Improved activity and stability of pseudomonas capaci lipase in a novel biocompatible ionic liquid, 1‐isobutyl‐3‐methylimidazolium hexafluorophosphate

BACKGROUND: Enzymes may exhibit enhanced activity, stability and selectivity in ionic liquids, depending on the properties of the liquid. The physical–chemical properties of ionic liquids, however, may be modified by altering the anion or cation in the ionic liquid. This feature is a key factor for realizing successful reactions. In this work, a new ionic liquid, 1‐isobutyl‐3‐methylimidazolium hexafluorophosphate (abbreviated as [i‐C₄mim][PF₆]), was synthesized and investigated as a novel medium for the transesterification reaction of 2‐phenylethanol with vinyl acetate catalyzed by pseudomonas capaci lipase. As contrasts, the reaction was also carried out in two reference solvents; the isomeric ionic liquid [i‐C₄mim][PF₆], 1‐butyl‐3‐methylimidazolium hexafluorophosphate (abbreviated as [C₄mim][PF₆]), and hexanes. RESULTS: As reaction medium, [i‐C₄mim][PF₆] was best among the three solvents. The initial reaction rate, the equilibrium conversion of 2‐phenylethanol and the half‐lifetime of the lipase in [i‐C₄mim][PF₆] medium were about 1.5, 1.2 and 3‐fold that obtained in [C₄mim][PF₆] medium, respectively. The lipase in [i‐C₄mim][PF₆] medium was recycled 10 times without substantial diminution in activity. CONCLUSION: The ionic liquid [i‐C₄mim][PF₆] has good biocompatibility, and can be used widely as green media in various biocatalysis reactions to improve the activity and stability of enzymes. Besides hydrophobicity and nucleophilicity, the spatial configuration of ionic liquids is also considered a key factor effecting the behaviour of the enzyme in ionic liquids. Copyright © 2008 Society of Chemical Industry     

Chemical Synthesis of Rare Natural Bile Acids: 11α‐Hydroxy Derivatives of Lithocholic and Chenodeoxycholic Acids

A method for the preparation of 11α‐hydroxy derivatives of lithocholic and chenodeoxycholic acids, recently discovered to be natural bile acids, is described. The principal reactions involved were (1) elimination of the 12α‐mesyloxy group of the methyl esters of 3α‐acetate‐12α‐mesylate and 3α,7α‐diacetate‐12α‐mesylate derivatives of deoxycholic acid and cholic acid with potassium acetate/hexamethylphosphoramide; (2) simultaneous reduction/hydrolysis of the resulting △¹¹‐3α‐acetoxy and △¹¹‐3α,7α‐diacetoxy methyl esters with lithium aluminum hydride; (3) stereoselective 11α‐hydroxylation of the △¹¹‐3α,24‐diol and △¹¹‐3α,7α,24‐triol intermediates with B₂H₆/tetrahydrofuran (THF); and (4) selective oxidation at C‐24 of the resulting 3α,11α,24‐triol and 3α,7α,11α,24‐tetrol to the corresponding C‐24 carboxylic acids with NaClO₂ catalyzed by 2,2,6,6‐tetramethylpiperidine 1‐oxyl free radical (TEMPO) and NaClO. In summary, 3α,11α‐dihydroxy‐5β‐cholan‐24‐oic acid and 3α,7α,11α‐trihydroxy‐5β‐cholan‐24‐oic acid have been synthesized and their nuclear magnetic resonance (NMR) spectra characterized. These compounds are now available as reference standards to be used in biliary bile acid analysis.     

