Soft Template Synthesis of Super Paramagnetic Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> Nanoparticles a Novel Technique

The present study reports a facile technique for the synthesis of crystalline super paramagnetic nano ferrite (Fe₃O₄) particles using diethyl amine as a soft template. The spectral properties of Fe₃O₄ nanoparticles were characterized by UV–visible and Fourier Transform Infrared (FTIR) spectroscopies while the crystalline structure and particle size was estimated using X-Ray diffraction (XRD) as well as transmission electron microscopy (TEM) techniques. The super paramagnetic behavior of Fe₃O₄ nanoparticles was determined using vibrating sample magnetometer (VSM) at 300 K. The results of the studies revealed that this technique could be adopted to synthesize agglomerate free super paramagnetic Fe₃O₄ nanoparticles which may find potential application in the filed of biosensor and corrosion protective coatings.     

Synthesis and properties of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles by sol-vothermal method using iron(III) acetylacetonate

Well dispersed Fe₃O₄ nanoparticles were synthesized at 180°C by sol-vothermal method, using iron (III) acetylacetonate as iron source and poly-vinilpyrrolidone (PVP) as special surfactant. The factors affecting reaction system, such as reaction temperature and time, the amount of iron source and surfactant are discussed. The synthesized Fe₃O₄ particles show excellent saturation magnetization and super-paramagnetic properties, demonstrating their potential applicability in magnetic nanodevices and bio-medicine.     

Effect of HCl Concentration on the Dispersity of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> Nanoparticles

In this paper, monodisperse 6 nm-sized Fe₃O₄ nanoparticles with spinel crystalline structure were synthesized via a co-precipitation method. The effect of HCl concentrations on Fe₃O₄ samples was investigated by TEM, VSM and UV–vis. HCl-modified Fe₃O₄ nanoparticles solution was a stable, clear, transparent cationic colloid. The results showed that HCl had a great influence on the dispersity of Fe₃O₄ nanoparticles and almost no influence on the materials magnetism.     

One-pot method fabrication of superparamagnetic sulfonated polystyrene/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/graphene oxide micro-nano composites

In this work, using monodispersed sulfonated polystyrene (SPS) microspheres as carriers, FeCl₃·6H₂O and FeSO₄·7H₂O as precursors, NaOH as precipitant in the presence of graphene oxide (GO), SPS/Fe₃O₄/GO micro-nano composites were fabricated by a simple one-pot method employing an inverse coprecipitation in-situ compound technology. The SPS/Fe₃O₄/GO micro-nano composites were characterized by scanning electron microscopy, transmission electron microscopy, X-ray powder diffractometer, Fourier transform infrared spectroscopy, nitrogen adsorption/desorption isotherms and vibrating sample magnetometer. The results show that the SPS/Fe₃O₄/GO micro-nano composites were fabricated with SPS as core, GO and Fe₃O₄ nanoparticles as shell. The SPS/Fe₃O₄/GO micro-nano composites had larger BET specific surface area, average pore width and micropore volume than the pure SPS microspheres. Meanwhile, the SPS/Fe₃O₄/GO micro-nano composites had superparamagnetism and hydrophilic property. The saturation magnetization (M_s) of the SPS/Fe₃O₄/GO micro-nano composites was 10.86 emu/g, which was enough to ensure the convenient magnetic separation of solid and liquid phase.     

Research of mica/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> pearlescent pigment by co-precipitation

Experiments on preparation of mica/Fe₃O₄ pearlescent pigment were performed to discuss influences of several crucial parameters on final products. The samples were characterized by XRD, HRSEM, FTIR and color measurement, the content of Fe₃O₄ on the mica surface was also analyzed by XPS. It was found that the smoothness, compactness and colour deepness of the coating were influenced by different pH values and temperatures. The optimum preparation parameters of mica/Fe₃O₄ pearlescent pigment were obtained: the value of pH ≥ 9.2; the concentration of sodium hydroxide was 0.5 mol/l; the concentration ratio of Fe³⁺ to Fe²⁺ was 1.6 : 1; the velocity of magnetic stirring was 138 ≤ v ≤ 151 r/min; reaction temperature was 70–80°C; calcination temperature was 350°C and calcination time was 3 h.     

