Mutations Q93H and E97K in TPM2 Disrupt Ca-Dependent Regulation of Actin Filaments

Tropomyosin is a two-chain coiled coil protein, which together with the troponin complex controls interactions of actin with myosin in a Ca²⁺-dependent manner. In fast skeletal muscle, the contractile actin filaments are regulated by tropomyosin isoforms Tpm1.1 and Tpm2.2, which form homo- and heterodimers. Mutations in the TPM2 gene encoding isoform Tpm2.2 are linked to distal arthrogryposis and congenital myopathy—skeletal muscle diseases characterized by hyper- and hypocontractile phenotypes, respectively. In this work, in vitro functional assays were used to elucidate the molecular mechanisms of mutations Q93H and E97K in TPM2. Both mutations tended to decrease actin affinity of homo-and heterodimers in the absence and presence of troponin and Ca²⁺, although the effect of Q93H was stronger. Changes in susceptibility of tropomyosin to trypsin digestion suggested that the mutations diversified dynamics of tropomyosin homo- and heterodimers on the filament. The presence of Q93H in homo- and heterodimers strongly decreased activation of the actomyosin ATPase and reduced sensitivity of the thin filament to [Ca²⁺]. In contrast, the presence of E97K caused hyperactivation of the ATPase and increased sensitivity to [Ca²⁺]. In conclusion, the hypo- and hypercontractile phenotypes associated with mutations Q93H and E97K in Tpm2.2 are caused by defects in Ca²⁺-dependent regulation of actin–myosin interactions.     

Molecular Mechanisms of the Deregulation of Muscle Contraction Induced by the R90P Mutation in Tpm3.12 and the Weakening of This Effect by BDM and W7

Point mutations in the genes encoding the skeletal muscle isoforms of tropomyosin can cause a range of muscle diseases. The amino acid substitution of Arg for Pro residue in the 90th position (R90P) in γ-tropomyosin (Tpm3.12) is associated with congenital fiber type disproportion and muscle weakness. The molecular mechanisms underlying muscle dysfunction in this disease remain unclear. Here, we observed that this mutation causes an abnormally high Ca²⁺-sensitivity of myofilaments in vitro and in muscle fibers. To determine the critical conformational changes that myosin, actin, and tropomyosin undergo during the ATPase cycle and the alterations in these changes caused by R90P replacement in Tpm3.12, we used polarized fluorimetry. It was shown that the R90P mutation inhibits the ability of tropomyosin to shift towards the outer domains of actin, which is accompanied by the almost complete depression of troponin’s ability to switch actin monomers off and to reduce the amount of the myosin heads weakly bound to F-actin at a low Ca²⁺. These changes in the behavior of tropomyosin and the troponin–tropomyosin complex, as well as in the balance of strongly and weakly bound myosin heads in the ATPase cycle may underlie the occurrence of both abnormally high Ca²⁺-sensitivity and muscle weakness. BDM, an inhibitor of myosin ATPase activity, and W7, a troponin C antagonist, restore the ability of tropomyosin for Ca²⁺-dependent movement and the ability of the troponin–tropomyosin complex to switch actin monomers off, demonstrating a weakening of the damaging effect of the R90P mutation on muscle contractility.     

Overexpression of Tropomyosin Isoform Tpm3.1 Does Not Alter Synaptic Function in Hippocampal Neurons

Tropomyosin (Tpm) has been regarded as the master regulator of actin dynamics. Tpms regulate the binding of the various proteins involved in restructuring actin. The actin cytoskeleton is the predominant cytoskeletal structure in dendritic spines. Its regulation is critical for spine formation and long-term activity-dependent changes in synaptic strength. The Tpm isoform Tpm3.1 is enriched in dendritic spines, but its role in regulating the synapse structure and function is not known. To determine the role of Tpm3.1, we studied the synapse structure and function of cultured hippocampal neurons from transgenic mice overexpressing Tpm3.1. We recorded hippocampal field excitatory postsynaptic potentials (fEPSPs) from brain slices to examine if Tpm3.1 overexpression alters long-term synaptic plasticity. Tpm3.1-overexpressing cultured neurons did not show a significantly altered dendritic spine morphology or synaptic activity. Similarly, we did not observe altered synaptic transmission or plasticity in brain slices. Furthermore, expression of Tpm3.1 at the postsynaptic compartment does not increase the local F-actin levels. The results suggest that although Tpm3.1 localises to dendritic spines in cultured hippocampal neurons, it does not have any apparent impact on dendritic spine morphology or function. This is contrary to the functional role of Tpm3.1 previously observed at the tip of growing neurites, where it increases the F-actin levels and impacts growth cone dynamics.     

