An investigation of the relationship between the performance of polybenzoxazine and backbone structure of hyperbranched epoxy modifiers

Novel hyperbranched polyether epoxies (HBPEEs) with various backbone structures were synthesized using a one‐pot A₂ + B₃ approach. These highly effective HBPEEs were incorporated into polybenzoxazine (PBOZ) network at various concentrations without cure‐induced phase separation. Effects of backbone structure and loading amount on the curing behavior and mechanical and thermal properties of PBOZ/HBPEE hybrid were investigated. The general trend shows that the impact strength, flexural strength and storage modulus all first increase and then decrease with filler content. For the backbone structure study, HBPEE‐3, which has the highest proportion of benzene rings, can simultaneously improve impact strength, flexural strength and storage modulus. In contrast, HBPEE‐1 and HBPEE‐2, which have fewer benzene rings and smaller intramolecular cavities, perform worse in terms of mechanical and thermal properties. Both backbone structure and loading of HBPEEs play important roles in determining the crosslink density and structures of non‐phase‐separated network. In addition, the simultaneous improvement can be explained by enhanced crosslinking density, structure of modifier, reduced hydrogen bond network and higher fractional free volume according to dynamic mechanical and thermomechanical analyses. © 2017 Society of Chemical Industry     

Decoration of graphene oxide nanosheets with amino silane‐functionalized silica nanoparticles for enhancing thermal and mechanical properties of polypropylene nanocomposites

Graphene oxide nanosheets were decorated by amino‐silane modified silica nanoparticles. An electrostatic interaction between the negative charge of oxygen‐containing groups of graphene oxide and the positive charge of amino‐silane functional groups on the surface of silica nanoparticles plays a major role for the interfacial interaction of these two materials. The hybrid material was then used as a reinforcement in polypropylene (PP) composite. The increasing tensile strength at yield, tensile, and flexural modulus of the PP composite at a graphene oxide‐ amino‐silane silica loading content of 20 wt % are about 24.81, 55.52, and 30.35%, respectively, when compared with those of PP. It is believed that GO assists the dispersion of SiO₂ nanoparticles to the polymer matrix because of its unique structure having hydrophilicity due to its oxygen functional groups and hydrophobicity owing to its backbone graphitic carbon structure. This hybrid material may also be used as the reinforcement in other polyolefins. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44382.     

Fabrication and characterization of novel zirconia filled glass fiber reinforced polyester hybrid composites

Novel hybrid glass fiber reinforced polyester composites (GFRPCs) filled with 1‐5 wt % microsized zirconia (ZrO₂) particles, were fabricated by hand lay‐up process followed by compression molding and evaluated their physical, mechanical and thermal behaviors. The consumption of styrene in cured GFRPCs was confirmed by Fourier transform infrared spectroscopy. The potential implementation of ZrO₂ particles lessened the void contents marginally and substantially enhanced the mechanical and thermal properties in the resultant hybrid composites. The GFRPCs filled with 4 wt % ZrO₂ illustrated noteworthy improvement in tensile strength (66.672 MPa) and flexural strength (67.890 MPa) while with 5 wt % ZrO₂ showed 63.93% rise in hardness, respectively, as compared to unfilled GFRPCs. Physical nature of polyester matrix for composites and an improved glass transition temperature (T_g) from 103 to 112 °C was perceived by differential scanning calorimetry thermograms. Thermogravimetric analysis revealed that the thermal stability of GFRPCs was remarkably augmented with the addition of ZrO₂. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43615.     

Preparation and properties of maleimide‐functionalized hyperbranched polysiloxane and its hybrids based on cyanate ester resin

