The electrical properties of (1−x)(Bi0.5Na0.5TiO3–Bi0.5K0.5TiO3–BaTiO3)–xCaZrO3 lead-free piezoelectric ceramics

Lead-free (1−x)(0.0852Bi_0.5Na_0.5TiO₃–0.12Bi_0.5K_0.5TiO₃–0.028BaTiO₃)–xCaZrO₃ piezoelectric ceramics (BNT−BKT−BT−xCZ, x=0, 0.01, 0.02, 0.03, 0.04 and 0.05) were prepared by using a conventional solid-state reaction method. The effects of CZ-doping on the structural, dielectric, ferroelectric and piezoelectric properties of the BNT−BKT−BT−xCZ system were systematically investigated. The polarization and strain behaviors indicated that the long-range ferroelectric order in the unmodified BNT−BKT−BT ceramics was disrupted by the increase of CZ-doping content, and correspondingly the depolarization temperature (T_d) shifted down from 109 °C to below room temperature. When x>0.03, accompanied with the drastic decrease in the remnant polarization (P_r) and piezoelectric coefficient (d₃₃), the electric-field-induced strain was enhanced significantly. A large unipolar strain of 0.35% under an applied electric field of 70 kV/cm (S_max/E_max=500 pm/V) was obtained in the BNT−BKT−BT−0.04CZ ceramics at room temperature, which was attributed to the reversible electric-field-induced phase transition between the relaxor and ferroelectric phases.     

Structural properties of multiferroic 0.5BiFeO3–0.5Pb(Fe0.5Nb0.5)O3 solid solution

Magnetoelectric multiferroics are very promising materials because of their practical applications and fundamental interests. The most widely studied magnetoelectric oxides are ABO₃ perovskites. In the paper structural properties of BiFeO₃ and Pb(Fe_0.5Nb_0.5)O₃ solid solution are described. The material crystallizes in rhombohedral R3c crystal structure which parameters are presented. Mössbauer spectroscopy was used to study local changes in an iron environment due to Fe/Nb substitution and hyperfine interaction parameters of different local surroundings of iron atoms are presented. The random distribution of B-site sublattice cations was confirmed. Ab initio calculations of the studied solid solution were conducted and theoretical crystal structure parameters were compared with the experimental data. The theoretical magnetic and electric properties are discussed. The local iron magnetic moments were estimated and their dependence on the local surrounding changes is shown. The calculated electrons densities and Bader's topological analysis were used to describe chemical bonding properties.     

Na0.5Bi0.5TiO3–K0.5Bi0.5TiO3–BaTiO3–SrTiO3陶瓷的准同型相界与电性能

采用固相法制备了 Na0.5Bi0.5TiO3–K0.5Bi0.5TiO3–BaTiO3–SrTiO3（NBT–KBT–BT–ST）陶瓷,该体系是按（1–2x）（0.8NBT–0.2KBT）–x（0.94NBT–0.06BT）–x（0.74NBT–0.26ST） （x = 0.10、0.20、0.25、0.30、0.35、0.40、0.45）组合而成的,研究了该系陶瓷的结构与电性能。结果表明：所有样品都处于三方–四方准同型相界区域。该系陶瓷在准同型相界附近表现出了优异的压电性能,压电常数 d33、机电耦合系数 kp和剩余极化强度 Pr随 x 的增加先升高后降低,其中 x=0.35 陶瓷的电性能最佳：d33= 210 pC/N,kp= 0.319,Pr= 39.3 μC/cm2,Ec= 20.2 kV/cm,是一种良好的无铅压电陶瓷候选材料。依据准同型相界组成的线性组合规律来寻找具有优异压电性能的 NBT–KBT–BT–ST 陶瓷准同型相界组成是可行的。     

Structure,dielectric and ferroelectric properties of 0.92Na0.5Bi0.5TiO3–0.06BaTiO3–0.02K0.5Na0.5NbO3 lead-free ceramics: Effect of Co2O3 additive