[Carboxyl‐11C]Labelling of Four High‐Affinity cPLA2α Inhibitors and Their Evaluation as Radioligands in Mice by Positron Emission Tomography

Cytosolic phospholipase A2α (cPLA2α) may play a critical role in neuropsychiatric and neurodegenerative disorders associated with oxidative stress and neuroinflammation. An effective PET radioligand for imaging cPLA2α in living brain might prove useful for biomedical research, especially on neuroinflammation. We selected four high‐affinity (IC₅₀ 2.1–12 nm ) indole‐5‐carboxylic acid‐based inhibitors of cPLA2α, namely 3‐isobutyryl‐1‐(2‐oxo‐3‐(4‐phenoxyphenoxy)propyl)‐1H‐indole‐5‐carboxylic acid ( 1 ); 3‐acetyl‐1‐(2‐oxo‐3‐(4‐(4‐(trifluoromethyl)phenoxy)phenoxy)propyl)‐1H‐indole‐5‐carboxylic acid ( 2 ); 3‐(3‐methyl‐1,2,4‐oxadiazol‐5‐yl)‐1‐(2‐oxo‐3‐(4‐phenoxyphenoxy)propyl)‐1H‐indole‐5‐carboxylic acid ( 3 ); and 3‐(3‐methyl‐1,2,4‐oxadiazol‐5‐yl)‐1‐(3‐(4‐octylphenoxy)‐2‐oxopropyl)‐1H‐indole‐5‐carboxylic acid ( 4 ), for labelling in carboxyl position with carbon‐11 (t_1/2=20.4 min) to provide candidate PET radioligands for imaging brain cPLA2α. Compounds [¹¹C] 1 – 4 were obtained for intravenous injection in adequate overall yields (1.1–5.5 %) from cyclotron‐produced [¹¹C]carbon dioxide and with moderate molar activities (70–141 GBq μmol^?1) through the use of Pd⁰‐mediated [¹¹C]carbon monoxide insertion on iodo precursors. Measured logD_7.4 values were within a narrow moderate range (1.9–2.4). After intravenous injection of [¹¹C] 1 – 4 in mice, radioactivity uptakes in brain peaked at low values (≤0.8 SUV) and decreased by about 90 % over 15 min. Pretreatments of the mice with high doses of the corresponding non‐radioactive ligands did not alter brain time–activity curves. Brain uptakes of radioactivity after administration of [¹¹C] 1 to wild‐type and P‐gp/BCRP dual knock‐out mice were similar (peak 0.4 vs. 0.5 SUV), indicating that [¹¹C] 1 and others in this structural class, are not substrates for efflux transporters.     

Synthesis and Pharmacological Evaluation of α4β2 Nicotinic Ligands with a 3‐Fluoropyrrolidine Nucleus

Nicotinic acetylcholine receptors (nAChRs) play an important role in many central nervous system disorders such as Alzheimer’s and Parkinson’s diseases, schizophrenia, and mood disorders. The α₄β₂ subtype has emerged as an important target for the early diagnosis and amelioration of Alzheimer’s disease symptoms. Herein we report a new class of α₄β₂ receptor ligands characterized by a basic pyrrolidine nucleus, the basicity of which was properly decreased through the insertion of a fluorine atom at the 3‐position, and a pyridine ring carrying at the 3‐position substituents known to positively affect affinity and selectivity toward the α₄β₂ subtype. Derivatives 3‐(((2S,4R)‐4‐fluoropyrrolidin‐2‐yl)methoxy)‐5‐(phenylethynyl)pyridine ( 11 ) and 3‐((4‐fluorophenyl)ethynyl)‐5‐(((2S,4R)‐4‐fluoropyrrolidin‐2‐yl)methoxy)pyridine ( 12 ) were found to be the most promising ligands identified in this study, showing good affinity and selectivity for the α₄β₂ subtype and physicochemical properties predictive of a relevant central nervous system penetration.     

Dehydrogenation of 11α‐hydroxy‐16α, 17‐epoxyprogesterone by encapsulated Arthrobacter simplex cells in an aqueous/organic solvent two‐liquid‐phase system

