Grafting of titanium dioxide microspheres with a temperature‐responsive polymer via surface‐initiated atom transfer radical polymerization without the use of silane coupling agents

Titania microspheres with narrow size distribution and diameters of about 1 µm were prepared and subsequently functionalized using surface‐initiated atom transfer radical polymerization (ATRP) of N‐isopropylacrylamide. The ATRP initiator was immobilized on the particle surface via acylation of surface hydroxyl groups with α‐bromoisobutyryl bromide. Subsequently, an established ATRP reaction system was used for the preparation of titania surface‐grafted poly(N‐isopropylacrylamide) (PNiPAAm). Characterization was performed with electron microscopies, X‐ray diffraction, infrared spectroscopy and dynamic light scattering. It was found that the particle size in aqueous dispersions changed reversibly with temperature as expected for a shell of PNiPAAm, a polymer with a lower critical solution temperature at 32 °C. This confirmed the successful preparation of functional, stimuli‐responsive TiO₂ microparticles via a straightforward controlled surface‐initiated polymerization method.     

Atom transfer radical polymerization of graft chains onto polyethylene film initiated at tribromomethyl unit introduced by electron beam irradiation

A novel process for graft polymerization onto a polyethylene (PE) film using atom transfer radical polymerization (ATRP) was examined. First, a PE film irradiated with an electron beam was treated with carbon tetrabromide, thereby introducing tribromomethyl groups. The number of tribromomethyl groups introduced onto the film could be controlled by adjusting the electron beam irradiation dose. Methyl methacrylate (MMA) was then graft‐polymerized by ATRP in the initiator‐introduced PE film in the presence of a copper catalyst. Based on FTIR spectra from the PMMA grafted films, the behavior of graft polymerization reactions on the film surface and inside the film are discussed. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Functionalization of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) films via surface‐initiated atom transfer radical polymerization: Comparison with the conventional free‐radical grafting procedure

We modified hydrophobic poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBHV) films with hydrophilic chains to control their surface properties. We designed and investigated surface‐initiated atom transfer radical polymerization (SI‐ATRP) to modify the PHBHV films by grafting poly(2‐hydroxyethyl methacrylate) (PHEMA) from the surface. This method consisted of two steps. In the first step, amino functions were formed on the surface by aminolysis; this was followed by the immobilization of an atom transfer radical polymerization initiator, 2‐bromoisobutyryl bromide. In the second step, the PHEMA chains were grafted to the substrate by a polymerization process initiated by the surface‐bound initiator. The SI‐ATRP technique was expected to favor a polymerization process with a controlled manner. The experimental results demonstrate that the grafting density was controlled by the reaction conditions in the first step. The grafted films were analyzed by Fourier transform infrared spectroscopy, contact angle testing, scanning electron microscopy, and energy‐dispersive X‐ray spectroscopy. The results show that grafted chains under the SI‐ATRP method were preferentially located on the surface for surface grafting and in the bulk for conventional free‐radical polymerization initiated by benzoyl peroxide. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation and characterization of grafting polyacrylamide from PET films by SI‐ATRP via water‐borne system

The grafted homopolymer and comb‐shaped copolymer of polyacrylamide were prepared by combining the self‐assembly of initiator and water‐borne surface‐initiated atom transfer radical polymerization (SI‐ATRP). The structures, composition, properties, and surface morphology of the modified PET films were characterized by FTIR/ATR, X‐ray photoelectron spectroscopy (XPS), contact angle measurement, and scanning electronic microscopy (SEM). The results show that the surface of PET films was covered by equable grafting polymer layer after grafted polyacrylamide (PAM). The amount of grafting polymer increased linearly with the polymerization time added. The GPC date show that the polymerization in the water‐borne medium at lower temperature (50°C) shows better “living” and control. After modified by comb‐shaped copolymer brushes, the modified PET film was completely covered with the second polymer layer (PAM) and water contact angle decreased to 13.6°. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Penetration behavior and subsurface grafting of dansyl cadaverine and polyethylene glycol (PEG) derivatives in poly(ethylene-co-acrylic acid) (EAA) film

Dansyl cadaverine and polyethylene glycol (PEG) derivatives were grafted on the surface of EAA film and in its subsurface region through formation of amides and esters, respectively. A two-step reaction was conducted. First, EAA film was activated with PCl₅ at room temperature. Second, the acid chloride was reacted with dansyl cadaverine or a PEG derivative to form a modified film. ATR-FTIR spectroscopy and fluorometry were employed to analyze the modified films after each step. It was found that dichloromethane yielded the highest grafting efficiency, with the dansyl cadaverine penetrating throughout the ATR-FTIR analysis region (∼400 nm) in a few minutes. As the grafting depth increased with time, so did the amount of fluorescence intensity of grafted dansyl cadaverine. ATR-FTIR spectra for PEG grafting indicated that the acid chloride peak decreased with time, while the ester peak increased. However, hydrolysis occurred at later times, consuming the acid chloride groups within the film. A marked decrease of static water contact angle was observed for EAA grafted with PEG99 (PEG that contains 99 ethylene glycol repeat units), almost 40° lower than that of neat EAA (∼99°). For other PEG-grafted films, the surface hydrophilicity was also improved.     

