Identification, FT-IR, NMR (H and C) and GC/MS studies of fatty acid methyl esters in biodiesel from rocket seed oil

Biodiesel was synthesized from rocket seed oil by base-catalyzed transesterification with methanol. The synthesis of biodiesel was confirmed by FT-IR and NMR (¹H and ¹³C) spectroscopy. Various fuel properties of the synthesized biodiesel were determined using ASTM methods and discussed accordingly. A total of eleven fatty acid methyl esters (FAMEs) were identified in rocket seed oil biodiesel (RSOB) by the retention time and the fragmentation pattern data of GC/MS analysis. The identified FAMEs were, methyl 9-hexadecenoate (C16:1), 14-methyl pentadecanoate (C16:0), methyl 9,12-octadecadienoate (C18:2), methyl 9-octadecenoate (C18:1), methyl octadecanoate (C18:0), methyl 11-eicosenoate (C20:1), methyl eicosanoate (C20:0), methyl 13-docosenoate (C22:1), methyl docosanoate (C22:0), methyl 15-tetracosenoate (24:1) and methyl tetracosanoate (C24:0). The percentage conversion of triglycerides to corresponding methyl esters determined by ¹H NMR was 88.49%.     

Synthesis of oxygenated fatty acid esters from santalbic acid ester

The reaction of methyl octadec-trans-11-en-9-ynoate (1) with mercuric sulfate in the presence or absence of sulfuric acid is described. Treatment of 1 with mercuric sulfate in absolute methanol yielded methyl 9(10)-oxoocta-dec-trans-11-enoates (Product A). This product, upon treatment withm-chloroperbenzoic acid, afforded methyltrans-11,12-epoxy-9-oxooctadecanoate (4) and methyl 10-oxooctadec-trans-11-enoate (2). Sodium borohydride reduction of A furnished the corresponding hydroxy esters. The treatment of 1 with mercuric sulfate in the presence of sulfuric acid gave as major product methyl 9(10)-oxo-11(12)-methoxyoctadecanoates and methyl 9(10)-oxoocta-dec-trans-11-enoates as a minor product. When methyl 11,12-epoxyoctadec-9-ynoate was reacted with acid in methanol, methyl 12-hydroxy-11-methoxyoctadec-9-ynoate was formed, which on treatment with zinc chloride in CCl₄ yielded methyl 9,12-epoxyoctadec-9,11-dienoate exclusively. The preparation of oxo fatty esters from the total methyl esters ofSantalum album was also demonstrated. The structures of the products were established by chemical derivatization and spectral characterization.     

Impact,Thermal, and Morphological Properties of Poly(Lactic Acid)/Poly(Methyl Methacrylate)/Halloysite Nanotube Nanocomposites

Poly(lactic acid)/poly(methyl methacrylate) blends containing halloysite nanotube (2 and 5 phr) and epoxidized natural rubber (5–15 phr) were prepared by melt mixing. The impact strength of poly(lactic acid)/poly(methyl methacrylate) blend was slightly improved by the addition of halloysite nanotube. Adding epoxidized natural rubber further increased the impact strength of poly(lactic acid)/poly(methyl methacrylate)/halloysite nanotube nanocomposite. Single T_g of poly(lactic acid)/poly(methyl methacrylate) is observed and this indicates that poly(lactic acid)/poly(methyl methacrylate) blend is miscible. The addition of halloysite nanotube into poly(lactic acid)/poly(methyl methacrylate) slightly increased the T_g of the blends. The epoxidized natural rubber could encapsulate some of the halloysite nanotube and prevent the halloysite nanotube from breaking into shorter length tube during the melt shearing process.     

The rearrangement of fatty cyclopropenoids in the presence of boron trifluoride

The destruction of the cyclopropenoid ring system of methyl 9,10 methyleneoctadec-9-enoate (methyl sterculate) with boron trifluoride etherate has been shown to give a complex mixture of products, including methyl esters of C₁₉ allenes (12%), a C₁₈ alkyne (11%) and a variety of C₁₉ and C₂₀ conjugated dienes containing either a methyl or methylene branch. The methylene group lost from the methyl sterculate reactant in the formation of methyl octadec-9-ynoate is incorporated into a second molecule of reactant to yield a mixture of methyl 9-methylene-trans-nonadec-10-enoate and the 11-methylene-trans-9-isomer.     

