Synthesis of amphiphilic triblock copolymers and application for morphology control of calcium carbonate crystals

A series of amphiphilic triblock copolymers poly(ethylene glycol)-block-poly(acrylic acid)-block-poly(n-butyl acrylate) (PEG-b-PAA-b-PnBA) differing only in the relative block lengths were synthesized by the acid-catalyzed elimination of the tert-butyl groups from poly(ethylene glycol)-block-poly(tert-butyl acrylate)-block-poly(n-butyl acrylate) (PEG-b-PtBA-b-PnBA), which was synthesized by atom-transfer radical polymerization (ATRP). The degree of polymerization, molecular weight and percentage of hydrolysis of the product PEG-b-PAA-b-PnBA were studied by gel permeation chromatography (GPC), NMR and matrix-assisted laser desorption/ionization time-of-flight mass spectroscopy (MALDI-TOF-MS). Dynamic light scattering (DLS) and transmission electron microscopy (TEM) were used to study the aggregation states of copolymers in water solution. The radii of the copolymer micelles shrink as Ca²⁺ is introduced into the solutions. The crystallization behaviors of calcium carbonate controlled by copolymer 1 (PEG₁₁₂-b-PAA₈₆-b-PnBA₆₀) and copolymer 2 (PEG₁₁₂-b-PAA₄₀-b-PnBA₇₂) differing mainly in the length of PAA block were systematically studied. It was found that the crystallization products are composed of calcite and vaterite, and the ratio of vaterite to calcite increases with increasing the concentration of copolymer 1. For copolymer 2, however, only calcite is obtained at all the concentration range investigated in this work.     

Synthesis of poly(ethylene glycol)-<Emphasis Type="Italic">b</Emphasis>-poly(mercapto ethylacrylamide) diblock copolymer via atom transfer radical polymerization

Atom transfer radical polymerization was used to synthesize a well-defined poly(ethylene glycol)-b-poly(mercapto ethylacrylamide) (PEG-b-PMEAAm) diblock copolymer. Poly(ethylene glycol)-b-poly[N-(acryloxysuccinimide)](PEG-b-PNAS) was synthesized at 80 °C using methoxy-poly(ethylene glycol)-2-bromo propanoate (PEG-Br) and CuBr/2,2′-bipyridine as a macroinitiator and catalyst, respectively. The monomer conversion was determined by ¹H nuclear magnetic resonance (NMR) spectroscopy. The resulting PEG-b-PNAS diblock copolymer was characterized by gel permeation chromatography, Fourier transform infrared (FT-IR), and ¹H NMR spectroscopy. Disulfide groups were introduced by a simple reaction through the N-acryloxysuccinimide (NAS) moieties of the PEG-b-PNAS diblock copolymer with cystamine dihydrochloride in the presence of triethylamine. FT-IR spectroscopy was used to confirm the introduction of disulfide moieties into the polymer repeating units. Subsequently, a thiol-functionalized block copolymer was prepared using DL-dithiothreitol (DTT) as the reducing agent and the reduction step was monitored by ¹H NMR spectroscopy. This thiol group was transformed easily to a disulfide bond using FeCl₃ as an oxidizing agent. The transformation into disulfide could be visualized easily as insoluble polymeric particles formed from a clear solution of PEG-b-PMEAAm after oxidation.     

Synthesis and characterization of poly(ethylene glycol)-b-poly (l-lactide)-b-poly(l-glutamic acid) triblock copolymer

A biodegradable amphiphilic triblock copolymer of poly(ethylene glycol)-b-poly(l-lactide)-b-poly(l-glutamic acid) (PEG-b-PLLA-b-PLGA) was obtained by catalytic hydrogenation of poly(ethylene glycol)-b-poly(l-lactide)-b-poly(γ-benzyl-l-glutamic acid) (PEG-b-PLLA-b-PBLGA) synthesized by the ring-opening polymerization (ROP) of N-carboxyanhydride of γ-benzyl-l-glutamate (BLG-NCA) with amino-terminated MPEG-b-PLLA-NH₂ as a macroinitiator. MPEG-b-PLLA-NH₂ converted from MPEG-b-PLLA-OH first reacted with tert-Butoxycarbonyl-l-phenylalanine (Phe-^NBOC) and dicyclohexylcarbodiimide (DCC) and then deprotected the tert-butoxycarbonyl group. MPEG-b-PLLA-OH was prepared by ROP of l-lactide with monomethoxy poly(ethylene glycol) in the presence of stannous octoate. The triblock copolymer and its diblock precursors were characterized by ¹H NMR, FTIR, GPC and DSA (drop shape analysis) measurements. The lengths of each block polymers could be tailored by molecular design and the ratios of feeding monomers. The triblock polymer PEG-b-PLLA-b-PLGA containing carboxyl groups showed obviously improved hydrophilic properties and could be a good potential candidate as a drug delivery carrier.     

