Rhodium‐Catalysed Alkoxycarbonylative Cyclisation Reactions of 1,6‐Enynes

The rhodium‐catalysed carbonylation of 1,6‐enynes possessing an electron‐deficient alkenyl moiety in an alcohol reagent in the presence of a rhodium complex proceeded stereo‐ and chemoselectively to afford exocyclic α,β‐enoates.     

Catalytic synthesis of 1,6‐dicarbamate hexane over MgO/ZrO2

MgO/ZrO₂ catalyst was prepared for the synthesis of 1,6‐dicarbamate hexane (HDC) using dimethyl carbonate (DMC) and 1,6‐diamine hexane (HDA) as raw materials. When the catalyst is calcined at 600 °C and MgO load is 6 wt%, the catalyst exhibits better activity. When the concentration of catalyst is 2 g (100 mL)^?1 DMC, n(HDA):n(DMC) = 1:10, reaction time is 6 h under reflux temperature, and the yield of 1,6‐dicarbamate hexane is 53.1%. HDC yield decreases from 53.1% to 35.3% after MgO/ZrO₂ being used for three times. The decrease in specific surface area may be attributed to deactivation of MgO/ZrO₂. Copyright © 2007 Society of Chemical Industry     

Metallocene ethylene‐co‐(5,7‐dimethylocta‐1, 6‐diene) copolymers crosslinked using electron beam irradiation: a tunable alternative

Ethylene‐co‐(5,7‐dimethylocta‐1,6‐diene) copolymers with various 5,7‐dimethylocta‐1,6‐diene contents incorporate double bonds in the lateral chains that facilitate the development of crosslinkings in the resulting polymeric material after electron beam irradiation. As an effect of such irradiation, crystallization is delayed but crystallinity remains practically constant after melting and further cooling of irradiated specimens. Crystallinity, crystallite thickness and gel content are key parameters in the mechanical performance of these copolymers. Consequently, the controlled incorporation of non‐conjugated dienes into the polyethylene structure appears as an alternative strategy for tuning the mechanical response in crosslinked polyolefins. Moreover, the resulting materials exhibit good thermal stability. Copyright © 2011 Society of Chemical Industry     

Progress towards the Stereoselective Synthesis of 3,6‐Disubstituted 1,2‐Diamino‐4‐cyclohexenes by Ring Closing Metathesis Reaction

The ring closing metathesis of 4(R),5(R)‐bis[1(S)‐phenylethylamino]‐3,6‐diethenyl‐1,7‐octadiene required the preliminary formation of the cyclic formaldehyde aminal, then the use of the Grubbs' ruthenium benzylidene complex (10 mol %) in refluxing toluene in the presence of 2 equivalents of trifluoroacetic acid. The cyclic aminal was cleaved in situ after the cyclisation step, so that the final product was the 1,2‐diamino‐3,6‐diethenylcyclohex‐4‐ene derivative. The predominant C₁‐symmetric diastereomer was isolated with 48% yield.     

Spiro‐Pyrrolidine‐Catalyzed Asymmetric Conjugate Addition of Hydroxylamine to Enals and 2,4‐Dienals

A spiro‐pyrrolidine‐catalyzed tandem aza‐1,4‐addition/hemi‐acetalization reaction was developed with excellent enantioselectivity (12 examples of ≥99% ee), and several substrates proceeded with higher ee (up to 10% increase) compared with the literature data. Particularly, an interesting and unusual aza‐1,6‐/oxa‐1,4‐addition for some substrates was also observed.