BACKGROUND: Arthrobacter simplex cells immobilised in sodium cellulose sulfate/poly‐dimethyl‐diallyl‐ammonium chloride microcapsules were used for the microbial dehydrogenation of 11α‐hydroxy‐16α,17‐epoxyprogesterone to 11α‐hydroxy‐16α,17α‐epoxypregn‐1,4‐diene‐3,20‐dione in an aqueous/organic solvent two‐liquid‐phase system, which is a key reaction in the production of glucocorticoid pharmaceuticals. The aim of the study was to establish a suitable aqueous/organic solvent two‐liquid‐phase system for performing semi‐continuous production in an airlift loop reactor by encapsulated A. simplex cells with the addition of suitable surfactants to achieve a higher yield of the product. RESULTS: n‐Hexane was selected as the most suitable organic solvent. In optimised Tween‐80 emulsion feed mode the conversion in the airlift loop reactor was as high as 97.54% when the time of reaction was 2 h, and the reaction time was greatly shortened. In semi‐continuous production the cultivation with immobilised cells was carried out for five batches in total. The conversion in each batch was above 95% and the enzymatic activity still remained quite high after five batches of biotransformation. CONCLUSION: The results showed that performing the conversion by this method shortened the reaction time and increased the productivity, thus demonstrating the great potential of the method for the dehydrogenation of 11α‐hydroxy‐16α,17‐epoxyprogesterone. Copyright © 2008 Society of Chemical Industry     

N,N′‐Dioxide‐Magnesium Ditriflate Complex‐Catalyzed Asymmetric α‐Hydroxylation of β‐Keto Esters and β‐Keto Amides

The highly catalytic asymmetric α‐hydroxylation of 1‐tetralone‐derived β‐keto esters and β‐keto amides using tert‐butyl hydroperoxide (TBHP) as the oxidant was realized by a chiral N,N′‐dioxide‐magnesium ditriflate [Mg(OTf)₂] complex. A series of corresponding chiral α‐hydroxy dicarbonyl compounds was obtained in excellent yields (up to 99%) with excellent enantioselectivities (up to 98% ee). The products were easily transformed into useful building blocks and the precursor of daunomycin was achieved in an asymmetric catalytic way for the first time.     

Chiral Bioinspired Non‐Heme Iron Complexes for Enantioselective Epoxidation of α,β‐Unsaturated Ketones

Chiral bioinspired iron complexes of N₄ ligands based on the ethylenediamine backbone display remarkable levels of enantioselectivity for the first time in the asymmetric epoxidation of α,β‐unsaturated ketones using hydrogen peroxide (up to 87% ee) or peracetic acid as oxidant, respectively. Notablely, isotopic labeling with H₂¹⁸O strongly demonstrated that there is a reversible water binding step prior to generation of the significant intermediate. Besides, the complex [L₂Fe(III)₂(μ‐O)(μ‐CH₃CO₂)]³⁺ usually derived from the decay of the LFe(IV)O species or thermodynamic sinks for a number of iron complexes was identified by HR‐MS. In addition, the possible mechanisms were proposed and LFe(V)O species may be the main active intermediate in the catalytic system.     

Ionic Liquid, 1‐n‐Butyl‐3‐methylimidazolium Bis(trifluoromethanesulfonyl)imide,Resulted in the First Catalyst‐Free Aminohalogenation of Electron‐Deficient Alkenes

The 2‐Ns‐based aminohalogenation of α,β‐unsaturated ketones has been achieved in an ionic liquid, 1‐n‐butyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide {[bmim][N(SO₂CF₃)₂]}. [Bmim][N(SO₂CF₃)₂] was found to be superior not only to classical organic solvents but also to its counterpart, [bmim][BF₄], which was proven to be successful in the TsNCl₂‐based aminohalogenation but failed to give any product for this reaction. The present process takes the advantage of 2‐NsNCl₂ as the stable nitrogen/halogen source in a one‐pot operation without the use of any metal catalysts, it is convenient to perform without special protection of inert gases. Eight examples were examined with good to excellent stereoselectivity (1:5 to one isomer) and modest to good chemical yields (53–72 %).     

Copper‐Catalyzed Cyclization and Azidation of γ,δ‐Unsaturated Ketone O‐Benzoyl Oximes

An intramolecular imination/azidation sequence has been realized through the tetrakis(acetonitrile)copper(I) hexafluorophophate [Cu(CH₃CN)₄PF₆]‐catalyzed reaction of γ,δ‐unsaturated ketone O‐benzoyl oximes with trimethylsilyl azide (TMSN₃). The reaction proceeds via the copper‐mediated N O cleavage and subsequent C N forming 5‐exo cyclization. The thus formed intermediate is then azidated to afford the corresponding dihydropyrrole product. Preliminary mechanistic investigations suggest that the cyclization step does not involve a radical intermediate.

