Mn/Co oxide on Ni foam as a bifunctional catalyst for Li–air cells

Binary Mn/Co oxide sheets with spherical flower-like hierarchical structure are grown directly on the surface of a Ni foam skeleton as a cathode for Li–O₂ batteries using a hydrothermal method. This integrated cathode architecture eliminates the negative effects of a conductive carbon additive and binder on the electrochemical performance of Li–O₂ batteries and minimizes the processing steps in fabrication of cathodes for Li–O₂ batteries. The porous Ni foam acts as a scaffold and current collector, and the highly hierarchical porous flower-like structure of the binary Mn/Co oxide sheet acts as a highly active catalyst. Together, they facilitate effective diffusion of oxygen gas as well as rapid ion and electron conduction during electrochemical reactions. When assembled in Li–O₂ cells, the prepared catalyst exhibits excellent catalytic activities, including the oxygen reduction and oxygen evolution reactions. In particular, the Li–O₂ cell using the cathode delivers an extremely high specific discharge capacity of 9690 mAh g^-1 under a applied specific current of 200 mA g^-1 and operate successfully in a long lifespan of 66 cycles even under a high specific current of 600 mA g^-1 and a limited discharge-charge capacity mode of 1000 mAh g^-1. The simultaneous effect of the fast electron transport kinetics provided by the free-standing structure and the high catalytic activity of the binary Mn/Co oxide show promise for use in air electrodes for Li–O₂ batteries.     

LiAlO2-coated LiNi0.8Co0.1Mn0.1O2 and chlorine-rich argyrodite enabling high-performance all-solid-state lithium batteries at suitable stack pressure

All-solid-state lithium batteries (ASSLBs), which are consisted of Li_5.5PS_4.5Cl_1.5 electrolyte, metal lithium anode and LiNi_0.8Mn_0.1Co_0.1O₂ (NCM811) cathode, are speculated as a promising next generation energy storage system. However, the unstable oxide cathode/sulfide-based electrolyte interface and the dendrite formation in sulfide electrolyte using the lithium metal anode hinder severely commercialization of the ASSLBs. In this work, the dendrite formation in sulfide electrolyte is investigated in lithium symmetric cell by varying the stack pressure (3, 6, 12, 24 MPa) during uniaxial pressing, and uniformly nanosized LiAlO₂ buffer layer was carefully coated on NCM811 electrode (LiAlO₂@NCM811) to improve the cathode/electrolyte interface stability. The result shows that lithium symmetrical cell has a steady voltage evolution over 400 h under 6 MPa stacking pressure, and the assembled LiAlO₂@NCM811/Li_5.5PS_4.5Cl_1.5/Li battery under the stack pressure of 6 MPa exhibits large initial discharge specific capacity and excellent cycling stability at 0.05 C and 25 °C. The feasibility of using the lithium metal anode in all-solid-state batteries (ASSBs) under suitable stack pressure combined with uniformly nanosized LiAlO₂ buffer layer coated on NCM811 electrode supply a facile and effective measures for constructing ASSLBs with high energy density and high safety.     

In-situ synthesis of reduced graphene oxide wrapped Mn3O4 nanocomposite as anode materials for high-performance lithium-ion batteries

We report a novel in-situ symbiosis method to prepare reduced graphene oxide wrapped Mn₃O₄ nanoparticles (rGO/Mn₃O₄) with uniform size about 50 nm as anodes for lithium-ion batteries (LIBs), which can simplify the preparation process and effectively reduce pollution. The rGO/Mn₃O₄ nanocomposite exhibited a reversible specific capacity of 795.5 mAh g^?1 at 100 mA g^?1 after 200 cycles (capacity retention: 87.4%), which benefits from the unique structural advantages and the synergistic effect of rGO and Mn₃O₄. The Mn₃O₄ nanoparticles encapsulated among the rGO nanosheets exhibited good electrochemical activity, and the multilayer wrinkled rGO sheets provided a stable 3D conduction channel for Li⁺/e^? transport. The rGO/Mn₃O₄ nanocomposite is a promising anode candidate for advanced LIBs with excellent cycling performance and rate performance. Furthermore, this new preparation method can be extended to green and economical synthesis of advanced graphene/manganese-based nanocomposites.     

