A monolithic complexed catalyst composed of a piece of Co foam decorated with Ru nanosheets has been fabricated. This catalyst has demonstrated excellent performance in catalyzing NaBH4 hydrolysis under alkaline conditions. Most importantly, the bulky size of the developed catalyst provides convenience to control the start and stop of hydrogen production by manipulating the attachment and detachment between the catalyst and NaBH4 solution. These features endow this catalyst with great potential for on-site hydrogen supply.
Graphic AbstractAn efficient solvent-free catalyst system for hydrosilylation of aldehydes and ketones was developed based on iron pre-catalyst Fe2(CO)9/C6H4-o-(NCH2PPh2)2BH. The reactions were tolerant of many functional groups and the corresponding alcohols were isolated in good to excellent yields following basic hydrolysis of the reaction products. The reaction is likely catalyzed by an in situ generated pincer ligated iron hydride complex.
Graphic AbstractThe magic number clusters Au102(p-MBA)44 and Au144(p-MBA)60 were synthesized and tested for their ability to catalyze the reduction of 4-nitrophenol. Kinetic and thermodynamic analyses demonstrate that both clusters are effective catalysts with activation energies less than 10 kJ/mol and turnover frequencies approaching 103 h–1 per surface gold atom.
Graphic AbstractIn this study, we describe the synthetic of uranyl nitrate ion functionalized MOFs linked by carboxyl, which displays block shape crystals structure. The as-prepared uranyl-MOF has been efficiently utilized as heterogeneous catalyst for selective aerobic oxidation of sulfides under visible-light irradiation. Photochemistry of extended MOFs including uranyl nitrate ion has been examined. The sulfoxidation reaction proceeds with good yields for a large variety of different sulfides. This process is carried out under visible light conditions, methanol as single solvent, and the uranyl-MOF material can be recycled up to five times. Sulfoxidation reaction mainly proceeds through an electron and energy transfer mechanism of oxygen in uranyl nitrate ion.
Graphic AbstractIn this study, we describe the synthetic of uranyl nitrate ion functionalized MOFs. The as-prepared uranyl-MOF was efficiently utilized as heterogeneous catalyst for selective aerobic oxidation of sulfides under visible-light irradiation. Photochemistry of extended MOFs including uranyl nitrate ion has been examined.
In this paper, we have produced carboxylic acids by the oxidation of various alcohols in the presence of CO2 using SBA-15/IL supported Cu(II) (SBA-15/IL/Cu(II)) as nanocatalyst. The obtained products showed to have excellent yields by taking into account of SBA-15/IL/Cu(II) nanocatalyst. In addition, the analysis of EDX, SEM, TGA, TEM, XPS, and FT-IR showed the heterogeneous structure of SBA-15/IL/Cu (II) catalyst. It is determined that, after using SBA-15 excess, the catalytic stability of the system was enhanced. Moreover, hot filtration provided a full vision in the heterogeneous catalyst nature. The recycling as well as reuse of the catalyst were studied in cases of coupling reactions many times. Moreover, we have studied the mechanism of the coupling reactions.
Graphic AbstractThe efficient SBA-15 supported silver catalysts(Ag/SBA-15) were prepared and characterized by ICP-OES, XRD, TEM, SEM, XPS and N2 adsorption–desorption techniques. The catalysts exhibited an excellent catalytic activity for the aerobic oxidation of toluene to benzaldehyde under solvent-free conditions. Conversion of toluene and selectivity of benzaldehyde were 50% and 89% respectively over catalyst with 9.1 wt% Ag loading (10Ag/SBA-15). A wide range of substrates were tolerated under the selected reaction conditions. The kinetic study shows that the oxidation of toluene over 10Ag/SBA-15 is pseudo-first-order reaction and the activation energy Ea is 45.1 kJ/mol. A plausible mechanism involving oxygen free radicals was proposed for the aerobic oxidation reaction. Compared with the traditional method, the newly designed heterogeneous catalytic system shows better economic applicability, environmental friendliness and broader application prospects.
