首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 234 毫秒
1.
从今年开始,我们国家即拉开了第十一个五年科学发展的大幕。总结好“十五”,规划好“十一五”,是这次理事会的主要任务。为此,1月份秘书长会、3月中旬召开的主席团会,都做了专题研究,目的就是通过协会,发动全行业,群策群力,振奋精神,按照中共十六届五次会议、十届人大四次会议制定的方针、路线和规划,扎扎实实地推进橡胶工业科学发展。一、“十五”回顾2001年 ̄2005年,国家实施了第十个五年发展规划。这5年对橡胶行业来讲,经历了崭新的、也是更为现实而又严厉的磨砺,这5年绝非寻常。1999、2000两年,全行业整体亏损;入世后面临挑战和国际贸易…  相似文献   

2.
中国橡胶工业"十一五"科学发展规划意见   总被引:1,自引:0,他引:1  
国家从2006~2010年实施第十一个五年发展规划。中共中央十六届五次会议发布了《中共中央关于制定国民经济和社会发展第十一个五年规划的建议》,十届四次人大会议发布了《国民经济和社会发展第十一个五年规划纲要》。为了促进橡胶工业“十一五”期间科学发展,中国橡胶工业协会技术经济委员会组织100多名业内专家,历时一年多,编制了《中国橡胶工业发展战略研究》。在此基础上,各分会也都分别提出了本专业的规划意见。制订橡胶工业“十一五”科学发展规划,既是全行业贯彻落实国家“十一五”规划纲要的基础,指导企业发展,也是为各级政府主管部…  相似文献   

3.
《中国橡胶》2007,23(1):6-6
一、中国橡胶工业协会六届三次理事会讨论通过并发布《中国橡胶工业“十一五”科学发展规划意见》及橡胶行业“十一五”实施名牌战略规划意见。这是首次由协会组织制订的行业规划。规划表明橡胶工业“十一五”期间要走自主创新之路,全行业要切实转入科学发展的轨道,使中国成为世界橡胶工业强国。  相似文献   

4.
陈志宏 《中国橡胶》2006,22(11):3-7
中国橡胶工业协会六届三次理事会审议通过的《中国橡胶工业“十一五”科学发展规划意见》和《橡胶工业“十一五”实施名牌战略规划意见》,进一步明确了“十一五”其间橡胶工业坚持自主创新,全面推进产品升级换代的鲜明主题。为贯彻落实好这两个规划意见,本刊特别开设“橡胶工业自主创新和名牌战略论坛”专栏,总结推广先进企业实施科学发展,循环经济和名牌战略的经验和好的做法,请行业专家和企业领导就自主创新和实施名牌战略建言献策,以期对全行业“十一五”科学发展有所引导,借鉴和启迪。  相似文献   

5.
《中国橡胶》2002,18(12):8-9,11
应广大读者的要求,本刊将陆续摘要刊登橡胶工业“十五”规划中的有关内容,主要包括5个方面:●橡胶工业现状(一)●世界橡胶工业发展和国内相关工业发展对我国橡胶工业的影响(二)●橡胶工业“十五”市场需求预测(三)●橡胶工业“十五”发展重点和方向(四)●2005年橡胶工业规划目标(五)  相似文献   

6.
《中国橡胶》2002,18(13):5-6,32
编者按:应广大读者的要求,本刊将陆续摘要刊登橡胶工业“十五”规划中的有关内容,主要包括5个方面:●橡胶工业现状(一)●世界橡胶工业发展和国内相关工业发展对我国橡胶工业的影响(二)●橡胶工业“十五”市场需求预测(三)●橡胶工业“十五”发展重点和方向(四)●2005年橡胶工业规划目标(五)  相似文献   

