首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 109 毫秒
1.
程永安  郑丽华 《中国陶瓷》2008,44(1):70-72,66
陶瓷装饰彩绘的艺术形式、风格,社会功能的从属性,生产方式的工艺性,这三者是有着一定的相互联系,社会功能的从属性决定其生产方式。陶瓷装饰彩绘在形式上的装饰性也不完全是由个人的爱好,而往往是在适应客观对象的要求,克服工艺制作局限的过程中自然产生的。陶瓷装饰彩绘的装饰性,表现在构图、造型、色彩等多个方面。  相似文献   

2.
从垫带生产所用设备的性能、操作和胶料变化对垫带质量的影响进行了阐述.着重介绍了垫带生产所用设备的结构、垫带胶料的生产及经常出现的质量缺陷、造成的原因和防治办法.对垫带的生产具有一定的参考价值.  相似文献   

3.
汤大友 《中国涂料》2008,23(1):58-62
1883年,美国匹兹堡平板玻璃公司(Pittsburgh Plate Glass)在宾夕法尼亚州注册成立,时值美国南北战争结束不久、《彭德尔顿法》刚刚颁布,政治稳定,经济复苏,大大小小的工业公司如雨后春笋般在广袤的美利坚大陆上争相建立——但当时恐怕没有多少人能想到这个毫不起眼专做平板玻璃的小公司能存在多久。时光荏苒,一晃124年过去了,当年的匹兹堡平板玻璃公司早已经超出了玻璃产业的局限性,成长为全球领先的化工企业,生产及经营涂料、化学品、光学产品、特殊材料、玻璃及玻璃纤维。如今,她有个响亮的名字:PPG工业集团。  相似文献   

4.
阳光、环境污染、烟尘和生活压力等会导致皮肤细胞氧化,产生自由基,对肌肤造成干噪、斑点、皱纹、粗糙和松弛等老化伤害.为应对这些对娇嫩肌肤的侵害,人们相继开发出维生素C、维生素E、银杏叶、绿茶以及富含维生素的各种水果,应用于护肤品中.葡萄在被证实具有抗氧化功效之后便成为人们关注的又一个焦点.  相似文献   

5.
卢琪 《玻璃与搪瓷》2004,32(6):60-61
玻璃表面处理是应用物理、化学、机械等方法改变玻璃的表面形态、表面化学组成、表面结构或应力状态,得到要求的物性和功能.发达国家广泛利用表面处理技术开发了新品种、提高了质量、增加了产值.国际上玻璃工业大部分利润来自功能薄膜等二次加工,产值可增加几倍.我国是一个玻璃工业大国,多年来平板玻璃产量占世界第一,日用玻璃也占有重要地位,但产品品种少、质量比较差、设备落后、生产效率低、能源消耗大、污染严重,仍是高投入、重污染、低产出的粗放型生产方式.按照我国科学发展观的要求,将循环经济概念贯彻到发展中,需要进行玻璃产品结构调整、工艺升级换代,生产出科技含量大、附加值高的产品,最有效地利用资源和节约能源,最大限度地减少环境污染,达到生态良性循环,走可持续发展的道路.玻璃表面处理具有低投入、轻污染、高产出的特点,符合循环经济的要求.但我国玻璃表面处理方面与国际先进水平相比仍有一定的差距.除引进的项目外,目前企业规模小、比较分散,大部分仍停留在传统工艺水平上,影响了产品的质量和附加值的提高.近代大规模的玻璃表面处理已不能单凭技艺,需要较高的科学技术水平和进行创新,才能生产一流的产品.为提高科学技术水平,就需要科研和教育,需要培养人才,其中科学技术书籍是必不可少的.  相似文献   

