Synthesis and characterization of novel poly(γ‐benzyl‐L‐glutamate) derivatives tailored for the preparation of nanoparticles of pharmaceutical interest

Four poly(γ‐benzyl‐L ‐glutamate) (PBLG) derivatives bearing at one end specific groups were synthesized by ring‐opening polymerization of the corresponding γ‐benzyl‐L ‐glutamate N‐carboxyanhydride using different amine‐terminated initiators. These moieties were chosen to introduce, on demand, specific functionalities in nanoparticles of pharmaceutical interest. The PBLG and PBLG derivatives were characterized by ¹H NMR, viscosimetry, Fourier transform infrared spectroscopy and differential scanning calorimetry. Nanoparticles smaller than 100 nm in diameter could be easily prepared from these PBLG derivatives by slight modification of a known nanoprecipitation technique. Copyright © 2006 Society of Chemical Industry     

Synthesis and characterization of polypeptide containing liver‐targeting group

Glycyrrhetinic acid, glycyrrhizic acid and bile acid were reported to be accumulated in liver. A series of novel liver‐specific targeting polypeptides, poly(γ‐benzyl‐L ‐glutamate), were synthesized by ring‐opening polymerization (ROP) of N‐carboxyanhydride of γ‐benzyl‐L ‐glutamate (BLG‐NCA) with amine‐terminated compounds containing the above‐mentioned liver‐targeting group as an initiator. The molecular weights of the polypeptides were measured by gel permeation chromatography. The structures of these polypeptides and their initiators were confirmed by FTIR and ¹H‐NMR spectroscopy. The results demonstrate that it is an efficient strategy to introduce a liver‐targeting group into polymers via amine‐terminated compounds containing glycyrrhetinic acid, glycyrrhizic acid and bile acid. The novel polymers have potential medical applications in targeted drug delivery. Copyright © 2006 Society of Chemical Industry     

Thermoplastic hydrogel based on pentablock copolymer consisting of poly(γ‐benzyl L‐glutamate) and poloxamer

A thermoplastic hydrogel based on a pentablock copolymer composed of poly(γ‐benzyl L ‐glutamate) (PBLG) and poloxamer was synthesized by polymerization of BLG N‐carboxyanhydride, which was initiated by diamine‐terminated groups located at the ends of poly(ethylene oxide) (PEO) chains of the poloxamer, to attain a new pH‐ and temperature‐sensitive hydrogel for drug delivery systems. Circular dichroism measurements in solution and IR measurements in the solid state revealed that the polypeptide block existed in the α‐helical conformation, as in the PBLG homopolymer. The intensity of the wide‐angle X‐ray diffraction patterns of the polymers depended on the poloxamer content in the copolymer and showed basically similar reflections to the PBLG homopolymer. The melting temperature (T_m) of the poloxamer in the copolymer was reduced with an increase of the PBLG block in comparison with the T_m of the poloxamer, which is indicative of a thermoplastic property. The water contents of the copolymers were dependent on the poloxamer content in the copolymers, for example, those for the GPG‐2 (48.7 mol % poloxamer) and GPG‐1 (57.5 mol % poloxamer) copolymers were 31 and 41 wt %, respectively, indicating characteristics of a polymeric hydrogel. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2649–2656, 2003     

Preparation and characterization of mono‐ and di‐d‐α‐tocopheryl polyethylene glycol 1000 succinate

Mono‐d‐α‐tocopheryl polyethylene glycol 1000 (TPGS 1000) and di‐TPGS 1000 were prepared from the synthesized TPGS 1000 mixture. The key separation step was performed by a Simulating Moving Bed chromatographic process. The chemical structures and molecular weight distrubution were characterized by ¹H‐NMR and MALDI‐TOF mass spectroscopy. NMR and MALDI‐TOF MS data confirmed the occurrence of di‐TPGS. Both NMR and MALDI‐TOF MS results showed the degree of polymerization of the two esters and the molecular mass. The melting temperatures of the two polymers were investigated by DSC and the thermal decomposition temperatures have been determined by TGA. The melting temperatures of the two esters were 33 and 15°C, separately. And the two separated TPGS esters exhibited different thermal decomposition courses. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Miscibility,thermal behaviour,morphology and mechanical properties of binary blends of poly[(R)‐3‐hydroxybutyrate] with poly(γ‐benzyl‐L‐glutamate)+