Natural Mutations Affect Structure and Function of gC1q Domain of Otolin-1

Otolin-1 is a scaffold protein of otoliths and otoconia, calcium carbonate biominerals from the inner ear. It contains a gC1q domain responsible for trimerization and binding of Ca²⁺. Knowledge of a structure–function relationship of gC1q domain of otolin-1 is crucial for understanding the biology of balance sensing. Here, we show how natural variants alter the structure of gC1q otolin-1 and how Ca²⁺ are able to revert some effects of the mutations. We discovered that natural substitutions: R339S, R342W and R402P negatively affect the stability of apo-gC1q otolin-1, and that Q426R has a stabilizing effect. In the presence of Ca²⁺, R342W and Q426R were stabilized at higher Ca²⁺ concentrations than the wild-type form, and R402P was completely insensitive to Ca²⁺. The mutations affected the self-association of gC1q otolin-1 by inducing detrimental aggregation (R342W) or disabling the trimerization (R402P) of the protein. Our results indicate that the natural variants of gC1q otolin-1 may have a potential to cause pathological changes in otoconia and otoconial membrane, which could affect sensing of balance and increase the probability of occurrence of benign paroxysmal positional vertigo (BPPV).     

Effects of Al:Si and (Al + Na):Si ratios on the properties of the international simple glass,part II: Structure

High-alumina containing high-level waste (HLW) will be vitrified at the Waste Treatment Plant at the Hanford Site. The resulting glasses, high in alumina, will have distinct composition-structure-property (C-S-P) relationships compared to previously studied HLW glasses. These C-S-P relationships determine the processability and product durability of glasses and therefore must be understood. The main purpose of this study is to understand the detailed structural changes caused by Al:Si and (Al + Na):Si substitutions in a simplified nuclear waste model glass (ISG, international simple glass) by combining experimental structural characterizations and molecular dynamics (MD) simulations. The structures of these two series of glasses were characterized by neutron total scattering and ²⁷Al, ²³Na, ²⁹Si, and ¹¹B solid-state nuclear magnetic resonance (NMR) spectroscopy. Additionally, MD simulations were used to generate atomistic structural models of the borosilicate glasses and simulation results were validated by the experimental structural data. Short-range (eg, bond distance, coordination number, etc) and medium-range (eg, oxygen speciation, network connectivity, polyhedral linkages) structural features of the borosilicate glasses were systematically investigated as a function of the degree of substitution. The results show that bond distance and coordination number of the cation-oxygen pairs are relatively insensitive to Al:Si and (Al + Na):Si substitutions with the exception of the B-O pair. Additionally, the Al:Si substitution results in an increase in tri-bridging oxygen species, whereas (Al + Na):Si substitution creates nonbridging oxygen species. Charge compensator preferences were found for Si-[NBO] (Na⁺), ^[3]B-[NBO] (Na⁺), ^[4]B (mostly Ca²⁺), ^[4]Al (nearly equally split Na⁺ and Ca²⁺), and ^[6]Zr (mostly Ca²⁺). The network former-BO-network former linkages preferences were also tabulated; Si-O-Al and Al-O-Al were preferred at the expense of lower Si-O-^[3]B and ^[3]B-O-^[3]B linkages. These results provide insights on the structural origins of property changes such as glass-transition temperature caused by the substitutions, providing a basis for future improvements of theoretical and computer simulation models.     

