Preparation of high molecular weight poly(vinyl alcohol) with high yield by emulsion polymerization of vinyl acetate using 2,2′‐azobis(2‐amidinopropane) dihydrochloride

To prepare high molecular weight (HMW) poly(vinyl acetate) (PVAc) with high yield and high linearity as a precursor of HMW poly(vinyl alcohol) (PVA), vinyl acetate (VAc) was emulsion polymerized using, azo initiator, 2,2′‐azobis(2‐amidinopropane) dihydrochloride (AAPH). This was compared with the polymerization using potassium peroxodisulfate (KPS) as an initiator at various polymerization conditions. PVA, having a maximum number average degree of polymerization (P_n) of 3500 was obtained by the saponification of PVAc with P_n of 13,000–14,000, degree of branching (DB) for the acetyl group of about 3.4–3.5, and a maximum conversion of VAc into PVAc of 95%, which was polymerized by AAPH. These numerical values were superior compared with 14,500–15,000 of P_n of PVAc, obtained by KPS, and 3100 of maximum P_n of resulting PVA, DB of about 3.7–3.8, and maximum conversion of 90%. From the foregoing experimental results, we found that AAPH was a more efficient initiator than KPS in increasing both conversion of PVAc and molecular weight of PVA. In addition, PVAc microspheres, obtained by these emulsion polymerizations, can be converted to PVA / PVAc shell / core microspheres through a series of surface‐saponifications, maintaining their spherical morphology. Various surface morphologies, such as flat or wrinkled and swellable or nonswellable ones formed by the various molecular parameters and saponification conditions, were examined. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2356–2362, 2004     

Preparation of high‐molecular‐weight poly(vinyl alcohol) with high yield by solution polymerization of vinyl acetate in methanol using 4,4′‐azobis(4‐cyanovaleric acid)

Vinyl acetate (VAc) was solution‐polymerized at 40°C and 50°C using 4,4′‐azobis(4‐cyanovaleric acid) (ACVA) as an initiator and methanol as a solvent, and effects of polymerization temperature and initiator concentration were investigated in terms of conversion of VAc into poly (vinyl acetate) (PVAc), degree of branching (DB) for acetyl group of PVAc, and molecular weights of PVAc and resulting poly(vinyl alcohol) (PVA) obtained by saponifying with sodium hydroxide. Slower polymerization rate by adopting ACVA and lower viscosity by methanol proved to be efficient in obtaining linear high‐molecular‐weight (HMW) PVAc with high conversion and HMW PVA. PVA having maximum number–average degree of polymerization (P_n) of 4300 could be prepared by the saponification of PVAc having maximum P_n of 7900 polymerized using ACVA concentration of 2 × 10^?5 mol/mol of VAc at 40°C. Moreover, low DB of below 1 could be obtained in ACVA system, nevertheless of general polymerization temperatures of 40°C and 50°C. This suggests an easy way for producing HMW PVA with high yield by conventional solution polymerization without using special methods such as low‐temperature cooling or irradiation. © 2006 Wiley Periodicals, Inc. J Appl PolymSci 102: 4831–4834, 2006     

Iodine reaction of vinyl acetate/vinyl propionate copolymers. III. Iodine affinities of the radically polymerized copolymers and the copolymers derived from partially saponified polyvinyl acetate

The minimum sequence lengths (n_c) of vinyl acetate (VAc) units necessary to form a colored iodine complex were determined to be 4 and 17 for radically polymerized VAc/vinyl propionate (VPr) and VAc/isopropenyl acetate (IPAc) copolymers, respectively. The iodine affinities (I/VAc) of VAc/VPr copolymers (SP-series) obtained by propionylation of partially saponified polyvinyl acetate (PVAc) were remarkably affected by the saponification conditions. An increase of the water content in acetone/water mixture as saponification solvent brought about a decrease of the iodine affinities of the SP-series. The dependence of the iodine affinity on the saponification of monomer units in the SP-series was compared with that in the radically polymerized VAc/VPr copolymers by taking the sequence probability as the measure of monomer unit distribution. The results strongly supported an occurence of the slide fastener reaction at high degrees of saponification, which was well-known in the saponification of PVAc. Furthermore, it was found that the saponification mode of PVAc at low degrees of saponification was influenced uniquely by the water content in saponification solvents and the saponification temperature.     

