共查询到19条相似文献,搜索用时 93 毫秒
1.
将593脂肪胺固化剂、脂环胺固化剂、芳香胺固化剂及咪唑类固化剂复配,并加入促进剂DMP-30及活性稀释剂苯基缩水甘油醚与E-51环氧树脂构成了快速固化环氧树脂体系,测试了不同固化体系的凝胶时间和完全固化时间及其浇注体的力学性能。结果表明,在10 min内完全固化的情况下,E-51、芳香胺及咪唑固化剂的质量比为100∶15∶5时,固化体系的拉伸强度可达到67 MPa,较脂肪胺体系提高20%,弯曲强度和冲击强度分别达到88 MPa和11 kJ/m2,较单一胺类固化体系提高50%和40%。 相似文献
2.
3.
4.
5.
6.
以聚酰胺651及自制的M6640改性脂环胺为固化剂分别与环氧树脂E-51配制成管式陶瓷膜表面封端用胶粘剂,通过示差扫描分析法(DSC)、胶粘剂力学性能及腐蚀液的化学需氧量(COD)测试,考察了环氧固化剂种类、M6640改性脂环胺与环氧树脂E-51的质量比、固化条件对环氧胶粘剂的力学性能及耐碱性等的影响。结果表明,m(M6640改性脂环胺):m(环氧E-51)=50:100,固化条件25℃/24 h+80℃/4 h时,胶的剪切强度17.49 MPa、拉伸强度78.72 MPa、压缩强度105.32 MPa、弯曲强度120.58 MPa、硬度90.5 HD,Tg65.3℃,耐碱腐蚀,可满足陶瓷膜端面胶的应用要求。 相似文献
7.
8.
以504及554/504分别作为固化剂,采用锥形双螺杆挤出机实现了PVC与环氧树脂的熔融共混,制备了PVC/环氧树脂E51共混物。固化剂用量为环氧树脂E51用量的80%时,研究了环氧树脂E51用量、固化剂组成及固化时间对PVC/环氧树脂E51共混物力学性能及维卡软化温度的影响。结果表明:以504及554/504为固化剂,少量环氧树脂E51(4份以内)加入PVC后,有助于提高共混物的拉伸强度、弯曲强度;当环氧树脂E51为2份、固化时间为8h时,共混物维卡软化温度达到最大值100.2℃,比纯PVC高出16.5℃。 相似文献
9.
以液态聚硫橡胶为增韧剂,低分子量聚酰胺为固化剂,制备聚硫橡胶/环氧树脂快速模具材料。以冲击强度、压缩强度和固化时间为考核指标,通过正交设计优化了固化温度、聚硫橡胶的加入量、固化剂的加入量和石墨用量等参数。结果表明:固化温度、固化剂用量对环氧固化物的冲击强度、压缩强度和固化时间的影响十分显著,液态聚硫橡胶明显改善了环氧树脂快速模具材料的力学性能,而石墨对其影响较小。综合冲击性能、压缩性能和固化时间三项指标,确定了环氧树脂模具材料的最佳制备条件为:固化温度70℃,聚硫橡胶加入量25%,固化剂加入量100%,石墨加入量30%。 相似文献
10.
11.
12.
CA型环氧树脂固化剂性能研究 总被引:3,自引:0,他引:3
用IR光谱表征了自制CA型环氧树脂固化剂的结构特点,测定了CA型固化剂的固化特性,固化树脂的性能和增塑效果。实验结果表明,CA型固化剂能使环氧树脂涂料在潮湿表面和带油表面上固化成膜,其固化的树脂具有良好的耐蚀性,冲击强度较二乙撑三胺固化的树脂有较大提高,同时也是一种较好的环氧树脂用增塑剂。 相似文献
13.
环氧树脂是应用广泛的热塑性高分子预聚物,只有加入固化剂后方能显示出优异的性能,因此固化剂对于环氧树脂的应用及对固化产物的性能发挥着巨大的作用。在环氧树脂固化剂中,又以反应型固化剂的固化效果比较优异且使用方便,品种众多。综述了反应型环氧树脂的固化剂的种类及反应机理,介绍了近年来国内外几种性能优异的反应型环氧树脂固化剂,其中包括多元胺类固化剂、酸酐类固化剂、多元硫醇类固化剂、咪唑类固化剂等,指出其发展趋势是环保型、耐高温、高强度、高耐久性及快速固化。 相似文献
14.
本文介绍了常温固化的环氧灌封材料的主要性能指标,并通过对环氧树脂、增韧剂、固化剂的筛选,完成了一种粘度低、固化时间较短、操作时间较长、不开裂、韧性好、绝缘性好的灌封材料的研制工作。 相似文献
15.
《国际聚合物材料杂志》2012,61(7):520-531
A new curing agent based on palmitoleic acid methyl ester modified amine (PAMEA) for epoxy resin was synthesized and characterized. Diglycidyl ether of bisphenol A (DGEBA) epoxy resins cured with different content of PAMEA along with diethylenetriamine (DETA) were prepared. The mechanical properties, dynamic mechanical properties, thermal properties, and morphology were investigated. The results indicated that the PAMEA curing agent can improve the impact strength of the cured epoxy resins considerably in comparison with the DETA curing agent, while the modulus and strength of the cured resin can also be improved slightly. When the PAMEA/epoxy resin weight ratio is 30/100, the comprehensive mechanical properties of the cured epoxy resin are optimal; at the same time, the crosslinking density and glass transition temperature of the cured epoxy resin are maximal. 相似文献
16.
17.
To improve the disadvantage of the low reactivity and reduce the high curing temperature of epoxy resin cured by dicyandiamide (DICY), DICY is chemically modified with phenyl hydrazine and a new curing agent, LB‐A, is developed in this research. The structure, the curing behavior, and reaction kinetics of LB‐A curing epoxy resin are investigated. Results show that the DICY is modified successfully and the well‐defined structure of DICY is destroyed after modification. Consequently, a new curing agent in a noncrystal form is resulted. Thereupon, the reactivity and compatibility between the epoxy resin and the curing agent are improved appreciably using LB‐A instead of DICY. Meanwhile, the curing temperature and activation energy of the curing reaction decrease outstanding, whereas the rate constant increases remarkably. In addition, the compressive strength and the adhesive strength in shear by tension loading of the resulting epoxy resins have been increased using LB‐A instead of DICY as the curing agent. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013 相似文献
18.
新型环氧树脂增韧剂的合成与研究 总被引:8,自引:2,他引:8
以聚醚和酸酐反应,再与环氧树脂反应,合成了一种新型的以环氧基封端的内增韧活性增韧剂,讨论了该增韧剂的固化特性和最佳掺合比例,在100份环氧树脂中加入10份这种增韧剂,环氧树脂固化物综合力学性能较好,剪切强度为23.6MPa,压缩强度达70.2Mpa。 相似文献
19.
聚氨酯改性环氧胶粘剂的合成及性能研究 总被引:6,自引:0,他引:6
合成了具有反应活性的端环氧基聚氨酯,对其进行了初步的结构定性分析,并且研究了用端环氧基聚氨酯对环氧胶粘剂的改性,考查了端环氧基聚氨酯与环氧树脂的配比、填充料与树脂的配比、固化剂用量、固化温度等因素对胶粘剂强度的影响。该胶对黄铜粘接的剪切强度达30 MPa。 相似文献