0.92Na_0.5Bi_0.5TiO₃–0.06BaTiO₃–0.02K_0.5Na_0.5NbO₃+x wt% Co₂O₃ (NBKT–xCo, x=0, 0.2, 0.4, 0.6, 0.8) lead-free ferroelectric ceramics were prepared via a conventional solid state reaction method. Effects of Co₂O₃ additive on crystallite structure, microstructure, dielectric and ferroelectric properties of the NBKT–xCo ceramics were studied. X-ray diffraction results showed that the rhombohedral–tetragonal morphotropic phase boundary existed in all the ceramics, with relative amount of tetragonal phase varying with the content of Co₂O₃. Average grain size, maximum value of dielectric constant, Curie temperature and ferroelectric properties of the ceramics were close related to the content of Co₂O₃. The dielectric anomaly caused by the phase transition between the ferroelectric phase and the so-called “intermediate phase” was observed in the ceramics with x≤0.2, while it disappeared with further increasing x. All the ceramics showed a diffuse phase transition between the “intermediate phase” and the paraelectric phase. The change in the ferroelectric properties with changing the content of Co₂O₃ was discussed by considering the competitive effects among grain size, relative amount of the tetragonal phase and oxygen vacancies.     

Structural,dielectric and piezoelectric properties of (Bi0.5Na0.5)TiO3–(Bi0.5K0.5)TiO3–Bi(Zn0.5Ti0.5)O3 thin films prepared by sol–gel method

Lead free (1−x)(0.8Bi_0.5Na_0.5Ti_0.5O₃–0.2Bi_0.5K_0.5TiO₃)–xBiZn_0.5Ti_0.5O₃ (x=0–0.06) (BNT–BKT–BZT) thin films were deposited on Pt(111)/Ti/SiO₂/Si(100) substrates by a sol–gel processing technique. The effects of BZT content on the structural, dielectric, ferroelectric and piezoelectric properties of the BNT–BKT–BZT thin films were investigated systematically. The BNT–BKT–BZT thin films undergo a transition from ferroelectric to relaxor phase with increasing temperature. The phase transition temperature decreases with the increase of BZT content. The BNT–BKT–BZT thin film with x=0.04 exhibits the best ferroelectric properties (P_max=40 µC/cm² and P_r=10 µC/cm²), largest dielectric constant (ε=560) and piezoelectric constant (d₃₃=40 pm/V). This finding demonstrates that the BNT–BKT–BZT thin film has an excellent potential for demanding high piezoelectric properties in lead free films.     

Structure and microwave dielectric properties of La(Mg0.5Ti0.5)O3–CaTiO3 system

(1−x)La(Mg_0.5Ti_0.5)O₃ (LMT)–xCaTiO₃ (CT) [0<x<1] ceramics were prepared from powder obtained by a nonconventional chemical route based on the Pechini method. The crystal structure of the microwave dielectric ceramics has been refined by Rietveld method using X-ray powder diffraction data. LMT and CT were found to form a solid solution over the whole compositional range. The 0.9LMT–0.1CT composition was refined using P2₁/n space group, which allows taking into account B-site ordering. The compounds having x⩾0.3 were found to be disordered and were refined using Pbnm space group. Microstructure evolution was also analysed. Dielectric characterization at microwave frequencies was performed on the LMT–CT ceramics. The permittivity and the temperature coefficient of resonant frequency of the solid solutions showed a non-linear variation with composition. The quality factor demonstrates a considerable decrease with the increase of CT content.     

Effect of WO3 doping on dielectric and ferroelectric properties of 0.94(Bi0.5Na0.5)TiO3–0.06BaTiO3 ceramics

WO₃(0–6 mol%)-doped 0.94Bi_0.5Na_0.5TiO₃–0.06BaTiO₃ lead-free ceramics were synthesized by conventional solid-state reaction. The effect of WO₃ addition on the structure and electrical properties were investigated. The result revealed that a small amount of WO₃ (≤1 mol%) can diffuse into the lattice and does not significantly affect the phase structure, however, more addition will result in distortion and enlargement of the unit cells. The maximum permittivity temperature (T_m) is suppressed dramatically as the dopant increasing, while the depolarization temperature (T_d) fall to the minimum with 1 mol% WO₃ additive. The remanent polarization (P_r) was enhanced and coercive field (E_c) was reduced by doping with WO₃. The strain shows the largest value for 1 mol% doped sample, which is due to a field-induced antiferroelectric–ferroelectric phase transition.     