     

Superbase‐Catalyzed [4+2] Cycloaddition of Acetylenes to 3,6‐Di(pyrrol‐2‐yl)‐1,2,4,5‐tetrazine: A Facile Synthesis of 3,6‐Di(pyrrol‐2‐yl)pyridazines

Acetylenes undergo the [4+2] cycloaddition to 3,6‐di(pyrrol‐2‐yl)‐1,2,4,5‐tetrazine in the potassium hydroxide/dimethyl sulfoxide or potassium tert‐butoxide/dimethyl sulfoxide systems (80 °C, 2.5–4 h) to afford (after extrusion of the nitrogen molecule from the intermediate) 3,6‐di(pyrrol‐2‐yl)pyridazines in up to 73% yield, while under non‐catalytic conditions this reaction does not take place. This unusual result substantially extends the scope of synthetic application and mechanistic diversity of the Diels–Alder reaction. The step‐wise mechanisms involving the formation of [OH/tetrazine]⁻ or [t‐BuO/tetrazine]⁻ anionic intermediate complexes or cycloaddition of tetrazine to the acetylide anion are considered.     

Segmented and nonsegmented polyurethanes: Polyaddition products of 4,4′‐bis(2‐hydroxyethoxy)diphenyl ether and 1,6‐hexanediisocyanate

New linear polyurethanes (PUs) derived from 4,4′‐bis(2‐hydroxyethoxy)diphenyl ether (4‐HEDE) and 1,6‐hexanediisocyanate (HDI) were synthesized by either melt or solution polymerization. We found that the properties of PUs obtained are dependent mainly on the kind of organic solvent, contribution of the catalyst, and concentration of the monomers used. Good results are obtained using aprotic solvent‐N,N‐dimethylformamide, ∼ 30 wt % concentration of monomers, dibutyltin dilaurate as a catalyst, and conducting the process at 90–100°C for 4 h. This article presents basic properties of the series of PUs obtained. Thermal properties of the polymers were investigated by means of thermal gravimetric analysis and differential scanning calorimetry. Molecular weight distribution was determined by gel permeation chromatography. Shore hardness and tensile test results are also presented. The structure of the resulting products was confirmed by elemental analysis, Fourier transform infrared spectroscopy and X‐ray diffractometry. We also present the properties of copolyurethanes type 4‐HEDE/HDI/1,6‐hexanediol or 4‐HEDE/HDI/polytetramethylene oxide containing variable amounts of 1,6‐hexanediol or polytetramethylene oxide (M _n ∼ 650) synthesized in the optimal conditions established earlier for PU 4‐HEDE/HDI. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 83–91, 1999     

Cyclization of 1,4‐Phenylenediacrylic Acid with Thionyl Chloride and Subsequent Suzuki–Miyaura Reactions Revisited. The Products are Benzo[1,2‐b;5,6‐b′]dithiophenes and not Benzo[1,2‐b;4,5‐b′]dithiophenes

The reaction of 1,4‐phenylenediacrylic acid with thionyl chloride was reinvestigated. In earlier reports [Liebigs Ann. Chem. 1980 , 1172; Heterocycles 1995 , 41, 2691; Adv. Synth. Catal. 2009 , 351, 2683] it was claimed that 3,7‐dichlorobenzo[1,2‐b;4,5‐b′]dithiophenes were formed in these reactions. Herein, we provide unambiguous evidence that the assignment of these structures is wrong and that, in contrast, 3,6‐dichlorobenzo[1,2‐b;5,6‐b′]dithiophenes are formed. As a consequence, the structures of these parent molecules and of numerous aryl‐substituted derivatives prepared by Pd‐catalyzed cross‐coupling reactions have to be revised. As many of these dithiophenes were reported to show interesting optical, thermal and electronic properties, the theoretical explanations for these properties have to be reconsidered in the light of the corrected structures reported herein. Our structural assignments are based on X‐ray crystal structure analyses of the parent molecules and on NMR spectroscopic studies of the first unsymmetrical derivatives. Besides, mechanistic investigations based on quantum chemical calculations have been carried out which support the formation of the 3,6‐dichlorobenzo[1,2‐b;5,6‐b′]dithiophene isomers.     