     

An investigation into the degree and rate of polymerization of poly(methyl methacrylate) in the ionic liquid 1‐butyl‐3‐methylimidazolium hexafluorophosphate

Room‐temperature ionic liquids (ILs), including 1‐butyl‐3‐methylimidazolium hexafluorophosphate, [bmim⁺][PF₆^?], were investigated as replacements for volatile organic compounds in the free‐radical solution polymerization of poly(methyl methacrylate) (PMMA). The latter was synthesized in benzene and [bmim⁺][PF₆^?] at 70 °C via a free‐radical process and the degree and rate of polymerization were compared based on the solvent used. The degree of polymerization was found to be five times higher in [bmim⁺][PF₆^?] than in benzene, while the rate of reaction was approximately four times faster in [bmim⁺][PF₆^?]. The results indicate the potential for using ILs to produce high‐molecular‐weight polymers and block structures based on the increased free‐radical stability in ILs. Copyright © 2004 Society of Chemical Industry     

Polyaniline doped with α, ω‐alkanedisulfonic acids: preparation and characterization

The use of α, ω‐alkanedisulfonic acid, HO₃S(CH₂)_nSO₃H (n = 1, 4, 6 and 12), as a dopant for polyaniline (PANi) was investigated. This series of disulfonic acids with varying chain lengths were synthesized and used in the doping of PANi. The doped polymers showed conductivity in the range 10^?2 to 10^?1 S cm^?1. Thermal studies showed that the doped polymers, depending on the chain length of α,ω‐alkanedisulfonic acid, were stable up to ca 300 °C and the thermal stability decreased with increasing dopant chain length. The thermal stability of α,ω‐alkanedisulfonic acid‐doped PANi was higher than that of alkanesulfonic acid‐doped PANi which typically degrades around 250 °C, suggesting a moderately broader processing window for α,ω‐alkanedisulfonic acid‐doped PANi for blending with other thermoplastics. Copyright © 2012 Society of Chemical Industry     

Multi‐Enzymatic Synthesis of Optically Pure β‐Hydroxy α‐Amino Acids

A novel enzymatic production system of optically pure β‐hydroxy α‐amino acids was developed. Two enzymes were used for the system: an N‐succinyl L ‐amino acid β‐hydroxylase (SadA) belonging to the iron(II)/α‐ketoglutarate‐dependent dioxygenase superfamily and an N‐succinyl L ‐amino acid desuccinylase (LasA). The genes encoding the two enzymes are part of a gene set responsible for the biosynthesis of peptidyl compounds found in the Burkholderia ambifaria AMMD genome. SadA stereoselectively hydroxylated several N‐succinyl aliphatic L ‐amino acids and produced N‐succinyl β‐hydroxy L ‐amino acids, such as N‐succinyl‐L ‐β‐hydroxyvaline, N‐succinyl‐L ‐threonine, (2S,3R)‐N‐succinyl‐L ‐β‐hydroxyisoleucine, and N‐succinyl‐L ‐threo‐β‐hydroxyleucine. LasA catalyzed the desuccinylation of various N‐succinyl‐L ‐amino acids. Surprisingly, LasA is the first amide bond‐forming enzyme belonging to the amidohydrolase superfamily, and has succinylation activity towards the amino group of L ‐leucine. By combining SadA and LasA in a preparative scale production using N‐succinyl‐L ‐leucine as substrate, 2.3 mmol of L ‐threo‐β‐hydroxyleucine were successfully produced with 93% conversion and over 99% of diastereomeric excess. Consequently, the new production system described in this study has advantages in optical purity and reaction efficiency for application in the mass production of several β‐hydroxy α‐amino acids.