The Orai Pore Opening Mechanism

Cell survival and normal cell function require a highly coordinated and precise regulation of basal cytosolic Ca²⁺ concentrations. The primary source of Ca²⁺ entry into the cell is mediated by the Ca²⁺ release-activated Ca²⁺ (CRAC) channel. Its action is stimulated in response to internal Ca²⁺ store depletion. The fundamental constituents of CRAC channels are the Ca²⁺ sensor, stromal interaction molecule 1 (STIM1) anchored in the endoplasmic reticulum, and a highly Ca²⁺-selective pore-forming subunit Orai1 in the plasma membrane. The precise nature of the Orai1 pore opening is currently a topic of intensive research. This review describes how Orai1 gating checkpoints in the middle and cytosolic extended transmembrane regions act together in a concerted manner to ensure an opening-permissive Orai1 channel conformation. In this context, we highlight the effects of the currently known multitude of Orai1 mutations, which led to the identification of a series of gating checkpoints and the determination of their role in diverse steps of the Orai1 activation cascade. The synergistic action of these gating checkpoints maintains an intact pore geometry, settles STIM1 coupling, and governs pore opening. We describe the current knowledge on Orai1 channel gating mechanisms and summarize still open questions of the STIM1–Orai1 machinery.     

Effects of mutations in the calcium-binding sites of recoverin on its calcium affinity: evidence for successive filling of the calcium binding sites

A molecule of the photoreceptor Ca²⁺-binding protein recoverincontains four potential EF-hand Ca²⁺-binding sites, of whichonly two, the second and the third, are capable of binding calciumions. We have studied the effects of substitutions in the second,third and fourth EF-hand sites of recoverin on its Ca²⁺-bindingproperties and some other characteristics, using intrinsic fluorescence,circular dichroism spectroscopy and differential scanning microcalorimetry.The interaction of the two operating binding sites of wild-typerecoverin with calcium increases the protein's thermal stability,but makes the environment around the tryptophan residues moreflexible. The amino acid substitution in the EF-hand 3 (E121Q)totally abolishes the high calcium affinity of recoverin, whilethe mutation in the EF-hand 2 (E85Q) causes only a moderatedecrease in calcium binding. Based on this evidence, we suggestthat the binding of calcium ions to recoverin is a sequentialprocess with the EF-hand 3 being filled first. Estimation ofCa²⁺-binding constants according to the sequential binding schemegave the values 3.7 x 10⁶ and 3.1 x 10⁵ M^–1 for thirdand second EF-hands, respectively. The substitutions in theEF-hand 2 or 3 (or in both the sites simultaneously) do notdisturb significantly either tertiary or secondary structureof the apo-protein. Amino acid substitutions, which have beendesigned to restore the calcium affinity of the EF-hand 4 (G160D,K161E, K162N, D165G and K166Q), increase the calcium capacityand affinity of recoverin but also perturb the protein structureand decrease the thermostability of its apo-form.     

Miscibility of chitosan/poly(ethylene oxide) blends and effect of doping alkali and alkali earth metal ions on chitosan/PEO interaction

The miscibility of Chitosan (CS) and poly(ethylene oxide) (PEO) in their blends and the effect of K⁺ and Ca²⁺ doping on the CS/PEO interaction have been investigated in this work. CS and PEO appeared to be miscible and the DSC analysis suggested the Flory-Huggins interaction parameter χ_AB to be −0.21. Doping of K⁺ and Ca²⁺ into the CS/PEO blend matrix enhanced the cooperative interaction between CS and PEO and this enhancement was larger for Ca²⁺ than for K⁺. The difference between Ca²⁺ and K⁺ possibly reflects a stronger multi-valence interaction of Ca²⁺ with the amino and hydroxyl groups of CS as well as the ether groups of PEO to form a stable CS/Ca²⁺/PEO complex and a less significant interaction of K⁺, as suggested by DSC, WAXD and FTIR results. MD simulations clearly indicated the correlation between the dynamic behavior and the interaction of K⁺ and Ca²⁺ in the CS/PEO blend matrix.     

