共查询到20条相似文献,搜索用时 93 毫秒
1.
2.
3.
4.
分析了铁道车辆空气弹簧橡胶囊囊体鼓泡脱层、表面缺胶和子口附近重皮裂口、子口缺胶、囊里窝气、囊里露线和囊体帘线弯曲的产生原因,并提出了相应的解决措施:严格控制半成品部件尺寸;确定合理的帘线假定伸张值、机头宽度和机头直径;合理设计排气孔和排气线;定期检查和更换水胎或硫化隔膜等。 相似文献
5.
6.
7.
8.
9.
10.
针对反弧形低断面轮胎在硫化过程中易产生胎肩脱层、鼓泡,在使用过程中存在使用寿命偏低等问题,从轮胎断面形状、胎体受力分析、胶囊设计和轮胎硫化工艺等方面进行分析并提出了相应的解决措施.采取在模型和胶囊上增加排气线的措施,对解决反弧形低断面轮胎胎肩质量问题有明显效果. 相似文献
11.
苯乙烯是重要的石油化工原料。本文介绍了国内外苯乙烯生产的发展概况,合成乙苯,苯乙烯所用的催化剂种类,并就苯乙烯生产及催化剂的发展趋势提出了自己的观点。 相似文献
12.
Synthesis and characterization of homopolymers and copolymers of various acrylates and acrylonitrile
Various homopolymers and copolymers of methyl acrylate, ethyl acrylate, butyl acrylate, and acrylonitrile in different feed ratios were synthesized. These were characterized by IR, 13C-NMR, DSC, DTA, and TGA. Spectroscopic characterization helped in differentiating copolymers of different mol ratios. Thermal analysis revealed different degradation patterns for homopolymers and copolymers. The temperature and energy changes associated with various phase transitions were dependent on the chemical composition of homo- and copolymers, as expected. © 1993 John Wiley & Sons, Inc. 相似文献
13.
G. R. Hamed 《The Journal of Adhesion》1983,16(1):31-39
A substantially greater detachment energy is required to strip a polyethylene tereph-thalate (Mylar) film from a styrene-butadiene-styrene (SBS) triblock copolymer compared to that for peeling from a random styrene-butadiene (SBR) copolymer. This is true even though the intrinsic interaction between the Mylar and each elastomer is expected to be similar because of their virtually identical chemical composition. It is proposed that this difference in peel strength (between the SBS and SBR) is a consequence of the much higher dissipative capacity of the former elastomer. Another manifestation of this is the higher cohesive tear strength of the SBS compared to the SBR. Extents of energy dissipation within each elastomer during detachment of the Mylar adherend are consistent with the hypothesis that the average maximum stress experience before detachment is some similar fraction of each elastomer's tensile strength. 相似文献
14.
15.
16.
Polypentafluorostyrene (PPFS), polymethylacrylate (PMA), and poly(pentafluorostyrene-co-methylacrylate), poly(PFS-co-MA) were prepared and the wetting characteristics of polymer blends of PPFS and PMA were compared with that of poly(PFS-co-MA) via contact angle measurements. The critical surface tension of polypentafluorostyrene was found to be 22.6 dyne/cm, which is comparable to the value reported for polytrifluoroethylene (22 dyne/cm). The critical surface tension of poly(PFS-co-MA) is not linearly related to its composition. The polymer blends of PPFS and PMA exhibit significant surface enrichment of the fluoropolymer. The harmonic-mean method1 was employed to determine surface tensions of these polymers and many known polymers. It is found that the method produces useful surface tension data provided the contact angle values are derived from testing liquids of dissimilar polarity. 相似文献
17.
18.
19.
20.
责任是人应主动承担的角色义务和对其因过失所造成后果应承担的责罚.有两层涵义:一是义务;二是后果.责任心是个体自觉做好分内事务和履行道德义务的心理倾向,是个性心理品质成分中自我特征维度上的重要内容.责任心具有两个方面的涵义:一是角色分内职责;二是角色道德义务.责任心是一种通过责任认知、责任个性和责任适应的动态形式表现出来的静态品质,责任心是责任心过程结构与责任心关系结构相互制约、相互影响的统一体. 相似文献