Adsorption of some heavy metal ions from aqueous solutions on Nafion 117 membrane

Nafion 117 membrane was investigated for the removal of Ni(II), Co(II), Pb(II), Cu(II) and Ag(I) metal ions from their synthesized aqueous solutions. The different variables affecting the adsorption capacity of the membrane such as contact time, initial metal ion concentration in the feed solution, pH of the sorption medium and temperature of the solution were investigated on a batch sorption basis. The affinity of Nafion 117 membrane towards heavy metal ions was found to increase in the sequence of Cu(II), Ni(II), Co(II), Pb(II), and Ag(I) with adsorption equilibrium achieved after 30 min for all metal ions. Among all parameters, pH has the most significant effect on the adsorption capacity, particularly in the range of 3.1-5.9. The variation of temperature in the range of 25-65 °C was found to have no significant effect on the adsorption capacity. Nafion 117 membrane was found to have high stability combined with repeated regeneration ability and can be suggested for effective removal of heavy metal ions such as Cu(II), Ni(II) and Co(II) from aqueous solutions.     

Rapid Adsorption of Heavy Metals by Fe3O4/Talc Nanocomposite and Optimization Study Using Response Surface Methodology

Fe₃O₄/talc nanocomposite was used for removal of Cu(II), Ni(II), and Pb(II) ions from aqueous solutions. Experiments were designed by response surface methodology (RSM) and a quadratic model was used to predict the variables. The adsorption parameters such as adsorbent dosage, removal time, and initial ion concentration were used as the independent variables and their effects on heavy metal ion removal were investigated. Analysis of variance was incorporated to judge the adequacy of the models. Optimal conditions with initial heavy metal ion concentration of 100, 92 and 270 mg/L, 120 s of removal time and 0.12 g of adsorbent amount resulted in 72.15%, 50.23%, and 91.35% removal efficiency for Cu(II), Ni(II), and Pb(II), respectively. The predictions of the model were in good agreement with experimental results and the Fe₃O₄/talc nanocomposite was successfully used to remove heavy metals from aqueous solutions.     

Preparation of amidoximated polyester fiber and competitive adsorption of some heavy metal ions from aqueous solution onto this fiber

In this study, a fibrous adsorbent containing amidoxime groups was prepared by graft copolymerization of acrylonitrile (AN) onto poly(ethylene terephthalate) (PET) fibers using benzoyl peroxide (Bz₂O₂) as initiator in aqueous solution, and subsequent chemical modification of cyano groups by reaction with hydroxylamine hydrochloride in methanol. The grafted and modified fibers were characterized by FTIR, TGA, SEM, and XRD analysis. The crystallinity increased, but thermal stability decreased with grafting and amidoximation. The removal of Cu(II), Ni(II), Co(II), Pb(II), and Cd(II) ions from aqueous solution onto chelating fibers were studied using batch adsorption method. These properties were investigated under competitive conditions. The effects of the pH, contact time, and initial ion concentration on the removal percentage of ions were studied. The results show that the adsorption rate of metal ions followed the given order Co(II) > Pb(II) > Cd(II) > Ni(II) > Cu(II). The percentage removal of ions increased with initial ion concentration, shaking time, and pH of the medium. Total metal ion removal capacity was 49.75 mg/g fiber on amidoximated fiber. It was observed that amidoximated fibers can be regenerated by acid without losing their activity, and it is more selective for Pb(II) ions in the mixed solution of Pb‐Cu‐Ni–Co‐Cd at pH 4. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation and Characterization of Charred Xanthated Sugarcane Bagasse for the Separation of Heavy Metals From Aqueous Solutions

Introduction of xanthate group onto sugarcane (Saccharum officinarum) bagasse has been investigated for the removal of cadmium, lead, nickel, zinc, and copper from their aqueous media. The charred xanthated sugarcane bagasse (CXSB) was found to have significant adsorption capacity which is more than that of various bio-sorbents mentioned in the available literatures. The newly developed bio-sorbent was characterized by SEM, FTIR, TGA/DTA, and elemental analysis. The velocity of sorption of the tested metals was fast, reaching equilibrium within 40 min. The maximum loading capacities was found to be 225 for Cd(II), 318 for Pb(II), 144 for Ni(II), 164 for Zn(II), and 178 for Cu(II) mg g^?1, respectively. The fast kinetics results and high adsorption capacity indicated that CXSB can be applied as the selective adsorbent for the treatment of heavy metal ions from aqueous solutions.     