7.
1 磷复肥工业“十二·五”发展规划 中国磷肥工业协会拟定了我国磷复肥工业“十二·五”发展规划,其要点如下。  相似文献   

8.
2007年,橡胶全行业坚持自主创新、调整优化产品结构、加强自律、规避风险;积极面对国家有关经济政策调整,消化其不利因素;积极应对国际贸易争端,更加科学、有效地走向国际市场,从而实现了增产增收,迈出了“十一五”期间又好又快发展的新步伐。  相似文献   

9.
肖西 《中国橡胶》2006,22(9):8-8
中国橡胶工业协会六届三次理事会议暨橡胶工业自主创新和名牌战略论坛会4月20日至22日在浙江杭州召开。这次会议的主要议题是按照两会精神,讨论和印发“橡胶工业‘十一五’科学发展规划意见”,促进橡胶工业科学发展。会议听取了中国橡胶工业协会会长鞠洪振关于十五”情况总结、“十一五”科学发展指导思想、发展目标及协会主要工作措施的主题报告;听取了秘书长范仁德关于2005年工作总结和2006年工作安排意见等有关情况的汇报。通报了关于评选橡胶行业优秀科技创新带头人、优秀工程师、优秀操作工的安排和关于“复合橡胶自律规范”制定以及促…  相似文献   

10.
《中国橡胶》2002,18(15):5-6,23
应广大读者的要求,本刊将陆续摘要刊登橡胶工业“十五”规划中的有关内容,主要包括5个方面:●橡胶工业现状(一)●世界橡胶工业发展和国内相关工业发展对我国橡胶工业的影响(二)●橡胶工业“十五”市场需求预测(三)●橡胶工业“十五”发展重点和方向(四)●2005年橡胶工业规划目标(五)  相似文献   

11.
1 买方市场是赊销现象的主要社会经济原因我国从经济转型过程中,社会生产力迅速发展,许多商品从供不应求转变为供大于求。在供大于求的现实情况下,竞争的压力往往迫使许多企业会采用各种促销手段,向买方提供优惠的交易条件,以求开拓市场,增加销售收入。赊销就是行之有效的促销手段。  相似文献   

12.
通过批试验,对砂岩对浸出铀的吸附解吸做了研究,研究了不同pH、不同液固比条件下,砂岩对浸出铀的吸附和解吸效果。结果表明,pH在1.5~2.0范围内,吸附量与pH成正相关,解吸量与p H成负相关;液固比2∶1和5∶1两种条件下,液固比越大,吸附量和解吸量都增大。  相似文献   

13.
14.
The influence of the end groups of two liquid rubbers on curing kinetics, morphology, and hardness behavior of diglycidyl ether of bisphenol-A based epoxy resin (DGEBA) has been studied. The rubbers are silyl-dihydroxy terminated (PDMS-co-DPS-OH) and silyl-diglycidyl ether terminated (PDMS-DGE). Crosslinking reactions, investigated by shear rheometry, ranged 90–110 °C, using a constant concentration (5 phr) of liquid rubbers and 1,2-Diamino cyclohexane (1,2-DCH) as hardener agent. The gel time, t gel, of the neat epoxy significantly decreased when adding the elastomers, more so for the silyl-dihydroxy terminated elastomer; at 110 °C the reaction was nearly complete before rheological test started. The results suggest that the elastomers induced a catalytic effect on the curing reaction. Scanning electron microscopy revealed phase separation of the elastomer during the curing reaction with rubber domains about 5 μm size. However, the DGEBA/dihydroxy terminated elastomer composite cured at 110 °C exhibited a homogenous morphology, that is, the rapid reaction time would not allow for phase separation. Water contact angle tests evidenced either more hydrophilic (silyl-diglycidyl ether terminated rubber) or more hydrophobic (silyl-dihydroxy terminated rubber) behavior than the neat epoxy. The latter effect is attributed to the presence of aromatic rings in the backbone structure of PDMS-co-DPS-OH. Microindentation measurements show that the elastomers significantly reduced the hardness of the epoxy resin, the DGEBA/ether terminated composite exhibiting the lowest hardness values. Moreover, hardness increased as reaction temperature did, correlating with a reduction of microdomains size thus enabling the tuning of mechanical properties with reaction temperature.  相似文献   

