Structural,microstructural, and magnetic studies of Y3Fe5-xNixO12 garnet nanoparticles

This paper reports the structural and magnetic properties of a series of Y₃Fe_5-xNi_xO₁₂ (x = 0, 0.05, 0.1, and 0.2) nanopowders synthesized by the citrate combustion method. We have discussed the change in different properties with the variation in calcination temperatures as well as the Ni ion substitution in yttrium iron garnet. X-ray diffraction study confirmed the desired garnet phase formation in all the calcined powders, and the crystallinity improved with an increase in calcination temperature. The crystallite sizes were observed in the range 47–52 nm and 84–94 nm for the samples calcined at 800 and 1000 °C, respectively. Scanning electron micrographs confirmed that the grains were in the nanometre range (132–170 nm) at 800 °C and increased (351–363 nm) at 1000 °C. Larger grains at high calcination temperature resulted in the enhanced saturation magnetization and a decrease in coercivity. Curie temperature (T_c) was observed in the range 558–560 K for all the calcined Y₃Fe_5-xNi_xO₁₂ samples. Nickel substitution for iron sites in Y₃Fe_5-xNi_xO₁₂ decreased the saturation magnetization and enhanced the coercivity. This could be related to the substitution of Ni ions for tetrahedral iron sites, which changed the magnetic exchange interactions of different lattice sites. The magnetic anisotropy constant (K) increases with the enhancement of calcination temperature, whereas it decreases with nickel ion substitution in Y₃Fe_5-xNi_xO₁₂. This study suggests that the structural and magnetic properties can be tuned by Ni substitution for the Fe ions in Y₃Fe₅O₁₂ garnets at different calcination temperatures, which make them promising candidates for various technological applications.     

Low-temperature firing and microwave dielectric properties of MgNb2-xVx/2O6-1.25x ceramics

MgNb_2-xV_x/2O_6-1.25x (0.1≤x≤0.6) ceramics with orthorhombic columbite structures were prepared at low-temperature by a solid-phase process. The phase component, microscopic morphology, low-temperature sintering mechanism and microwave dielectric performance of MgNb_2-xV_x/2O_6-1.25x ceramics were comprehensively investigated. Low-temperature sintering densification of dielectric ceramics was achieved via the nonstoichiometric substitution of vanadium (V) at the Nb-site. In contrast to pure MgNb₂O₆ ceramics, the sintering temperature of MgNb_2-xV_x/2O_6-1.25x (x = 0.2) ceramics was reduced by nearly 300 °C owing to the liquid-phase assisted sintering mechanism. The liquid phase arises from the autogenous low-melting-point phase. Meanwhile, MgNb_2-xV_x/2O_6-1.25x (x = 0.2) samples with nonstoichiometric substitution could achieve a more than 900% improvement in the Q × f value, compared with stoichiometrically MgNb_2-xV_xO₆ (x = 0.1, 0.2) ceramics. Finally, MgNb_2-xV_x/2O_6-1.25x dielectric ceramics possess outstanding microwave dielectric properties: ε_r = 20.5, Q × f = 91000, and τ_f = -65 ppm/°C when sintered at 1030 °C for x = 0.2, which provides an alternative material for LTCC technology and an effective approach for low-temperature sintering of Nb-based microwave dielectric ceramics.     

Effect of Mg doping on magnetic,and dielectric properties of NiCr2O4 nanoparticles

The structural, magnetic, and dielectric properties of spinel Magnesium (Mg) doped Nickel chromite (NiCr₂O₄) nanoparticles (NPs) have been studied in detail. The X-ray powder diffraction exhibited normal spinel phase formation of Mg_xNi_1-xCr₂O₄ (x = 0, 0.2, 0.4, 0.6, and 1) NPs with a maximum average crystallite size of about 44 nm for x = 0.2 composition. The FTIR spectra of these NPs revealed the characteristic Ni–O and Mg–O and Cr–O bands around 639 cm^?1 and 497 cm^?1, respectively which confirmed the spinel structure. Temperature-dependent zero field cooled and field cooled graphs of NiCr₂O₄ NPs showed phase changes from ferrimagnetic to paramagnetic state at 86 K, while MgCr₂O₄ NPs showed antiferromagnetic (AFM) transition at Neel temperature (T_N) at 15 K due to corner-sharing of Cr³⁺ ions at a tetrahedral lattice site resulting in a highly magnetic frustrated structure. The field dependent magnetization (M ? H) loops of Mg_xNi_1-xCr₂O₄ NPs confirmed the competing AFM interactions and ferrimagnetic interactions resulting in a sharp decreased saturation magnetization with Mg doping. Dielectric constant, dielectric loss, and ac conductivity of these NPs showed size-dependent variation and depicted maximum value at x = 0.2 Mg concentration. In summary, the magnetic and dielectric properties of Mg doped NiCr₂O₄ NPs were modified by variations in the average crystallite size and magnetic exchange interactions, which may be suitable for different technological applications.     