Preparation of poly(vinyl acetate) microspheres with narrow particle size distributions by low temperature suspension polymerization of vinyl acetate

To estimate influences of suspension polymerization conditions including conversion, polymerization temperature, stirring rate, initiator concentration, monomer concentration, and suspending agent concentration on the volume average diameter (D_avg) and particle size distribution (PSD) of poly(vinyl acetate) (PVAc) microspheres, vinyl acetate (VAc) was suspension‐polymerized at low temperature using 2,2′‐azobis(2,4‐dimethylvaleronitrile) as an initiator. The effects of each condition, on D_avg of PVAc microspheres, were expressed as follows, D_avg = [conversion]^a[temperature]^b[rpm]^c[ADMVN]^d[VAc]^f [suspending agent]^g. Logarithms of D_avg were linearly proportional to those of polymerization conditions, and their exponents, a, b, c, d, f, and g were calculated as 0.27, ?13.7, ?1.37, ?0.21, 0.58, and 0.29, respectively. Variations of PSDs, according to polymerization conditions, were examined by considering polymerization rate, droplet or suspension viscosity, and droplet break‐up/coagulation equilibrium. From these results, PVAc microspheres with various sizes and narrow PSDs were obtained effectively under carefully controlled polymerization conditions, which can be used as promising precursors of novel PVA microspheres through heterogeneous surface saponification. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4064–4070, 2006     

Rheological properties of high molecular weight (HMW) syndiotactic poly(vinyl alcohol) (PVA)/HMW atactic PVA blend solutions

To identify the effect of blend ratios of syndiotacticity‐rich poly(vinyl alcohol) (s‐PVA)/atactic PVA (a‐PVA) having similar number‐average degrees of polymerization (P_n)s of 4000 and degrees of saponification (DS)s of 99.9% on the rheological properties of s‐PVA/a‐PVA/water solutions, water‐soluble s‐PVA and a‐PVA with different syndiotactic diad contents of 58.5 and 54.0%, respectively, were prepared by bulk copolymerization of vinyl pivalate and vinyl acetate (VAc) and solution polymerization of VAc, followed by saponifying the corresponding copoly(vinyl pivalate/vinyl acetate) and poly(vinyl acetate). The blend ratios played a significant role in rheological behavior. Over the frequency range of 10^?1–10² rad/s, s‐PVA/a‐PVA blend solutions with larger s‐PVA content show more shear thinning at similar (P_n)s and (DS)s of polymer, suggesting that PVA molecules are more readily oriented as s‐PVA content increases. Yield stress is higher for s‐PVA/a‐PVA blend solutions with larger s‐PVA content at similar (P_n)s and (DS)s of polymer. This indicates that more domains with internal order are produced at larger s‐PVA content in s‐PVA/a‐PVA blend solutions. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3934–3939, 2006     

Preparation of novel syndiotactic poly(vinyl alcohol) microspheres through the low‐temperature suspension copolymerization of vinyl pivalate and vinyl acetate and heterogeneous saponification

Syndiotactic poly(vinyl alcohol) (PVA)/poly(vinyl pivalate/vinyl acetate) [P(VPi/VAc)] microspheres, with a skin–core structure, were prepared through the heterogeneous saponification of copolymers of vinyl pivalate (VPi) and vinyl acetate (VAc). For the preparation of P(VPi/VAc) microspheres with various particle sizes and a uniform particle size distribution (which are promising precursors of syndiotactic PVA embolic materials to be introduced through catheters for the management of gastrointestinal bleeders, arteriovenous malformations, hemangiomas, and traumatic rupture of blood vessels), VPi and VAc were suspension‐copolymerized at 30°C with a room‐temperature initiator, 2,2′‐azobis(2,4‐dimethylvaleronitrile). The effects of the polymerization conditions were investigated in terms of the size and size distribution of the suspension particles. P(VPi/VAc) microspheres, with various syndiotactic dyad (s‐dyad) contents, were produced through the control of the monomer feed ratio. In addition, monodisperse P(VPi/VAc) particles of various particle diameters were obtained by the separation and sieving of the polymerization product. Monodisperse P(VPi/VAc) microspheres of various particle sizes were partially saponified in the heterogeneous system, and the effects of the particle size and particle size distribution on the saponification rate were investigated in terms of the tacticity and the saponification time and temperature. Novel skin–core PVA/P(VPi/VAc) microspheres of various s‐dyad contents and degrees of saponification were successfully produced through the control of the various polymerization and saponification parameters. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1539–1548, 2005     

Effect of degree of saponification on the rheological properties of syndiotactic poly(vinyl alcohol)/ water solution