15.
以硝酸锌和氢氧化钠为主要原料,研究了120℃和180℃水热条件下,OH^-与Zn^2+物质的量比为8时,不同添加剂D-山梨醇、十六烷基三甲基溴化铵、十二烷基三甲基溴化铵对所得氧化锌形貌的影响。通过扫描电镜(SEM)观察,所有产品都表现为由棒状氧化锌组成的向外辐射的球状体。120℃时,所得氧化锌棒的直径大小较为均一,其中不加添加剂和添加D-山梨醇时所得捧状氧化锌末端为锥形,添加十二烷基三甲基溴化铵的氧化锌末端为针形,而添加十六烷基三甲基溴化铵的氧化锌长径比更大,直径也更为细小;180℃时,只有添加十六烷基三甲基溴化铵所得氧化锌较为均一,其它3种情况下所得氧化锌都表现为大小不等的球体。  相似文献   

16.
Translated from Steklo i Keramika, No. 5, pp. 15–16, May, 1988.  相似文献   

17.
Conclusions An increase to 4.5–5.5% in the concentration of anion vacancies in the lattice facilitates the transport processes in solid solutions. With a significant concentration of anion vacancies this process becomes difficult, as is indicated by the increase in the activation energy of conductivity.The stabilization of ZrO2 by oxides with a larger cation radius leads to a reduction in the level of conductivity of the solid solutions.The addition to the ZrO2 lattice of cations of stabilizing oxides with a charge close to that of Zr4+ facilitates the transport process of the oxygen ions.It is shown that, in principle, it is possible to predict the level of conductivity of solid solutions based on ZrO2 at 1200–1400°C.The use of a combined additive consisting of a mixture of rare-earth oxides to stabilize ZrO2 makes it possible to obtain solid electrolytes close in their electrophysical properties to the ZrO2-Sc2O3 electrolytes.Translated from Ogneupory, No. 4, pp. 15–18, April, 1985.  相似文献   

18.
《化工设计通讯》2017,(10):161-162
石化工业是中国整个经济领域中必不可少的一个部分,在国民经济领域占据着举足轻重的地位,其作为中国能源、原材料以及相关产品的主要来源方式,已经成为中国经济发展和人民日常生活维持必不可少的关键。近几年来,中国在石油和化工领域的进步有目共睹,整体的发展进程日益加快。通过对中国在石化发展的每个阶段进行分析不难看出,现今社会中国的进步可谓是前所未有的,已经达到了预期的成果。基于此,主要讲述了中国石化业现今的状况,并且针对近几年常见的问题进行了分析和研究,并提出了发展建议。  相似文献   

19.
This study explores the photoelasticimetry as a means to investigate factors affecting the residual stresses, particularly the thermal stresses, in polymethyl methacrylate (PMMA). The aim was to study the effect of quenching temperature in three different media: air, water, and ethylene glycol, on the impact strength and thermal properties of PMMA. These temperatures varied from a fixed value of 120°C to various values below Tg and the fields of distribution of cooling stresses have been obtained using a charge-coupled device (CCD) camera. It was observed that the quenching in water at 20°C gives rise to an important density of tensile stresses. However, in the ethylene glycol at 110°C this density has a tendency to disappear. An approximate evaluation of these stresses in a point near the specimen center has been assessed, and it was found that the distribution profile of the fields of tensile stresses was much closer to a parabolic form. Notched Izod impact strength and heat deflection temperature (HDT) were measured, and were found to be particularly sensitive to thermal stresses.  相似文献   

20.
朱君君  李绪丰 《广东化工》2012,(12):139-140,142
锅炉运行过程中普遍存在结垢现象,不仅耗能严重,而且严重危害锅炉的安全运行。文章分析了结垢的机理及其对能效的影响、超声波防除垢的作用机理,为超声波防垢技术更好地发挥作用提供了一定的理论依据与技术支持。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号