A new hyperbranched polysiloxane containing maleimide (HPMA) was synthesized through the reaction between N‐(4‐hydroxyphenyl) maleimide and 3‐glycidoxypropyltrimethoxysilane, which was then used to prepare cyanate ester (CE) resin‐based hybrids (coded as HPMAx/CE, where x is the weight fraction of HPMA in the hybrid). The curing behavior of uncured hybrids and the typical properties (impact strength and dielectric properties) of cured hybrids were systemically investigated. Results show that the performance of hybrids is greatly related with the content of HPMA. Hybrids have obviously lower curing temperature than CE, overcoming the poor curing characteristics (higher curing temperature and longer curing time) of neat CE, for example, the curing peak temperature of HPMA20/CE is about 65°C lower than that of CE. In the case of cured resin and hybrids, the hybrids exhibit decreased dielectric constant and loss than CE resin; moreover, the former also exhibits lower water absorption than the latter. Specifically, the dielectric loss of HPMA15/CE hybrid is only about 27% of that of neat CE resin. In addition, the hybrids with suitable contents of HPMA have significantly improved impact strengths. The overall improved properties suggest that HPMAx/CE hybrids have great potential in applications needing harsh requirements of curing feature, dielectric properties, and toughness. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

In situ injectable poly(γ‐glutamic acid) based biohydrogel formed by enzymatic crosslinking

Enzymatic crosslinking was developed to prepare in situ forming poly(γ‐glutamic acid) (γ‐PGA) based hydrogel in this study. First, the precursor of poly(γ‐glutamic acid)–tyramine (γ‐PGA–Ty) was synthesized through the reaction of carboxyl groups from a γ‐PGA backbone with tyramine. The structure of the grafted precursor was confirmed by ¹H‐NMR and Fourier transform infrared spectroscopy. After that, the crosslinking of the phenol‐containing γ‐PGA–Ty precursor was triggered by horseradish peroxidase in the presence of H₂O₂; this resulted in the formation of the γ‐PGA–Ty hydrogels. The equilibrium water content, morphology, enzymatic degradation rate, and mechanical properties of the hydrogels were characterized in detail. The data revealed that the well‐interconnected hydrogels had tunable water contents, mechanical properties, and degradability through adjustments of the composition. Furthermore, cell experiments proved the biocompatibility of the hydrogels by 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide assay. These characteristics provide an opportunity for the in situ formation of injectable biohydrogels as potential candidates in cell encapsulation and drug delivery. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42301.     

An epoxy‐ended hyperbranched polymer as a new modifier for toughening and reinforcing in epoxy resin

A new epoxy‐ended hyperbranched polyether (HBPEE) with aromatic skeletons was synthesized through one‐step proton transfer polymerization. The structure of HBPEE was confirmed by Fourier transform infrared spectroscopy (FTIR), and nuclear magnetic resonance (NMR) measurements. It was proved to be one high efficient modifier in toughening and reinforcing epoxy matrix. In particular, unlike most other hyperbranched modifiers, the glass transition temperature (T_g) was also increased. Compared with the neat DGEBA, the hybrid curing systems showed excellent balanced mechanical properties at 5 wt % HBPEE loading. The great improvements were attributed to the increased cross‐linking density, rigid skeletons, and the molecule‐scale cavities brought by the reactive HBPEE, which were confirmed by dynamical mechanical analysis (DMA) and thermal mechanical analysis (TMA). Furthermore, because of the reactivity of HBPEE, the hybrids inclined to form a homogenous system after the curing. DMA and scanning electron microscopy (SEM) results revealed that no phase separation occurred in the DGEBA/HBPEE hybrids after the introduction of reactive HBPEE. SEM also confirmed that the addition of HBPEE could enhance the toughness of epoxy materials as evident from fibril formation. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1064‐1073, 2013     

Synthesis,characterization, and properties of PCDL aliphatic hyperbranched polyurethane coatings

The isocyanate‐terminated polyurethane pre‐polymer (PPU) was synthesized via the step‐growth polymerization approach by using polycarbonate diol (PCDL, Mn = 2000) and isophorone disocyanate (IPDI) as monomers, dibutyltin dilaurate (DBTDL) as the catalyst. Subsequently, the hyperbranched polyurethane (HBPU) was synthesized by graft copolymerization using PPU, hyperbranched poly(amide–ester) polyol (HPAE) and 1,4‐butanediol (BDO). The molecular structure of HBPU was characterized by means of FTIR, ¹H‐NMR, and ¹³C‐NMR. It was observed that HBPU was synthesized as anticipated. The thermal and mechanical properties, the microstructure, and morphologies of the filmed HBPU and LPU (linear polyurethane) were tested, respectively. The filmed HBPU, revealed better thermal stability, and higher T_g accompanied with lower viscosity than those of filmed LPU. Additionally, the mechanical experiment showed that the filmed HBPU exhibited enhanced mechanical properties because it contained certain amounts of HPAE. Compared with its linear analog (LPU) specimen, the tensile strength of the filmed HBPU containing 10 wt % HPAE increased by 1.9 times (up to 28.15 MPa), and its elongation at break increased by 1.5 times (up to 543.8%), resulting from the dual effects of the hydrogen bonding and the crosslinking density in the HBPU system. The morphologies of filmed HBPU were characterized by means of WAXD and SEM, which indicated that increasing the content of HPAE lowers the crystallinity of HBPU. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2671–2679, 2013     