Bi0.5K0.5TiO3–CaTiO3 ceramics: Appearance of the pseudocubic structure and ferroelectric-relaxor transition characters

In this study, solid solution ceramics of (1−x)Bi_0.5K_0.5TiO₃–xCaTiO₃ (BKT-CT, x = 0, 0.12, 0.15, 0.18, 0.21, and 0.25) were prepared. A phase transition from the tetragonal symmetry to the pseudocubic symmetry is discovered near x = 0.25. The reasons for the appearance of the pseudocubic phase were discussed. The compositions of x ≤ 0.21 show the ferroelectric ordering at room temperature. The remnant polarization (P_r) is 22.4 μC/cm² for the x = 0.15 composition. The temperature dependence of the relative permittivity suggests two dielectric anomalies for x ≤ 0.18. The dielectric anomaly in the low-temperature range is related to a spontaneous transition between the ferroelectric and relaxor states. The temperature (T_F-R) for the transition decreases with the CT addition, falling from 211°C for x = 0.12-134°C for x = 0.18. Only one relaxor-like dielectric anomaly was observed for x ≥ 0.21. The thin double ferroelectric hysteresis loops have been observed during the ferroelectric-relaxor transition process for x ≥ 0.21. The maximum electrostrain (S_m) reaches 0.155% at 100°C for x = 0.21. The low-temperature Raman measurement suggests the intrinsic tetragonal distortions for x = 0.25.     

Spark plasma sintering of MgAl2O4–YCr0.5Mn0.5O3 composite NTC ceramics

New high temperature negative temperature coefficient (NTC) thermistor ceramics based on a xMgAl₂O₄–(1 − x)YCr_0.5Mn_0.5O₃ (x = 0.1, 0.4, 0.6) composite system have been successfully fabricated through spark plasma sintering (SPS) with a low sintering temperature and a short sintering period. The X-ray diffraction analysis indicates that the SPS-sintered composite ceramics consist of a cubic spinel MgAl₂O₄ phase and an orthorhombic perovskite YCr_0.5Mn_0.5O₃ phase isomorphic to YCrO₃. The SPS-sintered composite ceramics have high relative density ranging from 94.1 to 97.4% of the theoretical density. X-ray photoelectron spectroscopy analysis corroborates the presence of Cr³⁺, Cr⁴⁺, Mn³⁺, and Mn⁴⁺ ions on lattice sites, which may result in the hopping conduction. The obtained ρ₂₅, B_25–150, and B_700–1000 of the SPS-sintered composite NTC thermistors are in the range of 1.53 × 10⁶–9.92 × 10⁹ Ω cm, 3380–5172 K, and 7239–9543 K, respectively. These values can be tuned by adjusting the MgAl₂O₄ concentration.     

Phase–composition and temperature dependence of electrocaloric effect in lead–free Bi0.5Na0.5TiO3–BaTiO3–(Sr0.7Bi0.2□0.1)TiO3 ceramics

The (0.94–x)Bi_0.5Na_0.5TiO₃–0.06BaTiO₃–x(Sr_0.7Bi_0.2□_0.1)TiO₃ (BNT–BT–xSBT, 0 ≤ x ≤ 0.24) solid solution ceramics were synthesized via a conventional solid–state reaction method and the correlation of phase structure, piezoelectric, ferroelectric properties and electrocaloric effect (ECE) was investigated in detail. The ECE in lead–free BNT–BT–xSBT ceramics was measured directly using a home–made adiabatic calorimeter with maximum adiabatic temperature change ΔT = 0.4 K with x = 0.08 under the electric field E = 6 kV/mm at room temperature. The position of maximum ECE was found in the vicinity of nonergodic and ergodic phase boundary, where the maximum change in entropy occurs as a result of the field–induced phase transformation between the ergodic and long–range ferroelectric phase. Besides, the mechanism for the shift of ECE peak is discussed in detail. Finally, the temperature dependence of ECE for BNT–BT–xSBT (x = 0, 0.04 and 0.08) was also investigated. This work may present a guideline for designing BNT–based ferroelectric relaxor ceramics for EC cooling technologies.     

