共查询到20条相似文献,搜索用时 109 毫秒
1.
《中华手工》2013,(8):90
试读:遍地艺术弗赖堡拼贴地砖走在巴黎的街上,切记要看地上,因为一不小心,就会踩到地雷;而走在弗赖堡的街上,也切记要看地上,因为这里有满城的砌石风景"马赛克拼贴"。弗赖堡旧城区是无障碍的行人徒步区,街道上满布精心设计的鹅卵石拼贴图腾,塑造了这个亲密尺度城市中最独特的画面,每个景点、每家店面、每个转角,都有诉说着历史的符号,或者只是一朵装饰性的小花与图腾,这些东西,看懂也罢,看不懂也行,让我一路走来,走得很不专心,也走得快乐无比。这些花样百变的图案,总计超过70种,有传统的,有故事的,有市徽的,有可爱的,有应景的,有符合店家的,这一块块的石材由莱茵可采集而来,别具巧思地拼贴 相似文献
2.
繁闹的街市,一间半户外的玻璃阳光房隐匿于此,暖阳铺洒在挑高的落地玻璃窗上,晶莹透亮,透过门窗隐约看得见一些陈列在架子上的茶瓷器具,神秘而低调,想进去探听它们的故事。推门而入,宽敞厚实的老榆木长桌映入眼帘,朴莲上房、石雨、大乘器等寸村品牌旗下的器用陈列其上,传统素雅的风格让浮躁的心沉静下来。精致小巧的茶杯,承载着青花述说的故事,竟让人为之动容;方正质朴的竹制盒子,灵巧多变,包装盒、茶盘、收纳盒、果盘,随心随性,应有尽有。古旧的砖雕照壁有4米高,随照壁向上,一盏竹制吊灯垂挂而下,精美而独特。还有一些没见过的装饰,都是寸村自主设计的作品,虽然没有夸张的元素,却各有各的味道,叠加在一起,组成这间兼具现代与古典元素的展示厅。 相似文献
3.
4.
5.
望月 《中国化妆品(专业版)》2013,(8):66-69
——夜东风来,吹开了柳岸的桃花梨花,唤醒了蛰伏了一冬的小动物们,那么你呢?趁着夏日还没到,赶紧努力一把吧,生命是有限的。时间是无限的,我们何不把无限的时间分一部分给瘦身事业呢?更何况,春天来了,夏天还会远吗!褪去了冬日厚实的棉衣,夏日的步步临近,瘦身产品立马咸了爱美女性美丽清单里不可缺少的一项。清凉的海边。休闲的假日,美丽的约会、多年不见的老友聚会,种种场合都是展现婀娜身姿的好时机,然而,每天朝九晚五的办公室生活,却让许多上班族变成小"腹"婆,小象腿,拜拜臂,在镜子面前始终悲哀地感叹道:究竟何时才能穿上小一号尺寸的衣服呢?何时才能更自信勇敢地在众人面前展示窈窕身材?生命不患,瘦身不止,万事终于细节,减肥也一样,牢记生活中的小细节,让你在不知不觉中保持纤瘦身材,做个一辈子的健康瘦美人! 相似文献
6.
7.
8.
9.
思路决定出路,在当前陶瓷下乡热潮中,最关键的是要转变观念,农村市场不是倾销垃圾产品的市场,恰恰相反,它是企业立足长远打造品牌的根基,虽然农村主流消费阶层更多需要的大众化产品,但大众化产品也是一种品牌,它和垃圾产品是有本质去区别的,它对品位和质量也是有要求的,将垃圾产品倾销农村虽然能短期获利,但它却是短命的,是不可持续发展的,这种教训比比却是,只有立足长远,将农民当做朋友,真诚的为他们服务,企业才有可能站稳根基,打造出企业的品牌,成为可持续发展的百年老店! 相似文献
10.