White‐light‐emitting hybrid film from fluorescent hyperbranched poly(amido amine)

The flexible, strong, and tough white‐light‐emitting (WLE) hybrid films are highly demanded in large‐scale displays, including TV sets, monitors, and electronic interactive devices. In this work, a kind of WLE hybrid film was fabricated from hyperbranched poly(amido amine) (HPAMAM) and nanoclay with the incorporation of riboflavin (VB₂) and rhodamine B (RhB). The fluorescence emission of HPAMAM was partially absorbed and effectively transferred into green and red color, which combined into a bright white light with the residue blue fluorescence. Due to the alignment of nanoclay inside the HPAMAM matrix, in addition to the strong interaction among the HPAMAM molecules and that between HPAMAM and nanoclay, this hybrid film shows to be strong and tough. The mechanical strength is about 20 MPa and the elongation is about 30%. It is convinced that this hybrid film is promising in flexible large‐scale displays. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46015.     

Blended hybrids based on silsesquioxane–OH and epoxy resins

Blended hybrids based on silsesquioxane cyclohexyl trisilanol [STOH; i.e., (c‐C₆H₁₁)₇Si₇O₉(OH)₃] and epoxy resin 4,5‐epoxyhexyl‐1,2‐dimethyl acid diglycidyl ester (TDE‐85) were prepared with good compatibility of STOH up to 5 wt % with TDE‐85. The blended hybrid resins, with various STOH additions, were cured by 4,4′‐diaminodiphenylsulfone, and the curing reactions were investigated with differential scanning calorimetry. The incorporation of STOH increased the curing reaction of TDE‐85 for three active hydrogens existing in the STOH molecule. The storage moduli and glass‐transition temperatures of the cured hybrid resins were studied with dynamic mechanical analysis. The cured hybrids had higher storage moduli than the pure epoxy resins at lower temperatures and increased slightly even when the temperature was above the glass‐transition temperature. Two peaks appearing in tan δ curves indicated the block copolymer structure and two different glass‐transition temperatures of the cured hybrid resins. The thermal stability and flame retardancy of the cured hybrid resins were investigated with thermogravimetric analysis and limited oxygen index values, respectively. The results showed that introducing silsesquioxane–OH units into epoxy resins could improve the thermal stability and flame retardancy of the resins. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Synthesis and properties of novel trifunctional epoxy triglycidyl of 4‐(4‐aminophenoxy)phenol with high toughness

A trifunctional epoxy containing oxyphenylene unit, triglycidyl of 4‐(4‐aminophenoxy)phenol (TGAPP) was synthesized and characterized. The chemical structure of TGAPP was confirmed with FTIR and ¹H‐NMR. DSC analysis revealed that the reactivity of TGAPP with curing agent 4, 4′‐diaminodiphenylsulfone (DDS) was significantly lower than that of triglycidyl para‐aminophenol (TGPAP). Rheological analysis showed that the processing window of TGAPP/DDS was 20°C wider compared with that of TGPAP/DDS. The thermal and mechanical properties of cured TGAPP/DDS were investigated and compared with those of the cured TGPAP/DDS. Experimental results showed that, due to the introduction of oxyphenylene unit, the heat resistance and flexural strength were slightly reduced, while the tensile strength and impact strength were enhanced. SEM also confirmed that the introduction of oxyphenylene unit could enhance the toughness of the TGAPP/DDS as evident from ridge formation. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41878.     