     

Optimization of α‐amylase production in solid substrate fermentation

Response surface methodology (RSM) was used to optimize the medium components of α‐amylase production using solid substrate fermentation (SSF). Hazelnut cake (HC), peptone, yeast extract (YE), and (NH₄)₂SO₄ were selected as independent variables for optimization. Central composite design (CCD) was used in design experiments and analysis results. This procedure limited the number of actual experiments performed while allowing possible interactions between the independent variables. By using CCD, 30 experiments were performed for determining the interaction of independent variables and optimization of fermentation medium. The P‐value of the coefficient of linear effect of (NH₄)₂SO₄ concentrations, which was obtained as 0.0001 has shown that this parameter has the greatest effect on the production of α‐amylase. Model F‐value (5.62) implies that the model is significant. The highest α‐amylase activity (4895 IU) was measured when the HC, peptone, YE, and (NH₄)₂SO₄ concentrations in the medium were 22.62, 5.20, 1.62, and 6.81 g L^?1, respectively.     

Three‐Component One‐Pot Synthesis of α‐Hydroxylamino Phosphonates using Ionic Liquids

α‐Hydroxylamino phosphonates are synthesised in a one‐pot operation by three‐component coupling reactions of aldehydes, hydroxylamines and diethyl phosphite using 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([bmim]BF₄) or 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([bmim]PF₆) ionic liquids under mild and neutral conditions. The recovered ionic liquids can be recycled for four to five runs without loss of activity.     

Ruthenium(II)‐Catalyzed Regioselective Synthesis of Allyl Ketones from Alkynes and their Silver(I)‐Catalyzed Hydroarylation into γ‐Functionalized Ketones

The regioselective synthesis of β,γ‐unsaturated ketones from terminal alkynes is achieved by cooperative action of tris(acetonitrile)pentamethylcyclopentadieneruthenium hexafluorophosphate [Cp*Ru(NCMe)₃⁺ PF₆⁻] and para‐toluenesulfonic acid catalysts. These allyl ketones undergo direct regioselective hydroarylation/Friedel–Crafts reaction to introduce an electron‐rich aryl group at the γ‐position in the presence of ligand‐free silver triflate (AgOTf) catalyst. Both catalytic reactions take place with atom economy and provide an alternative to the synthesis of a variety of allyl ketones and γ‐arylated ketones.     

Highly Enantioselective Phase‐Transfer Catalytic α‐Alkylation of α‐tert‐Butoxycarbonyllactams: Construction of β‐Quaternary Chiral Pyrrolidine and Piperidine Systems

A new enantioselective α‐alkylation of α‐tert‐butoxycarbonyllactams for the construction of β‐quaternary chiral pyrrolidine and piperidine core systems is reported. α‐Alkylations of N‐methyl‐α‐tert‐butoxycarbonylbutyrolactam and N‐diphenylmethyl‐α‐tert‐butoxycarbonylvalerolactam under phase‐transfer catalytic conditions (solid potassium hydroxide, toluene, −40 °C) in the presence of (S,S)‐3,4,5‐trifluorophenyl‐3,3′,5,5′‐tetrahydro‐2,6‐bis(3,4,5‐trifluorophenyl)‐4,4′‐spirobi[4H‐dinaphth[2,1‐c:1′,2′‐e]azepinium] bromide [(S,S)‐NAS Br] (5 mol%) afforded the corresponding α‐alkyl‐α‐tert‐butoxycarbonyllactams in very high chemical (up to 99%) and optical yields (up to 98% ee). Our new catalytic systems provide attractive synthetic methods for pyrrolidine‐ and piperidine‐based alkaloids and chiral intermediates with β‐quaternary carbon centers.     