Molecular dynamics simulation studies on Ca2+ -induced conformational changes of annexin I

Cryo-electron microscopy (EM) and X-ray studies proposed differentmechanisms for annexin-induced membrane aggregation. In thiswork, molecular dynamics (MD) simulation technique was utilizedto gain an insight into the calcium-induced conformational changeson annexin I and their implication in membrane aggregation mechanism.MD simulations were performed on the Ca²⁺-free annexin I withthe N-terminal domain buried inside the core (System 1), theCa²⁺-bound annexin I without N-terminal domain (System 2) andthe Ca²⁺-bound annexin I with the N-terminal domain exposed(System 3). Our results indicated that calcium binding increasesthe flexibility of annexin I core domain residues includingthe calcium coordinating residues. As a result, annexin I wasactivated to interact with the negatively charged membrane.The exposed N-terminal domain was very flexible and graduallylost the secondary structure during MD simulation, suggestingthat the N-terminal may adopt a favorable conformation to binda second membrane and also explaining the failure of attemptsto crystallize the full-length annexin I in the presence ofcalcium ions. The measured dimensions of the averaged simulationstructure of the Ca²⁺-bound annexin I with the N-terminal exposed(System 3) support the proposed membrane aggregation mechanismbased on X-ray studies.     

A Novel GUCA1A Variant Associated with Cone Dystrophy Alters cGMP Signaling in Photoreceptors by Strongly Interacting with and Hyperactivating Retinal Guanylate Cyclase

Guanylate cyclase-activating protein 1 (GCAP1), encoded by the GUCA1A gene, is a neuronal calcium sensor protein involved in shaping the photoresponse kinetics in cones and rods. GCAP1 accelerates or slows the cGMP synthesis operated by retinal guanylate cyclase (GC) based on the light-dependent levels of intracellular Ca²⁺, thereby ensuring a timely regulation of the phototransduction cascade. We found a novel variant of GUCA1A in a patient affected by autosomal dominant cone dystrophy (adCOD), leading to the Asn104His (N104H) amino acid substitution at the protein level. While biochemical analysis of the recombinant protein showed impaired Ca²⁺ sensitivity of the variant, structural properties investigated by circular dichroism and limited proteolysis excluded major structural rearrangements induced by the mutation. Analytical gel filtration profiles and dynamic light scattering were compatible with a dimeric protein both in the presence of Mg²⁺ alone and Mg²⁺ and Ca²⁺. Enzymatic assays showed that N104H-GCAP1 strongly interacts with the GC, with an affinity that doubles that of the WT. The doubled IC₅₀ value of the novel variant (520 nM for N104H vs. 260 nM for the WT) is compatible with a constitutive activity of GC at physiological levels of Ca²⁺. The structural region at the interface with the GC may acquire enhanced flexibility under high Ca²⁺ conditions, as suggested by 2 μs molecular dynamics simulations. The altered interaction with GC would cause hyper-activity of the enzyme at both low and high Ca²⁺ levels, which would ultimately lead to toxic accumulation of cGMP and Ca²⁺ in the photoreceptor outer segment, thus triggering cell death.     

Multilevel Changes in Protein Dynamics upon Complex Formation of the Calcium‐Loaded S100A4 with a Nonmuscle Myosin IIA Tail Fragment

Dysregulation of Ca²⁺‐binding S100 proteins plays important role in various diseases. The asymmetric complex of Ca²⁺‐bound S100A4 with nonmuscle myosin IIA has high stability and highly increased Ca²⁺ affinity. Here we investigated the possible causes of this allosteric effect by NMR spectroscopy. Chemical shift‐based secondary‐structure analysis did not show substantial changes for the complex. Backbone dynamics revealed slow‐timescale local motions in the H1 helices of homodimeric S100A4; these were less pronounced in the complex form and might be accompanied by an increase in dimer stability. Different mobilities in the Ca²⁺‐coordinating EF‐hand sites indicate that they communicate by an allosteric mechanism operating through changes in protein dynamics; this must be responsible for the elevated Ca²⁺ affinity. These multilevel changes in protein dynamics as conformational adaptation allow S100A4 fine‐tuning of its protein–protein interactions inside the cell during Ca²⁺ signaling.     