Multiple magnetic phase transitions in NixMn1-xCo2O4

We prepared pure-phase Ni_xMn_1-xCo₂O₄ (x = 0, 0.25, 0.5, 0.75 and 1) nanoparticles using a low-temperature solid-state reaction method. Magnetization measurement results showed that with Ni doping, the Curie temperature and coercivity of Ni_xMn_1-xCo₂O₄ increased. Multiple magnetic phases that transition from paramagnetic to ferrimagnetic to ferrimagnetic and antiferromagnetic were observed to coexist in the Ni_0.5Mn_0.5Co₂O₄ sample. At low temperatures, the ferromagnetic and antiferromagnetic phases coexist in Ni_xMn_1-xCo₂O₄ (x = 0 and 0.25), and as the concentration of Ni increases, Ni_xMn_1-xCo₂O₄ (x = 0.75 and 1) show a spin glass state. The structure of Ni_xMn_1-xCo₂O₄ (x < 0.5) is mainly affected by cation defects, and by cation substitution when x is greater than 0.5. The results of first-principles calculations show that covalent bonds exist in Ni_xMn_1-xCo₂O₄ and that the strength of the Ni-O bond is greater than that of the Mn-O bond.     

The influence of Nd substitution in Ni–Zn ferrites for the improved microwave absorption properties

Nanocrystalline Ni–Zn ferrites with different neodymium contents (Ni_0.5Zn_0.5Nd_xFe_2-xO₄) were synthesized by sol-gel route combined with self-propagating combustion (SPC) method. The presence of surface functional groups, crystal structure and morphology of the samples were studied by FT-IR, XRD and SEM. The results show that the prepared samples are composed of spinel phase under the condition of low neodymium content, like the pure Ni–Zn ferrite. While neodymium oxide appears after the content of Nd³⁺ exceeds a certain limit (x > 0.04) and there exist two phases in the ferrite. The results of vibrating sample magnetometer (VSM) and vector network analyzer (VNA) show that adjusting the content of Nd is significant in improving the dielectric properties and microwave absorption capacity of the materials, specifically at low frequencies. When x < 0.04, the enhancement of dielectric loss ability of spinel ferrites by doping Nd³⁺ is the dominant factor affecting microwave absorption ability of samples. The secondary phase Nd₂O₃ hardly appears under this condition, thus the weakening effect of Nd³⁺ addition on magnetic loss ability is not obvious. When x = 0.04, the optimal absorption peak of the material reaches −20.8 dB at 4.4 GHz with a thickness of 8.5 mm and the effective absorption bandwidth (R_L < −10 dB) was 3.2 GHz. On the contrary, when x > 0.04, the magnetic loss ability decreases rapidly (e.g., Ms decreases from 82.47 emu/g to 59.77 emu/g). Meanwhile, the dielectric loss increases slowly and the microwave absorption capacity decreases.     

Influence of rare-earth La3+ ion doping on microstructural,magnetic and dielectric properties of Mg0.5Ni0.5Fe2-xLaxO4 (0 ≤ x ≤ 0.1) ferrite nanoparticles