Preparation and characterization of spindle-like Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> mesoporous nanoparticles

Magnetic spindle-like Fe₃O₄ mesoporous nanoparticles with a length of 200 nm and diameter of 60 nm were successfully synthesized by reducing the spindle-like α-Fe₂O₃ NPs which were prepared by forced hydrolysis method. The obtained samples were characterized by transmission electron microscopy, powder X-ray diffraction, attenuated total reflection fourier transform infrared spectroscopy, field emission scanning electron microscopy, vibrating sample magnetometer, and nitrogen adsorption-desorption analysis techniques. The results show that α-Fe₂O₃ phase transformed into Fe₃O₄ phase after annealing in hydrogen atmosphere at 350°C. The as-prepared spindle-like Fe₃O₄ mesoporous NPs possess high Brunauer-Emmett-Teller (BET) surface area up to ca. 7.9 m² g^-1. In addition, the Fe₃O₄ NPs present higher saturation magnetization (85.2 emu g^-1) and excellent magnetic response behaviors, which have great potential applications in magnetic separation technology.     

A study on synthesis and properties of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles by solvothermal method

Magnetic nanoparticles (Fe₃O₄) were synthesized by the solvothermal method using FeCl₃ · 6H₂O and ethylene glycol as a reactant. Powder X-ray diffraction, FT-IR, TEM, SEM, and VSM were used to characterize the magnetic particles. The reacting factors, such as reacting time, the concentration of iron source and surfactant, especially the effect of NaAc · 3H₂O, were studied. The results indicated that NaAc · 3H₂O plays the role not only as a dispersant but also a structure-directing agent. The synthesized Fe₃O₄ particles showed excellent magnetic property, which made them have potential for application in magnetic nanodevices and biomedicine.     

Preparation of stable magnetic nanofluids containing Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@PPy nanoparticles by a novel one-pot route

Stable magnetic nanofluids containing Fe₃O₄@Polypyrrole (PPy) nanoparticles (NPs) were prepared by using a facile and novel method, in which one-pot route was used. FeCl₃·6H₂O was applied as the iron source, and the oxidizing agent to produce PPy. Trisodium citrate (Na₃cit) was used as the reducing reagent to form Fe₃O₄ NPs. The as-prepared nanofluid can keep long-term stability. The Fe₃O₄@PPy NPs can still keep dispersing well after the nanofluid has been standing for 1 month and no sedimentation is found. The polymerization reaction of the pyrrole monomers took place with Fe³⁺ ions as the initiator, in which these Fe³⁺ ions remained in the solution adsorbed on the surface of the Fe₃O₄ NPs. Thus, the core-shell NPs of Fe₃O₄@PPy were obtained. The particle size of the as-prepared Fe₃O₄@PPy can be easily controlled from 7 to 30 nm by the polymerization reaction of the pyrrole monomers. The steric stabilization and weight of the NPs affect the stability of the nanofluids. The as-prepared Fe₃O₄@PPy NPs exhibit superparamagnetic behavior.     

Chitosan- and dehydroascorbic acid-coated Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles: preparation,characterization and their potential as draw solute in forward osmosis process

Forward osmosis (FO) is a natural osmosis process that has attracted a significant attention due to its many advantages. However, the development of FO process depends on the development of proper draw solutions. In this work, chitosan (CS)-coated Fe₃O₄ nanoparticles and dehydroascorbic acid (DHAA)-coated Fe₃O₄ nanoparticles were successfully synthesized by co-precipitation method and their performance as draw solutes was investigated for application in FO systems. CS and DHAA could improve the surface hydrophilicity of the Fe₃O₄ nanoparticles. The synthesized nanoparticles were characterized by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray diffractometry (XRD), Fourier transform infrared spectroscopy (FTIR) and vibrating sample magnetometry (VSM) which the results presented a small size, crystalline morphology and high magnetization value for their structure as well as a good dispersion in water. Cellulose triacetate/cellulose acetate (CTA/CA)-based membranes were also prepared by immersion precipitation and used as FO membranes. The synthesized FO membranes were characterized by FESEM. The performance evaluation of synthesized nanoparticles revealed that the water flux of Fe₃O₄ nanoparticles capped with DHAA was higher than that of the chitosan-coated Fe₃O₄ nanoparticles. At the end of the process, the Fe₃O₄ nanoparticles were easily separated from the diluted draw solution by applying the magnetic field.     