The miscibility, thermal behaviour, morphology and mechanical properties of poly[(R)‐3‐hydroxybutyrate] (PHB) with poly(γ‐benzyl‐L ‐glutamate) (PBLG) are investigated by means of differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and tensile tests. The DSC results show that PHB and PBLG are immiscible in the melt state. Such immiscibility also exists in the amorphous state due to a clear two‐phase separated structure observed by SEM measurements. The blend samples with different thermal history, namely as original and melt samples separately, display differences in thermal behaviour such as the DSC scan profile, the crystallinity and the melting temperature of PHB. The crystallization of PHB both from the molten state and the amorphous state is retarded on addition of the second component. The SEM measurements reveal that a phase inversion occurs between the PHB/PBLG (60/40) and PHB/PBLG (40/60) blends. Except for the PHB/PBLG (40/60) blend, a microphase separated structure is observed for all blend compositions. The mechanical properties vary considerably with blend composition. Compared with pure components, the PHB/PBLG (20/80) blend shows a certain improvement in mechanical properties. © 2001 Society of Chemical Industry     

Synthesis and characterization of water soluble poly(N‐acetyl)iminoethylene and poly(ethyleneimine) by ion‐exchanged clay montmorillonite

The cationic polymerization of 2‐méthyl‐2‐oxazoline was carried out at 0°C in acetonitrile using an acid‐exchanged montmorillonite as acid solid ecocatalyst (Maghnite‐H⁺). The effect of the amount of catalyst, solvent, and times of polymerization on yield and viscosity of polymer was studied. A typical reaction product (PMOX) was analyzed by infrared and nuclear magnetic resonance spectroscopy as well as by gel‐permeation chromatography and MALDI‐TOF MS. The polymers presented similar spectrometric results and narrow molecular weight distribution. The poly(N‐acetyl)iminoethylene was hydrolyzed in acid medium obtaining a linear poly(ethyleneimine). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:3741–3750, 2006     

Synthesis and ring‐opening polymerization of macrocyclic aromatic sulfide oligomers

A series of macrocyclic(arylene sulfide) oligomers were synthesized by reaction of 4,4′‐oxybis(benzenethiol) with a number of difluoro compounds in dimethylformamide (DMF) in the presence of anhydrous K₂CO₃ under high dilution conditions. The difluoro compound can be 4,4′‐difluorobenzophenone, bis(4‐fluorophenyl)sulfone or 1,3‐bis(4‐fluorobenzoyl)benzene. Detailed structural characterization of these oligomers by matrix‐assisted laser desorption and ionization‐time of flight‐mass spectroscopy (MALDI‐TOF‐MS) demonstrated their cyclic nature. The MALDI‐TOF‐MS technique has proved to be a powerful tool to analyze these cyclics. These cyclic oligomers are amorphous and highly soluble in DMF and N,N′‐dimethyl acetamide. Moreover, these cyclic(arylene sulfide) oligomers readily underwent ring‐opening polymerization in the melt at 285 °C in the presence of 2,2′‐dibenzothiazole disulfide, affording linear, high molecular weigh poly(aromatic sulfide)s. These polymers are insoluble in most common solvents. Copyright © 2004 Society of Chemical Industry     

High activity of rare earth tetrahydroborates for ring‐opening polymerization of ω‐pentadecalactone

Ring‐opening polymerization of ω‐pentadecalactone (PDL) by tetrahydroborate complexes of rare earth metals, Ln(BH₄)₃(THF)₃ (Ln = La ( 1 ), Nd ( 2 ), Y ( 3 )), was studied. These complexes showed high activity for PDL polymerization in THF at 60°C. Among the complexes 1 – 3 , the neodymium complex 2 was most active. The obtained poly(PDL) was demonstrated to be hydroxy‐telechelic by ¹H‐NMR and MALDI‐TOF MS spectroscopy. Biodegradation of the poly(PDL) in compost at 60°C was investigated, where 18% weight loss of the samples was observed after 280 days. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation and characterization of highly oriented poly(γ‐benzyl L‐glutamate) networks and gels with long channels with micrometer‐scale diameters

Poly(γ‐benzyl L ‐glutamate) (PBLG) gels with highly oriented α‐helix chains were prepared by the crosslinking of PBLG chains through changes in the concentration of ethylenediamine, used as a crosslinker, in 1,4‐dioxane in the presence of the strong magnetic field of an NMR magnet with a strength of 10.5 T. The experimental results showed that in one of these gels, long channels with an average diameter of about 100 μm were formed by phase separation between crosslinked PBLG and the solvent. Furthermore, three‐dimensional ¹H‐NMR imaging patterns showed that the long channels were aligned in the direction parallel to the α‐helix axis. The PBLG gel was swollen in the direction perpendicular to the α‐helix axis, but it was not swollen in the direction parallel to the α‐helix axis. The X‐ray diffraction patterns of the gel showed that the interchain distance between the two nearest neighboring PBLG chains changed from 13.4 to 18.1 Å with a change in the swelling degree. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1053–1060, 2004     