<正>纸艺,百折千变。越来越多的人喜欢上这门艺术,纸艺店也开始在城市的角落里悄然绽放。迷雾朦胧,闲游惠山古镇,在绣璋街邂逅了一家纸艺店,花姿招展,灿烂满目,让人忍不住走上"吱呀"作响的木楼梯,来到2楼的"天天爱纸艺"花坊。敞亮的木制阁楼里,摆满了各种花卉,明朗的向日葵、娇羞的百合、热烈的非洲菊、妩媚的蓝色妖姬、优雅的薰衣草……所有的花都不是真的花,却有真花之美。雕花木窗旁,店主刘芳正在创作一簇虞美人,她将绿色纸条在铁丝上缠绕成花杆,嫩黄的纸片剪成纤细的丝状卷出花蕊,火红的花瓣用双面胶固定……偶尔举起半成品,想象它完成后的动人模样。面容年轻的刘芳,其实是一个10岁孩子的妈妈,开这样一家店,既是成全自己热爱手工,想开一家别致小店的心愿,也是为了更好地照顾儿子天天。刘芳最爱的手工就是纸艺了,"多彩柔媚的花瓣,吐露芳华的花蕊,纸最能表现花朵的美丽。"开店之前,一直纠结要 相似文献
11.
为分析陶瓷墙地砖干法造粒过程坯料粉体成形与造粒室转速的关系.基于欧拉-欧拉双流体模型模拟陶瓷干法造粒混料过程数理模型,同时对坯料粉体粗糙度、粉体级配及粉体流动性指数进行实验分析,验证数值模拟的正确性.当造粒室转速分别为120 RPM、140 RPM、160 RPM时,坯料粉体体积分布大小基本保持不变,坯料粉体均匀性和分散性逐渐变好,团聚现象逐渐消失;当造粒室转速分别为180 RPM、200 RPM时,坯料粉体体积分布大小仍基本保持不变,坯料粉体均匀性和分散性逐渐变差,团聚现象逐渐明显.实验结果表明:当造粒室转速分别为120 RPM、140 RPM、160 RPM、180 RPM、200 RPM时,坯料粉体粗糙度系数平均值依次为1.79、1.77、1.68、1.74、1.78;粉体级配百分比依次为73%、77%、89%、80%、72%;流动性指数依次为63.54、66.95、69.75、68.32、67.21.综合分析说明:造粒室转速为160 RPM时,坯料粉体均匀性和分散性良好,且无明显团聚现象,此时坯料粉体粗糙度系数平均值最小、粉体级配百分比最高、流动性指数最大,即造粒效果最好. 相似文献
12.
探究了以磷酸分解磷矿,关键酸解工艺参数对磷及Fe、Al、Mg、Pb、As浸出的影响规律,并从热力学角度进行了分析。结果表明,磷矿内磷及Fe、Al、Mg浸出率随磷酸质量分数、反应温度、反应时间和液固比的增大而增大,搅拌速度影响不明显;Pb浸出率随磷酸质量分数、反应温度和液固比的增大而增大,搅拌速度、反应时间影响不明显;As浸出率随反应温度升高呈先增大后减小趋势,随反应时间增加略有减小,磷酸质量分数、搅拌速度和液固比影响不明显。控制磷酸质量分数为30%(以P2O5计)、反应温度为80 ℃、搅拌速度为300 r/min、反应时间为150 min、液固质量比为10∶1,在此条件下,磷及Fe、Al、Mg、Pb、As的浸出率分别为98.65%、68.56%、48.54%、95.84%、32.85%和84.62%。通过热力学分析表明磷矿内Mg、As浸出率较高,Pb浸出率较低,而Fe、Al浸出率大小主要取决于磷矿中褐铁矿及高岭土含量。 相似文献
13.