Synthesis of novel temperature responsive PEG-b-[PCL-g-P(MEO2MA-co-OEGMA)]-b-PEG (tBG) triblock-graft copolymers and preparation of tBG/graphene oxide composite hydrogels via click chemistry

Novel triblock-graft copolymers, poly ethylene glycol-b-[poly(ε-caprolactone)-g-poly(2-(2-methoxyethoxy) ethyl methacrylate-co-oligo (ethylene glycol) methacrylate)]-b-poly ethylene glycol (PEG-b-[PCL-g-P(MEO₂MA-co-OEGMA)]-b-PEG) (tBG), were synthesized via ring-opening polymerization (ROP) and atom transfer radical polymerization (ATRP). In the synthesis process, temperature responsive P(MEO₂MA-co-OEGMA) chains were grafted onto the PCL block of triblock copolymer PEG-b-PCL-b-PEG to improve its hydrophilicity. This method succeeded in increasing the solubility of PEG-b-PCL-b-PEG in water, and more importantly, endowing PEG-b-PCL-b-PEG with temperature sensitivity. By adjusting the feed ratio of 2-(2-methoxy ethoxy) ethyl methacrylate (MEO₂MA) and oligo (ethylene glycol) methacrylate (OEGMA) monomers, the lower critical solution temperature (LCST) of the tBG can be realized at about 37 °C. Taking advantage of the excellent mechanical property of graphene sheets, alkyne-functionalized graphene oxide (alkyne-GO) was introduced to cross-link tBGs and prepare tBG/GO composite hydrogel through click reaction between tBG-N₃ and alkyne-GO. Different from traditional cross-linkers, alkyne-GO acts as reinforcing filler in the composite hydrogel. Benefiting from superior properties of PCL, PEG, P(MEO₂MA-co-OEGMA) and GO, the as-prepared temperature responsive tBG/GO hydrogel exhibits excellent mechanical strength and toughness, demonstrating future potential applications in tissue engineering and biotechnology fields.     

Effects of templating surfactant concentrations on the mesostructure of ordered mesoporous anatase TiO2 by an evaporation-induced self-assembly method

We prepared ordered hexagonal mesoporous TiO₂ by an evaporation-induced self-assembly (EISA) method using Pluronic P123 and tetrabutyl orthotitanate (Ti(OBuⁿ)₄, TBOT) as the templating agent and the titanium source, respectively. The main purpose of this study was to elucidate the effects of surfactant concentrations on the pore arrangement, pore size, specific surface area and structure of mesoporous TiO₂ by the EISA method. The mesostructures of mesoporous TiO₂ were characterized with X-ray diffraction (XRD), nitrogen adsorption/desorption isotherms, and transmission electron microscopy (TEM). By varying the concentration of the block copolymer, mesoporous TiO₂ of various pore sizes and pore ordering were prepared. Because the mesostructure is governed by the concentration of P123 surfactant at gelation of the solution, a higher P123/TBOT mole ratio favored the formation of highly ordered mesoporous TiO₂ with a maximum pore volume of 0.26 cm³/g, a high specific surface area of 244 m²/g, and a BJH average pore size of 4.7 nm.     

Preparation of core cross-linked micelles using a photo-cross-linking agent

A new method for preparing polymeric, core cross-linked (CCL) micelles has been developed using a bifunctional photo-cross-linking agent of di(4-hydroxyl benzophenone) dodecanedioate (BPD). An amphiphilic diblock copolymer of poly(ethylene glycol)-b-poly(2-hydroxyethyl methacrylate-co-methyl methacrylate) (PEG-b-P(HEMA-co-MMA)) was synthesized via atom-transfer radical polymerization (ATRP) using a PEG macroinitiator at 85 °C. The core domains of the PEG-b-P(HEMA-co-MMA) micelles containing BPD in aqueous solution were successfully photo-cross-linked by UV irradiation for only 30 min. The HEMA units incorporated in the hydrophobic block of PEG-b-P(HEMA-co-MMA) donated labile hydrogens to excited-state BP groups in BPD, and they were subsequently cross-linked by BPD through radical-radical combination. A sufficient degree of cross-linking was obtained at an equivalent ratio of the BP groups to the HEMA units.     