Strontium ion substituted alginate-based hydrogel fibers and its coordination binding model

Sr-alginate and Ca-alginate hydrogel fibers were fabricated via microfluidic spinning technology, and various analytical methods were adopted to characterize fibers and disclose the coordination model of Sr²⁺ binding with alginate molecule chain. For both fibers, the more crosslinking sites of Sr²⁺ with alginate molecule were illustrated in comparison with that of Ca²⁺. The more robust mechanical performance of Sr-alginate fibers than Ca-alginate counterpart was a strong indication of the more strong binding of Sr²⁺ with alginate molecular chain. FTIR and electric conductivity disclosed the chelation type of Sr²⁺ with alginate macromolecule being similar to that of Ca²⁺, which was core-shell of the analogous “egg-box” structure. Circular dichroism spectroscopy further certified the extra coordination sites for Sr²⁺ with alginate molecule than Ca²⁺. Research on the coordination model will be more beneficial to optimizing the physicochemical properties of alginate fibers. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48571.     

Binding of calcium and magnesium by modified onion skins

The use of modified onion skins for binding of Ca²⁺ and Mg²⁺ from solutions has been investigated. The effect of time of equilibration, temperature, and pH on the sorption of the metal ions have been studied. Batch and column experiments have been performed and the adsorption isotherms have been plotted. The capacities with respect to Ca²⁺ and Mg²⁺ were found to be 4 and 16 meq, respectively, per gram of the substrate when separate column experiments were conducted using 1 L of solution containing 1000 meq of the respective metal ions at pH6. With a solution containing 10 meq each of Ca²⁺ and Mg²⁺ together, however, the substrate seems to exhibit greater preference for Ca²⁺ than Mg²⁺. The sorbed metal ions from the substrate can be leached into solution with a decinormal solution of HCl and the washed bed can be reused. In view of the complex organic nature of the onion skin and its considerable capacity to bind Ca²⁺ and Mg²⁺, the possibility of its use for preventing scale formation in boilers is indicated.     

Preparation of environmentally friendly high-emissivity Ca2+-Fe3+ co-doped LaAlO3 ceramic

Ca²⁺-Cr³⁺ co-doped LaAlO₃ is an excellent ceramic material with high emissivity; however, it is harmful to the environment because of the presence of Cr³⁺ ions. In this study, Ca²⁺-Fe³⁺ co-doped LaAlO₃ ceramic materials were successfully prepared via a high-temperature solid-state reaction. The emissivity of Ca²⁺-Fe³⁺ co-doped LaAlO₃ was 0.91, which is approximately equal to that of Ca²⁺-Cr³⁺ co-doped LaAlO₃. To compensate for the lack of data on the thermophysical properties of doped LaAlO₃ high-emissivity ceramics, the thermal expansion coefficients and thermal conductivities of LaAlO₃ doped with Ca²⁺-Fe³⁺ or Ca²⁺-Cr³⁺ were investigated. The thermal conductivities of La_0.9Ca_0.1Al_0.9Fe_0.1O₃ and La_0.9Ca_0.1Al_0.9Cr_0.1O₃ at 1200°C were 3.802 and 3.707 W·m⁻¹·K⁻¹, respectively. The thermal expansion coefficients of La_0.9Ca_0.1Al_0.9Fe_0.1O₃ and La_0.9Ca_0.1Al_0.9Cr_0.1O₃ at 1200°C were 11.49×10⁻⁶ and 11.41×10⁻⁶ K⁻¹, respectively. These results indicate that Ca²⁺-Fe³⁺ co-doped LaAlO₃ exhibits great potential as a new generation of environmentally friendly near-infrared radiating materials in the field of energy efficiency.     