High-voltage all-solid-state lithium metal batteries prepared by aerosol deposition

High-energy-density and safe rechargeable batteries are key components to realizing a low-carbon society. All-solid-state Li-metal batteries have the potential to achieve both high safety and high energy densities. However, the large interfacial resistance between solid electrolytes and cathodes is the major challenge for developing all-solid-state Li-metal batteries. Here we deposited a Li-rich layered metal oxide Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ (LMNC) thin film (6 µm thick) on an Al-doped Li₇La₃Zr₂O₁₂ (LLZO) substrate at room temperature by aerosol deposition. The LMNC particles were coated with Li₃BO₃ (LBO), which acted as a binder to hold LMNC and LLZO together at heating. As a result, good interfacial contact was achieved between LMNC and LLZO. Yet reactions between LMNC and LBO would occur at heat treatment temperatures above 600 °C. The highest discharge capacity of the all-solid-state Li/LLZO/LBO-LMNC cell at 0.1 C and 60 °C was 223 mAh g^-1. The main reason for the cell capacity decay was the cracking of the LBO-LMNC cathode layer during cycling. Searching for a more suitable binder material with a high fracture toughness is crucial for further developing the aerosol-deposited LLZO-based all-solid-state Li metal batteries.     

Novel Glass‐Ceramic Composition as Sealant for SOFCs

This work deals with the design, the characterization, and testing of a novel glass‐ceramic to be used as sealant for planar solid oxide fuel cells and its compatibility with Mn_1.5Co_1.5O₄‐coated Crofer22APU. Thermal, sintering, and crystallization behavior and thermo mechanical properties of the sealant are reviewed and discussed, indicating therefore that these compositions can be deposited at 850°C and provide an excellent compatibility with both the Mn_1.5Co_1.5O₄‐coated Crofer22APU and the anode‐supported electrolyte. In particular, Mn_1.5Co_1.5O₄‐coated Crofer22APU/sealant/anode‐supported‐electrolyte joined samples have been submitted to thermal tests (in air atmosphere) from RT to 800°C (SOFC operating temperature) up to 500 h. No interactions, cracks formation, or failure were observed at the Mn_1.5Co_1.5O₄‐coated Crofer22APU/sealant interface and between the glass‐ceramic and the anode‐supported‐electrolyte after 500 h of thermal tests in air atmosphere.     

Influence of Co3O4, Fe2O3 and SiC on microstructure and properties of glass foam from waste cathode ray tube display panel (CRT)

Abstract

In the present study, the effect of temperature and oxidising agents such as Fe₂O₃ and Co₃O₄ on physical and mechanical properties of glass foam is investigated. The glass foam is made of panel glass from dismantled cathode ray tubes and SiC as a foaming agent. In the process, powdered waste glass (mean particle size below 63 μm) in addition to 4 wt-% SiC powder (mean particle size below 45 μm) are combined with Fe₂O₃ and Co₃O₄ (0·4, 0·8 and 1·2 wt-%) have been sintered at 950 and 1050°C. The glass foamed containing 1·2 wt-% Co₃O₄ has good physical properties, with porosity more than 80% and bending strength more than 1·57±0·12 MPa. However, by adding different amounts of Fe₂O₃ in comparison with samples without iron oxide, little changes in porosity and strength are obtained.     

Novel Lithium Ion Batteries Based on a Tin Anode and on Manganese Oxide Cathodes

In this paper we report two innovative lithium ion batteries formed by the combination of a nanosized tin anode and a LiNi_0.5Mn_1.5O₄ or a LiNi_0.33Co_0.33Mn_1.33O₂ cathode. The batteries have a very stable cycling response at a high rate of 1C with an excellent capacity delivery, i.e., 140 mAhg⁻¹ and 175 mAhg⁻¹, respectively. Estimated energy density values are of the order of 150 Whkg⁻¹ for both batteries.     