A series of La³⁺ ion doped magnesium nickel ferrites, Mg_0.5Ni_0.5Fe_2-xLa_xO₄ (0 ≤ x ≤ 0.1) having a cubic spinel structure were prepared by the co-precipitation method. Various characterization techniques, including X-ray diffractometer (XRD), high resolution transmission electron microscopy (HR-TEM), electron spin resonance (ESR) and vibrating sample magnetometer (VSM) were used to investigate structural and magnetic properties. The average crystallite size decreases and lattice parameter increases with La³⁺ ion doping and lie in the range of 12–7 nm and 8.347–8.361 Å respectively. Analysis of ESR spectra reveals that, g-value with La³⁺ ion addition decreases from 2.57 to 2.12. The saturation magnetization and the coercivity decrease with increasing rare-earth content. Magnetic-hysteresis (M − H) loop shifts from a ferromagnetic to a superparamagnetic nature with La³⁺ ion addition. The dielectric study was carried out in the frequency range of 1 KHz to 4000 KHz and temperature ranging 30 °C–350 °C using the impedance analyzer. The dielectric constant decreases with increasing frequency and the La³⁺ ion concentration. The dielectric loss of the sample increases with increasing temperature. The magnetic properties of the synthesized nanoparticles make them a potential material for stable ferrofluid application and the low tangent loss value makes these material a potential candidate for frequency-based applications.     

Effects of Magnesium–Tungsten co-substitution on crystal structure and microwave dielectric properties of CaTi1-x(Mg1/2W1/2)xO3 ceramics

CaTi_1-x (Mg_1/2W_1/2)_xO₃ (x = 0, 0.02, 0.04, 0.06, 0.08) dielectric ceramics were synthesized via the traditional solid-state reaction method. Crystal structure and microwave dielectric properties of CaTi_1-x (Mg_1/2W_1/2)_xO₃ system were systematically investigated based on chemistry bond theory (P–V-L theory) for the first time. The pure perovskite phase was obtained for all doped samples, as confirmed through the XRD and Rietveld refinement results. The lattice characteristics were closely related to the microwave dielectric properties. The bond ionicity, lattice energy, and bond energy affected the dielectric constant, quality factor, and temperature stability of the ceramic material. Through the use of (Mg_1/2W_1/2)⁴⁺ doped on B-site, the CaTi_1-x (Mg_1/2W_1/2)_xO₃ system can maintain a high dielectric constant (ε_r > 100) while effectively reducing the τ_f value from 800 ppm/^°C to less than 300 ppm/^°C and improving the Q × f value to 9650 GHz (at 3.76 GHz).     

Mechanistic study of the effect of Ca–Sn co-doping on the microwave dielectric properties and magnetic properties of YIG

To investigate the crystal structure, electrical properties, and magnetic properties of Ca–Sn co-doped Y_3-xCa_xFe_5-xSn_xO₁₂ (x = 0.00–0.25 in steps of 0.05), solid-state reaction experiments, first principles calculations, and complex crystal bonding theoretical calculations were performed. The relative permittivity (ε_r) is strongly correlated with the average bond ionicity when Ca²⁺ is added. Furthermore, appropriate Sn⁴⁺ substitution significantly lowers the dielectric loss (tanδ_ε) associated with the lattice energy. The right amount of Ca–Sn co-doping can change the saturation magnetization (4πM_S) and improve the microscopic morphology of YIG, lowering the ferromagnetic resonance linewidth (ΔH) of YIG. The optimized microwave dielectric and magnetic properties are as follows: ε_r = 14.7, tanδ_ε = 4.15 × 10^?4, 4πM_S = 1680 G, and ΔH = 53 Oe for Y_2.8Ca_0.2Fe_4.8Sn_0.2O₁₂ sintered for 6 h at 1425 °C. Based on this material, a simple 3D model of a strip-line circulator with an insertion loss of less than 0.3 dB at each port and isolation greater than 20 dB in the 10–12 GHz range was developed, indicating the potential of the material for microwave high-frequency components such as circulators.     

Correlation between structure,dielectric and multiferroic properties of lead free Ni modified BaTiO3 solid solution