K. V. Simonov V. V. Zagnoiko L. D. Bocharov 《Refractories and Industrial Ceramics》1989,30(1-2):99-107
Conclusions The most common and characteristic forms of scrap of magnesia parts differing in form, dimensions, and composition are shown. These include deviations of the dimensions from the nominal, breaking off of the corners and edges, nonuniformity, welding together, spots, voids, fire cracks, spalls, and cracks of different origin.The reasons for formation of scrap were determined. The primary of them are the reduced quality of the raw material (chromite, magnesite) with a larger quantity of impurities containing limited silicon and calcium oxides, sometimes insufficient density, grain size, and completeness of hydration of the magnesite powders, nonconformity of the bunker, proportioning, mixing, and pressing equipment to the requirements of modern production of progressive high-quality refractories, the insufficiently high binding capacity of lignosulfonates, deviations in the quality of assembly and finishing of press equipment and automatic ejectors, of the car floor lining, and in firing conditions, a high variation in density of the green parts, and nonuniform heating and cooling in the volume of the parts and of the whole charge during firing. More than 50% of the total scrap of all forms is due to firing scrap of parts.The primary means of reducing or eliminating scrap of parts and simultaneously increasing their quality based on the reasons for formation of different forms of it were noted. These above all else, are increasing the volumes and improving and introduction of new methods of concentration of magnesite and chromite, a successive increase in the share of chrome concentrates, chromium-containing broken parts, and powders by firing of magnesite and caustic dust in the production of magnesia refractory parts as the result of a decrease in the share of commercial natural chromite and magnesite, the use in the production of parts of high-quality type PMSP-93 powder produced in shaft kilns and used as the charge for production of fused materials, the use of the prospect of processes for production of dense periclase powders uniform in chemical analysis from recovered caustic dust, replacement of obsolete mixing and press equipment by more modern, increasing the strength of green parts by above all else improving the binding properties of LST and increasing pressing pressure, forming of the taper of parts by the side plates of the die, improving the quality of assembly and increasing the reliability of functioning of press equipment and automatic ejectors, improving car floor linings, introduction of new methods and increasing the volumes of production of progressive unfired refractories in place of certain forms of fired parts, observation of all production parameters, and a relationship of the wages of labor to the quantity of scrap and the quality of refractories.Introduction of the new management system and the active work of the quality groups created will open up and lead to the action of unutilized reserves for reduction of scrap.Translated from Ogneupory, No. 2, pp. 31–38, February, 1989. 相似文献
14.
泡沫剂辅助蒸汽与孤岛稠油相互作用研究 总被引:1,自引:0,他引:1
模拟了以孤岛现场用DHF作为泡沫剂辅助蒸汽驱过程,泡沫剂浓度为0.2%~1.5%,作用温度为65~200℃,油水质量比为3∶1,作用压力8 MPa,研究其对孤岛稠油界面性质、油品胶体稳定性、四组分组成以及重组分胶粒粒度的影响规律。结果表明,在蒸汽作用下,提高泡沫剂质量分数,可降低稠油-水界面张力,降低油品沥青质组分含量,增大胶质/沥青质之值;沥青质组分分子量减小,沥青质聚沉起始点增大,稠油胶体稳定性提高。在泡沫剂辅助过热蒸汽与稠油作用下,提升作用温度,会引起稠油-水界面张力降低,稠油沥青质聚沉起始点减小,胶体稳定性降低;同时稠油中沥青质组分含量增大,胶质/沥青质的值减小,沥青质组分分子量增大。 相似文献
15.
针对尿素生产的特点,分析了对尿素设备腐蚀的影响因素:介质温度、氨碳摩尔比、水碳摩尔比、氨基甲酸铵溶液浓度、氧含量、硫含量、氯离子含量和介质流速等。提出了正常生产和停车封塔2种情况下的防腐措施。正常生产期间要严格控制如下指标:操作温度、系统的加氧量、硫含量、氯离子含量、氨碳比和水碳比;停车期间要严格控制系统的氨碳比和水碳比,同时根据不同状况来确定停车封塔时间。 相似文献
16.