Surface modification of ethylene‐co‐acrylic acid copolymer films: Addition of amide groups by covalently bonded amino acid intermediates

Amide groups were anchored covalently on the surface of ethylene‐co‐acrylic acid (EAA) copolymer film by surface grafting of amino acid intermediates. The process consisted of four steps: conversion of carboxylic acid groups on the EAA surface to acid chloride groups, amino acid attachment, conversion of amino acid carboxyl groups to acid chloride groups, and amidation. All steps were carried out at room temperature. ATR‐FTIR spectroscopy was used to characterize the film after each step and to measure the kinetics of amino acid attachment. Three amino acids were studied: 12‐aminododecanoic acid (12‐ADDA), 5‐aminophthalic acid (5‐APA), and L ‐aspartic acid (AA). The longer‐chain 12‐ADDA compound was selected for its chemical similarity to migratory fatty amides that are commonly used to alter the frictional behavior of polyolefin films. The 5‐APA and AA compounds were selected because each has two carboxylic acid groups that can be converted to amide groups. After amidation, the modified EAA films were characterized by static water contact angle measurements and scanning probe microscopy. Results showed that the 12‐ADDA reacted to the surface much faster than the 5‐APA or AA. Several steps of aggressive rinsing confirmed that the 12‐aminododecanamide was chemically anchored onto the EAA surface. As a result, both hydrophilicity and surface roughness were increased. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1688–1694, 2004     

Hyperbranched homo and thermoresponsive graft copolymers by using ATRP‐macromonomer initiators

Macromonomer initiators behave as macro cross‐linkers, macro initiators, and macromonomers to obtain branched and cross‐linked block/graft copolymers. A series of new macromonomer initiators for atom transfer radical polymerization (MIM‐ATRP) based on polyethylene glycol (M_n = 495D, 2203D, and 4203D) (PEG) were synthesized by the reaction of the hydroxyl end of mono‐methacryloyl polyethylene glycol with 2‐bromo propanoyl chloride, leading to methacryloyl polyethylene glycol 2‐bromo propanoyl ester. Poly (ethylene glycol) functionalized with methacrylate at one end was reacted with 2‐bromopropionyl chloride to form a macromonomeric initiator for ATRP. ATRP was found to be a more controllable polymerization method than conventional free radical polymerization in view of fewer cross‐linked polymers and highly branched polymers produced from macromonomer initiators as well. In another scenario, ATRP of N‐isopropylacrylamide (NIPAM) was initiated by MIM‐ATRP to obtain PEG‐b‐PNIPAM branched block/graft copolymers. Thermal analysis, FTIR, ¹H NMR, TEM, and SEM techniques were used in the characterization of the products. They had a thermo‐responsive character and exhibited volume phase transition at ～ 36°C. A plasticizer effect of PEG in graft copolymers was also observed, indicating a lower glass transition temperature than that of pure PNIPAM. Homo and copolymerization kinetics were also evaluated. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Coefficient of friction reduction of ethylene‐co‐acrylic acid film: Effects of grafted 12‐aminododecanamide and solvent exposure

The effect of covalently bound 12‐aminododecanamide on the surface coefficient of friction (COF) of ethylene–acrylic acid copolymer (EAA) films was investigated. The reaction involved grafting 12‐aminododecanoic acid to the inherent carboxylic acid groups on the film, followed by amidation of the grafted amino acid. Conversion of film carboxylic acid groups to primary amide groups was also conducted to compare the impact of direct surface amidation. Subsequent measurements showed that both surface amidation schemes reduced the kinetic COF from 0.30 to 0.15 ～ 0.18. Repetitive COF testing revealed that amide‐modified EAA films maintained low COF values that were independent of the number of COF test runs. However, control experiments showed that COF values also depended greatly on simply exposing film to the various reaction solvents, which increased surface roughness. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2242–2248, 2005     

Synthesis of controlled thermoresponsive PET track‐etched membranes by ATRP method