Preparation of pH-sensitive CaP nanoparticles coated with a phosphate-based block copolymer for efficient gene delivery

We have synthesized a phosphate-based block copolymer, PEG-b-PMOEP (poly(ethylene glycol)-b-poly(2-methacryloyloxyethyl phosphate)), with a narrow molecular weight distribution (PD = 1.06) by atomic transfer radical polymerization (ATRP), and have constructed calcium phosphate nanoparticles (CaPNs) coated with the block copolymer as an efficient and safe intracellular gene delivery carrier. The phosphate-mimic PMOEP block could be incorporated into the calcium phosphate (CaP) core to entrap pDNA, with the PEG block forming a shell to prevent uncontrolled growth of CaP precipitates and aggregates in physiological fluids. The CaPNs showed high colloidal stability at pH 7.4, but released entrapped pDNA at an endosomal pH of 5.0 through a pH-dependent protonation of phosphate moieties for efficient endosomal escape. The PEG-b-PMOEP/CaP/pDNA nanoparticles, which were formed simply by mixing, exhibited great potential as gene delivery carriers for future gene therapy applications due to their high transfection efficiency, low toxicity, and good stability under physiological conditions.     

Preparation of pH-sensitive amphiphilic block star polymers,their self-assembling characteristics and release behavior on encapsulated molecules

Poly(ethylene glycol) (PEG), a polymer with excellent biocompatibility, was widely used to form nanoparticles for drug delivery applications. In this paper, based on PEG, a series of pH-sensitive amphiphilic block star polymers of poly(ethylene glycol)-block-poly(ethoxy ethyl glycidyl ether) (PEG-b-PEEGE) with different hydrophobic length were synthesized by living anionic ring-opening polymerization method. The products were characterized using ¹H NMR and gel permeation chromatography. These copolymers could self-assemble in aqueous solution to form micellar structure with controlled morphologies. Transmission electron microscopy showed that the nanoparticles are spherical or rodlike with different hydrophilic mass fractions. The pH response of polymeric aggregates from PEG-b-PEEGE was detected by fluorescence probe technique at different pH. A pH-dependent release behavior was observed and pH-responsiveness of PEG-b-PEEGE was affected by the hydrophobic block length. These results demonstrated that star-shaped polymers (PEG-b-PEEGE) are attractive candidates as anticancer drug delivery carriers.     

Aqueous lubricating properties of charged (ABC) and neutral (ABA) triblock copolymer chains

Application of charged polymer chains as additives for lubricating neutral surfaces in aqueous environment, especially via polymer physisorption, is generally impeded by the electrostatic repulsion between adjacent polymers on the surface. In this study, we have investigated the adsorption and aqueous lubricating properties of an amphiphilic triblock copolymer, comprised of a neutral poly(ethylene glycol) (PEG) block, a hydrophobic poly(2-methoxyethyl acrylate) (PMEA) block, and a charged poly(methacrylic acid) (PMAA) block, namely PEG-b-PMEA-b-PMAA. After adsorption onto a nonpolar hydrophobic surface from aqueous solution, an equal and homogeneous mixture of neutral PEG and charged PMAA chains is formed on the surface, with an adsorbed polymer mass comparable to its fully neutral counterpart, PEG-b-PMEA-b-PEG. The lubricity of PEG-b-PMEA-b-PMAA showed significant improvement compared to fully charged polymer chains, e.g. poly(acrylic acid)-block-poly(2-methoxyethyl acrylate) (PAA-b-PMEA), which is attributed to dilution of charged moieties on the surface and subsequent improvement of the lubricating film stability.     

Effect of vortex-induced physical stress on fluorescent properties of dye-containing poly(ethylene glycol)-block-poly(lactic acid) micelles

The effect of vortex-induced mechanical stresses on the fluorescent properties of dye-containing poly(ethylene glycol)-block-poly(lactic acid) (PEG-b-PLA) block copolymer micelles has been investigated. PEG-b-PLA block copolymer micelles containing fluorescent dyes, 3,3′-dioctadecyloxacarbocyanine perchlorate (DiO) and/or 1,1′-dioctadecyl-3,3,3′,3′-tetramethylindocarbocyanine perchlorate (DiI), are prepared by a simple one-step procedure that involves the self-assembly of block copolymers and spontaneous incorporation of hydrophobic dyes into the core of the micelles. Upon vortexing, the micelle dispersion samples showed a decrease in fluorescence intensity in a rotational speed- and time-dependent manner. The results demonstrated that the vortexing can alter the fluorescent properties of the dye-containing PEG-b-PLA block copolymer micelle dispersion samples, suggesting the potential utility of block copolymer micelles as a mechanical stress-responsive nanomaterial.     