6.
明胶在糖果中的应用示例   总被引:3,自引:0,他引:3  
明胶在食品工业中的应用主要用于生产明胶凝胶糖果。明胶是动物的骨和皮等结缔组织,通过一系列的工艺处理,降解其所含胶原得到的纯蛋白质产品,蛋白质含量不低于85%。它非常容易交织成不易断裂的链和网状结构,能形成强度很大的凝胶,并且是一种可逆性的亲水胶体。在糖果生产中,明  相似文献   

7.
陶瓷中碱金属和碱土金属氧化物对三氧化二铁分解的影响   总被引:1,自引:0,他引:1  
实验研究了陶瓷原料中的碱金属、碱土金属、氧化铝对三氧化二铁分解的起始温度和分解量的影响,并采用TO—DTA和XPd3等方法分析了这些成分与三氧化二铁分解之间的机理。  相似文献   

8.
平板硫化机电加热式热板的瞬态导热过程,由于存在多种影响因素,是一个比较复杂的过程.但在特定的环境中,相邻热管之间的管间距是影响热板温度场分布的主要因素.由于热板温差和管间距之间是高度非线性关系,所以本文利用BP神经网络对热板温差进行模型预测,通过训练和验证两个过程,结果表明BP神经网络不但能较好地拟合已知数据,还具有良好的预测功能,为工程设计提供了参考依据.  相似文献   

9.
TiO2是宽禁带(Eg=3.2ev)半导体材料,只能吸收少于5%的太阳光能,这限制了TiO2的实际应用,而金属离子掺杂、染料光敏化以及复合半导体均存在一定的缺陷.掺氮的TiO2(TiO2-xNx)可以克服这些缺陷并将吸光范围扩展到可见光区,具有令人欣慰的前景.本文就目前对TiO2-xNx光催化剂的制备以及在环境保护中实际应用的研究状况进行综述,并提出未来TiO2-xNx的研究趋势.  相似文献   

10.
木质素/LDPE-EVA复合材料及其发泡材料的制备   总被引:1,自引:0,他引:1       下载免费PDF全文
周建  罗学刚 《化工学报》2007,58(7):1834-1839
研究了天然可降解高分子材料木质素与LDPE-EVA的共混性能及进一步制备发泡材料的力学性能,共混物SEM图表明,在增容剂LDPE-g-MAH的作用下,木质素均匀地分散于LDPE-EVA基体中,并明显形成了一定的过渡层;DSC曲线分析表明,木质素/LDPE-EVA共混物有且只有一个介于两者吸热峰之间的吸热峰,进一步说明了两者具有较好的相容性。综合看来,10份LDPE-g-MAH增容20份含量的木质素与100份55/45的LDPE-EVA配以0.5份交联剂在130℃下混合具有较好的共混性能。同时,采用模塑发泡能得到具有优良力学性能和较好形貌的木质素/LDPE-EVA发泡材料。  相似文献   

11.
2004~2005年国外塑料工业进展   总被引:1,自引:0,他引:1  
收集了2004年7月-2005年6月国外塑料工业的相关资料,介绍了2004年~2005年国外塑料工业的发展情况。提供了世界几大区域塑料的产量、增长率及所占份额;美国、德国、日本、韩国、法国、比利时、印度、西班牙、中国台湾、加拿大、巴西、英国等国家和地区的不同树脂的产量及消费量;各国、各地区塑料原料的产量、进出口量、国内消费量和人均消费量;日本塑料原料的生产情况。按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、通用热固性树脂(酚醛、聚氨酯、不饱和树脂、环氧树脂)、特种工程塑料(聚苯硫醚、液晶聚合物、聚醚醚酮、聚砜)的品种顺序,对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。  相似文献   