Microstructure and electrochemical properties of LBO-coated Li-excess Li1+xMn2O4 cathode material at elevated temperature for Li-ion battery

An amorphous glass film, Li₂O-2B₂O₃ (LBO) glass, was coated on the surface of the cathode material by solution method. The Li-excess cathode powder Li_1+xMn₂O₄ derived from co-precipitation method was calcined with various weight percentage of the surface modified lithium boron glass. Fine powders with distinct particle size, size distribution and morphology were fabricated. The electron probe microanalyzer (EPMA) was employed to evaluate the composition of LBO-coated Li_1+xMn₂O₄. The morphology was observed with a field emission scanning electron microscope (FE-SEM), and the particle size in the range of several microns measured by laser scattering. The electrochemical behavior of the cathode powder was examined by using two-electrode test cells consisted of a cathode, metallic lithium as anode, and an electrolyte of 1 M lithium hexafluorophosphate (LiPF₆). Cyclic charge/discharge testing of the coin cells, fabricated by both LBO-coated and base Li_1+xMn₂O₄ material were conducted. The LBO-coated cathode powder with the fading rate of only 7% after 25 cycles showed better cycleability than the base one with the fading rate of 17% after 25 cycles, particularly at higher temperature. It is demonstrated that the employment of LBO glass coated Li_1+xMn₂O₄ cathode material exhibited higher discharge capacity and significantly reduced the fading rate after cyclic test.     

Catalytic behavior of V2O5 in rechargeable Li–O2 batteries

The possibility of using vanadium pentoxide (V₂O₅) as a catalyst in rechargeable lithium–oxygen (Li–O₂) batteries was studied. A V₂O₅-carbon composite was cast onto Ni foam to form a cathode. Electrochemical cells designed based on the flat cell manufactured by Hohsen Corporation were fabricated. The initial discharge capacity was 715 mA?h?g^?1, and the maximum discharge capacity reached 2,260 mA?h?g^?1 during the twelfth cycle. The cell had high capacity retention during cycling (1.24?% during cycles 2–8). V₂O₅ acted as a catalyst as well as an active material, improving the specific capacity and capacity retention of the non-aqueous Li–O₂ cell more effectively than do other materials.     

Direct Biomass Fuel Cell (BMFC) with Anode/Catalyst Comprising a Nanocomposite of a Mesoporous n-Semiconductor Film and a Metal Thin Layer: A New Concept of Catalyst Design

Abstract  

We designed an efficient direct biomass fuel cell (BMFC) anode and prepared a nanocomposite [base electrode/mesoporous n-semiconductor (SC) thin film/metal thin layer]. A Pt thin layer was photodeposited onto a mesoporous 20-μm thick TiO₂ thin film having a roughness factor of 2000, which was coated on an F-doped tin oxide/glass base electrode (FTO). This anode/catalyst nanocomposite was efficient at decomposing aqueous solutions of glucose and other biomass-related compounds in combination with an O₂-reducing cathode the other side of which was exposed to ambient air. The nanocomposite exhibited sharp optimum conditions at the atomic ratio of Pt/Ti = 0.33 in the BMFC, generating high electrical power of 2 mW cm⁻² without any light irradiation or bias potential when using a 1 M glucose aqueous solution. This output power is 20 times as large as that generated by a mesoporous TiO₂ film anode under UV-light (18 mW cm⁻²) irradiation. At this ratio, the coated Pt specifically exhibited metallic luster, and its average Pt thickness on the mesoporous TiO₂ nanostructure was calculated to be 0.40 nm. The high BMFC activity was interpreted by the simultaneous Schottky-junction/Ohmic contact nature of the nanocomposite. Other biomass compounds such as sucrose, ethanol and polysaccharides were also effective as direct fuels for the BMFC. Immediately after soaking this composite anode without a cathode in a glucose aqueous solution, continuous evolution of H₂ bubbles was observed from the anode surface. The electrical power generation and H₂ production are easily changed by connecting and disconnecting a cathode, respectively. Based on a simple design and calculation, the present system with glucose fuel has the potential to construct a module stack of 2 kW m⁻³. Simultaneous material/energy circulation by using the BMFC with biomass and its waste fuel is proposed for application in future social systems.     

Pressureless all-solid-state sodium-ion battery consisting of sodium iron pyrophosphate glass-ceramic cathode and β″-alumina solid electrolyte composite

In recent years, the expansion of demand for lithium ion batteries has resulted in soaring prices of the constituent resources. From the viewpoint of safety, studies on all-solid-state batteries are actively being carried out. In this study, we succeeded in driving all-solid-state batteries derived from nontoxic oxide glasses at room temperature without requiring scarce resources such as lithium and cobalt. The main structure of the ceramic batteries with a simple structure in which Na₂FeP₂O₇ crystallized glass and β″-alumina solid solution are joined by pressureless cofiring at 550°C. During the crystallization of Na₂O-Fe₂O₃-P₂O₅ glass, fusion with the β″-alumina solid solution is achieved. Reversible charge and discharge of 80 mAh/g were achieved at room temperature. It is not necessary to apply pressure during cell preparation or the use of the batteries. Furthermore, the strong junction at the cathode and electrolyte interface does not peel off during charge and discharge over a long period of 623 cycles. Ex situ X-ray photoelectron spectroscopy revealed partial Fe⁴⁺ induction and a reversible charge and discharge reaction even after overcharging to 9 V. It was demonstrated that Na₂FeP₂O₇ is very stable against overcharging to 9 V.     