Examining the use of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles to enhance the NH<Subscript>3</Subscript> sensitivity of polypyrrole films

Summary Polypyrrole (PPy) composite films with different contents of Fe₃O₄ were prepared by in-situ polymerization of pyrrole in aqueous solutions. The dependence of dc current changes on the response of the samples exposure to NH₃ vapor has been investigated. The results shows the composite films are more stable than the pristine ones after being exposed to NH₃ vapor. Meanwhile, the response time was reduced with increasing the Fe₃O₄ content in the films. The results might be originated from the structural changes in the PPy films caused by the addition of Fe₃O₄.     

Synthesis of polyvinyl alcohol hydrogel grafted by modified Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles: characterization and doxorubicin delivery studies

During the last two decades, serious efforts have been directed towards the synthesis and coating magnetic nanoparticles for biomedical applications. Among many different types of polymeric coating materials that have been utilized in previous studies, we have selected polyvinyl alcohol (PVA). In this study, we report a novel type of magnetite nanocomposite-based PVA hydrogel. For this purpose, first, Fe₃O₄ nanoparticles were modified through hexamethylene diisocyanate (HMDI) and then PVA was modified by bromoacetyl bromide to produce bromoacetylated PVA. The modified PVA was cross-linked through various diamines such as ethylene-diamine, propylene-diamine and hexamethylenediamine. The prepared weak tridimensional PVA hydrogels were further reacted through unreacted hydroxyl groups with Fe₃O₄, modified by HMDI to form magnetite hard tridimensional hydrogels. The swelling behavior of the prepared magnetite nanocomposites were investigated and showed a fast initial swelling followed by a mild increase until attaining equilibrium. The structural, morphological, thermal and magnetic properties of the synthesized magnetite nanocomposites were confirmed by FTIR, thermal gravimetric analysis, vibrating sample magnetometer and scanning electron microscopy. The doxorubicin anti-tumor drug was loaded on a selected synthesized magnetic hydrogel and in vitro drug release studies were done in phosphate buffer solution in 37 °C.     

Infrared Signature of Novel Super-Thermite (Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>/Mg) Fluorocarbon Nanocomposite for Effective Countermeasures of Infrared Seekers

Infrared (IR) guided missiles are real threat; they caused 90% of aircraft damage. Fluorocarbon polymer nanocomposite based on super-thermites can offer superior thermal signature to countermeasure IR guided missile seekers. This study reports on the sustainable fabrication of mono-dispersed colloidal Fe₂O₃ nanoparticles with 3 nm average particle size. Fe₂O₃ nanoparticles were dispersed in acetone for subsequent integration in fluorocarbon polymer. The impact of Fe₂O₃ content on thermal signature was evaluated using (FT-MIR 2–6 μm) spectrophotometer. Nanocomposite polymer with 8 wt% Fe₂O₃ offered an increase in the average intensity of α (2–3 μm) and β (4–5 μm) bands by 50 and 85% respectively to that of reference formulation. Quantification of stimulated emitting species in the combustion flame was conducted using ICT thermodynamic code. The developed nanothermite particles extended the primary reaction zone by 183%. Full discussions about combustion zones with associated exothermic chemical reactions have been represented.     

Preparation and properties of poly(acrylic acid-co-styrene)/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanocomposites

Poly(acrylic acid-co-styrene)/Fe₃O₄ nanocomposites were prepared using poly(acrylic acid-co-styrene) (P(AA-co-St)) and nano-Fe₃O₄ particles. The resultant materials were characterized by transmission electron microscope (TEM), Fourier transform infrared (FTIR), thermogravimetric analysis (TGA), advanced rheology expand system and superconducting quantum interference device (SQUID) magnetometer. The diameter of the magnetic particles was around 3–14 nm. The experimental results reveal that the acrylic acid segment of P(AA-co-St) can react with nano-Fe₃O₄. With increasing reaction time the storage modulus, loss modulus, complex viscosity and shear stress of the P(AA-co-St)/Fe₃O₄ ethanol suspension were increased, and the suspension changed from liquid-like behavior to gel-like behavior for the reaction between P(AA-co-St) and Fe₃O₄, as found during the rheology measurements. The thermal stability of P(AA-co-St) decreased with the addition of nano-Fe₃O₄, and the nanocomposites exhibited superparamagnetic properties above the blocking temperature.     