Enhancement of Palmarumycins C12 and C13 Production in Liquid Culture of Endophytic Fungus Berkleasmium sp. Dzf12 after Treatments with Metal Ions

The influences of eight metal ions (i.e., Na⁺, Ca²⁺, Ag⁺, Co²⁺, Cu²⁺, Al³⁺, Zn²⁺, and Mn⁴⁺) on mycelia growth and palmarumycins C₁₂ and C₁₃ production in liquid culture of the endophytic fungus Berkleasmium sp. Dzf12 were investigated. Three metal ions, Ca²⁺, Cu²⁺ and Al³⁺ were exhibited as the most effective to enhance mycelia growth and palmarumycin production. When calcium ion (Ca²⁺) was applied to the medium at 10.0 mmol/L on day 3, copper ion (Cu²⁺) to the medium at 1.0 mmol/L on day 3, aluminum ion (Al³⁺) to the medium at 2.0 mmol/L on day 6, the maximal yields of palmarumycins C₁₂ plus C₁₃ were obtained as 137.57 mg/L, 146.28 mg/L and 156.77 mg/L, which were 3.94-fold, 4.19-fold and 4.49-fold in comparison with that (34.91 mg/L) of the control, respectively. Al³⁺ favored palmarumycin C₁₂ production when its concentration was higher than 4 mmol/L. Ca²⁺ had an improving effect on mycelia growth of Berkleasmium sp. Dzf12. The combination effects of Ca²⁺, Cu²⁺ and Al³⁺ on palmarumycin C₁₃ production were further studied by employing a statistical method based on the central composite design (CCD) and response surface methodology (RSM). By solving the quadratic regression equation between palmarumycin C₁₃ and three metal ions, the optimal concentrations of Ca²⁺, Cu²⁺ and Al³⁺ in medium for palmarumycin C₁₃ production were determined as 7.58, 1.36 and 2.05 mmol/L, respectively. Under the optimum conditions, the predicted maximum palmarumycin C₁₃ yield reached 208.49 mg/L. By optimizing the combination of Ca²⁺, Cu²⁺ and Al³⁺ in medium, palmarumycin C₁₃ yield was increased to 203.85 mg/L, which was 6.00-fold in comparison with that (33.98 mg/L) in the original basal medium. The results indicate that appropriate metal ions (i.e., Ca²⁺, Cu²⁺ and Al³⁺) could enhance palmarumycin production. Application of the metal ions should be an effective strategy for palmarumycin production in liquid culture of the endophytic fungus Berkleasmium sp. Dzf12.     

Interaction of heparin with Ca2+: A model study with a synthetic heparin-like hexasaccharide

The binding of Ca²⁺ to synthetic hexasaccharide 1 , containing the structural motifs of the regular region of heparin, has been investigated using NMR spectroscopy and molecular modeling. The NMR data of the calcium salt of 1 indicate the existence of specific Ca²⁺ binding, and molecular modeling results predict three different types of binding sites with different negative potential and preorganized geometry. The presence of Ca²⁺ does not seem to affect the overall helical structure of hexasaccharide 1 , although it seems to have a marked influence on the flexibility of the oligosaccharide backbone.     

Effect of La3+ substitution on the structural and thermoelectric properties of Ca3-xLaxCo4O9+δ

The thermoelectric properties of Ca₃Co₄O₉ were optimized by the substitution of La³⁺ for Ca²⁺ in Ca₃Co₄O₉. The La³⁺ substitution significantly enhanced the thermoelectric power factor and reduced the lattice thermal conductivity. The lattice thermal conductivities at 800 °C for x = 0 and 0.3 samples were 1.80 and 1.34 Wm⁻¹ K⁻¹, respectively. The reduced thermal conductivity was mainly attributed to mass and strain field fluctuations in the crystal lattice. Ca_2.7La_0.3Co₄O_9+δ showed the largest dimensionless figure-of-merit (0.282 at 800 °C) by combining high power factor and the lowest lattice thermal conductivity. This work demonstrates that the La³⁺ substitution is a highly effective approach for improving high-temperature thermoelectric properties.     