Controlled thermoresponsive PET track‐etched membranes were synthesized by grafting N‐isopropylacrylamide (NIPAAm) onto the membrane surface via atom transfer radical polymerization (ATRP). The initial measurements were made to determine the anchoring of ATRP initiator on PET membrane surface. Thereafter, polymerization was carried out to control the mass of polymer by controlling reaction time grafted from the membrane surface and, ATR‐FTIR, grafting degree measurements, water contact angle measurements, TGA, and SEM were used to characterize changes in the chemical functionality, surface and pore morphology of membranes as a result of modification. Water flux measurements were used to evaluate the thermoresponsive capacity of grafted membranes. The results show the grafted PET track‐etched membranes exhibit rapid and reversible response of permeability to environmental temperature, and its permeability could be controlled by controlling polymerization time using ATRP method. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Surface oxidation of low‐density polyethylene films to improve their susceptibility toward environmental degradation

Polyethylene wastes, particularly as films, have accumulated over the last several decades resulting in a major visual litter problem. The aim of this study was to investigate the ability of chemical reagents to oxidize the low‐density polyethylene (LDPE) film surface to increase their susceptibility toward photodegradation and thermal degradation. Three chemical agents, namely, potassium permanganate, potassium persulfate, and benzoyl peroxide, were used to oxidize the film surface to generate chromophoric groups, such as carbonyl groups, which are the main reason for the enhanced environmental degradation of photolytic polymers, such as ethylene–carbon monoxide and ethylene–vinyl ketone copolymers. For the chemical treatment, LDPE films of 70 ± 5 μm thickness were prepared by a film‐blowing technique and subsequently reacted with the aforementioned oxidizing agents. To aid the oxidation process, the reaction with potassium persulfate and potassium permanganate was performed under microwave irradiation heating. In the case of benzoyl peroxide aided oxidation, the films were subjected to repeated coating–heating treatments up to a maximum of 10 cycles. The treated films were subjected to accelerated aging, that is, xenon‐arc weathering and air‐oven aging (at 70°C), for extended time periods. The chemical and physical changes induced as a result of aging were followed by the monitoring of changes in the mechanical, structural, and thermal properties. The results indicate that the surface‐oxidized LDPE films exhibited enhanced susceptibility toward degradation; however, the extent was reduced as compared to photolytic or other degradable compositions. The ability of the chemicals to initiate degradation followed the order potassium persulfate < potassium permanganate < benzoyl peroxide. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Thermal crosslinking of collagen immobilized on poly(acrylic acid) grafted poly(ethylene terephthalate) films

Graft polymerization of acrylic acid onto plasma‐treated poly(ethylene terephthalate) (PET) films was used to prepare surfaces suitable for collagen immobilization by dip‐coating. Such surfaces could be used as matrices for smooth muscle cell cultures in tissue engineering. Contact angle measurements showed that plasma‐treated and grafted PET films undergo considerable surface reorganization during storage under ambient conditions. However, after collagen immobilization the contact angle remained relatively stable. The amount of collagen initially attached to the film surface increased with increasing poly(acrylic acid) graft density, but subsequent washing in water led to significant collagen loss. This loss could nevertheless be substantially reduced by thermal crosslinking of the collagen in the range 110–130 °C. Atomic force microscopy (AFM) observations suggested that the washed crosslinked collagen has a very similar structure to that of the un‐crosslinked collagen. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1874–1880, 2002     

Modification of polyester fabric properties by surfactant‐aided surface polymerization

Poly(methyl methacrylate) (PMMA) was applied to polyester fabric using a surface analog of emulsion polymerization. The admicellar polymerization was carried out using 1.5 mM dodecylbenzenesulfonic acid (DBSA) at pH 4 with 0.15M NaCl, 1 : 8 DBSA:monomer, and 1 : 10 initiator:monomer molar ratio. The PMMA film, which was formed, was characterized by SEM and FTIR. Hydrolysis of the PMMA film on polyester fabric was carried out to introduce carboxylic acid groups to the polyester surface to increase its hydrophilicity. The results show that a PMMA thin film was successfully formed on the polyester fabric. The water contact angle of the PMMA‐coated polyester fabric after hydrolysis by 10M H₂SO₄ for 5 h was reduced from 117.3° to 0° and there was a significant increase in the moisture‐regain value of the treated fabric. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 4059–4064, 2007     