Polymerization of 4‐(4′‐N‐1,8‐naphthalimidophenyl)‐1,2,4‐triazolidine‐3,5‐dione with diisocyanates

4‐(4′‐Aminophenyl)‐1,2,4‐triazolidine‐3,5‐dione ( 1 ) was reacted with 1,8‐naphthalic anhydride ( 2 ) in a mixture of acetic acid and pyridine (3 : 2) under refluxing temperature and gave 4‐(4′‐N‐1,8‐naphthalimidophenyl)‐1,2,4‐triazolidine‐3,5‐dione ( NIPTD ) ( 3 ) in high yield and purity. The compound NIPTD was reacted with excess n‐propylisocyanate in N,N‐dimethylacetamide solution and gave 1‐(n‐propylamidocarbonyl)‐4‐[4′‐(1,8‐naphthalimidophenyl)]‐1,2,4‐triazolidine‐3,5‐dione ( 4 ) and 1,2‐bis(n‐propylamidocarbonyl)‐4‐[4′‐(1,8‐naphthalimidophenyl)]‐1,2,4‐ triazolidine‐3,5‐dione ( 5 ) as model compounds. Solution polycondensation reactions of monomer 3 with hexamethylene diisocyanate ( HMDI ), isophorone diisocyanate ( IPDI ), and tolylene‐2,4‐diisocyanate ( TDI ) were performed under microwave irradiation and conventional solution polymerization techniques in different solvents and in the presence of different catalysts, which led to the formation of novel aliphatic‐aromatic polyureas. The polycondensation proceeded rapidly, compared with conventional solution polycondensation, and was almost completed within 8 min. These novel polyureas have inherent viscosities in a range of 0.06–0.20 dL g^?1 in conc. H₂SO₄ or DMF at 25°C. Some structural characterization and physical properties of these novel polymers are reported. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2861–2869, 2003     

Asymmetric Organocatalytic Cascade Michael/Hemiketalization/Retro‐Aldol Reaction of 2‐[(E)‐2‐Nitrovinyl]phenols with 2,4‐Dioxo‐4‐arylbutanoates: A Convenient Access to Chiral α‐Keto Esters

An unprecedented organocatalytic enantioselective cascade Michael/hemiketalization/retro‐aldol reaction of 2‐[(E)‐2‐nitrovinyl]phenols and 2,4‐dioxo‐4‐arylbutanoates is described. With a bifunctional squaramide catalyst incorporating (1R,2R)‐1,2‐diphenylethane‐1,2‐diamine, the reactions afford products in 75–99% yields with 80–98% ee. This process provides an enantioselective pathway for the synthesis of chiral α‐keto esters, precursors of 3‐arylproline derivatives, δ‐amino α‐keto acids or cyclic α‐keto lactams.

     

New monomers and polymers derived from α‐hydroxymethyl methyl vinyl ketone

2‐Hydroxymethyl‐but‐1‐ene‐3‐one [α‐hydroxymethyl methyl vinyl ketone (HMVK)] was synthesized from methyl vinyl ketone using paraformaldehyde and a tertiary amine catalyst. Free‐radical polymerization of this monomer created transparent, tough polymers that were insoluble in organic solvents. HMVK was converted to trimethylsilyl, acetate, and chloride derivatives. When the hydroxyl group was thus protected or removed, all these monomers could be free radically polymerized in bulk to make soluble polymers. The chlorination reaction is complicated by the formation of 1,1‐bischloromethylacetone, which dehydrohalogenated unexpectedly to the desired α‐chloromethyl methyl vinyl ketone. HMVK will self‐condense to an ether dimer in the presence of a catalytic acid. This reagent is capable of crosslinking many alkene monomers through hydrolytically stable ether bonds. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 509–516, 2000     

Improved conversion of 6‐endo‐tosyloxybicyclo[2.2.2]octan‐2‐ones into 6‐exo‐acetoxy and 6‐exo‐benzoyloxybicyclo[2.2.2]octan‐2‐ones