Present study highlights the influence of Ni doping on the structural, optical, dielectric, ferroelectric and magnetic properties of nanocrystalline BaTi_1-xNi_xO₃ (0 ≤ x ≤ 0.06) ceramics synthesized by sol-gel auto combustion process. Phase identification and crystal structure are examined through Rietveld refinement analysis that ensures mono-phase nature with tetragonal crystal structure in P4mm space group. The observed variation in the structural parameters viz. lattice constants, unit cell volume, bond lengths (Ti-O) and bond angles (Ti-O-Ti) are the direct evidence of distortion produce in the unit cell under the effect of Ni doping. The FTIR studies confirm perovskite structure and presence of stretching/bending vibrations of the various bands present in the samples. The optical properties divulge a minor alteration in optical bandgap under the influence of Ni content. Dielectric studies reveal higher value of the dielectric constant for pristine sample in the low frequency region, but its value decreases on Ni doping. The dielectric response, analyzed through UDR model, exhibits deviation from linear behavior at higher frequencies. Ferroelectric measurements demonstrate that the pristine sample has higher values of remnant polarization (P_r) and maximum polarization (P_m) which decrease linearly with the increase in Ni doping. Magnetic hysteresis loops at room temperature establish a weak ferromagnetic nature of the samples that arises due to the carrier-mediated exchange interactions with smaller values of magnetic parameters. These investigations ensure that the ferromagnetism can be induced in BaTiO₃ by appropriate doping of Ni ions, which may find their potential use in the field of multiferroics.     

Role of Mn doping on magnetic properties of multiferroic NiCr2O4 nanoparticles

The structural and magnetic properties of Mn doped Nickel Chromite (Ni_1-xMn_xCr₂O_4, x = 0, 0.2, 0.3, 0.4, 0.6, 0.8) nanoparticles (NPs) were studied in detail. The X-ray diffraction analysis affirms normal spinel structure for all the samples and average crystallite size was found in the range 31–58 nm. The spinel structure of these nanoparticles was also confirmed by Fourier transform infrared spectroscopy which revealed the formation of tetrahedral and octahedral vibrational bands in the range 607 -628 cm^?1 and 486 - 491 cm^?1, respectively. Transmission electron microscopy images depicts less agglomerated and non-spherical shaped NPs. The temperature dependent zero field cooled and field cooled magnetic measurements revealed a paramagnetic to ferrimagnetic transition T_c at 87 K for NiCr₂O₄ NPs, which is shifted to low temperatures by Mn doping. This effect was attributed to cationic distributions between adjacent sites produced by Mn doping. M ? H loops of Ni_1-xMn_xCr₂O₄ NPs revealed enhanced saturation magnetization with increase in Mn doping which is attributed to a large magnetic moment of Mn ions. Ni_1-xMn_xCr₂O₄ (x = 0.6 and 0.8) NPs show steps in their M ? H loops because of exchange interactions between two sites of these NPs.     

First-principles study of the stability,electronic and mechanical properties of Cr2N and CrN with the variation of Ni doping concentration

First-principles approach was applied to investigate the stability, electronic and mechanical properties of Cr_2-xNi_xN (x = 0, 0.083, 0.167,0.250, 0.333) and Cr_1-xNi_xN (x = 0,0.125,0.25,0.375, 0.5). The calculated formation enthalpy and mechanical stability results show that Cr_2-xNi_xN and Cr_1-xNi_xN are all stable. The bulk, shear and Young's modulus results indicate that different variation trend is observed in Cr_2-xNi_xN and Cr_1-xNi_xN with the increase of x. Base on Pugh and Pettifor criteria, Cr₂N belongs to the brittle area and the ductility of Cr_2-xNi_xN increases with the increment of x, obtain the maximum results when x = 0.333. However, CrN, which belongs to the ductile area, alloying with Ni decreases its ductility and increases its brittleness, reach the maximum brittleness when x = 0.5. The charge density difference study reveals that the doped Ni atom affects the interaction between Cr and N in Cr_2-xNi_xN and Cr_1-xNi_xN differently. Furthermore, the stress-strain curve of Cr₂N, Cr_1.833Ni_0.167N, and Cr_1.667Ni_0.333N under shear and tensile deformation shows that the ultimate stress of Cr₂N is decreased and its ductility increased. Nevertheless, the stress-strain curve of CrN, Cr_0.75Ni_0.25N, and Cr_0.5Ni_0.5N under shear and tensile deformation indicates that the strength of CrN can be enhanced and its deformation process is significantly changed when x = 0.25.     