Computational Analyses of the AtTPC1 (Arabidopsis Two-Pore Channel 1) Permeation Pathway

Two Pore Channels (TPCs) are cation-selective voltage- and ligand-gated ion channels in membranes of intracellular organelles of eukaryotic cells. In plants, the TPC1 subtype forms the slowly activating vacuolar (SV) channel, the most dominant ion channel in the vacuolar membrane. Controversial reports about the permeability properties of plant SV channels fueled speculations about the physiological roles of this channel type. TPC1 is thought to have high Ca²⁺ permeability, a conclusion derived from relative permeability analyses using the Goldman–Hodgkin–Katz (GHK) equation. Here, we investigated in computational analyses the properties of the permeation pathway of TPC1 from Arabidopsis thaliana. Using the crystal structure of AtTPC1, protein modeling, molecular dynamics (MD) simulations, and free energy calculations, we identified a free energy minimum for Ca²⁺, but not for K⁺, at the luminal side next to the selectivity filter. Residues D269 and E637 coordinate in particular Ca²⁺ as demonstrated in in silico mutagenesis experiments. Such a Ca²⁺-specific coordination site in the pore explains contradicting data for the relative Ca²⁺/K⁺ permeability and strongly suggests that the Ca²⁺ permeability of SV channels is largely overestimated from relative permeability analyses. This conclusion was further supported by in silico electrophysiological studies showing a remarkable permeation of K⁺ but not Ca²⁺ through the open channel.     

Characterizing SERCA Function in Murine Skeletal Muscles after 35–37 Days of Spaceflight

It is well established that microgravity exposure causes significant muscle weakness and atrophy via muscle unloading. On Earth, muscle unloading leads to a disproportionate loss in muscle force and size with the loss in muscle force occurring at a faster rate. Although the exact mechanisms are unknown, a role for Ca²⁺ dysregulation has been suggested. The sarco(endo)plasmic reticulum Ca²⁺ ATPase (SERCA) pump actively brings cytosolic Ca²⁺ into the SR, eliciting muscle relaxation and maintaining low intracellular Ca²⁺ ([Ca²⁺]_i). SERCA dysfunction contributes to elevations in [Ca²⁺]_i, leading to cellular damage, and may contribute to the muscle weakness and atrophy observed with spaceflight. Here, we investigated SERCA function, SERCA regulatory protein content, and reactive oxygen/nitrogen species (RONS) protein adduction in murine skeletal muscle after 35–37 days of spaceflight. In male and female soleus muscles, spaceflight led to drastic impairments in Ca²⁺ uptake despite significant increases in SERCA1a protein content. We attribute this impairment to an increase in RONS production and elevated total protein tyrosine (T) nitration and cysteine (S) nitrosylation. Contrarily, in the tibialis anterior (TA), we observed an enhancement in Ca²⁺ uptake, which we attribute to a shift towards a faster muscle fiber type (i.e., increased myosin heavy chain IIb and SERCA1a) without elevated total protein T-nitration and S-nitrosylation. Thus, spaceflight affects SERCA function differently between the soleus and TA.     

Elimination of inorganic mercury from waste waters using crandallite‐type compounds

The removal of inorganic mercury from waste water streams arising from mines, using an artificial amorphous compound of the crandallite type synthesized in our laboratory, Ca_0.5Sr_0.5Al₃(OH)₆(HPO₄) (PO₄), has been investigated. This compound exhibits an extremely wide range of ionic substitutions: Ca²⁺ and Sr²⁺ were interchanged with Hg²⁺, so the mercury content of the waste water, ranging from 70 to 90 ppm, was reduced to less than 0.1 ppm. The process has been studied under batch conditions. The crandallite showed a high capacity for the exchange of mercury from mercuric nitrate solutions, 1.555 meq g^?1. The ion‐exchange equilibrium isotherms for Hg²⁺ were correlated by the Langmuir equation. The recovery of mercury from Hg‐crandallite using HCl solutions and thermal treatment was also studied. Optimum recuperation of mercury is achieved by chemical reaction with HCl solution (pH 2.25). At these conditions, 75% of the mercury is recovered as the HgCl₄^2? complex in a simple batch process, and the crandallite (in the protonic form) can be reused. © 2003 Society of Chemical Industry