Heterogeneous Fenton degradation of Orange II by immobilization of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles onto Al-Fe pillared bentonite

A novel catalyst, Fe₃O₄ nanoparticle decorated Al-Fe pillared bentonite (Fe₃O₄/Al-Fe-P-B), was prepared by in situ precipitation oxidization method. The catalyst was characterized by SEM, XRD and Raman spectroscopy. The Fe₃O₄ nanoparticles mainly exist on the surface or enter into the pore of bentonite, with better dispersing and less coaggregation. The catalytic activity of Fe₃O₄/Al-Fe-P-B was investigated in the degradation of Orange II (OII) by heterogeneous Fenton-like process. The effects of initial concentration of hydrogen peroxide, catalyst loading, temperature and initial pH on the degradation of OII were investigated. The Fe₃O₄/Al-Fe-P-B showed higher degradation efficiency of OII than bare Fe₃O₄ or Al-Fe-P-B in the degradation experiment. The enhanced catalytic activity of Fe₃O₄/Al-Fe-P-B in heterogeneous Fenton system was due to the synergistic effect between Al-Fe-P-B and Fe₃O₄. The novel catalyst can achieve solid-liquid separation easily by sample magnetic separation and has a good reusability and stability.     

Experimental and theoretical analysis of element mercury adsorption on Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/Ag composites

A novel magnetic nano-sorbent Fe₃O₄/Ag was synthesized and applied to capture the elemental mercury from the simulated flue gas. The morphology, components and crystal phase of the sorbents were characterized by transmission electron microscope (TEM), energy dispersive spectrometry (EDS) and X-ray diffraction (XRD), respectively. The mercury removal performance of the sorbents was investigated through the fixed-bed tests. The results indicated that silver was successfully loaded on the surface of Fe₃O₄ particles, which could significantly enhance the Hg⁰ removal performance of the sorbents. Flue gas components, including CO₂, SO₂, and NO, have little impact on the Hg⁰ removal performance of Fe₃O₄/Ag sorbents, while O₂ has a slightly positive effect. The Hg⁰ removal efficiency decreased with the increasing of temperature, Hg⁰ inlet concentration and gas hourly space velocity. Only one broad mercury desorption peak at approximately 210 °C could be observed during the temperature-programmed desorption (TPD) process, which indicated that mercury species existing on the surface of Fe₃O₄/Ag sorbents might be elemental mercury instead of oxidized mercury. Furthermore, the reusability tests showed that the Fe₃O₄/Ag sorbents could be efficiently regenerated and reused. Finally, the theoretical analysis based on the DFT method showed that a weak chemisorption of Hg⁰ on Fe₃O₄ sorbents changed to a strong chemisorption when silver was loaded. The results of theoretical analysis conformed to the experiments results well.     

Recyclable Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@Tween20@Ag Nanocatalyst for Catalytic Degradation of Azo Dyes

Silver nanoparticles supported on superparamagnetic iron oxide (SPION)-Tween20 nanocomposite were prepared by a combined polyol and chemical reduction routes. The morphology, composition and structure of Fe₃O₄@Tween20@Ag nanocatalyst were characterized by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy, energy dispersive X-ray spectroscopy, thermal gravimetric analyzer, and X-ray powder diffraction. In addition the magnetic properties were evaluated with vibrating sample magnetometry. It was found that Fe₃O₄@Tween20@Ag nanocatalyst could catalyze the degradation of various organic azo dyes and could easily be recovered from the reaction medium with external magnet. Also, the magnetic catalyst can be succesfully recycled and reused for at least five successive degradation cycles of methyl orange, methylene blue and Rhodamine B, confirming a high recycling efficiency. The cost effective and recyclable Fe₃O₄@Tween20@Ag nanocatalyst provide an novel nanomaterials architecture for environmental remediation applications.     