Tetrafunctional epoxy as an all‐purpose modifier for homopolymerized bisphenol A diglycidyl ether

In some applications, homopolymerized epoxies, which offer better biocompatibility and lower water absorption than amine‐ and anhydride‐cured epoxy, are more preferable; however, using homopolymerized epoxy as matrix in composites still remains a challenge. Herein, homopolymerized bisphenol A diglycidyl ether curing systems with simultaneously improved tensile strength, impact strength, and glass transition temperature (T_g) were achieved by addition of small amounts of tetra‐functional epoxies (TFTEs) with different spacer lengths. Effects of spacer length in TFTE on thermal and mechanical properties were investigated. Results indicated that TFTE with the longest spacer length shows the best mechanical performance. In addition, effects of TFTE loading on thermal and mechanical properties were discussed. Compared with neat bisphenol A diglycidyl ether, addition of 5% tetraglycidyl‐1,10‐bis(triphenylmethane) decane leads to simultaneous improvements in tensile strength, impact strength, and T_g. Effects of thermal cycling on the mechanical properties were also reported. Results suggest that the modified homopolymerized epoxy shows good performances and could be used as matrix materials and possibly in some dental applications. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46431.     

Investigation of the mechanical properties of a photocatalytic pseudo‐paint

Photocatalytic oxidative paints (e.g., a paint containing nano‐TiO₂) are used to break down volatile organic compounds to CO₂ by photooxidation reactions. In this research, a photocatalytic oxidative pseudo‐paint was made with acrylic–styrene copolymer latex, TiO₂ pigment, calcium carbonate extender, and TiO₂ nanoparticles as a photocatalyst. To investigate the effects of the pigment, extender, and nanoparticles on the mechanical properties of the samples and their relationship to their photocatalytic activity, different contents of the particles were dispersed in the paint formulation. The tensile strengths (TSs) of the samples were measured as the mechanical properties. The samples were characterized by scanning electron microscopy analysis. We found that up to 3% nano‐TiO₂ enhanced the mechanical properties of the pigmented resin, whereas beyond this, TS decreased. In samples containing 3% nanoparticles, the incorporation of 15% TiO₂ pigment caused optimized mechanical properties, and beyond that, TS decreased because of particle agglomeration. In the absence of nanoparticles, the samples showed improvements in the mechanical properties with up to a 40% loading of pigment. The results reveal that the samples containing nano‐TiO₂ and pigment showed the same trend for the mechanical and photocatalytic properties before the critical pigment volume concentration (CPVC). However, when the extender was incorporated or TiO₂ particles were loaded beyond CPVC, the mechanical and photocatalytic properties correlation was compromised, and they were not directly correlated. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42885.     

Mechanical properties and fracture behaviors of epoxy composites with phase‐separation formed liquid rubber and preformed powdered rubber nanoparticles: A comparative study

Epoxy composites filled with phase‐separation formed submicron liquid rubber (LR) and preformed nanoscale powdered rubber (PR) particles were prepared at different filler loading levels. The effect of filler loading and type on the rheological properties of liquid epoxy resin suspensions and the thermal and mechanical properties of the cured composites as well as the relative fracture behaviors are systematically investigated. Almost unchanged tensile yield strength of the cured epoxy/PR composites is observed in the tensile test compared with that of the neat epoxy; while the strength of the cured epoxy/LR composites shows a maximum value at ∼4.5 wt% and significantly decreases with increasing LR content. The glass transition temperature (T_g) of the cured PR/epoxy has shifted to the higher temperature in the dynamic mechanical thermal analysis compared with that of the cured pure epoxy and epoxy/LR composites. Furthermore, the presence of LR results in highly improved critical stress intensity factor (K_IC) of epoxy resin compared with the corresponding PR nanoparticles. In particular, the PR and LR particles at 9.2 wt% loading produce about 69 and 118% improvement in K_IC of the epoxy composites, respectively. The fracture surface and damage zone analysis demonstrate that these two types of rubber particles induce different degrees of local plastic deformation of matrix initiated by their debonding/cavitation, which was also quantified and correlated with the fracture toughness of the two epoxy/rubber systems. POLYM. COMPOS., 36:785–799, 2015. © 2014 Society of Plastics Engineers     

Preparation and properties of in‐situ polymerized polyurethane/stearate intercalated layer double hydroxide nanocomposites