Effect of Ni substitution on the microwave dielectric properties of cordierite

Cordierite (Mg₂Al₄Si₅O₁₈) is one of the silicates with low dielectric constant (ɛ_r), which are expected for good candidate of millimeter wave dielectrics. Microwave dielectric properties of Ni substituted cordierite solid solutions; (Mg_1−xNi_x)₂Al₄Si₅O₁₈ have been investigated. (Mg_1−xNi_x)₂Al₄Si₅O₁₈ with no secondary phase was obtained in the compositions x range from 0 to 0.1. It was found that a very small amount of Ni substitution was effectively increased of the quality factor (Qf) value and the highest Qf value of 99,110 GHz was obtained in the composition x = 0.1. No remarkable composition dependence of the temperature coefficient of resonance frequency (τ_f) was observed in the range from x = 0.05 to 0.2, On the other hand, τ_f abruptly shifted toward negative value with increasing x from 0.3 to 0.5. The correlation between the crystal structure of cordierite and the microwave dielectric properties, particularly Qf is discussed.     

Improvement of microwave dielectric properties of the LiNb0.6Ti0.5O3 M-phase by doping with (Co1/3Nb2/3)4+

Structural evolution and microwave dielectric properties of LiNb_0.6(Ti_1-x[Co_1/3Nb_2/3]_x)_0.5O₃ (.05≤x≤.2) ceramics have been studied in this paper. Although the doped compositions maintain the M-phase solid solutions, compositional fluctuation due to nonuniform dispersion of minor dopants could be observed as x < .05, and trace amount of Li₂TiO₃-based solid solution (Li₂TiO₃ss) secondary phase presents in the x > .05 compositions. The microwave dielectric properties could be remarkably improved by the doping of (Co_1/2Nb_1/2)⁴⁺ in comparison to the undoped counterpart. Optimized microwave dielectric properties with Q × f = ∼6500 GHz, ε_r = ∼74 and τ_f = +8.2 ppm/°C could be obtained at x = .10 after sintering at 1050°C/2 h. The sintering temperature could be further reduced to 900°C/2 h by adding .2 wt% B₂O₃ without affecting significantly its microwave dielectric properties: ε_r = 73, Q × f = 6000 GHz, τ_f = +8.5 ppm/°C. The LiNb_0.6(Ti_1-x[Co_1/3Nb_2/3]_x)_0.5O₃ ceramics obtained in this case exhibit large dielectric permittivity coupled with much improved Q × f values, near zero τ_f, and low sintering temperature simultaneously, which makes it a promising high-k microwave dielectric material for low temperature cofired ceramic applications.     

Boosting the antimicrobial and Azo dye mineralization activities of ZnO ceramics by enhancing the light-harvesting and charge transport properties

Herein, we report the wet-chemical synthesis of a ferromagnetic nickel-doped ZnO (Zn_1-xNi_xO) nanocatalyst as a novel and visible-light-driven photocatalyst. Through X-ray diffraction, UV/Vis absorption, electronic studies, and current-voltage experiments, the effect of the ferromagnetic nickel dopant on the structural, optical, morphological, and electrical properties of the synthesized Zn_1-xNi_xO nanocatalyst was studied. The Ni-doping introduced the structural variation in the Zn_1-xNi_xO nanocatalyst, exhibiting a visible light-triggered optical band gap of 2.96 eV and an excellent current conductivity of 6.3 × 10⁻⁴ Sm⁻¹. Moreover, the synthesis of the Zn_1-xNi_xO catalyst at the nanoscale enhanced its surface energy, showing a robust affinity to stick with the dye and pathogenic microbes. The synergistic effects of all the mentioned features enable our Zn_1-xNi_xO nanocatalyst to efficiently generate and transport reactive oxygen species (ROS) under visible light illumination. Regarding antibacterial action, the as-synthesized Zn_1-xNi_xO nanocatalyst showed 1.7% higher activity against E. coli than that of the drug Ciprofloxacin. In addition, doped nanocatalysts mineralize almost 97% of the Allura red dye in just 80 min with a constant rate value of 0.036 min⁻¹. The impedance study and post-application XRD proposed that our Zn_1-xNi_xO nanocatalyst has good conductivity and structural stability. Applications studies show the unusual photocatalytic activity of as-synthesized Zn_1-xNi_xO nanocatalysts, which makes it a suitable candidate for industrial discharge treatment applications at the expense of solar light.     