12.
沥青质引发的蜡油体系结蜡层分层现象及分层规律   总被引:1,自引:1,他引:0       下载免费PDF全文
李传宪  蔡金洋  程梁  杨飞  张皓若  张莹 《化工学报》2016,67(6):2426-2432
利用自主研发的Couette结蜡装置,对蜡含量相同的油样1(不含沥青质)和油样2[含0.75%(质量分数)沥青质]进行结蜡实验,并研究其结蜡层的分层现象和分层规律。通过对油样1和油样2结蜡表层和底层的宏观形貌、DSC放热、析蜡量、蜡晶微观形貌的分析发现:油样1结蜡层无明显分层现象,而油样2结蜡层分层现象明显,沥青质的加入导致了结蜡层的分层。与结蜡表层相比,油样2结蜡底层的析蜡点、蜡含量与沥青质含量显著升高,蜡晶形貌发展为致密的类球状大蜡晶。油样2结蜡表层沉积量随壁温的升高、油壁温差和转速的增大而减小;结蜡底层沉积量随壁温升高而减小,随油壁温差和转速的增大而增大;总的蜡沉积量随壁温的升高和转速的增大而减小,随油壁温差的增大先增大后减小。  相似文献   

13.
Protein solubility is based on the compatibility of the specific protein surface with the polar aquatic environment. The exposure of polar residues to the protein surface promotes the protein’s solubility in the polar environment. The aquatic environment also influences the folding process by favoring the centralization of hydrophobic residues with the simultaneous exposure to polar residues. The degree of compatibility of the residue distribution, with the model of the concentration of hydrophobic residues in the center of the molecule, with the simultaneous exposure of polar residues is determined by the sequence of amino acids in the chain. The fuzzy oil drop model enables the quantification of the degree of compatibility of the hydrophobicity distribution observed in the protein to a form fully consistent with the Gaussian 3D function, which expresses an idealized distribution that meets the preferences of the polar water environment. The varied degrees of compatibility of the distribution observed with the idealized one allow the prediction of preferences to interactions with molecules of different polarity, including water molecules in particular. This paper analyzes a set of proteins with different levels of hydrophobicity distribution in the context of the solubility of a given protein and the possibility of complex formation.  相似文献   

14.
姚翰林  辛忠 《化工学报》2022,73(8):3518-3528
以碳酸钙水相合成为模型反应,借助对流动反应过程的放大观测,从沉淀悬浮液的流变特性分析了液相沉淀反应在毫米级管式微通道中的流动行为特征以及通道堵塞的过程机理。结果表明,碳酸钙-水悬浮体系的黏度在低剪切速率下随固含率的增加而飙升,而反应通道堵塞的本质可归因于在壁面和流动主体区形成了固含率较高的局部高黏区,使流动性严重恶化。提高反应的流速加快了壁面沉积层和沉淀颗粒团聚体的形成,反而加快了堵塞;其中团聚体的形成远快于沉积层的积累,使团聚体的“架桥”虽晚于沉积层出现,却成为管路堵塞的主要因素。基于破坏流动壁面和主体的局部高黏区,设计了两种新型的微通道反应器模型,有可能为解决反应通道堵塞这一难题提供新的思路。  相似文献   

15.
Processing of concentrated lignocellulosic biomass suspensions typically involves the conversion of the cellulose into sugars and sugars into ethanol. Biomass is usually pretreated via methods like comminution or steam explosion to form fine cellulosic fibers to be dispersed into an aqueous phase for further treatment. The resulting cellulose suspensions need to be pressurized and pumped into and out of various processing vessels without allowing the development of flow instabilities that are typically associated with “demixing”, that is, the segregation of the cellulosic biomass from the aqueous phase via the formation of mats of cellulosic fibers and the filtration of the aqueous phase. Such demixing can prevent continuous processing at high rates. Here, the development of flow instabilities via the demixing effect for cellulose suspensions is demonstrated using capillary and compressive squeeze flows. It is shown that the use of a gelation agent, hydroxypropyl guar gum, at the critical concentration of 0.5 wt% or higher significantly affects the viscoelastic material functions of cellulosic suspensions, improves the dispersive mixing of the fibers within the aqueous phase, and results in the elimination of the flow instabilities and associated demixing effects that are ubiquitously observed during the pressurization and processing of cellulosic suspensions.  相似文献   