Graphical abstractThis work proposed a new path to synthesize Ni-phyllosilicate through the reaction of nickel hydroxide and silica sol on the surface of Ni-foam to form the monolithic Ni-phyllosilicate/Ni-foam catalyst. Ni-phyllosilicate could reprint the morphology of nickel hydroxid and firmly anchor on the framework of Ni-foam, which obtained fine Ni particles of 2.8 nm after reduction in H2 at 650 °C, resulting in high catalytic activity for CO2 methanation. In addition, the Ni-phyllosilicate/Ni-foam catalyst showed high long-term stability in a 100 h-lifetime test owing to the combined effects of surface confinement of Ni-phyllosilicate, firm anchoring between Ni-phyllosilicate and Ni-foam, as well as the high heat transfer property of Ni-foam.
Graphical AbstractSolid base metal oxide catalysts such as MgO offer utility in a wide variety of syntheses from pharmaceuticals to fuels. The (111) facet of MgO shows enhanced, unique properties relative to the other facets. Carbon coatings have emerged as a promising modification to impart metal oxide catalyst stability. Here, we report the synthesis, characterization, and catalytic properties of commercial MgO, MgO(111), and carbon coated derivatives thereof for 2-pentanone condensation. The dimer and trimer products of this reaction can be used as precursors for biofuels upon oxygen removal and thus have relevance in environmental sustainability. MgO(111) maintained impressive selectivity towards the dimer product after carbon coating, whereas the other catalysts experienced a decrease in conversion and selectivity as a consequence of the carbon coating. Our findings highlight the catalytic efficacy of MgO(111), provide insight into carbon coating for catalyst stability, and pave the way for continued mechanistic investigations.
Graphical AbstractAPO-11 aluminophosphate molecular sieve was prepared by hydrothermal method of aluminum hydroxide with diisopropylamine. Ni–P/APO-11 amorphous alloy catalysts were prepared by chemical reduction method and used for the hydrogenation of α-pinene reaction. The catalysts were characterized by X-Ray photoelectron spectroscopy (XPS), Nitrogen adsorption–desorption isotherms (BET), scanning electron microscope (SEM), transmission electron microscope (TEM) and fourier transform infrared spectrometer (FT-IR).The prepared conditions of the Ni–P/APO-11 catalysts played important roles on the hydrogenation of α-pinene reaction. It was found that the preparation temperature, P/Ni molar ratio and pH value had great influence on the reduction dosage, dispersion and particle sizes of the catalysts, thus affecting the reactivity of the catalysts. The appropriate reaction conditions explored were at 30 °C, n(P/Ni)?=?5 and pH?=?8, obtaining a 90.65% conversion of α-pinene and 97.87% selectivity to cis-pinane. Under these conditions, the catalysts exhibited better repeatability and stability.
Graphic AbstractIn this study, the porous ultrathin graphitic carbon nitride (CN) nanosheets with rich C and nitrogen defects were prepared by one-step calcining the mixture of melamine and glucose (Glu) in air atmosphere (Glu-CN). Introducing simultaneously rich C atoms and nitrogen defects into CN structures continuously modulates the bandgaps from 2.67 to 1.81 eV of CN photocatalysts. Due to large surface area, more active sites, remarkably longer lifetime of charge carriers and adjustable band gap structure, the prepared ultrathin porous CN nanosheets show the enhanced photocatalytic performance for the degradation of methyl orange (MO) under visible light. The degradation efficiency of optimal CN nanosheet photocatalyst for MO is 5.75 times that of bulk CN. This work provides a facile and universal relevance approach to engineer the band structures of CN by introduction of rich C and porous morphology for high-performance photocatalytic, which can provide informative principles for the design of efficient photocatalysis systems for solar energy conversion.