Nanostructured quaternary Ni1-xCuxFe2-yCeyO4 complex system: Cerium content and copper substitution dependence of cation distribution and magnetic-electric properties in spinel ferrites

Quaternary Ni_1-xCu_xFe_2-yCe_yO₄ complex nano-ferrites system with different cerium content ratio and copper substitution degree were synthesized via co-precipitation wet chemical technique. The newly obtained nanoparticles, with general formula Ni_1-xCu_xFe_2-yCe_yO₄ (where x = 0.0, 0.3, 0.6 and y = 0.00, 0.03, 0.05, 0.08 and 0.10) were heated up to 600 °C to stabilize the specific crystalline spinel structure. The limit of cerium content was quantitively determined to be around 0.08 and up to 0.10. Furthermore, the powders were pelletized in a 13 mm wide pellets and thermally treated at 950 °C. The thermal treatment affected even more the phases segregation process, as CeO₂ was identified in the sample with lowest degree of cerium insertion – 0.03. Also, a difference in color and size of pelletized samples was noticed after the 950 °C thermal treatment. The Rietveld refinement, crystal structure confirmation, morphology magnetic and electrical properties of samples have been deeply studied. The cation distribution carried out from Rietveld refinement confirms the occupancy of (Fe³⁺) on tetrahedral sites and [Ni²⁺], [Cu²⁺], [Fe³⁺] and [Ce²⁺] on octahedral sites in the crystal lattice. Preliminary information regarding the cation distribution in spinel structures were suggested by FTIR spectral results, precisely in the 650-520 cm^?1 region, as a consequence of peak shape and lack of shiftiness of M^Td – O bond. Spherical-shaped quaternary nano-ferrites of 17–28 nm were determined from FE-SEM analysis and the samples composition was confirmed by EDX analysis. Hysteresis loops shows modifications in coercivity, magnetization and magnetic remanence with Ni²⁺ and Cu²⁺ ions doping in Ni_1-xCu_xFe_2-yCe_yO₄ complex systems with typical ferrimagnetic behavior. Dielectric measurements were employed in order to determine the electrical permittivity, dielectric losses and conductivity values in a 10 Hz – 1 MHz frequency range.     

Extended X-ray absorption fine structure,X-ray diffraction and Raman analysis of nickel-doped Ba(Mg1/3Ta2/3)O3

Raman, X-ray diffraction and extended X-ray absorption fine structure (EXAFS) measurements of xBa(Ni_1/3Ta_2/3)O₃ + (1 − x)Ba(Mg_1/3Ta_2/3)O₃ samples with x = 0–0.03 were performed to reveal the nickel doping effect on the microwave properties. EXAFS result clearly shows that the nickel is located on the Mg lattice site. We also found that, as the nickel concentration increases, microwave dielectric constant decreases with the TaO and NiO bond distances. X-ray diffraction shows that the 1:2 ordered structure is degraded with the increasing of nickel concentration. The stretching phonon of the TaO₆ octahedra, that is A_1g(O) phonon near 800 cm⁻¹, are strongly correlated to the microwave properties of xBa(Ni_1/3Mg_2/3)O₃ + (1 − x)Ba(Mg_1/3Ta_2/3)O₃ samples. The large Raman shift and the large width of the A_1g(O) imply rigid but distorted oxygen octahedral structure, therefore, the effect of nickel doping lowers the dielectric constant and the Q × f value of Ba(Mg_1/3Ta_2/3)O₃ ceramic.     

Impact of Dy on structural,dielectric and magnetic properties of Li-Tb-nanoferrites synthesized by micro-emulsion method

A series of Dy-doped Li–Ni ferrites of the following composition Li_0.5Ni_0.48Tb_0.02Dy_xFe_2−xO₄ (0.2≤x≥0) was synthesized by the microemulsion method. The X-ray diffraction (XRD) analysis indicated that Li_0.5Ni_0.48Tb_0.02Dy_xFe_2−xO₄nano-crystalline ferrites exhibited the single-phase spinel structure. The lattice parameter was determined by the Nelson-Riley refinement technique and it increased by increasing the Dy contents. The crystallite size was computed from the Debye Scherrer's formula and it was in range from 27 to 40 nm. The thermal decomposition process was studied by the thermogravimetric analysis and the annealing temperature observed was 980 °C. The real and complex parts of dielectric constant decreases very sharply in the lower frequency region, but in the higher frequency region, the real and complex part of dielectric constant show variable values with Dy contents. The dielectric tangent loss (tan δ) decreases exponentially with Dy contents. The magnitude of the ac conductivity decreases in certain frequency region, as the Dy contents are increased. The possible mechanisms contributing to the above behavior are discussed. The results of these nanocrystalline ferrites are very suitable materials for microwave device applications.     