16.
ACR对PVC加工性能的影响   总被引:1,自引:0,他引:1  
详细研究了丙烯酸酯类PVC加工助剂———ACR的特性黏度、组成对PVC共混物加工性能的影响。结果表明,随着甲基丙烯酸甲酯用量的下降和丙烯酸丁酯用量的提高,其塑化速度增大,但熔体强度降低,在组成相同的情况下,特性黏度越大,塑化越慢,熔体强度越大;丙烯酸酯类加工助剂对PVC制品的拉伸强度和维卡软化点无明显影响,高黏度的加工助剂有提高PVC制品拉伸强度和维卡软化点的趋势。  相似文献   

17.
One of the fundamental questions discussed in the course of the development towards Industry 4.0 is that of responsibility for machines. The inner-juridical discussion of this issue suffers from the unclear concept of artificial intelligence and the fascination about the creation of very high technical performance while lightning-fast access to a huge amount of information or the determination of previously undiscovered correlations between individual phenomena is no indication of the appearance of the superhuman. Technicians, on the other hand, are confused about the differentiations by which lawyers approach the question of responsibility. This article aims at bridging the gap in order to strengthen the interdisciplinary dialogue.  相似文献   

18.
牟新竹  陈振乾 《化工学报》2020,71(z2):241-252
由于在超声波声场中污泥微粒会发生分层现象,声互作用力使得微粒于超声传播方向相垂直的平面上发生凝聚,因此污泥厚度大小对超声波辅助热风干燥污泥特性有着重要的影响。通过实验的方法,对不同厚度污泥在超声波声场中的分层凝聚现象进行观察,发现污泥内部结构的分层现象随其厚度的增加而明显。研究了超声波对不同厚度污泥干燥过程中各时期干燥时长、干燥速率的影响效果,以及分析了湿分有效扩散系数(Deff)随污泥厚度变化的情况。从实验结果中可以发现,在超声波功率小于135 W范围内,污泥厚度越大,干燥过程中第一降速期时间越长,干燥速率提升效果越差,而对恒速干燥期内干燥速率提升效果更明显;在5、10以及15 mm厚度的污泥中,10 mm厚度的污泥在超声波功率小于90 W的条件下总干燥时长降低幅度最大,干燥速率在各阶段提速也较快;污泥厚度越小,超声波功率对污泥湿分有效扩散系数影响越小,反之影响越大。  相似文献   

19.
Molecular mechanics modelling is used to calculate the energies of interaction, hence the molecular level energy of adhesion at the interface with crystalline cellulose I of three different photopolymerizable primers and of a polyester varnish at the interface with the primer/cellulose assembly. The energy of interactions for just one of the primers with the statistically most common conformation of amorphous cellulose has also been obtained for comparison. Experimental results of adhesion by a standard peel test and by thermomechanical analysis, in which the effect of viscoelastic energy dissipation by crack tip propagation has been respectively minimized or is not present, hence in which the energy of interfacial interaction is nothing else but the work of adhesion, correlated well with the energies of interaction calculated by molecular mechanics. An equation correlating the energy of interaction at each finish/cellulose interface with the deflection derived by thermomechanical analysis, and with the number of internal bond rotational degrees of freedom as well as the degree of networking of the finish, has been derived and is presented. A relationship between the intrinsic fracture energy Go and the molecular mechanics-derived energy of interaction at the interface equating this to the square of the work of adhesion is obtained and is presented.  相似文献   

20.
电解质溶液非理想性行为的解释和预测   总被引:2,自引:0,他引:2       下载免费PDF全文
王仁远  时钧 《化工学报》1997,48(2):143-151
提出一个新的电解质溶液理论,从粒子相互作用的能量效应和溶液微观结构的熵效应两个方面解释电解质溶液的非理想性行为,并建立一个新的电解质溶液原始模型。新模型考虑了溶液微观结构的熵效应,显著提高了对各种电解质溶液的非理想性行为的预测。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号