Kinetic study of the atom transfer radical polymerization of n‐docosyl acrylate

The atom transfer radical polymerization (ATRP) of n‐docosyl acrylate (DA) was studied at 80°C in N,N‐dimethylformamide using the carbon tetrabromide/FeCl₃/2,2′‐bipyridine (bpy) initiator system in the presence of 2,2′‐azobisisobutyronitrile (AIBN) as the source of reducing agent. The rate of polymerization exhibits first‐order kinetics with respect to the monomer. The linear relationship between the molecular weight of the resulting poly(n‐docosyl acrylate) with conversion and the narrow polydispersity of the polymers indicates the living characteristics of the polymerization reaction. The significant effect of AIBN on the ATRP of DA was studied keeping [FeCl₃]/[bpy] constant. A probable reaction mechanism for the polymerization system is postulated to explain the observed results. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2147–2154, 2005     

Synthesis of well‐defined polystyrene‐graft‐poly(methyl methacrylate)

A well‐defined graft copolymer, polystyrene‐graft‐poly(methyl methacrylate), was synthesized in two steps. In the first step, styrene and p‐vinyl benzene sulfonyl chloride were copolymerized via reversible addition–fragmentation chain transfer polymerization (RAFT) in benzene at 60 °C with 2‐(ethoxycarbonyl)prop‐2‐yl dithiobenzoate as a chain transfer agent and 2,2′‐azobis(isobutyronitrile) as an initiator. In the second step, poly[styrene‐co‐p‐(vinyl benzene sulfonyl chloride)] was used as a macroinitiator for the atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in toluene at 80 °C with CuCl as a catalyst and 2,2′‐bipyridine as a ligand. With sulfonyl chloride groups as the initiating sites for the ATRP of MMA, high initiation efficiencies were obtained. Copyright © 2006 Society of Chemical Industry     

Synthesis and characterization of poly(n‐butyl methacrylate)‐b‐polystyrene diblock copolymers by atom transfer radical emulsion polymerization

Poly(n‐butyl methacrylate) (PBMA)‐b‐polystyrene (PSt) diblock copolymers were synthesized by emulsion atom transfer radical polymerization (ATRP). PBMA macroinitiators that contained alkyl bromide end groups were obtained by the emulsion ATRP of n‐butyl methacrylate with BrCH₃CHCOOC₂H₅ as the initiator; these were used to initiate the ATRP of styrene (St). The latter procedure was carried out at 85°C with CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine as the catalyst and polyoxyethylene(23) lauryl ether as the surfactant. With this technique, PBMA‐b‐PSt diblock copolymers were synthesized. The polymerization was nearly controlled; the ATRP of St from the macroinitiators showed linear increases in number‐average molecular weight with conversion. The block copolymers were characterized with IR spectroscopy, ¹H‐NMR, and differential scanning calorimetry. The effects of the molecular weight of the macroinitiators, macroinitiator concentration, catalyst concentration, surfactant concentration, and temperature on the polymerization were also investigated. Thermodynamic data and activation parameters for the ATRP are also reported. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2123–2129, 2005     

Highly transparent thermoresponsive surfaces based on tea‐stain‐inspired chemistry

A highly transparent thermoresponsive surface that could switch its wettability at different temperatures was constructed via tea‐stain‐inspired chemistry. The pristine tannic acid was modified by alkyl bromide with a substitution degree of 1.7 alkyl bromide units per tannic acid molecule. A coating of the alkyl bromine modified tannic acid with a thickness of 22 ± 3 nm was deposited onto the surface of glass via auto‐oxidation. A poly(N‐isopropylacrylamide) (PNIPAAm) brush was grafted from the alkyl bromide initiator via surface initiation atom transfer radical polymerization with a polymer grafting density of 8.6 × 10^?3 mg/cm². Due to the low thickness of the tannic acid and PNIPAAm coating, the transparency of this thermoresponsive surface remained constant at 94.3% even when the temperature was changed from 20 to 40 °C, but the water contact angle of this surface increased rapidly when the temperature was elevated from 25 to 35 °C. Due to the inevitable hydrolysis and deprotonation, this tea‐stain‐inspired chemistry‐based coating was stable in aqueous solution with a pH of 7 or isopropanol for soaking times of up to 24 h. The coating reported here may have various potential applications such as surfaces for cell culture media, food storage, or self‐cleaning materials. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46694.     