To identify the effect of degree of saponification (DS) of syndiotactic poly(vinyl alcohol)s (s‐PVA)s having similar tacticity and molecular weight on the rheological properties of s‐PVA/water solution, four kinds of (s‐PVA)s with assigned (DS)s, from 93.1 to 97.5%, were prepared by copolymerization of vinyl pivalate (VPi) and vinyl acetate (VAc), followed by saponifying the corresponding copoly(VPi/VAc). The DS played a significant role in rheological behavior. Over the frequency range of 10^?1 to 10² rad/s s‐PVA with higher DS shows more shear thinning at similar molecular weight and tacticity of polymer, suggesting that PVA molecules are more readily oriented as DS increases. This may provide indirect evidence of the spontaneous in situ orientation of s‐PVA molecules at the late stage of saponification. Yield stress is higher for s‐PVA with higher DS at similar molecular weight and tacticity of s‐PVA. This indicates that more domains with internal order are produced at higher saponification. These facts result from increase in stiffness of s‐PVA molecules with proceeding the saponification reaction. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 463–467, 2002     

Network formation and swelling behavior of photosensitive poly(vinyl alcohol) gels prepared by photogenerated crosslinking

Poly (vinyl alcohol) with pendent styrylpyridinium groups (SbQ) is insolubilized by photoirradiation. An association takes place in SbQ groups. The association of polymer chains becomes marked with increasing the number of SbQ groups. Mainly intermolecular crosslinks were formed. Transparent and homogeneous macrogels consisting of several intermolecular crosslinks are obtained. The proportion of the free water to the bound water in PVA-SbQ gels was 3.3?2.9 despite of the large change in conversion of photodimerization of SbQ groups, x=0.27?0.58. The water uptake after swelling of the gels in water increased 6–27 times compared to the original weight at pH=7. The higher the degree of photocrosslinking, the lower was the degree of swelling. The water diffusion coefficients, D, were (2.2?5.8) × 10^?5 cm² S^?1 for a 88% saponified PVA with 1 . 3 mol% SbQ groups. The volume of the gel increased discontinuously about 10-fold for the 99% saponified PVA with 0 . 096 mol% SbQ and 51% water (49% acetone). The acetone concentration at the transition decreased with increasing the degree of saponification of the PVA.     

Preparation and structure of poly(vinyl alcohol)–poly(vinyl acetate) composite porous membrane

The preparation of poly(vinyl alcohol) (PVA)–poly(vinyl acetate) (PVAc) composite porous membrane was investigated by extracting PVAc with solvent from films of PVAc lattices which were obtained by the emulsion polymerization of vinyl acetate (VAc) in the presence of PVA. The formation of the porous membrane depended upon whether or not PVAc in the latex film was easily extracted with solvent. In the case of using hydrogen peroxide (HPO)–tartaric acid (TA) as an initiator, in the film of the latex which was produced from the batch method in which all ingredients of the batch were put into the reaction vessel before starting polymerization, PVAc could be extracted over 90% of total PVAc with common organic solvents. In the film of the latex which was produced from the dropwise addition method of VAc and initiator, the PVAc extraction was about 20-30%. On the other hand, in the case of using ammonium persulfate as an initiator, the desired porous membrane was not obtained. The structure of the porous membrane obtained from the latex of the batch method by using HPO—TA consisted of spherical cells which were made up of PVA and grafted PVAc or insoluble PVAc like microgels, which were not extracted with organic solvent and were connected by small pores. The PVA—PVAc composite porous membrane is permeated by n-hexane with 5.58 × 10² mL/cm²·s at 0.5 kg/cm², by benzene with only 1.33 × 10^?3mL/cm²·s even at 60 kg/cm².     

Structure and properties of syndiotacticity‐rich poly(vinyl alcohol) prepared through saponification of drawn poly(vinyl trifluoroacetate) with gaseous ammonia

The structure and properties of syndiotacticity‐rich poly(vinyl alcohol) (s‐PVA) prepared through the saponification of drawn poly(vinyl trifluoroacetate) (PVTFAc) with gaseous ammonia were studied. The PVTFAc samples with s‐diad % of 59 and 64 were used. The s‐PVAs had low densities and showed X‐ray diagrams similar to the fiber diagram of PVA with indistinct 100, 101, 101¯, and 200 plane reflections and without the plane reflections seen at the equator of a typical fiber diagram, such as 001, 201, and 002. The s‐PVAs had melting points comparable to those of saponified and heat‐drawn samples, indicating a PVA with the typical fiber structure as seen in the X‐ray diagram of a sample. The intensity of the 916 cm⁻¹ band in the infrared spectrum related to syndiotactic diads decreased with drawing, suggesting an increase in the crystallinity. Crystals with more defects are thought to be produced in saponification. The s‐PVA films drawn 16 times and saponified had a Young's modulus and strength at break of 22 and 1.5 GPa for the sample from S‐59 and 14 and 1.2 GPa for the sample from S‐64, respectively. The crystallization‐sensitive band of 1145 cm⁻¹ in the infrared spectra of the saponified samples was weak. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 467–474, 2001     