The reaction conditions for the conversion of 6‐endo‐tosyloxybicyclo[2.2.2]octan‐2‐one ( 7b ) into 6‐exo‐acetoxy ( 8b ) and 6‐exo‐benzoyloxybicyclo[2.2.2]octan‐2‐one ( 8a ), respectively, were improved. Thus known 6‐endo‐tosyloxy‐bicyclo[2.2.2]octan‐2‐ones (+)‐(1RS,6SR,8SR,11RS)‐11‐[(4‐toluenesulfonyl)oxy]tricyclo[6.2.2.0^1,6]dodecan‐9‐one ( 1a ), 13‐methyl‐15‐oxo‐9β,13b‐ethano‐9β‐podocarpan‐12β‐yl‐4‐toluenesulfonate ( 3a ), and methyl (13R)‐16‐oxo‐13‐[(4‐tolylsulfonyl)oxy]‐17‐noratisan‐18‐oate ( 5 ), were converted,in comparable yields, as previously recorded, but much shorter times, into (+)‐(1RS,6SR,8SR,11SR)‐11‐(benzoyloxy) tricyclo[6.2.2.0^1,6]dodecan‐9‐one ( 2 ), 13‐methyl‐15‐oxo‐9β,13β‐ethano‐9β‐podocarpan‐12α‐yl benzoate ( 4 ), and methyl (13S)‐13‐(benzoyloxy)‐16‐oxo‐17‐noratisan‐18‐oate ( 6 ), respectively.     

Synthesis and biological activity of medium molecular weight polymers containing 3,6‐endo‐methylene‐1,2,3,6‐tetrahydrophthalimidobutanoyl‐5‐fluorouracil

A new monomer, 3,6‐endo‐methylene‐1,2,3,6‐tetrahydrophthalimidobutanoyl‐5‐fluorouracil (ETBFU), was synthesized by reaction of 3,6‐endo‐methylene‐1,2,3,6‐tetrahydrophthalimidobutanoyl chloride and 5‐fluorouracil. The homopolymer of ETBFU and its copolymers with acrylic acid (AA) or vinyl acetate (VAc) were prepared by photopolymerization using 2,2‐dimethoxy‐2‐phenylacetophenone as an initiator at 25 °C. The synthesized ETBFU and its polymers were identified by FTIR, ¹H NMR and ¹³C NMR spectroscopies. The ETBFU content in poly(ETBFU‐co‐AA) and poly(ETBFU‐co‐VAc) was 43 and 14 mol%, respectively. The apparent number‐average molecular weight (M_n) of the polymers determined by GPC ranged from 8400 to 11 300. The in vitro cytotoxicity of the samples against mouse mammary carcinoma (FM3A), mouse leukaemia (P388), and human histiocytic lymphoma (U937) cancer cell lines decreased in the order 5‐FU ≥ ETBFU > poly(ETBFU) > poly(ETBFU‐co‐AA) > poly(ETBFU‐co‐VAc). The in vivo antitumour activity of the polymers against Balb/C mice bearing sarcoma 180 tumour cells was greater than that of 5‐fluorouracil at all doses tested. © 2000 Society of Chemical Industry     

Cyclometalated N‐Heterocyclic Carbene‐Platinum Catalysts for the Enantioselective Cycloisomerization of Nitrogen‐Tethered 1,6‐Enynes

Platinum(II) complexes which combine six‐membered N‐heterocyclic carbene‐containing metallacyclic units and monodentate chiral phosphines have been prepared. The key step of their synthesis is the intramolecular oxidative addition of N‐2‐iodobenzylimidazolylidene‐platinum(0)‐diene complexes in the presence of the chiral phosphorus ligands. The platinum(II) metallacycles have been used as well‐defined pre‐catalysts for the enantioselective cycloisomerization of nitrogen‐tethered 1,6‐enynes into 3‐azabicyclo[4.1.0]hept‐4‐enes. High enantiomeric excesses have been obtained with either Monophos or phenyl‐Binepine based catalysts (ees=82–96%), although phenyl‐Binepine outperforms Monophos in these reactions. The absolute configuration of the final 3‐azabicyclo[4.1.0.]heptenes has been established by X‐ray diffraction studies. The method has been extended then to the cycloisomerization of dienynes with enantiotopic vinyl groups. An (S)‐phenyl‐Binepine‐platinum(II) complex allows total diastereoselectivity and high enantioselectivity levels to be attained in these reactions (ees up to 95%) which represent the first enantioselective desymetrizations achieved via enyne cycloisomerizations.     