Modification of poly(octadecene‐alt‐maleic anhydride) films by reaction with functional amines

Thin films of poly(octadecene‐alt‐maleic anhydride) on top of Si wafers and glass plates were modified by reactions with different functional amines to be used in future studies on the relevance of certain molecular surface properties for the covalent immobilization of proteins. For that aim, a strategy was developed and applied to convert the anhydride moieties of the copolymer by functional amines into side chains bearing hydrophilic groups of acidic (carboxylic acid, sulfonic acid), basic (amines), or neutral (poly(ethylene oxide) (PEO), glucose) character. The modification of the copolymer films was achieved through the two‐step formation of a cyclic imide, which was very stable in aqueous solution. Depending on the reactivity of the applied amine, the adjustment of the reaction time was suitable for the preparation of partially converted surfaces of the polymer film. Degrees of modification between 5 and 30% (according to X‐ray photoelectron spectroscopy data) were obtained. Annealing the modified polymer films induced efficient back‐formation of the anhydride groups. By reaction of the layered polyanhydrides with highly crosslinked diamines, amine‐functionalized polymer films were produced that were capable of binding secondary polyanhydride layers. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1255–1266, 2003     

Controlled grafting of polymer brushes on poly(vinylidene fluoride) films by surface‐initiated atom transfer radical polymerization

Controlled grafting of well‐defined polymer brushes on the poly(vinylidene fluoride) (PVDF) films was carried out by the surface‐initiated atom transfer radical polymerization (ATRP). Surface‐initiators were immobilized on the PVDF films by surface hydroxylation and esterification of the hydroxyl groups covalently linked to the surface with 2‐bromoisobutyrate bromide. Homopolymer brushes of methyl methacrylate (MMA) and poly(ethylene glycol) monomethacrylate (PEGMA) were prepared by ATRP from the α‐bromoester‐functionalized PVDF surface. The chemical composition of the graft‐functionalized PVDF surfaces was characterized by X‐ray photoelectron spectroscopy (XPS) and attenuated total reflectance (ATR)–FTIR spectroscopy. Kinetics study revealed a linear increase in the graft concentration of PMMA and PEGMA with the reaction time, indicating that the chain growth from the surface was consistent with a “controlled” or “living” process. The “living” chain ends were used as the macroinitiator for the synthesis of diblock copolymer brushes. Water contact angles on PVDF films were reduced by surface grafting of PEGMA and MMA. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3704–3712, 2006     

Synthesis of amphiphilic poly(methyl methacrylate)‐block‐poly(methacrylic acid) diblock copolymers by atom transfer radical polymerization

Atom transfer radical polymerization (ATRP) of 1‐(butoxy)ethyl methacrylate (BEMA) was carried out using CuBr/2,2′‐bipyridyl complex as catalyst and 2‐bromo‐2‐methyl‐propionic acid ester as initiator. The number average molecular weight of the obtained polymers increased with monomer conversion, and molecular weight distributions were unimodal throughout the reaction and shifted toward higher molecular weights. Using poly(methyl methacrylate) (PMMA) with a bromine atom at the chain end, which was prepared by ATRP, as the macro‐initiator, a diblock copolymer PMMA‐block‐poly [1‐(butoxy)ethyl methacrylate] (PMMA‐b‐PBEMA) has been synthesized by means of ATRP of BEMA. The amphiphilic diblock copolymer PMMA‐block‐poly(methacrylic acid) can be further obtained very easily by hydrolysis of PMMA‐b‐PBEMA under mild acidic conditions. The molecular weight and the structure of the above‐mentioned polymers were characterized with gel permeation chromatography, infrared spectroscopy and nuclear magnetic resonance. Copyright © 2005 Society of Chemical Industry     

Synthesis of star–comb‐shaped polymer with porphyrin‐core and its self‐assembly behavior study

5,10,15,20‐tetra(4‐hydroxyphenyl)porphyrin (THPP) was synthesized by the condensation of pyrrole with 4‐hydroxybenzaldehyde in the presence of solvent (propionic acid). Subsequently, the resulting THPP was converted to a tetrafunctional star‐shaped macroinitiator (porphyrin‐Br₄) by esterification of it with 2‐bromopropanoyl bromide, and then atom transfer radical polymerization (ATRP) of styrene was conducted at 110°C with CuCl/2,2′‐bipyridine as the catalyst system. The resulting product was reacted with NBS to obtain star‐shaped initiator porphyrin‐(PSt‐Br)₄, which was used the following ATRP of the GMA to synthesize star–comb‐shaped grafted polymer porphyrin‐(PSt‐g‐PGMA)₄. The number molecular weight was 2.3 × 10⁴ g/mol, and the dispersity was narrow (M_w/M_n = 1.32). The structure of the polymers was investigated by NMR, UV–vis, IR, and GPC measurement. The self‐assembly behavior of the polymer porphyrin‐(PSt‐g‐PGMA)₄ was studied by DLS and AFM. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012