Heavy metals adsorption on some iminodiacetate chelating resins as a function of the adsorption parameters

The adsorption properties of some novel chelating resins (CRs) bearing iminodiacetate groups for removal of heavy metal ions like: Cu(II), Co(II) and Ni(II) from aqueous solutions comparative with the commercial resin Amberlite IRC-748 have been studied in this work by a batch equilibrium technique. Quantitative analysis for adsorption was conducted using UV–vis spectroscopy to investigate the kinetics, adsorption isotherm and thermodynamics of the removal process considering equilibration time, pH, metal ion concentration and temperature as controlling parameters. The metal adsorption capacities, at pH 5, were in the order Cu(II) > Ni(II) > Co(II), for both the CR with 10 wt.% DVB (CR-10) and the commercial resin Amberlite IRC-748. The adsorption capacities on CR-10 were higher for Ni(II) and Co(II) ions, but lower for Cu(II) ions compared with Amberlite IRC-748. Both Freundlich and Langmuir isotherms well fitted on the adsorption results of Cu(II), Ni(II) and Co(II) ions on all iminodiacetate resins.     

Removal of Ni(II), Cd(II), and Pb(II) from a ternary aqueous solution by amino functionalized mesoporous and nano mesoporous silica

In the present study, the application for the removal of Ni(II), Cd(II) and Pb(II) ions from aqueous solution by using mesoporous silica materials, namely, MCM-41, nanoparticle of MCM-41, NH₂-MCM-41 (amino functionalized MCM-41) and nano NH₂-MCM-41 was investigated. Suitable adsorbents preparation techniques were developed in the laboratory. The effects of the solution pH, metal ion concentrations, adsorbent dosages, and contact time were studied. It was found that NH₂-MCM-41 showed the highest uptake for metal ions in aqueous solution. The results indicated that the adsorption of Ni(II), Cd(II) and Pb(II) ions on the surface of the adsorbent was increased with increasing solution pH. The experimental data were analyzed using the Langmuir and Freundlich equations. Correlation coefficients were determined by analyzing each isotherm. It was found that the Langmuir equation showed better correlation with the experimental data than the Freundlich. According to the parameters of the Langmuir isotherm, the maximum adsorption capacity of NH₂-MCM-41 for Ni(II), Cd(II) and Pb(II) was found to be 12.36, 18.25 and 57.74 mg/g, respectively. The kinetic data of adsorption reactions and the evaluation of adsorption equilibrium parameters were described by pseudo-first-order and pseudo-second-order equations. The synthesized solid sorbents were characterized by Fourier transform infrared (FT-IR) spectrometry, X-ray diffraction (XRD), scanning electron microscopy (SEM) and nitrogen sorption measurements.     

A new functionalized reduced graphene oxide adsorbent for removing heavy metal ions in water via coordination and ion exchange

ABSTRACT

Heavy metal ion pollution has become a serious problem. In this paper, a new type of adsorbent, reduced graphene oxide grafted by 4-sulfophenylazo groups (RGOS), was synthesized to adsorb heavy metal ions in an aqueous solution via two kinds of adsorption modes, ion exchange and coordination. The maximum adsorption capacities of the RGOS for Pb(II), Cu(II), Ni(II), Cd(II) and Cr(III) were 689, 59, 66, 267 and 191 mg/g, respectively. Adsorption equilibrium time of RGOS for heavy metal ions is no more than 10 min. Adsorption mechanism was supposed based on elemental analyses, adsorption data, and Fourier transform infrared spectra.     