Morphotropic phase boundary and electrical properties of lead-free (K0.5Bi0.5)TiO3–Bi(Ni0.5Ti0.5)O3 relaxor ferroelectric ceramics

Lead-free relaxor ferroelectric ceramics (1?x)(K_0.5Bi_0.5)TiO₃–xBi(Ni_0.5Ti_0.5)O₃ were prepared by a conventional solid-state route, the phase transition behavior and corresponding electrical properties were investigated. A typical morphotropic phase boundary (MPB) between rhombohedral and tetragonal ferroelectric phases was identified to be in the range of 0.05<x<0.07 where the optimum piezoelectric and electromechanical properties of d₃₃=126 pC/N and k_P=18% were achieved. Most importantly, a high Curie temperature ~320 °C, around which the material shows a typical relaxor ferroelectric behavior characterized by the presence of diffuse phase transition and frequency dispersion, was obtained in MPB compositions, significantly higher than those of some existing MPB lead-free titanate systems. These results demonstrate a tremendous potential of the studied system for device applications.     

Ferroelectric and magnetic properties of magnetoelectric (Na0.5Bi0.5)TiO3–BiFeO3 synthesized by acetic acid assisted sol–gel method

The perovskite solid solution system resulting from the combination of Na_0.5Bi_0.5TiO₃ (NBT) and BiFeO₃ (BFO) has been studied for its magnetoelectric properties in BFO-rich phases of the series, using magnetometry and piezoresponse force microscopy (PFM). Raman spectroscopy results confirmed the successful formation of solid solutions having spectral features that are combination of two parent compounds. The solid solutions displayed a variable bandgap in the range 2.12–2.39 eV with composition. The results of PFM suggest an improved spontaneous polarization with the progressive replacement of (Na,Bi)²⁺ and Ti⁴⁺ ions at A- and B-sites of BFO lattice. At the same time room temperature weak ferromagnetic response was seen in mixed compositions. A systematic shift in magnetic transition temperatures from 650 K to 410 K was observed with the increase of NBT content. Magnetoelectric (ME) coefficient of 9 mV/cm-Oe was obtained for 40NBT–60BFO composition. Our studies indicate that NBT–BFO solid solution system is a potentially useful candidate for lead-free single phase ME applications.     

Analysis of the rhombohedral–tetragonal symmetries coexistence in lead-free 0.94(Bi0.5Na0.5)TiO3–0.06BaTiO3 ceramics from nanopowders

Ceramics with perovskite-type structure and 0.94(Bi_0.5Na_0.5)TiO₃–0.06BaTiO₃ (BNBT) composition have been studied by conventional powder X-ray diffraction in Bragg–Brentano geometry. Ceramics were obtained from sol–gel autocombustion nanopowders and processed either by hot pressing and subsequent recrystallisation or pressureless sintering in two steps. These methods provided single-phase, sub-micron grain size (<700?nm), dense ceramics with good piezoelectric performance (96–94% of theoretical density and d₃₃?=?143–124?pC?N^–1, respectively). For the considered ceramics, the splitting of the peaks of the cubic perovskite-type structure with 111 and 200 Miller indices has been repeatedly used as a symmetry identification criterion. In this work a simple, yet powerful, procedure to validate the consistency of the mentioned splitting interpretation is presented. Based on peaks fitting and well-known crystallographic expressions, the rhombohedral and tetragonal symmetries' coexistence is verified. The suggested procedure can be applied to the study of peak splitting in ceramics at Morphotropic Phase Boundaries in a general way. In a given series of BNBT ceramics, inconsistencies for interplanar distances, intensities' ratios and the evolution of these from not-poled to poled samples have been found. In poled ceramics, special care has been taken when carrying out this analysis, due to the anisotropic strains arising from ferroelectric (FE) domain orientation. Poling gives rise to a displacement of the peaks angular positions and modification of the intensity ratios. However, the interplanar distance changes associated with the angular deviations here observed are one order of magnitude higher than those expected from anisotropic strains. These results set up a doubt on the sufficiency of the [rhombohedral?+?tetragonal] model to characterise the considered ceramics. A model of a mesoscopic FE phase with rhombohedral symmetry, a mesoscopic and globally weakly polar phase, with cubic symmetry, and a nanosised phase, also cubic, is presented as a plausible alternative.     