Structure of poly(vinyl alcohol)-iodine complex formed in the amorphous phase of poly(vinyl alcohol) films

The effect of syndiotactivity of poly(vinyl alcohol) (PVA) both on the formation and thermal stability of the complex formed in the amorphous phase of PVA films is investigated, and then a model of the complex is presented. The amount of the complex formed in syndiotacticity-rich PVA is much larger than that formed in atactic PVA under a given iodine-soaking condition, and the former complex has a higher thermal stability in the soaking solution than the latter. The complex formed in the amorphous phase is proposed to have such a structure as that in which a linear polyiodine I₅^? or I₅^? with a 3.1 A? periodicity is enveloped by four PVA segments of syndiotactic configuration with extended conformation. In this model, these four PVA chains participating in a complex are supposed to be fixed by interchain hydrogen bonds. The observed X-ray meridional intensity curve of iodinated PVA film can be explained by a series of two I₅^?. © 1993 John Wiley & Sons, Inc.     

Iodine reaction of vinyl acetate — vinyl propionate copolymers II. Dependence of iodine affinities of the copolymers on the sequence distribution of vinyl acetate-units

The reactions of iodine with vinyl acetate (VAc) — vinyl propionate (VPr) copolymers in aqueous solutions of potassium iodide were investigated photometrically. The iodine affinity (I/VAc) of VAc-units was defined as the number of bound iodine atoms per VAc-unit and determined from the absorbance of the formed colored complex. The dependence of the I/VAc values on the copolymer composition was discussed with respect to the sequence distribution of VAc-units in the copolymer chains. The dependence of the I/VAc value on the copolymer composition of block copolymers provided a useful information concerning the saponification of PVAc because the here used block copolymers were prepared by propionylation of partially saponified PVAc.     

Preparation of high molecular weight poly(vinyl alcohol) with high yield using low‐temperature solution polymerization of vinyl acetate

Vinyl acetate (VAc) was solution‐polymerized in tertiary butyl alcohol (TBA) and in dimethyl sulfoxide (DMSO) having low chain transfer constant at 30, 40, and 50°C, using a low temperature initiator, 2,2′‐azobis(2,4‐dimethylvaleronitrile) (ADMVN). The effects of polymerization temperature and initiator concentration were investigated in terms of polymerization behavior and molecular structures of poly(vinyl acetate) (PVAc) and corresponding poly(vinyl alcohol) (PVA) obtained by saponification with sodium hydroxide. The polymerization rates of VAc in TBA and in DMSO were proportional to the 0.49 and 0.72 powers of ADMVN concentration, respectively. For the same polymerization conditions, TBA was absolutely superior to DMSO in increasing the molecular weight of PVA. In contrast, TBA was inferior to DMSO in causing conversion to polymer, indicating that the initiation rate of VAc in TBA was lower than that in DMSO. These effects could be explained by a kinetic order of ADMVN concentration calculated using initial rate method and by an activation energy difference of polymerization obtained from the Arrhenius plot. Low‐temperature solution polymerization of VAc in TBA or DMSO by adopting ADMVN proved successful in obtaining PVA of high molecular weight (number–average degree of polymerization (P_n): 4100–6100) and of high yield (ultimate conversion of VAc into PVAc: 55–80%) with diminishing heat generated during polymerization. In the case of bulk polymerization of VAc at the same conditions, maximum P_n and conversion of 5200–6200 and 20–30% was obtained, respectively. The P_n and lightness were higher, and the degree of branching was lower with PVA prepared from PVAc polymerized at lower temperatures in TBA. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1003–1012, 2001     

Preparation and Molecular Structure of Poly(Vinyl Alcohol) by Low Temperature Bulk Polymerization of Vinyl Acetate and Saponification