Electrospinning of poly(γ‐benzyl–α,L‐glutamate) microfibers for piezoelectric polymer applications

One of the latest developments in the field of piezoelectric polymers is the use of poly(γ‐benzyl‐α,L‐glutamate) (PBLG), a poly(amino acid) that can be poled along its α‐helical axis and fabricated into thermally stable piezoelectric microfibers via electrospinning. This study demonstrates a method for improving the piezoelectricity of electrospun PBLG microfibers by controlling the orientation of fibers using a method based on a concentrated electric field. The piezoelectricity is verified via customized quasi‐static and dynamic measurement methods, while the correlation between fiber alignment and the piezoelectric constant, d₃₃, in the longitudinal mode of the electrospun PBLG fibers is investigated. When the level of alignment was varied from 50% to 90%, the piezoelectric constant increased linearly, showing a maximum d₃₃ of 27 pC N^?1 and a maximum force sensitivity of 65 mV N^?1 at peak alignment. A fabricated flexible prototype based on electrospun PBLG fibers provides a new solution for the use of PBLG fibers in wearable energy harvesters or composites based on piezoelectric polymer fibers. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46440.     

Characterization of the biocide polyhexamethylene biguanide by matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry

The biocide polyhexamethylene biguanide (PHMB) has been characterized by matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS). Previously, no method has been able to provide a detailed structural characterization of PHMB. MALDI‐TOF MS was able to detect PHMB oligomers with n ≤ 6. Six different PHMB product types were identified, which possess combinations of amine, cyanoamine, guanidine, or cyanoguanidine end‐groups. Postsource decay (PSD) fragmentation was used to confirm the correct assignment of PHMB structure for the dominant PHMB molecular ion. MALDI‐TOF MS analysis of a ¹⁵N‐labeled PHMB confirmed the correct assignment of PHMB molecular ions, and also indicated the existence of a polymerization–depolymerization equilibrium during melt polymerization of the polymer. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4928–4936, 2006     

Forgotten monomers: isotactic polymers from N‐benzyl‐3‐methylenepyrrolidin‐2‐one via free radical polymerization

N‐Benzyl‐3‐methylenepyrrolidin‐2‐one ( 3 ) was synthesized and homopolymerized under free radical conditions. The configurational microstructure of poly(N‐benzyl‐3‐methylenepyrrolidin‐2‐one) ( 4 ) is isotactic with a minor tendency to syndiotacticity. Monomer 3 was also homopolymerized in water in the presence of methylated β‐cyclodextrin. The glass transition temperature of 4 of 124 °C was compared with the lower value of 61 °C of the ring‐opened analogue poly(N‐benzyl‐N‐ethylacrylamide). © 2015 Society of Chemical Industry     

Highly trans‐1,4‐specific polymerization of 1,3‐butadiene catalyzed by [2,6‐bis{(4S)‐ (−)‐isopropyl‐2‐oxazolin‐2‐yl}pyridine] chromium complex activated with modified methylaluminoxane

Chromium complexes with N,N,N‐tridentate ligands, LCrCl₃ (L = 2,6‐bis{(4S)‐(?)‐isopropyl‐2‐oxazolin‐2‐yl}pyridine ( 1 ), 2,2′:6′,2″‐terpyridine ( 2 ), and 4,4′,4″‐tri‐tert‐butyl‐2,2′:6′,2″‐terpyridine ( 3 )), were prepared. The structures of 1 and 2 were determined by X‐ray crystallography. Upon activation with modified methylaluminoxane (MMAO), 1 catalyzed the polymerization of 1,3‐butadiene, while 2 and 3 was inactive. The obtained poly(1,3‐butadiene) obtained with 1 ‐MMAO was found to have completely trans‐1,4 structure. The 1 ‐MMAO system also showed catalytic activity for the polymerization of isoprene to give polyisoprene with trans‐1,4 (68%) and cis‐1,4 (32%) structure. Copyright © 2011 Society of Chemical Industry     