Crystal structure,microstructure and electrical properties of (1−x−y)Bi0.5Na0.5TiO3–xBi0.5K0.5TiO3–yBiFeO3 ceramics near MPB prepared via the combustion technique

(1?x?y)Bi_0.5Na_0.5TiO₃–xBi_0.5K_0.5TiO₃–yBiFeO₃ (BNKFT-x/y with 0.12≤x≤0.24, 0≤y≤0.07) lead-free piezoelectric ceramics have been prepared by the combustion technique. The effects of amounts of x and y on structures and electrical properties were examined. Powders and ceramics can be well calcined and sintered at 750 °C for 2 h and 1025–1050 °C, respectively. The results indicated that the crystalline structure and microstructure changed with the increase of x and y concentrations. XRD results of BNKFT-x/0.03 and BNKFT-0.18/y ceramics with 0.12≤x≤0.24 and 0≤y≤0.07 showed the rhombohedral–tetragonal morphotropic phase boundary (MPB). The addition of y caused a promoted grain growth while the addition of x suppressed the grain growth. The highest density (ρ=5.85 g/cm³), superior dielectric properties at T_c (ε_r=7846 and tan δ=0.02), remnant polarization measured at 40 kV/cm (P_r = 20.1 μC/cm²) and piezoelectric coefficient (d₃₃=213 pC/N) were obtained for x=0.18 and y=0.03.     

Tunable photoluminescence properties of Pr3+/Er3+-doped 0.93Bi0.5Na0.5TiO3–0.07BaTiO3 low-temperature sintered multifunctional ceramics

Pr³⁺/Er³⁺-doped 0.93Bi_0.5Na_0.5TiO₃–0.07BaTiO₃ ceramics have been fabricated at a low sintering temperature of 960°C using a sintering aid of Li₂CO₃. The effects of energy transfer between Pr³⁺and Er³⁺on their photoluminescence properties have been investigated. Our results reveal that the down-conversion emissions of Pr³⁺are weakened and the lifetimes are shortened by the co-doping of Er³⁺. As a result, when both Pr³⁺and Er³⁺are excited simultaneously, with increasing the concentration of Er³⁺, the green emissions from Er³⁺increase but the red emissions from Pr³⁺decrease. Moreover, the emission color of the ceramics can be reversibly changed between red, yellow and yellowish green by using excitation sources of different wavelengths. Strong up-conversion green emissions with short lifetimes arisen from Er³⁺have also been observed for the ceramics under the excitation of 980 nm. Owing to the Li₂CO₃ sintering aid, the low-temperature sintered ceramics also exhibit reasonably good ferroelectric and piezoelectric properties, and hence should be promising for multifunctional applications such as electro-optical coupling devices.     

Synthesis,structural evolution,and dielectric properties of a new perovskite solid solution (Pb0.5Sr0.5)(Zr0.5Ti0.5)O3–PbTiO3

To explore lead-reduced dielectric materials in the SrTiO₃–PbTiO₃–PbZrO₃ ternary system, a novel solid solution between relaxor ferroelectric (Pb_0.5Sr_0.5)(Zr_0.5Ti_0.5)O₃ and ferroelectric PbTiO₃, namely (1 − x)(Pb_0.5Sr_0.5) (Zr_0.5Ti_0.5)O₃–xPbTiO₃ (lead–strontium–zirconate–titanate [PSZT]–PT), has been synthesized in the perovskite structure by high-temperature solid-state reaction method in the form of ceramics. The crystal structure and phase symmetry of the materials synthesized were analyzed and resolved based on X-ray powder diffraction (XRD) data through both the Pawley and Rietveld refinements. The results of the structural refinements indicate that at low PT-concentration end of the solid solution system, for example, x = 0.05, the PSZT–PT solid solution exhibits a cubic structural symmetry (with the space group Pm-3m). As the PT concentration (x) increases, the structure of (1 − x)PSZT–xPT gradually transforms from the cubic to a tetragonal (P4mm) phase. In the composition range of x = 0.10–0.25, a mixture of the cubic and tetragonal phases was identified. As the concentration of PT increases, the proportion of the tetragonal phase increases at the expense of the cubic phase. For a composition of x > 0.25, a pure tetragonal phase is observed. The dielectric properties of the materials were studied by measuring the permittivity as a function of temperature at various frequencies. For the composition of x = 0.05, the temperature dependence of dielectric constant shows typical relaxor behavior. For x = 0.35, the dielectric peaks indicate a normal ferroelectric phase transition. Overall, a structural transformation from a central-symmetric, nonpolar cubic phase to a non-centrosymmetric, polar tetragonal phase is induced by the substitution of PT for PSZT in the pseudo-binary solid solution of (1 − x)PSZT–xPT, which also reveals an interesting relaxor to ferroelectric crossover phenomenon.     