Utilization of Solution Grown Manganese Oxide Nanocrystallite to Microstructure Against Bacteria’s Inhibition

The preparation and applications of transition metal oxide (TMOs) nano and micro structures continues inspiring to material science. This is due to TMOs are imperative and to discover in a various fields. Over a long range of nano & micro structure materials, especially, manganese oxide (Mn₃O₄) structures have numerous technological  applications in various fields such as wastewater treatment, catalysis, sensors, supercapacitors, alkaline and rechargeable batteries etc. The solution process was adopted, which is the best way to follow the preparation of manganese oxide structures and the material was well characterized. The present work shows the formation of Mn₃O₄ microrods (referred to as Mn₃O₄MRs) and applied against the pathogenic bacteria’s (E.coli and S.aureus) at different concentrations of MRs (50, 100, 200, 300, 400 and 500 µg/mL) for to control the proliferation rate and accessed via UV–vis spectroscopy. The crystallite size and their morphology was examined via TEM and it reveals that the individual particle is very small in size (~?7.5 nm) with spherical shaped morphology. The morphology after the interaction of MRs on bacteria’s were also examined through Bio-TEM, which revels that the particles interns to the bacterial cells and reacted. The statistical analytical methods was applied and determined the suitable concentration of Mn₃O₄MRs under the different statistical parameters such as accuracy, precision methods, LOD and LOQ (for E.coli 0.050 and 0.153) and (for S.aureus 0.135 and 0.409 μg mL^?1) respectively, were accomplished for to know the calculative and mechanistic approach and their role of Mn₃O₄MRs against E.coli and S.aureus.

     

All-solid-state lithium battery with a three-dimensionally ordered Li1.5Al0.5Ti1.5(PO4)3 electrode

To fabricate all-solid-state Li batteries using three-dimensionally ordered macroporous Li_1.5Al_0.5Ti_1.5(PO₄)₃ (3DOM LATP) electrodes, the compatibilities of two anode materials (Li₄Mn₅O₁₂ and Li₄Ti₅O₁₂) with a LATP solid electrolyte were tested. Pure Li₄Ti₅O₁₂ with high crystallinity was not obtained because of the formation of a TiO₂ impurity phase. Li₄Mn₅O₁₂ with high crystallinity was produced without an impurity phase, suggesting that Li₄Mn₅O₁₂ is a better anode material for the LATP system. A Li₄Mn₅O₁₂/3DOM LATP composite anode was fabricated by the colloidal crystal templating method and a sol-gel process. Reversible Li insertion into the fabricated Li₄Mn₅O₁₂/3DOM LATP anode was observed, and its discharge capacity was measured to be 27 mA h g⁻¹. An all-solid-state battery composed of LiMn₂O₄/3DOM LATP cathode, Li₄Mn₅O₁₂/3DOM LATP anode, and a polymer electrolyte was fabricated and shown to operate successfully. It had a potential plateau that corresponds to the potential difference expected from the intrinsic redox potentials of LiMn₂O₄ and Li₄Mn₅O₁₂. The discharge capacity of the all-solid-state battery was 480 μA h cm⁻².     

Nanoparticles constructed mesoporous coral-like Mn2O3 as high performance anode for lithium-ion batteries

As well established, the morphology and architecture of electrode materials greatly contribute to the electrochemical properties. Herein, a novel structure of mesoporous coral-like manganese (III) oxide (Mn₂O₃) is synthesized via a facile solvothermal method coupled with the carbonization under air. When fabricated as anode electrode for lithium-ion batteries (LIBs), the as-prepared Mn₂O₃ exhibits good electrochemical properties, showing a high discharge capacity of 1090.4 mAh g^?1 at 0.1 A g^?1, and excellent rate performance of 410.4 mAh g^?1 at 2 A g^?1. Furthermore, it maintains the reversible discharge capacity of 1045 mAh g^?1 at 0.1 A g^?1 after 380 cycles, and 755 mAh g^?1 at 1 A g^?1 after 450 cycles. The durable cycling stability and outstanding rate performance can be attributed to its unique 3D mesoporous structure, which is favorable for increasing active area and shortening Li⁺ diffusion distance.     