Suspension polymerization stabilized by triblock copolymer with CdS nanoparticles

In this paper, a new method to prepare polymer colloid particles stabilized by triblock copolymer with CdS nanoparticles was described. Poly(ethylene glycol-block-styrene-block-2-(dimethylamino) ethyl methacrylate) (PEG-b-PS-b-PDMAEMA) triblock copolymer was synthesized by sequential ATRP method. Micelles with CdS nanoparticles in the corona were prepared by “in situ” reaction of hydrogen sulfide with cadmium ion clusters in the corona of the micelles. The size of the CdS nanoparticles is affected by molar ratio of DMAEMA to cadmium ions and polymer concentration in the solution. When introduced into o/w emulsion the micelles reassemble on the surface of styrene oil droplets. PS colloid particles stabilized by triblock copolymer with CdS nanoparticles were achieved by suspension polymerization. TEM image indicates that CdS nanoparticles locate at the surface of the PS colloid particles.     

Preparation and properties of poly(ethylene glycol)-block-poly(acrylic acid)-coated cobalt nanocrystals

Reported in this paper are the preparation and properties of ?-Co nanocrystals coated by poly(ethylene glycol)-block-poly(acrylic acid) (PEG-b-PAA). These particles were prepared via the thermal decomposition of Co₂(CO)₈ at 185 °C in 1,2-dichlorobenzene, in the presence of the surfactant PEG-b-PAA and the co-surfactant trioctylphosphine oxide. At a given initial Co₂(CO)₈ concentration, the size of the particles increased with increasing Co₂(CO)₈-to-PEG-b-PAA molar ratio, and could be tuned between ∼5 and ∼20 nm. The size distribution of the particles narrowed as the Co₂(CO)₈ concentrations increased. The resultant particles were dispersible in a wide range of solvents, including chloroform, N,N-dimethylforamide, and water, which solubilized PEG. Magnetic measurements revealed that the particles possessed saturation magnetization close to that of bulk Co, suggesting high purity of the particles.     

Impacts of stereoregularity and stereocomplex formation on physicochemical, protein adsorption and cell adhesion behaviors of star-shaped 8-arms poly(ethylene glycol)-poly(lactide) block copolymer films

Biodegradable stereocomplex film exhibiting soft and stretchy character was prepared by simply blending between enantiomeric 8-arms poly(ethylene glycol)-block-poly(l-lactide) (8-arms PEG-b-PLLA) and 8-arms PEG-b-PDLA copolymers with star-shaped structure. The stereocomplex film exhibited higher T_g and PLA crystallinity than those of original copolymer films. Effects of stereoregularity and stereocomplexation on protein adsorption and L929 cells attachment/proliferation behaviors onto the films were analyzed from the viewpoint to design a new class of implantable soft biomaterial. The stereocomplex film was found to exhibit large amount of protein adsorption than original films. Furthermore, cell attachment efficiency and proliferation rate on the film were significantly enhanced by stereocomplexation. This stereocomplex material is expected to be applicable as degradable temporary scaffold for soft tissue regeneration. Consequently, it was indicated that the stereocomplex formation could be proposed to be a novel method to control the protein- and cell-adhesive properties of biodegradable matrix composed of PEG-PLA copolymer.     

Preparation of hydrogel nanoparticles by atom transfer radical polymerization of N-isopropylacrylamide in aqueous media using PEG macro-initiator

PEG-b-PNIPAM block copolymers are synthesized by the atom transfer radical polymerization of NIPAM using PEG macro-initiator. When the polymerization temperature is 25 °C, the block copolymer is soluble in water, whereas the block copolymer is phase-separated to form micelles during polymerization as the polymerization temperature is raised to 50 °C, the temperature above the LCST of PEG-b-PNIPAM. To prepare stable hydrogel nanoparticles in water at room temperature, a small amount of N,N′-ethylenebisacrylamide is added as a cross-linker to the reaction system, where the size of nanoparticles is controlled by the composition of mixed solvent.     