Analysis of hydroxylated fatty acids from plant oils

A novel process has been described recently for the preparation of hydroxylated fatty acids (HOFA) and HOFA methyl esters from plant oils. HOFA methyl esters prepared from conventional and alternative plant oils were characterized by various chromatographic methods (thin-layer chromatography, high-performance liquid chromatography, and gas chromatography) and gas chromatography-mass spectrometry as well as¹H and¹³C nuclear magnetic resonance spectroscopy. HOFA methyl esters obtained fromEuphorbia lathyris seed oil, low-erucic acid rapeseed oil, and sunflower oil contain as major constituents methylthreo-9,10-dihydroxy octadecanoate (derived from oleic acid) and methyl dihydroxy tetrahydrofuran octadecanoates, e.g., methyl 9,12-dihydroxy-10,13-epoxy octadecanoates and methyl 10,13-dihydroxy-9,12-epoxy octadecanoates (derived from linoleic acid). Other constituents detected in the products include methyl esters of saturated fatty acids (not epoxidized/derivatized) and traces of methyl esters of epoxy fatty acids (not hydrolyzed). The products that contain high levels of monomeric HOFA may find wide application in a variety of technical products.     

Synthesis of novel tri- and tetrasubstituted C<Subscript>18</Subscript> furan fatty esters

A methylene-interrupted C₁₈ keto-acetylenic fatty ester (methyl 12-oxo-9-octadecynoate) was obtained from methyl ricinoleate by bromination-dehydrobromination followed by oxidation. Reaction of methyl 12-oxo-9-octadecynoate with bis(benzonitrile) palladium(II) chloride, allyl bromide, or methyl-allyl bromide furnished methyl 8-[5-hexyl-3-allyl-furan-2-yl]-octanoate (1, 56%) or methyl 8-[5-hexyl-3-(2-methyl-allyl)-furan-2-yl]-octanoate (2, 55%). Reaction of methyl 12-oxo-11-chloro-or 11-fluoro-9-octadeyynoate (prepared from methyl santalbate-methyl 11-E-9-octadecynoate, found in sandalwood, Santalum album, seed oil) with bis(benzonitrile) palladium(II) chloride gave methyl 8-(4-fluoro-5-hexyl-furan-2-yl)-octanoate (3, 50%) or methyl 8-(4-fluoro-5-hexyl-furan-2-yl)-octanoate (4, 50%), respectively. And when methyl 12-oxo-11-chloro- or 11-fluoro-9-octadecynoate was treated with a mixture of bis(benzonitrile) palladium(II) chloride, allyl bromide, or methyl-allyl bromide, the reaction yielded tetrasubstituted C₁₈ furan derivatives, viz, methyl 8-(3-allyl-4-chloro-5-hexyl-furan-2-yl)-octanoate (5, 54%), methyl 8-[4-chloro-5-hexyl-3-(2-methyl-allyl)-furan-2-yl)-octanoate (6, 54%), methyl 8-(3-allyl-4-fluoro-5-hexyl-furan-2-yl]-octanoate (7, 10%), and methyl 8-[4-fluoro-5-hexyl-3-(2-methyl-allyl)-furan-2-yl]-octanoate (8, 10%). The presence of a fluorine atom in the furan derivatives 4, 7, and 8 was readily characterized by the appearance of doublets for carbon nuclei, which were coupled to the fluorine atom in the ¹³C NMR spectra. All furan fatty derivatives from this work were characterized by NMR spectroscopic and mass spectrometric analyses. The yields of compounds 7 and 8 were very low (10%) despite attempts to improve the procedure by increasing the amounts of the reactants and catalyst.     