An ultrafast synthesis method of LiNi1/3Co1/3Mn1/3O2 cathodes by flash/field‐assisted sintering

LiNi_1/3Co_1/3Mn_1/3O₂ as a promising cathode material in lithium‐ion batteries was synthesized by flash/field‐assisted sintering technique for the first time. This study showed that the current‐limited synthesis of LiNi_1/3Co_1/3Mn_1/3O₂ could be carried out at temperatures less than 400°C for only 8 minutes, compared with the conventional pressureless sintering at 850°C for 12 hours. X‐ray diffraction results showed the phase evolution from precursor mixtures to the final LiNi_1/3Co_1/3Mn_1/3O₂ products during flash/field‐assisted sintering process and a well‐layered structure without undesirable cation mixing in the as‐formed LiNi_1/3Co_1/3Mn_1/3O₂. Combined with the lowered sintering temperatures and reduced sintering time, the excellent electrochemical performance of flash/field‐assisted sintered LiNi_1/3Co_1/3Mn_1/3O₂ materials suggested that this technique could be an energy‐efficient approach for the synthesis of lithium‐ion battery cathode materials and other materials requiring high‐temperature heat treatment.     

Construction of hierarchical yolk-shell structured Mn3O4@NC as efficient sulfur hosts for Li–S batteries

The high theoretical capacity and abundant reserves of sulfur makes Li–S batteries a promising candidate for future energy-storage devices. However, the low electrical conductivity of sulfur and severe polysulfides dissolution and migration hinder it practical application. To address the problems, we design a hierarchical yolk-shell structure with polar metal oxide Mn₃O₄ yolks and N-doped carbon shells as sulfur host. The N-doped carbon shell enhances the conductivity and provide physical confinement to polysulfides while the Mn₃O₄ yolks have strong chemical bonding effect with polysulfides. Besides, the sufficient void space in yolk-shell structure can ensure a high sulfur loading content (80%) as well as accommodate severe volume change of sulfur during lithiation. Benefiting from these merits, the yolk-shell Mn₃O₄@NC/S electrode exhibit a high capacity of 581 mAh g^-1 at 1 C and enhanced cycling stability with a capacity retain of 84% over 300 cycles at 0.5 C, which is superior to yolk-shell Mn₃O₄@NC/S with more Mn₃O₄ residual and N-doped carbon shells/S without Mn₃O₄ inside.     

CeF3-modified LiNi1/3Co1/3Mn1/3O2 cathode material for high-voltage Li-ion batteries

A facile chemical deposition method has been adopted to prepare cerium fluoride (CeF₃) surface modified LiNi_1/3Co_1/3Mn_1/3O₂ as cathode material for lithium-ion batteries. Structure analyses reveal that the surface of LiNi_1/3Co_1/3Mn_1/3O₂ particles is uniformly coated by CeF₃. Electrochemical tests indicate that the optimal CeF₃ content is 1 wt%. The 1 wt% CeF₃-coated LiNi_1/3Co_1/3Mn_1/3O₂ can deliver a discharge capacity of 107.1 mA h g⁻¹ even at 5 C rate, while the pristine does only 57.3 mA h g⁻¹. Compared to the pristine, the 1 wt% CeF₃-coated LiNi_1/3Co_1/3Mn_1/3O₂ exhibits the greatly enhanced capacity and cycling stability in the voltage range of 3.0–4.5 V, which suggests that the CeF₃ coating has the positive effect on the high-voltage application of LiNi_1/3Co_1/3Mn_1/3O₂. According to the analyses from electrochemical impedance spectra, enhanced electrochemical performance is mainly because the stable CeF₃ coating layer can prevent the HF-containing electrolyte from continuously attacking the LiNi_1/3Co_1/3Mn_1/3O₂ cathode and retard the passivating layer growth on the cathode.     