Multi‐Enzymatic Synthesis of Optically Pure β‐Hydroxy α‐Amino Acids

A novel enzymatic production system of optically pure β‐hydroxy α‐amino acids was developed. Two enzymes were used for the system: an N‐succinyl L ‐amino acid β‐hydroxylase (SadA) belonging to the iron(II)/α‐ketoglutarate‐dependent dioxygenase superfamily and an N‐succinyl L ‐amino acid desuccinylase (LasA). The genes encoding the two enzymes are part of a gene set responsible for the biosynthesis of peptidyl compounds found in the Burkholderia ambifaria AMMD genome. SadA stereoselectively hydroxylated several N‐succinyl aliphatic L ‐amino acids and produced N‐succinyl β‐hydroxy L ‐amino acids, such as N‐succinyl‐L ‐β‐hydroxyvaline, N‐succinyl‐L ‐threonine, (2S,3R)‐N‐succinyl‐L ‐β‐hydroxyisoleucine, and N‐succinyl‐L ‐threo‐β‐hydroxyleucine. LasA catalyzed the desuccinylation of various N‐succinyl‐L ‐amino acids. Surprisingly, LasA is the first amide bond‐forming enzyme belonging to the amidohydrolase superfamily, and has succinylation activity towards the amino group of L ‐leucine. By combining SadA and LasA in a preparative scale production using N‐succinyl‐L ‐leucine as substrate, 2.3 mmol of L ‐threo‐β‐hydroxyleucine were successfully produced with 93% conversion and over 99% of diastereomeric excess. Consequently, the new production system described in this study has advantages in optical purity and reaction efficiency for application in the mass production of several β‐hydroxy α‐amino acids.

     

Synthesis and characterization of α‐amino acid‐containing polyester: poly[(ε‐caprolactone)‐co‐(serine lactone)]

Novel polyesters, poly[(ε‐caprolactone)‐co‐(N‐trityl‐L ‐serine‐β‐lactone)]s, were prepared by copolymerizing ε‐caprolactone (CL) with N‐trityl‐L ‐serine‐β‐lactone (TSL) using ZnEt₂ as the catalyst. The number‐average molecular weights were determined which ranged from 2.7 × 10⁴ to 4.9 × 10⁴ Da with dispersity values ranging from 1.6 to 1.8. The structures of the copolymers were investigated by means of ¹H NMR, ¹³C NMR and infrared spectroscopies, thermogravimetric analysis and differential scanning calorimetry. The results indicated that CL and TSL monomer units were randomly distributed within the copolymer backbone structures and the ratios of TSL to CL in the copolymers were close to those in the feeds. After removal of the trityl group under mild condition, a new polyester with side amino groups provided by serine units was obtained. L929 cell culturing test indicated good biocompatibility of the polyester with or without protective groups. © 2012 Society of Chemical Industry     

Biodegradable poly(ester‐ether)s: ring‐opening polymerization of D,L‐3‐methyl‐1,4‐dioxan‐2‐one using various initiator systems

The synthesis and detailed characterization of racemic 3‐methyl‐1,4‐dioxan‐2‐one (3‐MeDX) are reported. The bulk ring‐opening polymerization of 3‐MeDX, to yield a poly(ester‐ether) meant for biomedical applications, in the presence of various initiators such as tin(II) octanoate, tin(II) octanoate/n‐butyl alcohol, aluminium tris‐isopropoxide and an aluminium Schiff base complex (HAPENAlOⁱPr) under varying experimental conditions is here detailed for the first time. Polymerization kinetics were investigated and compared with those of 1,4‐dioxan‐2‐one. The studies reveal that the rate of polymerization of 3‐MeDX is less than that of 1,4‐dioxan‐2‐one. Experimental conditions to achieve relatively high molar masses have been established. Thermodynamic parameters such as enthalpy and entropy of 3‐MeDX polymerization as well as ceiling temperature have been determined. Poly(D ,L ‐3‐MeDX) is found to possess a much lower ceiling temperature than poly(1,4‐dioxan‐2‐one). Poly(D ,L ‐3‐MeDX) was characterized using NMR spectroscopy, matrix‐assisted laser desorption ionization mass spectrometry, size exclusion chromatography and differential scanning calorimetry. This polymer is an amorphous material with a glass transition temperature of about ?20 °C. Copyright © 2010 Society of Chemical Industry     

Synthesis and characterization of degradable copoly(ester–amide)s: Poly(trans‐4‐hydroxy‐L‐proline‐co‐ε‐caprolactam)

Novel copolyesteramides were synthesized by reacting trans‐4‐hydroxy‐N‐benzyloxycarbonyl‐L ‐proline (N‐CBz‐Hpr) with ε‐caprolactam (CLM) in the presence of stannous octoate [Sn(II) Oct.] as a catalyst. Various techniques, including ¹H‐NMR, IR, DSC, and viscosity, were used to elucidate structural characteristics and thermal properties of the resulting copolymers. Data showed that the optimal reaction condition for the synthesis of the copolymers was obtained by using 3 wt % Sn(II) Oct. at 170°C for 24 h. The DSC analysis demonstrated amorphous structure for most of the copolymers. The glass‐transition temperature of the copolymers shifts to a higher temperature with increasing Hpr/CLM molar ratio. In vitro degradation of these poly(N‐CBz‐Hpr‐co‐CLM)s was evaluated by weight loss measurements. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1615–1621, 2002     