Adsorption of Cr(III), Ni(II), Zn(II), Co(II) ions onto phenolated wood resin

In this study, phenolated wood resin was used an adsorbent for the removal of Cr(III), Ni(II), Zn(II), Co(II) ions by adsorption from aqueous solution. The adsorption of metal ions from solution was carried at different contact times, concentrations and pHs at room temperature (25°C). For individual metal ion, the amount of metal ions adsorbed per unit weight of phenolated wood resin at equilibrium time increased with increasing concentration and pH. Also, when the amounts of metal ions adsorbed are compared to each other, it was seen that this increase was order of Cr(III) > Ni(II) > Zn(II) > Co(II). This increase was order of Cr(III) > Ni(II) > Co(II) > Zn(II) for commercial phenol–formaldehyde resin. Kinetic studies showed that the adsorption process obeyed the intraparticle diffusion model. It was also determined that adsorption isotherm followed Langmuir and Freundlich models. Adsorption isotherm obtained for commercial phenol–formaldehyde resin was consistent with Freundlich model well. Adsorption capacities from Langmuir isotherm for commercial phenol–formaldehyde resin were higher than those of phenolated wood resin, in the case of individual metal ions. Original adsorption isotherm demonstrated the monolayer coverage of the surface of phenolated wood resin. Adsorption kinetic followed the intraparticle diffusion model. The positive values of ΔG° determined using the equilibrium constants showed that the adsorption was not of spontaneous nature. It was seen that values of distribution coefficient (K_D) decreasing with metal ion concentration in solution at equilibrium (C_e) indicated that the occupation of active surface sites of adsorbent increased with metal ions. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2838–2846, 2006     

Synthesis and characterization of polyacrylamide‐grafted coconut coir pith having carboxylate functional group and adsorption ability for heavy metal ions

The present investigation was undertaken to evaluate the effectiveness of a new adsorbent prepared from coconut coir pith (CP), a coir industry‐based lignocellulosic residue in removing metal ions from aqueous solutions. The adsorbent (PGCP‐COOH) having a carboxylate functional group at the chain end was prepared by grafting polyacrylamide onto CP using potassium peroxydisulphate as an initiator and in the presence of N,N′‐methylenebisacrylamide as a crosslinking agent. The adsorbent was characterized by infrared (IR) spectroscopy, thermogravimetry (TG), X‐ray diffraction (XRD) patterns, scanning electron microscopy (SEM), and potentiometric titration. The adsorbent exhibits very high adsorption potential for the removal of Pb(II), Hg(II), and Cd(II) ions from aqueous solutions. The optimum pH range for metal ion removal was found to be 6.0–8.0. The adsorption process follows a pseudo‐second‐order kinetic model. The adsorption capacities for Hg(II), Pb(II), and Cd(II) calculated using the Langmuir isotherm equation were 254.52, 189.49, and 63.72 mg g^?1, respectively. Adsorption isotherm experiments were also conducted for comparison with a commercial carboxylate form cation exchanger. Different industry wastewater samples were treated by the PGCP‐COOH to demonstrate its efficiency in removing heavy metals from wastewater. The reusability of the PGCP‐COOH was also demonstrated using 0.2M HCl. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 3670–3681, 2007     

Removal properties of crosslinked poly(2‐acrylamido glycolic acid) for trace heavy metal ions: Effect of pH,temperature, contact time,and salinity on the adsorption behavior

Crosslinked poly(2‐acrylamido glycolic acid) resin was synthesized by radical polymerization. This resin contains three potential ligand groups and was studied as an adsorbent of trace heavy metal ions from a saline aqueous solution and sea water by using the Batch equilibrium procedure. Adsorption characteristics of the resin toward Cu(II), Ni(II), Cd(II), and Pb(II) were studied spectrophotometrically, both in competitive and noncompetitive conditions. The effect of pH, contact time, amount of sorbent, temperature, and salinity were studied. The resin showed a high affinity particularly for Ni(II). It was possible to remove completely Ni(II) and Pb(II) from the resin by 4M HNO₃. The retention properties of the resin were also investigated for Cu(II) contained in natural sea waters. The retention behavior was similar to that of the synthetic metal ion aqueous solution. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2614–2621, 2003     

Investigation of adsorption of lead,mercury and nickel from aqueous solutions onto carbon aerogel