The present work deals with the effect of stearate intercalated layered double hydroxide (St‐LDH) loadings on the morphological, mechanical, thermal, adhesive and flame retardant properties of polyurethane (PU)/St‐LDH nanocomposites prepared by the in situ polymerization method. X‐ray diffraction and transmission electron microscopy studies confirmed that exfoliation takes place at 3 wt% loading followed by intercalation at higher filler loadings in the PU matrix. The exfoliated structure has been further verified by atomic force microscopy. The measurements of stress‐strain, thermogravimetric analysis, dynamic mechanical analysis, lap shear strength and peel strength analysis showed that the nanocomposites containing 3 wt% St‐LDH exhibit excellent improvement in tensile strength (ca 175%) and log storage modulus (ca 14%), while PU/St‐LDH (5 wt%) possesses optimum improvement in glass transition temperature (ca 6 °C), lap shear strength (200%) and peel strength (130%) over neat PU. In addition, the gradual improvements in limiting oxygen index value with St‐LDH loading indicated the higher effectiveness in providing better barrier properties as well as better flame retardant behavior. Copyright © 2012 Society of Chemical Industry     

Preparation and characterization of polyurethane–organoclay nanocomposites

Nanocomposite polyurethane (PU)–organoclay materials have been synthesized via in‐situ polymerization. The organoclay is first prepared by intercalation of tyramine into montmorillonite (MMT)‐clay through ion exchange process. The syntheses of polyurethane–organoclay hybrid films containing different ratios of clay were carried out by swelling the organoclay into diol and diamine followed by addition of diisocyanate and then cured. The nanocomposites with dispersed and exfoliated structure of MMT were obtained as evidenced by X‐ray diffraction and scanning electron microscope. X‐ray diffraction showed that there is no peak corresponding to d₀₀₁ spacing in organoclay with the ratios up to 20 wt%. SEM images confirmed the dispersion of nanometer silicate layers in the polyurethane matrix. Also, it was found that the presence of organoclay leads to improvement in the mechanical properties. The tensile strength was increased with increasing the organoclay contents to 20 wt% by 221% in comparision to the PU with 0% organoclay. POLYM. COMPOS. 28:108–115, 2007. © 2007 Society of Plastics Engineers     

An investigation of epoxy/thermoplastic blends based on addition of a novel copoly(aryl ether nitrile) containing phthalazinone and biphenyl moieties

In this paper, a novel soluble copoly(aryl ether nitrile) containing phthalazinone and biphenyl moieties (PPBEN) was synthesized for the first time to improve the impact resistance of tetraglycidyl 4,4'‐diaminodiphenylmethane epoxy resin cured with 4,4‐diaminodiphenylsulfone. Then a series of blends were prepared via solution blending with different contents of PPBEN. The thermal and mechanical properties and the micromorphology of the cured blends were investigated by differential scanning calorimetry, dynamic mechanical analysis (DMA), parallel plate rheometry, mechanical property tests and SEM analysis, respectively. The results indicated that the incorporation of thermoplastic PPBEN delayed the epoxy curing reaction, and the crosslinking density of epoxies was also reduced. The no‐notch impact strength of the cured blend with 15% PPBEN was up to 16.7 kJ m^?2, higher by about 104% than that of pure epoxy resin without sacrificing the modulus due to a specific sea‐island structure. All the blends showed two‐phase morphology characterized by DMA and SEM. The size of the thermoplastic morphology was only 70?80 nm, much less than that of commonly used thermoplastics, due to the special segment structure of PPBEN. © 2015 Society of Chemical Industry     

Polyurethane/amino‐grafted multiwalled carbon nanotube nanocomposites: Microstructure,thermal, mechanical,and rheological properties