Abstract

Vinyl acetate (VAc) was bulk-polymerized at 30, 40 and 50°C using a low temperature initiator, 2,2′-azobis(2,4-dimethylvaleronitrile) (ADMVN), and effects of polymerization temperature and initiator concentration were investigated in terms of polymerization behavior and molecular structures of poly(vinyl acetate) (PVAc) and corresponding poly(vinyl alcohol) (PVA) obtained by saponifying it with sodium hydroxide. Low polymerization temperature and low conversion by adopting ADMVN proved to be successful in obtaining PVA of high molecular weight. PVAc having number-average degree of polymerization (P_n ) of 6,800–10,100 was obtained, whose degree of branching for acetyl group of 0.6–0.7 at 30°C, 0.8–1.1 at 40°C, and 1.0–1.9 at 50°C at conversion of below 40%. Saponifying so prepared PVAc yielded PVA having P_n of 3,100–6,200, and syndiotactic diad (S-diad) content of 51–53%. The whiteness, S-diad content, and crystal melting temperature were higher with PVA prepared from PVAc polymerized at lower temperatures.     

Synthesis of high-molecular weight poly(vinyl alcohol) by low-temperature emulsifier-free emulsion polymerization of vinyl acetate and saponification

High-molecular weight (HMW) poly(vinyl alcohol) (PVA) was prepared via an emulsifier-free emulsion polymerization of vinyl acetate (VAc) using a redox initiation system in low temperatures, and the subsequent saponification with potassium hydroxide in methanol. The effect of the polymerization conditions on the conversion, molecular weight, and branching degree was investigated. PVA with maximum viscosity-average degree of polymerization (DP) of 8270 could be prepared by saponification of poly(vinyl acetate) (PVAc), with DP of 10,660 obtained at temperature of 10°C, monomer concentration of 30%, potassium persulfate molar ratio to monomer of 1/2000, agitation speed of 160 rpm. The conversion was above 90%. From the emulsifier-free emulsion polymerization of VAc in low temperature, PVAc with HMW and high linearity was effectively prepared, which might be useful for the preparation of high-strength and high-modulus PVA fiber. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Application of the taguchi approach to investigate the effects of clay content and saponification parameters on the tensile properties of poly(vinyl alcohol)/clay nanocomposites

Poly(vinyl alcohol) (PVA)/montmorillonite nanocomposites were prepared via solution polymerization. The nanocomposites were formed either by first hydrolyzing poly(vinyl acetate) (PVAc) to PVA and then preparing the PVA/clay, or by initially preparing PVAc/clay and then hydrolyzing the matrix to PVA. The morphology of the nanocomposites was examined by X‐ray diffraction and transmission electron microscopy, which suggested the proper dispersion of silicate layers within the PVA matrix. The influences of some variables including method of preparation, clay content, and time and temperature of saponification on the tensile properties (elastic modulus, stress and elongation at break) of the nanocomposite samples were investigated by using the Taguchi experimental design approach. The results indicated that the tensile properties of the nanocomposites improved as clay content, and the temperature and time of saponification increased. Effect of each factor on the ultimate properties of as prepared nanocomposites are discussed in detail. The analysis of variance (ANOVA) showed that the method of preparation did not influence the ultimate tensile properties of the nanocomposite samples. Thermal degradation of the nanocomposites was studied by thermogravimetric analysis, which showed that their thermal stability was higher than that of virgin polymer. J. VINYL ADDIT. TECHNOL., 19:276–284, 2013. © 2013 Society of Plastics Engineers     

PVAc Microspheres via Semicontinuous Emulsion Polymerization: Synthesis,Characterization, Kinetic,and Surface Morphology Studies

Poly (vinyl acetate) (PVAc) latexes are economically important products with many desirable features. They are used as adhesives for porous materials in various processing stages of industries. Synthesis parameters have an important role on the physico-chemical properties of PVAc latexes such as: viscosity, average molecular weight, degree of polymerization, and surface morphology. In this work, PVAc was prepared via semicontinous emulsion polymerization (delayed monomer and initiator addition process) in the presence of ammonium persulfate (APS) as conventional anionic initiator, poly (vinyl alcohol) (PVA) as stabilizer, and sodium lauryl sulfate (SLS) as anionic emulsifier. The surface morphology of PVAc microspheres was, examined using a scanning electron microscope (SEM) and atomic force microscope (AFM). It is evident from the SEM photographs that all the particles became microspheres and are uniform in shape. The use of AFM for imaging of polyvinyl acetate confirms a typical sphere polymer. The effect of changes in the different parameters such as concentration of emulsifier, initiator concentration, and presence or absence of buffer on the vinyl acetate (VAc) conversion, the steady state polymerization rate, the viscosity-average molecular weight, and the final latex viscosity of synthesized PVAc were investigated. The effects of anionic emulsifier on the synthesized PVAc are also compared with those obtained by the nonionic emulsifier. The comparison indicated that the VAc monomer conversion and the final latex viscosity of the anionic system were higher than for the nonionic system but the viscosity-average polymer molecular weight of the anionic system was lower than that of the nonionic system. The adhesive strength of the synthesized PVAc latex was examined and the load and deflection data were reported.     