Modification of Mg<Subscript>3</Subscript>Si<Subscript>2</Subscript>O<Subscript>5</Subscript>(OH)<Subscript>4</Subscript> nanotubes by magnetite nanoparticles

The magnetite nanoparticles and nanocomposite “Nanotube of hydrosilicate Mg—magnetite nanoparticles—Mg-ChR-NT/Fe₃O₄-NP” were obtained by coprecipitation. The composition of the synthesized samples has been established by X-ray diffraction. Using transmission electron microscopy, the presence of magnetite nanoparticles has been detected both inside the NTs and at the external surface of the NT walls. The specific surface of the NTs, nanoparticles, and composite is determined.     

Synthesis and thermal behavior of Fe<Subscript>3</Subscript>O<Subscript>2</Subscript>(BO<Subscript>4</Subscript>) oxoborate

Iron oxoborate Fe₃O₂(BO₄) has been first produced in solid-phase chemical reactions. Its thermal behavior in the temperature range 20–900°C is studied with the use in-situ high-temperature powder X-ray diffraction. It is shown that Fe₃O₂(BO₄) begins decomposing with the formation of Fe₂O₃ in the temperature range 660–900°C. Thermal expansion is sharply anisotropic at room temperature (α_max/α_min = 7) and becomes more isotropic with an increase in the temperature (α_max/α_min = 1.2). The degree of oxidation of Fe³⁺ has been confirmed by Mössbauer spectroscopy (at a room temperature), and two nonequivalent positions in the structure have been detected, which are occupied by iron atoms with the octahedral environment of the oxygen atoms.     

Super-Thermite (Al/Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>) Fluorocarbon Nanocomposite with Stimulated Infrared Thermal Signature via Extended Primary Combustion Zones for Effective Countermeasures of Infrared Seekers

Super-thermites can offer large amount of energy up to 16736 J/g. Flares based on super-thermites can offer superior thermal signature to countermeasure infrared (IR) guided missile seekers. This study reports on the sustainable fabrication of mono-dispersed Fe₂O₃ nanoparticles of 3 nm average particle size. Colloidal Fe₂O₃ nanoparticles were harvested from their synthesis medium and re-dispersed in acetone. Fluorocarbon polymers (teflon and viton) as well as aluminum metal fuel were integrated into Fe₂O₃/acetone colloid. The colloid mixture was granulated and mold pressed to develop the desired grain. The impact of Fe₂O₃ nanoparticles on thermal signature was assessed using (FT-MIR 1–6 µm) spectrometer. Flame propagation was investigated by video imaging of combustion wave. Combustion zones were quantified using image analysis. Quantification of flame temperature and main IR emitting species was performed using ICT thermodynamic code (virgin 2008). Nanocomposite flare with 12 wt% Fe₂O₃ offered an increase in the intensity of β band by 230% to that of reference formulation. The primary reaction zone was extended by 164%. Super-thermite particles not only offered superior spectral performance but also altered the combustion mechanism.     

One-Pot Green Synthesis and Bioapplication of<Emphasis Type="SmallCaps">l</Emphasis>-Arginine-Capped Superparamagnetic Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> Nanoparticles

Water-soluble l-arginine-capped Fe₃O₄ nanoparticles were synthesized using a one-pot and green method. Nontoxic, renewable and inexpensive reagents including FeCl₃, l-arginine, glycerol and water were chosen as raw materials. Fe₃O₄ nanoparticles show different dispersive states in acidic and alkaline solutions for the two distinct forms of surface binding l-arginine. Powder X-ray diffraction and X-ray photoelectron spectroscopy were used to identify the structure of Fe₃O₄ nanocrystals. The products behave like superparamagnetism at room temperature with saturation magnetization of 49.9 emu g⁻¹ and negligible remanence or coercivity. In the presence of 1-ethyl-3-(dimethylaminopropyl) carbodiimide hydrochloride, the anti-chloramphenicol monoclonal antibodies were connected to the l-arginine-capped magnetite nanoparticles. The as-prepared conjugates could be used in immunomagnetic assay.