A mixture of two different polyols, (polytetramethylene ether glycol and polydimethylsiloxane), were employed to synthesize a new structure of polyurethane (PU) with methylene diphenyl diisocyanate (MDI) and 1,4‐butanediol as chain extender. PU nanocomposites containing variable amount (0.3, 0.5, 1, and 3 wt %) of amino‐grafted multiwalled carbon nanotubes (NH₂‐MWNT) were prepared via in situ polymerization. The dispersion of NH₂‐MWNT into polymer matrix was investigated by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Fourier transform infrared spectroscopy (FT‐IR) confirmed the urethane‐urea chemical bonding between the PU chains and the NH₂‐MWNT. Thermal stabilities of the nanocomposites were examined with thermogravimetric analysis (TGA) and the results indicated a remarkable improvement with increasing NH₂‐MWNT contents. The results of dynamic mechanical thermal analysis (DMTA) including storage modulus (E′) and glass transition temperature (T_g), as well as tensile properties demonstrated that the yield strength, strain‐at‐break, and young modulus were enhanced by increasing NH₂‐MWNT content. Rheological behavior including complex viscosity and storage and loss moduli of the PU nanocomposites improved with increasing NH₂‐MWNT loading, as well. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44411.     

Inorganic–organic hybrid materials prepared from zirconium oxo‐clusters and 2‐hydroxyethyl methacrylate

This article describes the preparation and characterization of hybrid materials obtained from the polymerization of vinyl‐substituted zirconium oxo‐clusters [Zr₆O₄(OH)₄(OOCCH₂CHCH₂)₁₂(n‐PrOH)]₂·4(CH₂CHCH₂COOH) (Zr12) and 2‐hydroxyethyl methacrylate (HEMA). The zirconium oxo‐clusters serve as cross‐linking agents, forming a 3D network by means of the copolymerization of their vinylic ligands with HEMA. To optimize the conditions for cross‐linking, the polymerization was monitored with a differential scanning calorimeter. The resulting hybrid materials were also characterized using thermo‐mechanical techniques. There was evidence not only of a greater rigidity above T_g, but also of a better thermal stability for several hybrid formulations than for simple poly‐2‐hydroxyethyl methacrylate. After immersion in water, the hybrids containing 20 or 60% w/w zirconium oxo‐clusters also showed a stable behavior with an equilibrium swelling at about 27 and 18% w/w of water, respectively. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41568.     

Improving the heat‐resistance and toughness performance of phenolic resins by adding a rigid aromatic hyperbranched polyester

An aromatic hyperbranched polyester (AHBP) was synthesized by melt polycondensation from diphenolic acid and characterized by Fourier transform infrared spectrum (FTIR) spectra. The degree of branching (DB) value of AHBP calculated from the ¹³C‐NMR spectroscopy was 0.67. The number‐average molecular weight (M_n) and weight‐average molecular weight (M_w) of AHBP were 1792 and 4480 g/mol, respectively. Novel phenolic resins modified with AHBP (PR/AHBP) were then prepared, in which AHBP was used as toughener of phenolic resins. The effect of AHBP on the thermal properties of phenolic resins was studied by means of differential scanning calorimetry (DSC), thermal gravimetric analyses (TGA), and heat deformation temperature tests. The modified resins presented higher glass transition temperature (T_g) than the unmodified system due to that the rigid backbone structure of AHBP with a great deal of the benzene ring groups restricted the mobility of the chain segments of macromolecules. The DSC, scanning electron microscopy (SEM) analyses showed that AHBP had good compatibility with phenolic resin, and the modified resins showed ductile fracture. The results of mechanical performance measurements exhibited that the impact strength of PR/AHBP containing 15 wt % AHBP was about 130% higher than that of the neat phenolic resin, suggesting that the toughness of PR/AHBP was significantly improved by the addition of AHBP. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42734.     

Microwave processing of SiC nanoparticles infused polymer composites: Comparison of thermal and mechanical properties

The goal of this study is to compare thermal and mechanical properties of an epoxy resin system reinforced with SiC nanoparticles using both conventional thermal curing and microwave irradiation techniques. The microwave curing technique has shown potential benefits in processing polymeric nanocomposites by reducing the curing time without compromising the thermo‐mechanical performances of the materials. It was observed from this investigation that, the curing time was drastically reduced to ～30 min for microwave curing instead of 12 h room temperature curing with additional 6 h post curing at 75°C. Ductile behavior was more pronounced for microwave curing technique while thermal curing showed brittle like behavior as revealed from flexural test. The maximum strain to failure was increased by 25–40% for microwave‐cured nanocomposites over the room temperature cured nanocomposites for the same loading of nanofillers. The glass transition temperature (T_g) also increased by ～14°C while curing under microwave irradiation. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41708.