Phase transition behavior and electrical properties of lead-free (Bi0.5K0.5)TiO3–LiNbO3 relaxor ferroelectric ceramics

(1?x)(Bi_0.5K_0.5)TiO₃–xLiNbO₃ ((1?x)BKT–xLN) lead-free relaxor ferroelectric ceramics were prepared by a conventional solid-state route and their phase transition behavior and the corresponding electrical properties were investigated. A morphotropic phase boundary separating rhombohedral and tetragonal phases was identified in the composition range of 0.015<x<0.03, where the improved electrical properties of piezoelectric constant d₃₃=75 pC/N and electromechanical coupling factor k_p=0.18 were obtained. Moreover, all samples show typical relaxor behavior characterized by the presence of diffuse phase transition and frequency dispersion. It was found that the dielectric relaxation behavior of BKT ceramics can be obviously enhanced with the addition of LN. In addition, the effect of the LN addition on the ferroelectric properties was also investigated by measuring polarization versus electric field hysteresis loops.     

Destabilization of the ferroelectric order in Na0.5Bi0.5TiO3–6 wt% BaTiO3 ceramics through doping

One of the most promising candidates to replace lead-based compounds in actuator applications are Na_0.5Bi_0.5TiO₃ (NBT)-based materials. K_0.5Na_0.5NbO₃ (KNN)-modified NBT-BaTiO₃ (NBT-BT) solid solutions exhibit giant large-signal strain–electric-field coefficients (S_max/E_max) exceeding 500 pm V^?1. However, despite the promising properties of the ceramics reported in the literature, the synthesis of these materials remains challenging, leaving gaps in the understanding of the synthesis-property relationship. In this contribution, we investigate the microstructure and the electrical properties while changing the composition to destabilize the ferroelectric order in the material, which is the key to achieve large strain response. Measurements of dielectric and ferroelectric properties reveal that Na- or Ti-deficiency or excess of Bi decrease the ferroelectric-to-relaxor transition temperature and remnant polarization, indicating a destabilization of the ferroelectric order. Additionally, the use of KNO₃ instead of K₂CO₃ as the potassium source in KNN results in an additional destabilizing effect on the ferroelectric order, which can be attributed to better incorporation of K⁺ into the perovskite structure. The results identify the key aspects of the synthesis of NBT-BT-KNN ceramics to obtain high S_max/E_max values.     

Large strains accompanying field-induced ergodic phase-polar ordered phase transformations in Bi(Mg0.5Ti0.5)O3–PbTiO3–(Bi0.5Na0.5)TiO3 ternary system

A composition-induced pseudocubic–tetragonal structural transition was found to be accompanied by a relaxor phase transformation in xBi(Mg_0.5Ti_0.5)O₃–(0.75 − x)PbTiO₃–0.25(Bi_0.5Na_0.5)TiO₃ ternary solid solutions. Dielectric and ferroelectric measurements suggest the coexistence of ergodic and nonergodic relaxor phases within a single pseudocubic phase zone for samples with 0.50 < x < 0.51 where large electromechanical strains of up to 0.43% (S_max/E_max = 621 pm/V) can be generated. The mechanism was mainly ascribed to the accumulated effects of field-modulated continuous and reversible transformations from a pseudocubic ergodic phase to a rhombohedral short-range ordered phase (but not nonergodic polar phase), and finally to a long-range ordered ferroelectric tetragonal phase. These procedures were found to be strongly dependent on the applied field magnitudes. These findings were reasonably approved by a couple of measurements such as dielectric–temperature–frequency spectrum, ferroelectric polarization/strain hysteresis loops, polarization current density curves and particularly ex situ Raman spectrum and in situ high-resolution synchrotron X-ray diffraction.