Stabilization of nano-TiO2 aqueous dispersions with poly(ethylene glycol)-b-poly(4-vinyl pyridine) block copolymer and their incorporation in photocatalytic acrylic varnishes

In this work, TiO₂ nanoparticles were dispersed and stabilized in water using a novel type of dispersant based on tailor-made amphiphilic block copolymers of poly(ethylene glycol)-block-poly(4-vinyl pyridine) (mPEG-b-P4VP) prepared by atom transfer radical polymerization (ATRP). The performance of this new block copolymer as dispersant was compared to a polyelectrolyte dispersant commonly used for TiO₂, sodium salt of polyacrylic acid (Na-PAA). The effect of dispersion technique and type and amount of dispersant on deagglomeration and stability of the TiO₂ aqueous suspensions were studied. After incorporation in a standard waterborne acrylic varnish formulation, dry film transparency, photocatalytic activity, and nanoparticle cluster size were also evaluated. The results show that mPEG-b-P4VP copolymer with appropriate block lengths can have a better performance than Na-PAA in terms of aqueous dispersion stabilization and cluster size reduction in the acrylic matrix. This translates into higher film transparency and photocatalytic performance.     

The effect of polystyrene-block-poly(4-vinylpyridine) prepared by a RAFT method in the dispersion polymerization of MMA

The dispersion polymerization of methyl methacrylate (MMA) has been carried out using polystyrene-block-poly(4-vinylpyridine) copolymer [P(S-b-4VP)], which was prepared by a reversible addition-fragmentation chain transfer (RAFT) method, as a steric stabilizer in an alcohol media. The stable polymer particles were obtained when the block copolymer concentrations increased from 1 to 10 wt% relative to the monomer and the average particle sizes decreased from 5.3 to 3.4 μm with the increasing concentration of the block copolymer. In particular, the incorporation of 2 wt% polystyrene-block-poly(4-vinylpyridine) produced 4.3 μm of monodisperse PMMA particles with 2.14% of C_v. Thus, the P(S-b-4VP) block copolymer prepared by the RAFT method is working not only as a steric stabilizer, but also in providing monodisperse micron-sized PMMA particles.     

Preparation of block-brush PEG-b-P(NIPAM-g-DMAEMA) and its dual stimulus-response

Well-defined dually responsive block-brush copolymer of poly(ethylene glycol)-b-[poly(N-isopropylacrylamide)-g-poly(N,N-dimethylamino-ethylmethacrylate)], [PEG-b-P(NIPAM-g-PDMAEMA)] was successfully prepared by the combination of atom transfer radical polymerization (ATRP) and click chemistry based on azide-capped PDMAEMA and alkyne-pending PEG-b-PNIPAM copolymer. Azide-capped PDMAEMA was synthesized through ATRP of DMAEMA monomer using an azide-functionalized initiator of β-azidoethyl-2-bromoisobutyrate. Alkyne-pending PEG-b-PNIPAM copolymer was obtained through ATRP copolymerization of NIPAM with propargyl acrylate. The final block-brush copolymer was synthesized by the click reaction between these two polymer precursors. Because of characteristics of three different blocks, the copolymer exhibited dually thermo- and pH-responsive behavior. The responsive behaviors of block-brush copolymer were studied by laser light scattering, temperature-dependent turbidity measurement and micro differential scanning calorimetry. The phase transition temperature of block-brush copolymer increased with the decrease of pH value. At pH = 5.0, the copolymer displayed weak thermo-responsive behavior and might form uni-molecular micelles upon heating. At higher pH values, the block-brush copolymer aggregated intermolecularly into the micelles during the phase transition.     

Synthesis and characterization of well-defined hydrophilic block copolymer brushes by aqueous ATRP