为研究煤矸石主要污染组分在不同淋溶条件下溶出规律,本研究以辽宁某煤矿煤矸石为实验材料,通过静态淋溶实验,结合XRD、SEM检测技术,综合分析煤矸石中Cl-、总硬度、Cu、Zn等主要污染组分溶出量在不同固液比、pH值、粒径、是否搅动条件下随时间变化的规律.实验结果表明:污染组分溶出量受淋溶条件变化的影响较明显,且在固液比为1:5、pH值为5.3、粒径小于5 mm、间歇性搅动条件下,Cl-和总硬度的溶出量变化较明显;淋溶初期,由于煤矸石表面风化,污染组分溶出速率较大;淋溶过程中,污染组分赋存状态的不同使其溶出效果不同,且由于二次相的形成,胶体和煤矸石中粘土的吸附作用,污染组分溶出量存在一定程度的波动. 相似文献
17.
为了阐明复合杆式射流的性能,设计了8种不同材料的复合球缺罩,包括聚乙烯/铜、铝/铜、钛/铜、铁/铜、铜/铜、钼/铜、钽/铜、钨/铜材料,并采用LS-DYNA软件对其杆式射流的成型过程进行三维数值模拟,分析了杆式射流威力性能,通过静破甲试验验证了数值模拟结果。结果表明,在保持内罩材料为紫铜的条件下,随着外罩材料密度的增大,射流整体速度减小,射流动能随外罩材料密度的增大而减小;在外罩为金属材料时,外罩材料冲击阻抗越大,内罩所受爆轰波透射压力越小,射流整体速度、射流动能随外罩冲击阻抗增大而减小;经对比发现,聚乙烯/铜复合杆式射流整体速度最高,动能最大,破甲威力较佳,铝/铜复合杆式射流次之。静破甲试验结果表明,聚乙烯/铜复合杆式射流对钢靶侵彻深度较铝/铜复合杆式射流有一定提高,与数值模拟结果一致。 相似文献
18.
19.
K. V. Simonov L. D. Bocharov M. M. Nikiforov V. M. Ust'yantsev 《Refractories and Industrial Ceramics》1980,21(5-6):232-236
Conclusions A correlation is shown between the high-temperature, physicochemical processes in basic refractories, changes and reactions in the gaseous phase, and the nature of the wear of the roof of a tunnel kiln.As a result of dissociation, oxidation, and volatilization the waste gases are enriched with vapors of alkalis, CrO3, sulfur trioxide, and oxides of iron and magnesium, and become corrosive with respect to the kiln lining. The reaction of the oxides vapors with each other and with the lining of the roof and their condensation determines the nature of the wear in the magnesite-chromite refractories, the chemical and mineral compositions of the resulting deposits and crusts. The main source of alkalis and sulfur trioxide is the sulfite yeast dregs (sulfite lye) present in the goods being fired.We determined the temperature relationship with the composition and amounts of deposits and crusts. Carcase and skeletal deposits and crusts formed on the firing section of the kiln, mainly periclase and spinel compositions; in the warming-up section the deposits were brittle, granulated, consisting of sulfates, chromates, chromium oxide, periclase, and spinels.It was found that the deposits on the walls of the pores in the MKhS refractories consist of sulfates and chromates, forming solid solutions.Translated from Ogneupory, No. 5, pp. 13–16, May, 1980. 相似文献
20.
文章主要重点从教学理念方面,提出在新教材实施过程中,教师应树立整体育人观,树立新的教育思想,转变育人观念;树立教学服务观,把"教"和"学"有机统一起来,使教师的"教"为学生的"学"服务;树立情感教育观,充分发挥情感教学的重要作用,加强师生之间的情感互动;树立目标学习观,依据大纲要求和学生实际,制定合理、具体、确切、科学的课堂教学目标;树立课堂调控观,有效利用课堂教学中的每一分钟,实现课堂教学的最优化;培养创新学习观,培养学生自主探索、自主研究的精神,培养学生的创新能力。 相似文献