Graphic AbstractVanadium(IV) oxido complex of 1-Phenyl-1,3-butanedione [VIVO(bzac)2] (1) was prepared, characterized, and heterogenized onto APTMS modified graphene oxide, as well as imidazole modified polystyrene beads. Graphene oxide supported complex GO-APTMS-[VIVO(bzac)2] (2) and polymer anchored complex PS-im-[VIVO(bzac)2] (3) were used for the oxidative bromination of a number of small organic molecules and oxidation of a series of thioethers. Both 2 and 3 evolve as excellent heterogeneous catalysts. The nature of solid support does not impact substrate conversion (%) during the oxidative bromination of salicylaldehyde, phenol, or styrene, whereas it influences the substrate conversion (%) as well as the product selectivity (%) during the oxidation of thioethers.
Graphic AbstractZSM-48 and ZSM-22 zeolites with similar Si/Al ratio were synthesized and modified by alkali treatment. Moreover, n-dodecane hydroisomerization performance of Pt supported ZSM-22 and ZSM-48 were investigated. The catalytic results showed that the activity and the isomers selectivity of n-dodecane hydroisomerization could be improved by alkali treatment. The isomers distributions were distinct for Pt/ZSM-48 and Pt/ZSM-22. Mono-branched isomers near the end of the chains were more prone to be generated on Pt/ZSM-22 catalyst, which suggested “pore-mouth” catalysis model dominating the hydroisomerization catalysis. However, di-branched isomers and mono-branched isomers with methyl near the middle of the carbon chains were favorable to be formed over Pt/ZSM-48 catalyst according to the “key-lock” catalysis model. Moreover, more central-branched isomers were formed at high reaction temperature (>?320 °C) especially for Pt/ HZSM-22.
Graphic AbstractIn this research, four cholines supported on core–shell iron oxides, Fe2O3@MgO@Ch.OAc (choline acetate), Fe2O3@MgO@Ch.OH (choline hydroxide), Fe3O4@Ch.OAc, Fe3O4@Ch.OH, were synthesized. The synthesized catalysts were tested in 1,2,3-triazoles synthesis by the reaction of nitromethane, aldehyde, and benzyl azide in EtOH as a green solvent. Among four synthesized heterogeneous catalysts, the Fe2O3@MgO@ch.OAc showed superior catalytic activity for the reaction and afforded the desired triazoles in good isolated yields under mild reaction conditions.
Graphic AbstractCuO–CeO2 (Cu–Ce) catalyst with a CuO/CeO2 mass ratio of 1 prepared by a sol–gel method is used in the CO catalytic oxidation reaction in the actual industrial sulfur-containing atmosphere. At a reaction temperature of 200 °C, the catalyst exhibits quite different stability under sulfur-containing and sulfur-free conditions. When 30 ppm SO2 was added to the feed gas, the Cu–Ce catalyst had an initial CO conversion rate of 100%, gradually decreasing after 26 h, and this catalyst completely deactivated at about 50 h. However, the CO conversion rate of the catalyst under sulfur-free conditions could be nearly maintained at 100% within the measured time range (60 h). The results of IR, Raman, and XPS characterizations proved that the accumulation of cerium sulfate on the Cu–Ce catalyst would cover the active sites of the catalyst, eventually leading to the complete deactivation of the catalyst, which provides favorable evidence for the actual industrial anti-sulfur application.
Graphical AbstractIn order to further improve the catalytic activity and stability of heterogeneous acid catalysts, a polystyrene microspheres modified sulfonic acid-based catalyst (PS-SO3H) was prepared. PS-SO3H was characterized by Fourier transform infrared spectroscopy, powder X-ray diffraction, scanning electron microscope, transmission electron microscope, N2 adsorption–desorption, and X-ray photoelectron spectroscopy. Catalytic efficiency was determined using the reaction of furfuryl alcoholysis to ethyl levulinate (EL). The obtained results showed that PS-SO3H had excellent catalytic performance, with EL yield of 94.7%. In addition, PS-SO3H was easily separated from the reaction system and recycled multiple times without significant reduction in activity. High catalytic activity stemmed from the effect of Brønsted acid sites and appropriate structural properties.