Kinetic analysis of the swelling behavior of poly(n‐butylacrylate‐1,6‐hexanedioldiacrylate) networks in 4‐cyano‐4′‐n‐pentyl‐biphenyl (5CB)

The dynamic swelling behavior of chemically crosslinked poly(n‐butylacrylate/1,6‐hexanedioldiacrylate) [poly(Abu‐HDDA)] networks, immersed in an nematogenic and two isotropic solvents, was experimentally analyzed. These networks were elaborated by ultraviolet (UV)–visible light‐induced radical polymerization/crosslinking reactions of Abu/HDDA mixtures, to yield poly(Abu/0.5 wt % HDDA) and poly(Abu/5 wt % HDDA) networks corresponding to weakly and strongly crosslinked systems, respectively. The swelling behavior of these poly(Abu‐HDDA) networks was investigated by immersion in excess solvent, followed by subsequent measurements of the variation of the sample size by means of optical microscopy, depending on temperature and immersion time. Methanol and toluene were employed as isotropic solvents and the nematic liquid crystal molecule 4‐cyano‐4 ′ ‐n‐pentyl‐biphenyl, was considered as anisotropic medium. Swelling ratios were calculated by taking into account diameter sizes as function of immersion time compared to the dry state. Experimental data were analyzed using the Komori–Sakamoto approach and the results of this model were found to be in good agreement with the obtained data. The plateau values of the swelling curves at equilibrium were used to establish phase diagrams as function of temperature and solvent concentration. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45452.     

Rhodium‐Catalyzed Asymmetric Cycloisomerization of 1,6‐Ene‐ynamides

The rhodium‐catalyzed asymmetric cycloisomerization of heteroatom‐bridged 1,6‐ene‐ynamides proceeded to give high yields of functionalized 3‐aza‐ and oxabicyclo[4.1.0]heptene derivatives with high enantioselectivity, which was achieved by use of a rhodium/chiral diene catalyst. The 1,6‐ene‐ynamides substituted with 2‐oxazolidinone and 2‐azetidinone moieties at the alkyne terminus were found to display high reactivity towards the rhodium/chiral diene catalyst, where the chelate coordination of the alkyne moiety and the carbonyl oxygen of the ene‐ynamides might be responsible for the high catalytic activity.     

Synthesis and characterization of photoluminescent conjugated polymer containing N‐(α‐naphthyl)‐carbazole unit

A novel luminescent conjugated polymer, poly[{9‐(α‐naphthyl)‐3,6‐divinylenecarbazolylene}‐alt‐co‐(1,4‐phenylene)] (PNVCP), bearing alternated 9‐(α‐naphthyl)‐carbazole and benzene units, was synthesized via a Wittig–Horner reaction. The solubility, thermal, and optical properties were investigated. It was soluble in common organic solvents, such as tetrahydrofuran and 1,2‐dichlororoethane. Thermogravimetric analysis and differential scanning calorimetry showed that the conjugated polymer exhibited good thermal stability up to 496°C with a glass‐transition temperature higher than 110°C. The photoluminescence properties were studied. The polymer emits blue light and the quantum yield is 93% in solution. The emission spectra exhibited an obvious solvent effect. With the increase of the polarity of the solvents, the fluorescence spectra changed obviously and appeared to be redshifted at room temperature. The redshift was more obvious in aromatic solvents than in aliphatic solvents. When N,N‐dimethylaniline was gradually added into the solution of the conjugated polymer, the emission intensity of the fluorescence decreased. In comparison, the emission intensity of the polymer showed invariability when 1,4‐dicyanobenzene was added into the polymer solution. Moreover, the fluorescence of the polymer could be effectively quenched by fullerene. Overall, the synthesized polymer is a potential candidate material for fabrication of polymeric light‐emitting devices. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 923–927, 2006     