Homopolymer brushes of poly(N,N-dimethylacrylamide) (PDMA), poly(methoxyethylacrylamide) (PMEA) and poly(N-isopropylacrylamide)(PNIPAM) grown on atom transfer radical polymerization (ATRP) initiator functionalized latex particles were used as macroinitiators for the synthesis of PDMA-b-PNIPAM/PMEA, PMEA-b-PDMA/PNIPAM and PNIPAM-b-PDMA block copolymer brushes by surface initiated aqueous ATRP. The grafted homopolymer and block copolymer brushes were analyzed for molecular weight, molecular weight distribution, chain grafting density, composition and hydrodynamic thickness (HT) using gel permeation chromatography-multi-angle laser light scattering, ¹H NMR, particle size analysis and atomic force microscopy (AFM) techniques. The measured graft molecular weight increased following the second ATRP reaction in all cases, indicating the second block had been added. Chain growth depended on the nature of the monomer used for block copolymerization and its concentration. Unimodal distribution of polymer chains in GPC with non-overlap of molar mass-elution volume curves implied an efficient block copolymerization. This was supported by the increase in HT measured by particle size analysis, equilibrium thickness observed by AFM and the composition of the block copolymer layer by ¹H NMR analysis, both in situ and on cleaved chains in solution. ¹H NMR analysis of the grafted latex and cleaved polymers from the surface demonstrated that accurate determination of the copolymer composition by this method is possible without detaching polymer chains from surface. Block copolymer brushes obey the same power law dependence of HT on molecular weight as homopolymer brushes in good solvent conditions. The NIPAM-containing block copolymer brushes were sensitive to changes in the environment as shown by a decrease in HT with increase in the temperature of the medium.     

Synthesis and self-assembly of a novel Y-shaped copolymer with a helical polypeptide arm

A novel biodegradable Y-shaped copolymer, poly(l-lactide)₂-b-poly(γ-benzyl-l-glutamic acid) (PLLA₂-b-PBLG), was synthesized by the ring-opening polymerization (ROP) of N-carboxyanhydride of γ-benzyl-l-glutamate (BLG-NCA) with centrally amino-functionalized poly(l-lactide), PLLA₂-NH₂, as a macroinitiator in a convenient way. The Y-shaped copolymer and its precursors were characterized by ¹H NMR, FT-IR, GPC, WAXD and DSC measurements. The self-assembly of the PLLA₂-b-PBLG copolymer in toluene and benzyl alcohol was examined. It was found that the self-assembly of the copolymer was dependent on solvent and on relative length of the PBLG block. For a copolymer with PLLA blocks of 26 in total degree of polymerization (DP), if the PBLG block was long enough (e.g., DP = 54 or more), the copolymer/toluene solution became a transparent gel at room temperature. In benzyl alcohol solution, only PLLA₂-b-PBLG containing ca. 190 BLG residues could form a gel; those with shorter PBLG blocks (e.g., DP = 54) became nano-scale fibrous aggregates and these aggregates were dispersed in benzyl alcohol homogeneously. Copolymers with short PBLG blocks behaved like a pure PLLA both in toluene and in benzyl alcohol. These experimental results were discussed and explained by virtue of the helical conformation of PBLG and the interactions between the solvents and the PLLA and/or PBLG segments.     

Micellization and sol-gel transition of novel thermo- and pH-responsive ABC triblock copolymer synthesized by RAFT

A well-defined thermo- and pH-responsive ABC-type triblock copolymer monomethoxy poly(ethylene glycol)-b-poly(2-(2-methoxyethoxy) ethyl methacrylate-co-N-hydroxymethyl acrylamide)-b-poly(2-(diethylamino) ethyl methacrylate), mPEG-b-P(MEO₂MA-co-HMAM)-b-PDEAEMA, was synthesized by reversible addition-fragmentation chain transfer polymerization (RAFT). The ABC-type triblock copolymer was endowed thermo- and pH-responsive, corresponding to the thermosensitive properties of P(MEO₂MA-co-HMAM) and pH-responsive properties PDEAEMA segments, respectively. The thermo- and pH-responsive properties of copolymer aqueous solutions were studied by UV transmittance measurements, dynamic light scattering (DLS), transmission electron microscopy (TEM). The results showed that the N-hydroxymethyl acrylamide (HMAM) content in triblock copolymer affected the lower critical solution temperature (LCST) of the triblock copolymer aqueous solution. The copolymer self-assembled into core-shell micelles, with the thermoresponsive P(MEO₂MA-co-HMAM) block and the hydrophilic PEG block as the shell, the hydrophobic PDEAEMA block as the core, in alkaline solution at room temperature. While in acidic media, when the temperature above the lower critical solution temperature (LCST) of the triblock copolymer aqueous solution, the copolymer self-assembled into P(MEO₂MA-co-HMAM)-core micelles with mixed hydrophilic PEG and pH-responsive PDEAEMA coronas. Sol-gel transition temperature (T_sol-gel) for the triblock copolymer determined by vial inversion test further indicated that it is dependent on the concentration of the triblock copolymers and solution pH. Copolymer hydrogel loaded with bovine serum albumin (BSA) were used for the sustained release study. The results indicated that the hydrogel was a promising candidate for controlling protein drug delivery.