Recently a new form of activated carbon has appeared: carbon aerogel (CA). Its use for the removal of inorganic (and especially metal ions) has not been studied. In the present study, the adsorption of three metal ions, Hg(II), Pb(II) and Ni(II), onto carbon aerogel has been investigated. Batch experiments were carried out to assess adsorption equilibria and kinetic behaviour of heavy metal ions by varying parameters such as agitation time, metal ions' concentration, adsorbent dose and pH. They facilitated the computation of kinetic parameters and maximum metal ion adsorption capacities. Increasing the initial solution pH (2–10) and carbon concentration (50–500 mg per 50 cm³) increases the removal of all three metal ions. A decrease of equilibrium pH with an increase of metal ion concentration led us to propose an adsorption mechanism by ion exchange between metal cations and H⁺ at the carbon aerogel surface. Carboxylic groups are especially involved in this adsorption mechanism. Langmuir and Freundlich isotherm models were used to analyse the experimental data of carbon aerogel. The thermodynamics of the metal adsorption was also investigated for the practical implementation of the adsorbent. The sorption showed significant increase with increase of temperature. Kinetics models describing the adsorption of Hg(II), Pb(II) and Ni(II) ions onto carbon aerogel have been compared. Kinetics models evaluated include the pseudo‐first order and second order model. The parameters of the adsorption rate constants have been determined and the effectiveness of each model assessed. The result obtained showed that the pseudo‐second order kinetic model correlated well with the experimental data and better than the pseudo‐first order model examined in the study. Mass transfer coefficients obtained can be useful in designing wastewater treatment systems or in the development of environmental technologies. Copyright © 2005 Society of Chemical Industry     

Heavy metals uptake from aqueous solutions and industrial wastewaters by humic acid-immobilized polymer/bentonite composite: Kinetics and equilibrium modeling

This study explored the feasibility of utilizing a novel adsorbent, humic acid-immobilized-amine-modified polyacrylamide/bentonite composite (HA-Am-PAA-B) for the adsorption of Cu(II), Zn(II) and Co(II) ions from aqueous solutions. The FTIR and XRD analyses were done to characterize the adsorbent material. The effects of pH, contact time, initial adsorbate concentration, ionic strength and adsorbent dose on adsorption of metal ions were investigated using batch adsorption experiments. The optimum pH for Cu(II), Zn(II) and Co(II) adsorption was observed at 5.0, 9.0 and 8.0, respectively. The mechanism for the removal of metal ions by HA-Am-PAA-B was based on ion exchange and complexation reactions. Metal removal by HA-Am-PAA-B followed a pseudo-second-order kinetics and equilibrium was achieved within 120 min. The suitability of Langmuir, Freundlich and Dubinin-Radushkevich adsorption models to the equilibrium data was investigated. The adsorption was well described by the Langmuir isotherm model. The maximum monolayer adsorption capacity was 106.2, 96.1 and 52.9 mg g^?1 for Cu(II), Zn(II) and Co(II) ions, respectively, at 30 °C. The efficiency of HA-Am-PAA-B in removing metal ions from different industry wastewaters was tested. Adsorbed metal ions were desorbed effectively (97.7 for Cu(II), 98.5 for Zn(II) and 99.2% for Co(II)) by 0.1 M HCl. The reusability of the HA-Am-PAA-B for several cycles was also demonstrated.     

Removal Characteristics of Cd(II), Cu(II), Pb(II), and Zn(II) by Natural Mongolian Zeolite through Batch and Column Experiments

The removal characteristics of Cd(II), Cu(II), Pb(II), and Zn(II) from model aqueous solutions by 5 natural Mongolian zeolites were investigated. The adsorption of metals on zeolites reached a plateau value within 6 h. The adsorption kinetic data were fitted with adsorption kinetic models. The equilibrium adsorption capacity of the zeolites was measured and fitted using Langmuir and Freundlich isotherm models. The order of adsorption capacity of zeolite was Pb(II) > Zn(II) > Cu(II) > Cd(II). The maximum adsorption capacity of natural zeolite depends on its cation exchange capacity and pH. The leaching properties of metals were simulated using four leaching solutions. The results show that natural zeolite can be used as an adsorbent for metal ions from aqueous solutions or as a stabilizer for metal-contaminated soils.     