Drug‐delivery system based on core–shell‐type nanoparticles composed of poly(γ‐benzyl‐L‐glutamate) and poly(ethylene oxide)

A block copolymer based on poly(γ‐benzyl‐L ‐glutamate) (PBLG) as the hydrophobic part and poly(ethylene oxide) (PEO) as the hydrophilic part was synthesized and characterized. PBLG/PEO/PBLG (GEG) block copolymer nanoparticles were prepared using the dialysis technique. Fluorescence spectroscopy measurement suggested that GEG block copolymers were associated in water to form polymeric micelles and the critical micelle concentration (CMC) value of the GEG‐50 block copolymer was 0.0084 g/L. Particle‐size distribution of the GEG‐50 block copolymer based on the number average was 34.9 ± 17.6 nm. Also, the particle size and drug‐loading contents of GEG nanoparticles were significantly changed with the initial solvent used. From transmission electron microscope (TEM) observations, the GEG polymeric micelle was a nice spherical shape and the sizes ranged from approximately 20–60 nm in diameter. Results from assessing the drug‐loading contents against the initial solvent showed that the use of tetrahydrofuran (THF) or 1,4‐dioxane as the initial solvent resulted in higher drug‐loading contents than those of other solvents. In the drug‐release studies, the higher the molecular weight of the polymer and drug‐loading contents, the slower the drug release. Also, the initial solvent used was significantly affected not only in the drug‐loading contents but also in the drug‐release kinetics. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 1115–1126, 2000     

Synthesis and characterization of novel optically active poly(amide–imide)s containing N,N′‐(pyromellitoyl)‐bis‐L‐valine diacid chloride and 5,5‐disubstituted hydantoin derivatives under microwave irradiation

Pyromellitic dianhydride (1,2,4,5‐benzenetetracarboxylic acid 1,2,4,5‐dianhydide) was reacted with L ‐valine in a mixture of acetic acid and pyridine (3:2) at room temperature, and then was refluxed at 90–100 °C, N,N′‐(pyromellitoyl)‐bis‐L ‐valine diacid was obtained in quantitative yield. The imide–acid was converted to N,N′‐(pyromellitoyl)‐bis‐L ‐valine diacid chloride by reaction with thionyl chloride. Rapid and highly efficient synthesis of a number of poly(amide–imide)s was achieved under microwave irradiation using a domestic microwave oven by polycondensation of N,N′‐(pyromellitoyl)‐bis‐L ‐valine diacid chloride with six different derivatives of 5,5‐disubstituted hydantoin compounds in the presence of a small amount of a polar organic medium that acts as a primary microwave absorber. A suitable organic medium was o‐cresol. The polycondensation proceeded rapidly, compared with conventional melt polycondensation and solution polycondensation and was almost completed within 8 min, giving a series of poly(amide–imide)s with inherent viscosities in the range 0.15–0.36 dl g^?1. The resulting poly(amide–imide)s were obtained in high yield and are optically active and thermally stable. All of the above compounds were fully characterized by Fourier‐transform infrared (FT‐IR) spectroscopy, elemental analysis, inherent viscosity (η_inh) measurements, solubility testing and specific rotation measurements. The thermal properties of the poly(amide–imide)s were investigated by using thermogravimetric analysis. Copyright © 2004 Society of Chemical Industry     

Synthesis and characterization of α‐butyl‐omega‐{3‐[2‐hydroxy‐3‐(N‐methyl‐N‐hydroxy‐ ethylamino)propoxy]propyl}polydimethylsiloxane

A novel synthesis path for the monotelechelic polydimethylsiloxane with a diol‐end group, α‐butyl‐omega‐{3‐[2‐hydroxy‐3‐(N‐methyl‐N‐hydroxyethylamino)propoxy]propyl}polydimethylsiloxane, is described in this article. The preparation included three steps, which were anionic ring‐opening polymerization, hydrosilylation, and epoxy addition. The structure and polydispersity index of the products were analyzed and confirmed by FTIR, ¹H NMR, ¹³C NMR, H? H, and C? H. Correlated Spectroscopy and gel permeation chromatography. The results demonstrated that each step was successfully carried out and the targeted products were accessed in all cases. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010