共查询到20条相似文献,搜索用时 733 毫秒
1.
CL20具有能量密度高,感度适中,热稳定性等特性,是一种有潜力的高能量密度材料。本文综述了CL20的结构,性能和合成。 相似文献
2.
概述了高能量密度材料对于各种弹药和推进系统的重要作用以及开发研究高能量密度材料的重要意义。简要介绍了高能量密度材料研究的近期进展。对国内高能量密度材料的开发研究提出了看法和建议。 相似文献
3.
美国研制新一代高能量密度材料(HEDM)美国一直非常重视新一代高能量密度材料(HEDM)的研究开发,以供未来军事和航天应用。据透露最近已取得了一些惊人的进展。这些先进的高能量密度材料有可能从概念达到实用。第一种有希望的高能量密度材料是二硝基胺铵盐(A... 相似文献
4.
高能量密度材料研究进展及展望 总被引:1,自引:0,他引:1
概述了高能量密度材料对于各种弹药和推进系统的重要作用以及开发研究高能量密度材料的重要意义。简要介绍了高能量密度材料研究的近期进展。对国内高能量密度材料的开发研究提出了看法和建议。 相似文献
5.
TNAZ具有能量密度高,热稳定性好,不吸潮等特性,感度与RDX和HMX相当,是一种有潜力的高能量密度材料。本文综述了TNAZ的性能和国外研究进展。 相似文献
6.
概述了高能量密度材料在武器系统中的应用以及合成研究的主要目标。认为近年来高能量密度材料主要集中在多硝基氮杂环化合物的研究,提出多硝基多环笼形化合物是高能量密度材料合成研究的一个有希望的新领域。介绍了高能量密度材料在这些领域中的研究概况及最新进展。 相似文献
7.
高能量密度材料合成的研究进展 总被引:2,自引:0,他引:2
概述了高能量密度材料在武器系统中的应用以及合成研究的主要目标。认为近年来高能量密度材料主要集中在多硝基氮杂环化合物的研究,提出多硝基多环笼形化合物是高能量密度材料合成研究的一个有希望的新领域。介绍了高能量密度材料在这些领域中的研究概况及最新进展。 相似文献
8.
锂硫(Li-S)电池因其超高的理论能量密度(2600 Wh·kg-1)有望成为下一代高能量密度电池的候选者之一。然而,它存在硫利用率低、容量衰减快以及多硫化锂(LiPSs)发生“流失效应”等问题,这使得Li-S电池反应动力学缓慢,严重限制了其实际应用。物理限制、化学吸附等方法可以加速硫、LiPSs和Li2S之间的氧化还原反应,减少LiPSs的流失,加速动力学过程,使电池具有高能量密度和长循环稳定性。基于整体电化学反应过程,对近些年使用的材料如何促进动力学进程、阻止LiPSs的流失,以及相应策略的评价进行了综述,以指导提升电池动力学性能的合理设计和Li-S电池的实际应用。 相似文献
9.
11.
本文针对目前土木工程中最新出现的混杂纤维树脂基复合材料梁,以3组不同碳纤维含量的混杂纤维拉挤型材薄壁梁构件作为研究对象,通过模型试验、有限元数值分析和理论分析进行对比。研究表明,与相同截面玻璃钢相比,上下翼缘采用碳纤维增强的混杂纤维拉挤型材抗弯刚度有明显提高,但是抗剪切变形能力提高有限。在进行混杂纤维树脂基复合材料梁的挠度计算时须采用考虑横向剪切变形对挠度影响的铁木辛柯梁理论。 相似文献
12.
以3根粘砂碳纤维聚合物筋混凝土梁和2根粘砂玻璃纤维聚合物筋的试验为依据,分析了纤维聚合物筋混凝土梁的挠度变形和破坏形式,以及界限配筋率和正截面承载力;并结合我国混凝土结构设计规范对梁的正截面承载力计算公式进行了推导。试验结果表明:该公式可以用来对纤维聚合物筋混凝土梁的正截面承载力进行预测。 相似文献
13.
介绍了国外某600 t/d级浮法玻璃熔窑的池底钢结构情况。其特点是:不设主横梁,只设池底纵向的主梁和横向的次梁,次梁之上满铺5 mm厚度的钢板。分别对池底次梁、池底主梁、立柱托梁进行了受力分析,并对每种梁所需截面特性进行了计算,确定了每种梁的横断面尺寸。 相似文献
14.