Removal of heavy metal ions from aqueous solution by multi-walled carbon nanotubes modified with 8-hydroxyquinoline: Kinetic study

Carbon nanotubes were modified with 8-hydroxyquinoline and used for the removal of Cu(II), Pb(II), Cd(II), and Zn(II) from aqueous solutions. Different instrumentation parameters and methods of development for determining metal ions from aqueous solutions using differential pulse anodic stripping voltammetry were studied. The adsorption of heavy metals from aqueous solution by the pristine and modified MWCNTs was studied kinetically using different kinetic models, and the results showed that the adsorption process best fitted the pseudo-second-order model and the Elovich model. The mechanism of adsorption was explored using the intra-particle diffusion model and the liquid-film model.     

A novel lead ion‐imprinted chelating nanofiber: Preparation,characterization, and performance evaluation

A novel Pb(II) ion‐imprinted chelating nanofibers (nIIP), synthesized by combining electrospinning with surface ion imprinting technique, was reported in this study. nIIP was characterized with Fourier transmission infrared spectrometry and scanning electron microscopy, respectively. The performance of nIIP for Pb(II) sorption was conducted through a batch adsorption experiments. Experimental data showed that adsorption capacity of nIIP was much higher than that of non‐ion imprinted chelating acrylic microfibers (mNIP) derived from commercial available acrylic microfibers, and adsorption behaviors agreed well with pseudo‐second‐order kinetic and Langmuir isotherm model. The values of Gibbs free energy change derived from experimental data suggested that the adsorption Pb(II) on nIIP is spontaneous and favorable at high temperature. In addition, nIIP had the highest selectivity among three tested fibrous adsorbents for Pb(II) from binary metal solution, the selectivity coefficients for Pb(II) from binary metal solution of Pb(II)/Cu(II), Pb(II)/Ni(II), and Pb(II)/Cd(II) onto nIIP were 47, 101, and 162, respectively. Besides, a forty adsorption/desorption cycles revealed that nIIP was a promising recyclable adsorbent. In conclusion, the novel nIIP is a highly effective adsorbent for enrichment and separation of Pb(II) in the presence of competitive ions in aqueous solution, and it is potential to be applied for recovering metals from heavy metal polluted industrial wastewater such as Pb(II)/Cd(II), Pb(II)/Ni(II), and Pb(II)/Cu(II) polluted wastewater. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41507.     

Experimental study on functional graphene oxide containing many primary amino groups fast-adsorbing heavy metal ions and adsorption mechanism

Highly oxygenated graphene oxide was synthesized. Ethylenediamino graphene oxide (EDAGO) with many amino and hydroxyl groups was prepared for adsorbing heavy metal ions in wastewater. The maximum adsorption capacities of EDAGO for Pb(II), Cu(II), Ni(II), Zn(II) and Co(II) were 740.7, 97.0, 84.1, 70.8 and 68.2 mg/g, respectively, when pH values were 5.0, 4.0, 5.0, 5.0 and 5.0, respectively. Removal efficiencies of EDAGO for Pb(II), Cu(II) and Zn(II) were 99.2%, 95.8% and 93.9%, respectively; moreover, the adsorbent can be reused and exhibits very high removal efficiencies.     

Preparation of Poly(acrylamide-maleic Acid) Resin by Template Polymerization and Its Use for Adsorption of Co(II) and Ni(II)

Poly(acrylamide-maleic acid) resin P(AAm-MA) was prepared by template polymerization. Polyacrylamide PAAm was used as a template for the polymerization of MA in an aqueous solution using gamma rays as the initiator. The effects on the capacity of P(AAm-MA), such as concentration of maleic acid and amount of template polymer, were investigated. P(AAm-MA) has been utilized as an adsorbent for the removal of Co(II) and Ni(II) ions from an aqueous solution. The effects of time of equilibrium, pH, temperatures, and dosage of the adsorbent on the removal of Co(II) and Ni(II) ions have been studied. The equilibrium data were analyzed using the Langmuir and Freundlich isotherm models. The equilibrium process was described well by the Langmuir isotherm model.     

