diethylthioxanthone (DETX), in the presence of a diaryliodonium‐salt photoinitiator. Two kinetics parameters, the rate constant (k) and the order of the initiation reaction (m), were determined for the CHVE system with different amounts of added DETX photosensitizer (0–1 wt %) and at different isothermal temperatures (25–55°C) using an autocatalytic kinetics model. The photosensitized CHVE system exhibited much higher k and m values than did the nonphotosensitized system, which was attributable to the effects of photosensitization. Furthermore, the values of k and m for both CHVE systems increased significantly with increasing isothermal temperature because of a thermal contribution toward increasing the mobility of active species. The addition of DETX lowered the activation energy for the UV‐curable vinyl ether system. The collision factor for the system with DETX was higher than that obtained for the system without DETX, indicating that the reactivity of the former was greater than that of the latter because of the photosensitization effect. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1345–1351, 2005     

Synthesis of poly(epichlorohydrin‐g‐methyl methacrylate) and poly(epichlorohydrin‐g‐styrene) graft copolymers by a combination of cationic and photopolymerization methods

Poly(epichlorohydrin‐g‐styrene) and poly (epichlorohydrin‐g‐methyl methacrylate) graft copolymers were synthesized by a combination of cationic and photoinitiated free‐radical polymerization. For this purpose, first, epichlorohydrin was polymerized with tetrafluoroboric acid (HBF₄) via a cationic ring‐opening mechanism, and, then, polyepichlorohydrin (PECH) was reacted ethyl‐hydroxymethyl dithio sodium carbamate to obtain a macrophotoinitiator. PECH, possessing photolabile thiuram disulfide groups, was used in the photoinduced polymerization of styrene or methyl methacrylate to yield the graft copolymers. The graft copolymers were characterized by ¹H‐NMR spectroscopy, differential scanning calorimetry, and gel permeation chromatography. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

On the inhibiting effect of phenolic compounds in the photopolymerization of acrylates under high‐intensity and polychromatic UV/visible lights

The photopolymerization of wood coatings under UV and visible light in industrial type conditions has been investigated. The inhibiting effect of the phenolic compounds found in wood extractives, especially quercetin, on the final properties of the coating (hardness, gel content) as well as the polymerization kinetics (rates, final conversion) has been discussed. Model clear‐coating formulations — based on an acrylate oligomer, a reactive diluent and a bis‐acylphosphine oxide as photo‐initiator — have been used. This article focuses on the influence of the nature of the acrylate oligomer (polyester, epoxy, polyurethane), the type of phenolic derivative (POHs) and the irradiation conditions (UV conveyor, Xe lamp). It appears that lead to through the strong inner‐filter effect in the presence of quercetin is responsible for the loss of all the observed properties. In order to mimic what happens at the wood–coating interface, the role of the diffusion of the phenolic derivatives have been also investigated and discussed. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3285–3298, 2007     

Evaluation of Difunctional Vinylcyclopropanes as Reactive Diluents for the Development of Low‐Shrinkage Composites

Polymerization shrinkage of dental composites remains a major concern. Free‐radically polymerizable cyclic monomers can be a conceivable alternative to methacrylates for the development of low‐shrinkage composites. In this study, the one‐step synthesis of the novel low viscosity difunctional vinylcyclopropanes 1 – 4 is described. Photopolymerization kinetics of these monomers are investigated by photo‐differential scanning calorimeter, using bis(4‐methoxybenzoyl)diethylgermane as photoinitiator. Real‐time near‐infrared photorheology measurements are performed to evaluate rheological behavior (i.e., time of gelation, polymerization‐induced shrinkage force) and chemical conversion (i.e., double bond conversion at the gel point, final double bond conversion) of the vinylcyclopropanes in situ. The potential of these monomers as reactive diluents in dental restorative materials is evaluated. Composites based on vinycyclopropanes 1 – 4 show good mechanical properties and exhibit significantly lower volumetric shrinkage and shrinkage stress than corresponding dimethacrylate‐based materials. The results indicate that such monomers are promising candidates for the replacement of commonly used low viscosity dimethacrylates such as triethylene glycol dimethacrylate in dental composites.