大型塔器支撑装置的优化设计(上) 总被引:3,自引:2,他引:1
塔器硬件系列优化是塔器全面优化的重要组成部分。其中大型塔器系列支撑装置的优化势在必行。积多年来数十座塔器改造与设计的经验和教训,归纳并总结了大型塔器所用工字钢梁系列、栅梁系列和桁架梁系列主梁的结构及性能特点,指出了强度核算方法。比较了规整填料塔、散装填料塔及板式塔新型主梁及支撑装置与常规主梁及支撑装置的优缺点。列举了系列支撑装置的优化设计实例。推荐填料主梁采用栅梁;工字钢梁宜支撑各种液体分布器;大型塔盘宜采用复合桁架梁或空间网架梁。 相似文献
15.
16.
17.
Claus Daniel Beth L. Armstrong Jane Y. Howe Narendra B. Dahotre 《Journal of the American Ceramic Society》2008,91(7):2138-2142
Tape-cast pseudo-cubic zirconia pellets were surface irradiated by two coherent interfering high-power short-pulse Nd:YAG laser beams. The interfering beams of the third harmonic with a wavelength of 355 nm of a 2.5-ns Q-switched laser produced a line-like intensity distribution with a periodic distance of 3.3 μm due to the selected angle between the beams. The resulting nonuniform surface heating produced a microstructure consisting of ultrafine-grained zirconia with a grain size of about 10 nm within the top 100–200 nm depth of the treated surface region due to the high cooling rates during short-pulse laser processing (up to 1010 K/s). The surface morphology closely followed the microperiodic heat treatment provided by the interfering laser beams. The pore size distribution within the periodic surface morphology ranged from a few nanometers to a maximum of half of the periodic line distances. 相似文献
18.
Martin Jensen Long Zhang Ralf Keding Yuanzheng Yue 《International Journal of Applied Glass Science》2011,2(2):137-143
Homogeneity of glasses is a key factor determining their physical and chemical properties and overall quality. However, quantification of the homogeneity of a variety of glasses is still a challenge for glass scientists and technologists. Here, we show a simple approach by which the homogeneity of different glass products can be quantified and ranked. This approach is based on determination of both the optical intensity and dimension of the striations in glasses. These two characteristic values are obtained using the image processing method established recently. The logarithmic ratio between the dimension and the intensity is used to quantify and rank the homogeneity of glass products. Compared with the refractive index method, the image processing method has a wider detection range and a lower statistical uncertainty. 相似文献
19.
外贴玻璃钢板加固混凝土梁弯曲试验研究 总被引:2,自引:2,他引:0
对10根粘贴不同长度和厚度玻璃钢板加固的混凝土梁进行静载试验研究,探讨玻璃钢板尺寸对加固混凝土梁加固效果的影响,试图找到在满足加固要求的前提下的最佳玻璃钢板粘贴尺寸,为合理地对外贴玻璃钢板等复合材料加固混凝土梁进行设计提供了试验数据.结果表明,玻璃钢板粘贴尺寸不同,加固混凝土梁的开裂弯矩、极限弯矩、跨中挠度、跨中应变均有较大变化.通过分析这些变化,推算出玻璃钢板最佳粘贴尺寸. 相似文献
20.
Fiona Spirrett Kyriaki Corinna Datsiou Marlin Magallanes Ian Ashcroft Ruth Goodridge 《Journal of the American Ceramic Society》2023,106(1):227-240
Novel glass processing by powder-fed directed energy deposition was explored as a method of adding glass décor to glass surfaces and bottles. Consistent, semitransparent, single-line tracks of soda lime silica glass could be processed onto glass substrates of the same composition, without significant cracks forming in the substrate. A suitable processing window was found with laser power and scan speed showing independent effects on processing. Consideration of processing surface conditions and reduction of laser transmission through transparent substrates was necessary, and the use of an adhesive tape layer aided adhesion of glass feedstock to substrate surfaces. The work demonstrates the potential for a one-step method of glass bottle decoration for the packaging industry, with scope to create 3D designs of high geometric complexity and customizability on glass substrates, thereby adding value to glass packaging by brand differentiation without the high costs associated with molds and tooling. 相似文献