Dielectric and magnetic properties of (Pb,Ti) co-doped BiFeO3 multiferroic ceramics

In this study, Bi_0.9Pb_0.1Fe_1-xTi_xO₃ (0.05 ≤ x ≤ 0.20) multiferroic ceramics were prepared through solid-state reaction. The influence of Pb, Ti partial substitutions on the dielectric and magnetic properties of BiFeO₃ multiferroic ceramics was investigated and discussed in detail. X-ray diffractions confirm rhombohedral perovskite phase formation (R3c space group). Scanning electron microscopy (SEM) was employed to investigate the morphology, revealing a cuboidal microstructure with bimodal distribution of grain sizes. Magnetic studies were carried out and the results reveal a slight enhancement of saturation magnetization with Ti concentration increasing. The present data indicates that Bi_0.9Pb_0.1Fe_1-xTi_xO₃ can be used as multifunctional material in different magnetoelectric applications.     

Structural dependence of microwave dielectric properties in ilmenite-type Mg(Ti1-xNbx)O3 solid solutions by Rietveld refinement and Raman spectra

Mg(Ti_1-xNb_x)O₃ (x = 0–0.09) ceramics were prepared by the conventional solid-state reaction method. The phase composition, sintering characteristics, microstructure and dielectric properties of Ti⁴⁺ replacement by Nb⁵⁺ in the formed solid solution Mg(Ti_1-xNb_x)O₃ (x = 0–0.09) ceramics were systematically studied. The structural variations and influence of Nb⁵⁺ doping in Mg(Ti_1-xNb_x)O₃ were also systematically investigated by X-ray diffraction and Raman spectroscopy, respectively. X-ray diffraction and its Rietveld refinement results confirmed that Mg(Ti_1-xNb_x)O₃ (x = 0–0.09) ceramics crystallised into an ilmenite-type with R-3 (148) space group. The replacement of the low valence Ti⁴⁺ by the high valence Nb⁵⁺ can improve the dielectric properties of Mg(Ti_1-xNb_x)O₃ (x = 0–0.09). This paper also studied the different sintering temperatures for Mg(Ti_1-xNb_x)O₃ (x = 0–0.09) ceramics. The obtained results proved that 1350 °C is the best sintering temperature. The permittivity and Q × f initially increased and then decreased mainly due to the effects of porosity caused by the sintering temperature and the doping amount of Nb₂O₅, respectively. Furthermore, the increased Q × f is correlated to the increase in Ti–O bond strength as confirmed by Raman spectroscopy, and the electrons generated by the oxygen vacancies will be compensated by Nb⁵⁺ to a certain extent to suppress Ti⁴⁺ to Ti³⁺, which was confirmed by XPS. The increase in τ_f from ?47 ppm/°C to ?40.1 ppm/°C is due to the increment in cell polarisability. Another reason for the increased τ_f is the reduction in the distortion degree of the [TiO₆] octahedral, which was also confirmed by Raman spectroscopy. Mg(Ti_0.95Nb_0.05)O₃ ceramics sintered at 1350 °C for 2 h possessed excellent microwave dielectric properties of ε_r = 18.12, Q × f = 163618 GHz and τ_f = ?40.1 ppm/°C.     

Tuning of dielectric properties in Ti-Doped granular HfO2 nanoparticles for high-k applications

An array of titanium (Ti) doped HfO₂ [(Hf_1-xTi_xO₂) (x = 0.0–1.0)] nanoparticles (NPs) synthesis and the study of their structural, spectroscopic, and dielectric properties is reported. The Hf_1-xTi_xO₂ NPs were synthesized by a sol-gel type wet chemical process. The crystal structure of pure HfO₂ and TiO₂ NPs revealed by structural analysis is monoclinic (m) and tetragonal (t), respectively. The crystallinity of the doped samples was found to be dopant concentration-dependent. The microstructure of the obtained NPs was investigated along with their spectroscopic and dielectric characteristics. The tunable dielectric properties of Hf_1-xTi_xO₂ NPs make them ideal for high frequency, high-k applications.