Permeation characteristics of poly(vinyl alcohol)–poly(vinyl acetate) composite porous membranes

Poly(vinyl alcohol) (PVAc) composite porous membrane has been prepared from PVAc latex film by extraction with acetone. The PVAc latex was prepared by emulsion polymerization of vinyl acetate in the presence of PVA, employing the hydrogen peroxide–tartaric acid systemm as an initiator. The extraction degree of PVAc could be controlled in a wide range by changing the addition method of the initiator, and, acoordingly, PVA–PVAc omposite porous membranes which had variosu void volumes were obtained. The maximum void volume attained was ca. 90%. Permation characteristics of organic solvents wre investigated on the membranes whose extraction degrees were 95.6% and 80.7%. Thge feeds were benzene, n-hexane, cyclohexane, and their mixtures. neither swelling nor shrinkage in tje appearance size of the while benzene hardly permeated even at 20 kg/cm². The grafted PVAc in the mebrane was removed or converted into grafted PVA by treatment with sodium methylate, and then the depression of benzene permeation was lost. The grafted PVAc was suggested to be localizd on the cell wall and was found to function as a valve which closes with nenzene or a good solvent for PVAc and opens with n-haxane or a poor solvent for PVAc.     

Preparation of water‐soluble syndiotacticity‐rich high molecular weight poly(vinyl alcohol) microfibrillar fibers using copolymerization of vinyl pivalate and vinyl acetate and saponification

Water‐soluble high molecular weight (HMW) syndiotactic poly(vinyl alcohol) (s‐PVA) microfibrillar fibers were prepared by the saponification with various conditions such as amount of alkali solution, saponification temperature, and saponification concentration from copoly(vinyl pivalate (VPi)/vinyl acetate (VAc)) copolymerized using various VPi/VAc feed ratios. To produce s‐PVA microbrillar fibers having various water‐soluble temperatures for many industrial applications, the intrinsic viscosities, syndiotactic diad (S‐diad) contents, and degrees of saponification (DS)s of PVAs were finely controlled to 1.2–3.6 dL/g, 56.3–58.3%, and 91.4–98.3%, respectively. Through a series of experiments, it was found that the amount of alkali may alter the structure of the saponified polymers, primarily the DS, and the structural variation changes viscosity. That is, intrinsic viscosity was sharply decreased as the amount of alkali solution was increased. DS was increased with an increase in the amount of alkali solution. S‐diad content was increased with an increase in the VPi content. HMW s‐PVA microfibrillar fibers having S‐diad content of 56.3–58.3% prepared by the saponification of copoly(VPi/VAc) were completely soluble in water at 100°C. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1482–1487, 2003     

Rheological properties of water solutions of syndiotactic poly(vinyl alcohol) of different molecular weights

To precisely identify the effect of the molecular weight of syndiotacticity‐rich poly(vinyl alcohol) (s‐PVA) on the rheological properties of s‐PVA/water solutions, we prepared four s‐PVAs with a syndiotactic dyad content of 57%, a degree of saponification (DS) of 99.9%, and number‐average degrees of polymerization (P_n's) of 300, 1300, 2700, and 4000. Through a series of experiments, we found that the molecular weight of poly(vinyl alcohol) had a significant influence on the rheological properties of s‐PVA/water solutions. Over a frequency range of 10^?1 to 10² rad/s, the s‐PVA/water solution with the highest P_n value showed the largest values of the complex viscosity, storage modulus, and loss modulus at similar syndiotacticity and DS values of s‐PVA, and this suggested that the higher P_n was, the stronger the internal ordered structure was in the molecules. All the s‐PVA/water solutions showed shear‐thinning behavior, which implied heterogeneity. In a modified Casson plot, Bingham flow behaviors, which gave rise to non‐zero yield stress, were evident. This suggested that some pseudostructure existed in the s‐PVA/water solutions. The yield stress increased with P_n, and this implied that the pseudostructure was developed as P_n increased. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1426–1431, 2004