Atom‐transfer radical polymerization of methyl methacrylate with α,α′‐dichloroxylene/CuCl/N,N,N′,N″,N″‐pentamethyldiethylenetriamine initiation system under microwave irradiation

The atom‐transfer radical polymerization (ATRP) of methyl methacrylate (MMA), using α,α′‐dichloroxylene as initiator and CuCl/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as catalyst was successfully carried out under microwave irradiation (MI). The polymerization of MMA under MI showed linear first‐order rate plots, a linear increase of the number‐average molecular weight with conversion, and low polydispersities, which indicated that the ATRP of MMA was controlled. Using the same experimental conditions, the apparent rate constant (k) under MI (k = 7.6 × 10^?4 s^?1) was higher than that under conventional heating (k = 5.3 × 10^?5 s^?1). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2189–2195, 2004     

Influence of Annealing on Mechanical αc‐Relaxation of Isotactic Polypropylene: A Study from the Intermediate Phase Perspective

The influence of annealing on mechanical α_c‐relaxation of isotactic polypropylene (i PP) is investigated. In the sample without annealing, polymer chains in the intermediate phase are constrained by crystallites with a broad size distribution, leading to one α_c‐relaxation peak with activation energy (E _a) of 53.39 kJ mol⁻¹. With an annealing temperature between 60 and 105 °C imperfect lamellae melting releases a part of the constraining force. Consequently, two α_c‐relaxation peaks can be observed (α_c1‐ and α_c2‐relaxation in the order of increasing temperature). Both relaxation peaks shift to higher temperatures as annealing temperature increases. E _a of α_c1‐relaxation decreases from 38.43 to 35.55 kJ mol⁻¹ as the intermediate phase thickness increases from 2.0 to 2.2 nm. With an annealing temperature higher than 105 °C, a new crystalline phase is formed, which enhances the constraining force on the polymer chains. So the α_c1‐relaxation peak is broadened and its position shifts to a higher temperature. Moreover, the polymer chains between the initial and the newly formed crystalline phase are strongly confined. Therefore, the α_c2‐relaxation is undetectable. E _a of α_c1‐relaxation decreases from 23.58 to 13.68 kJ mol⁻¹ as the intermediate phase thickness increases from 2.3 to 3.0 nm.     

The preparation of α‐bis and α,ω‐tetrakis aromatic oxazolyl‐ and carboxyl‐functionalized polymers using 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene in atom transfer radical polymerization reactions

The preparation of new compounds, 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethanol and a new symmetrically disubstituted 1,1‐diphenylethylene derivative, 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene, is described. 1,1‐Bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene was utilized as a dioxazolyl initiator precursor for the polymerization of styrene by atom transfer radical polymerization (ATRP) methods to produce α‐bis(oxazolyl) polystyrene. The kinetic study of the polymerization process indicated that the free radical polymerization reaction for the preparation of α‐bis(oxazolyl) polystyrene follows first‐order rate kinetics with respect to monomer consumption. α,ω‐Tetrakis(oxazolyl) polystyrene was prepared by a new, in situ, controlled/living, post‐ATRP chain‐end‐functionalization reaction which involves the direct addition of 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene to the ω‐terminus of the α‐bis(oxazolyl) polystyrene derivative, without the isolation and purification of the polymeric precursor. α‐Bis(carboxyl) and α,ω‐tetrakis(carboxyl) polystyrene derivatives were obtained by the quantitative chemical transformation of the oxazoline groups of the respective aromatic oxazolyl chain‐end‐functionalized polystyrene derivatives to the aromatic carboxyl groups. The organic precursor compounds, the dioxazolyl‐functionalized 1,1‐diphenylethylene derivative and the functionalized polymers were characterized using ¹H NMR and ¹³C NMR spectrometry and Fourier transform infrared spectroscopy, size‐exclusion and thin‐layer chromatography and non‐aqueous titration measurements. © 2014 Society of Chemical Industry     

Direct Decarboxylative Alkynylation of α,α‐Difluoroarylacetic Acids under Transition Metal‐Free Conditions

An efficient and generally applicable protocol for decarboxylative coupling of α,α‐difluoroarylacetic acids with ethynylbenziodoxolone (EBX) reagents has been developed, affording α,α‐difluoromethylated alkynes bearing various functional groups in moderate to excellent yields. Remarkably, this potassium persulfate (K₂S₂O₈)‐promoted reaction employs water as solvent under transition metal‐free conditions, thus providing a green synthetic approach to α,α‐difluoromethylated alkynes.