Graphical AbstractIn this work, density functional theory is used to study the mechanism of propane dehydrogenation over non-metallic C3N catalyst. The structure, electrostatic potential and density of state of C3N are introduced, as well as the adsorption of reactants on catalyst is studied. The propane dehydrogenation reaction is divided into the first dehydrogenation and the second dehydrogenation (deep dehydrogenation). We explore the possible dehydrogenation pathways in two-step dehydrogenation. The rate control step of the first dehydrogenation is the removal of methylene hydrogen atom from propane, and its energy barrier is 47.79 kcal/mol, which reflected the catalytic activity of the catalyst. The rate control step of deep dehydrogenation is the process of removing the first hydrogen atom of the product propylene to produce the by-product. The energy barrier is 72.80 kcal/mol, which is much larger than that of the first step of dehydrogenation, reflecting the excellent selectivity of the catalyst.
Graphic AbstractLignocellulosic biofuels are the most promising sustainable fuels for supplementing shrinking fossil resources. In this work, acid-modified vermiculite (AVM)-supported Pd–Ni bimetallic catalyst (Pd–Ni/AVM) was investigated for the hydrodeoxygenation of bio-oil and its model compounds to assess its reactivity. Pd–Ni/AVM was found to efficiently hydrodeoxygenate the investigated model compound (phenol). The phenol conversion reached 94% at 0.5% of Ni loading and temperatures beyond 513 K. Using these parameters, the phenolic hydroxyl group was removed, and the C?=?C bonds were saturated. This catalyst was also efficient in the hydrodeoxygenation of bio-oil. H2-TPR experiments elucidated the synergistic effects between the active component and the carrier, which were considered the main reason for the catalytic activity. Strong influences of the Ni loading and temperature on the hydrogenation of phenol were also observed when the Pd loading was fixed at 1 wt%.
Graphic AbstractNi–Mo2C and Ni–WC were evaluated in dry reforming of methane employing different CH4/CO2 ratios. Ni–Mo2C remained active under an excess of CH4, but deactivation occurred under an excess of CO2. Ni–WC was resistant to excess of CO2 but showed carbon deposition under excess of CH4.
Graphic AbstractFurfurylamine is an important furfural-upgrading biobased chemical for the production of pharmaceuticals, biofuels, fibers, additives, polymers, etc. In one-pot reaction system, biomass was tandemly catalyzed to furfurylamine with aluminium-based alkaline-treated graphite (Al-AG) catalyst and recombinant ω-transaminase biocatalyst. Al-AG (3.6 wt%) catalyzed corncob (75.0 g/L) to 110.0 mM furfural at 56.8% yield (based on xylan in corncob) in γ-valerolactone–water (1:4, v:v; pH 1.0) for 40 min at 180 °C. The pH-adjusted corncob-slurry (pH 7.5) containing furfural were catalyzed to furfurylamine at high yield with γ-valerolactone-tolerant Aspergillus terreus ω-transaminase biocatalyst at 35 °C using isopropylamine (3 mol isopropylamine/mol furfural) as amine donor. Such an efficient and sustainable approach for catalytic conversion of biomass to high-value-added biobased furfurylamine was successfully established in tandem reaction with Al-AG and ω-transaminase biocatalyst.
Graphic AbstractAlthough numerous efforts have been made in direct syngas conversion to higher alcohols via Fischer–Tropsch synthesis, the higher alcohols distribution remains a challenge. Here, we introduce alkaline earth metal oxide as promoter into activated carbon supported cobalt catalyst to tune distribution of higher alcohols. With the addition of Mg, the distribution of C2-5 alcohols increase from 41.2 to 75.8% accompanying with distribution of C6-18 alcohols decrease from 52.8 to 14.0%. Ba-promoted Co based catalyst (CoBa/AC) presents similar alcohols distribution to un-promoted catalyst, while the alcohol selectivity over CoBa/AC is higher than Co/AC. For promoted catalysts, the distribution of C6-18 alcohols increased in the order of Mg?<?Ca?<?Sr?<?Ba. The characterization results exhibit that the promoter addition facilitates the cobalt carbide formation, which leads to enhancement of selectivity to higher alcohols. The available active cobalt sites of promoted Co based catalysts increase in the same above order of Mg?<?Ca?<?Sr?<?Ba.
Graphic Abstract