Intramolecular Photochemical Cross‐Coupling Reactions of 3‐Acyl‐2‐haloindoles and 2‐Chloropyrrole‐3‐carbaldehydes with Substituted Benzenes

Highly efficient syntheses of indolo[2,1‐a]isoquinolines, indolo[2,1‐a][2]benzazepines, pyrrolo[2,1‐a]isoquinolines and pyrrolo[1,2‐a]benzazepines in excellent yields have been achieved by the intramolecular photochemical cross‐coupling reactions of 3‐acyl‐2‐halo‐N‐(ω‐arylalkyl)indoles and 2‐chloro‐N‐(ω‐arylalkyl)pyrrole‐3‐carbaldehydes in acetone. A new heterocyclic ring system – pyrrolo[1,2‐d][1,4]benzoxazepine – has also been constructed for the first time in this work by the photocyclization of 2‐chloro‐N‐(2‐phenoxyethyl)pyrrole‐3‐carbaldehyde.     

Synthesis and characterization of multi‐block copolymers containing poly [(3‐hydroxybutyrate)‐co‐(3‐hydroxyvalerate)] and poly(ethylene glycol)

Various problems, including high crystallinity, high melting temperature, poor thermal stability, hydrophobicity and brittleness, have impeded many practical applications of poly[(3‐hydroxybutyrate)‐co‐(3‐hydroxyvalerate)] (PHBV) as an environmentally friendly material and biomedical material. In the work reported here, multi‐block copolymers containing PHBV and poly(ethylene glycol) (PHBV‐b‐PEG) were synthesized with telechelic hydroxylated PHBV as a hard and hydrophobic segment, PEG as a soft and hydrophilic segment and 1,6‐hexamethylene diisocyanate as a coupling reagent to solve the problems mentioned above. PHBV and PEG blocks in PHBV‐b‐PEG formed separate crystalline phases with lower crystallinity levels and lower melting temperatures than those of phases formed in the precursors. The crystallite dimensions of the two blocks in PHBV‐b‐PEG were smaller than those of the corresponding precursors. Compared to values for the original PHBV, the maximum decomposition temperature of the PHBV block in PHBV‐b‐PEG was 16.0 °C higher and the water contact angle was 9° lower. In addition, the elongation at break was 2.8% for a pure PHBV fiber but 20.9% for a PHBV/PHBV‐b‐PEG fiber with a PHBV‐b‐PEG content of 30%. PHBV‐b‐PEGs can overcome some of the disadvantages of pure PHBV; it is possible that PHBV might be a good candidate for the formulation of environmentally friendly materials and biomedical materials. Copyright © 2010 Society of Chemical Industry     

[2+2+2]‐Cyclotrimerization of 1‐Cyclopropyl‐1,6‐diynes with Alkynes: Formation of Cyclopropylarenes.

Cyclotrimerization of 1‐cyclopropyl‐1,6‐diynes with various terminal alkynes was tested under catalytic conditions using rhodium and ruthenium catalysts. We observed that the regioselectivity of the reaction, that is, formation of 1,2‐ or 1,3‐regioisomers, was opposite for the two metals. For the ruthenium complex [Cp*Ru(cod)Cl]‐catalyzed reactions the yields were in many cases high with a strong preference for the formation of 1,3‐substituted regioisomers. In the case of catalysis by the rhodium complex [RhCl(PPh₃)₃], 1,2‐substituted products were generally preferred, albeit the selectivity was often modest. However, by changing the ligand environment around the central rhodium atom the regioselectivity as well as yields of the products were significantly improved. For example, by using a combination of the rhodium complex [Rh(cod)₂BF₄] and 1,4‐bis(diphenylphosphino)butane the regioselectivity was changed from 1:1 to 1:12 in favor of the 1,2‐regioisomer. This catalytic system was also applied for synthesis of a substituted 4‐cyclopropyl‐3‐hydroisobenzofuran‐1‐one that could serve as a potential intermediate for preparation of antihypertensive agents.