Synthesis of Mn3O4/N-doped graphene hybrid and its improved electrochemical performance for lithium-ion batteries

Mn₃O₄/N-doped graphene (Mn₃O₄/NG) hybrids were synthesized by a simple one-pot hydrothermal process. The scanning electron microscopy (SEM), transition electron microscopy (TEM), X-ray powder diffraction (XRD), Thermogravimetric analysis (TG), Raman Spectroscopy and X-ray photoelectron spectroscopy (XPS) were used to characterize the microstructure, crystallinity and compositions. It is demonstrated that Mn₃O₄ nanoparticles are high-dispersely anchored onto the individual graphene nanosheets, and also found that, in contrast with pure Mn₃O₄ obtained without graphene added, the introduction of graphene effectively restricts the growth of Mn₃O₄ nanoparticles. Simultaneously, the anchored well-dispersed Mn₃O₄ nanoparticles also play a role as spacers in preventing the restacking of graphene sheets and producing abundant nanoscale porous channels. Hence, it is well anticipated that the accessibility and reactivity of electrolyte molecules with Mn₃O₄/NG electrode are highly improved during the electrochemical process. As the anode material for lithium ion batteries, the Mn₃O₄/NG hybrid electrode displays an outstanding reversible capacity of 1208.4 mAh g⁻¹ after 150 cycles at a current density of 88 mA g⁻¹, even still retained 284 mAh g⁻¹ at a high current density of 4400 mA g⁻¹ after 10 cycles, indicating the superior capacity retention, which is better than those of bare Mn₃O₄, and most other Mn₃O₄/C hybrids in reported literatures. Finally, the superior performance can be ascribed to the uniformly distribution of ultrafine Mn₃O₄ nanoparticles, successful nitrogen doping of graphene and favorable structures of the composites.     

A novel BaCe0.5Fe0.3Bi0.2O3–δ perovskite-type cathode for proton-conducting solid oxide fuel cells

A perovskite-type BaCe_0.5Fe_0.3Bi_0.2O_3-δ (BCFB) was employed as a novel cathode material for proton-conducting solid oxide fuel cells (SOFCs). The single cells with the structure of NiO-BaZr_0.1Ce_0.7Y_0.2O_3-δ (BZCY7) anode substrate|NiO-BZCY7 anode functional layer|BZCY7 electrolyte membrane|BCFB cathode layer were fabricated by a dry-pressing method and investigated from 550 to 700 °C with humidified hydrogen (~3% H₂O) as the fuel and the static air as the oxidant. The low interfacial polarization resistance of 0.098 Ω cm² and the maximum power density of 736 mW cm⁻² are achieved at 700 °C. The excellent electrochemical performance indicates that BCFB may be a promising cathode material for proton-conducting SOFCs.     

A medium-entropy perovskite oxide La0.7Sr0.3Co0.25Fe0.25Ni0.25Mn0.25O3-δ as intermediate temperature solid oxide fuel cells cathode material

In this study, we report a novel medium-entropy perovskite oxide of La_0.7Sr_0.3Co_0.25Fe_0.25Ni_0.25Mn_0.25O_3-δ (LSCFNM73) with high constitutive entropy (S_config) as the cathode material of intermediate temperature solid oxide fuel cells (IT-SOFCs). The intrinsic properties of phase structure, electrical conductivity, thermal expansion and oxygen adsorption capacity of La_1-xSr_xCo_0.25Fe_0.25Ni_0.25Mn_0.25O_3-δ (LSCFNM, x = 0, 0.1, 0.2, 0.3) oxides are evaluated in detail. The LSCFNM73 oxide exhibits the maximum electrical conductivity of 464 S cm⁻¹ at 800 °C and a relatively lower thermal expansion coefficient (TEC) of 15.34 × 10⁻⁶ K⁻¹, which is selected as the propriate cathode composition. The B-site of LSCFNM73 contains four elements which can increase the configuration entropy. Additionally, NiO-Yttria stabilized zirconia (YSZ) supported fuel cell is fabricated by tape casting, hot pressing-lamination, co-sintering and screen printing technologies. The fuel cell demonstrates a maximum power density of 1088 mW cm² at 800 °C, and excellent stability at 750 °C under 0.75V in 120 h and 10 times thermal cycling between 750 °C and 400 °C. Therefore, the medium-entropy LSCFNM73 oxide can be applied in IT-SOFCs as a competitive cathode material.