Synthesis of Amine-Functionalized MCM-41 and MCM-48 for Removal of Heavy Metal Ions from Aqueous Solutions

In this research amino functional mesoporous MCM-41 and MCM-48 materials were prepared in an attempt to develop efficient adsorbents for removal of heavy metals from aqueous solutions. The adsorbents were characterized by XRD, FTIR, and TG-DTG techniques. The synthesized adsorbents were used for the removal of Cu(II), Co(II), Cd(II), and Pb(II) from aqueous solutions for the first time, and the influence of some effective parameters including concentration, initial pH, contact time, and temperature on the sorption process was studied and optimized. Significant adsorption capacities were obtained at low concentrations. The kinetic studies showed that the adsorption process was fast and more than 90% of equilibrium capacity was achieved within 60 min. Experimental kinetic data was well fitted with the pseudo-second-order kinetic model. Thermodynamic parameters computed from the experimental data showed that the adsorption was endothermic and spontaneous.     

Cysteine-metal affinity chromatography: determination of heavy metal adsorption properties

Various adsorbent materials have been reported in the literature for heavy metal removal. We have developed a novel approach to obtain high metal sorption capacity utilising cysteine containing adsorbent. Metal complexing aminoacid-ligand cysteine was immobilised onto poly(hydroxyethylmethacrylate) (PHEMA) microbeads. PHEMA-cysteine affinity microbeads containing 0.318 mmol cysteine/g were used in the removal of heavy metal ions (i.e. copper, lead and cadmium) from aqueous media containing different amounts of these ions (50–400 mg/l for Pb(II) and Cd(II), 25–60 mg/l for Cu(II)) and at different pH values (4.0–7.0). The maximum adsorption capacity of heavy metal ions onto the cysteine-containing microbeads under non-competitive conditions were 0.259 mmol/g for Pb(II), 0.330 mmol/g for Cd(II) and 0.229 mmol/g for Cu(II). The affinity order was observed as follows: Cd(II)>Pb(II)>Cu(II). The competitive adsorption capacities of the heavy metals were 0.260 mmol/g for Cd(II) and 0.120 mmol/g for Cu(II). Pb(II) adsorption onto cysteine-immobilised microbeads was zero under competitive conditions. The affinity order was as follows: Cd(II)>Cu(II)>Pb(II). The formation constants of cysteine–metal ion complexes have been investigated applying the method of Ruzic. The calculated value of stability constants were 1.75×10⁴ l/mol for Pb(II)–cysteine complex and 4.35×10⁴ l/mol for Cd(II)–cysteine complex and 1.39×10⁴ l/mol for Cu(II)–cysteine complex. PHEMA microbeads carrying cysteine can be regenerated by washing with a solution of hydrochloric acid (0.05 M). The maximum desorption ratio was greater than 99%. These PHEMA microbeads are suitable for repeated use for more than three adsorption–desorption cycles without considerable loss in adsorption capacity.     

Removal of Cd(II), Hg(II), and Pb(II) ions from aqueous solution using p(HEMA/chitosan) membranes

An interpenetration network (IPN) was synthesized from 2‐hydroxyethyl methacrylate (HEMA) and chitosan, p(HEMA/chitosan) via UV‐initiated photo‐polymerization. The selectivity to different heavy metal ions viz Cd(II), Pb(II), and Hg(II) to the IPN membrane has been investigated from aqueous solution using bare pHEMA membrane as a control system. Removal efficiency of metal ions from aqueous solution using the IPN membranes increased with increasing chitosan content and initial metal ions concentrations, and the equilibrium time was reached within 60 min. Adsorption of all the tested heavy metal ions on the IPN membranes was found to be pH dependent and maximum adsorption was obtained at pH 5.0. The maximum adsorption capacities of the IPN membrane for Cd(II), Pb(II), and Hg(II) were 0.063, 0.179, and 0.197 mmol/g membrane, respectively. The adsorption of the Cd(II), Hg(II), and Pb(II) metal ions on the bare pHEMA membrane was not significant. When the heavy metal ions were in competition, the amounts of adsorbed metal ions were found to be 0.035 mmol/g for Cd(II), 0.074 mmol/g for Hg(II), and 0.153 mmol/g for Pb(II), the IPN membrane is significantly selective for Pb(II) ions. The stability constants of IPN membrane–metal ions complexes were calculated by the method of Ruzic. The results obtained from the kinetics and isotherm studies showed that the experimental data for the removal of heavy metal ions were well described with the second‐order kinetic equations and the Langmuir isotherm model. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007