Preparation of malvalic and sterculic acid methyl esters from Bombax munguba and Sterculia foetida seed oils

A method has been developed for the preparation of highly pure malvalic (cis-8,9-methyleneheptadec-8-enoic) and sterculic (cis-9,10-methyleneoctadec-9-enoic) acid methyl esters starting from Bombax munguba and Sterculia foetida seed oils. The methyl esters of these oils were prepared by sodium methylate-catalyzed transmethylation followed by cooling (6°C) the hexane solution of crude methyl esters and separation of insoluble fatty acid methyl esters by centrifugation in the case of B. munguba and by column chromatography in the case of S. foetida. Subsequently, the saturated straight-chain fatty acid methyl esters were almost quantitatively removed by urea adduct formation. Finally, methyl malvalate and methyl sterculate were separated from the remaining unsaturated fatty acid methyl esters, in particular methyl oleate and methyl linoleate, by preparative high-performance liquid chromatography on C₁₈ reversed-phase using acetonitrile isocratically. Methyl malvalate and methyl sterculate were obtained with purities of 95–97 and 95–98%, respectively.     

Reactivities towards the benzoyloxy radical of monomers with beta-methyl groups

Summary Polymers of methyl methacrylate have been prepared at 60°C with benzoyl peroxide as initiator in the presence of methyl tiglate (MT), methyl crotonate (MC) or crotononitrile (CNL); they have been examined for end-groups derived from the initiator. The introduction of beta-methyl groups into methyl methacrylate, methyl acrylate and acrylonitrile (to give MT, MC and CNL respectively) increases reactivity towards the benzoyloxy radical. The effects can be explained in terms of the electron-repelling methyl groups activating the double bonds for reaction with the electrophilic benzoyloxy radical.     

Thermal Decomposition of Some Acetoxyoctadecenoates and Acetoxyoctadecadienoates

The rates of the thermal decomposition (dehydroacetoxylation) and the activation energies of the following three samples have been determined: A) acetylated methyl ricinoleate; B) methyl ester mixture of vicinally unsaturated acetoxyoctadecenoates prepared by reacting methyl oleate and mercuric acetate in acetic acid; C) methyl ester mixture of vicinally unsaturated acetoxyoctadecadienoates prepared by reacting methyl linoleate and mercuric acetate in acetic acid. The thermal decomposition is shown to be a first-order reaction.     

Saturated keto esters from lesquerolic,dimorphecolic, and densipolic acids

Summary The naturally occurring, unsaturated, hydroxy fatty esters, methyl lesquerolate (methyl 14-hydroxy-cis-11-eicosenoate), methyl dimorphecolate (methyl 9-hydroxy-trans, trans-10,12-octadecadienoate), and methyl densipolate (methyl 12-hydroxy-cis,cis-9,15-octadecadienoate) have been converted to the corresponding saturated keto esters by tow routes. The unsaturated esters were subjected to a hydrogenation-dehydrogenation reaction in the presence of Raney nickel or their saturated derivatives were dehydrogenated by copper chromite catalysis. Yields of the keto esters are 65–82% in the nickel-catalyzed reactions, and 71–94% by copper chromite-catalyzed dehydrogenation. In the hydrogenation-dehydrogenation system the order of reactivity is: methyl lesquerolate>methyl dimorphecolate>methyl densipolate. Relationships between structure and reactivity of these compounds, methyl 12-hydroxystearate, and methyl ricinoleate are discussed. W. Utiliz. Res. Dev. Div., ARS, USDA.     

Differences in Oxidation Kinetics Between Conjugated and Non-Conjugated Methyl Linoleate

The oxidation kinetics of conjugated methyl linoleate was compared with that of non-conjugated methyl linoleate under mild oxidation conditions (30 °C in the dark). Samples of methyl 9-cis,11-trans-linoleate, methyl 10-trans,12-cis linoleate and methyl 9-cis,12-cis linoleate were assayed separately and in mixtures. For comparative purposes, methyl α-linolenate and methyl oleate were also used. Two complementary analytical approaches were selected to monitor the progress of oxidation, (1) the traditional follow-up of residual substrate by gas liquid chromatography, and (2) an analytical procedure by high-performance size-exclusion chromatography (HPSEC) for direct measurement of the oxidation compounds formed. The HPSEC method enabled us to quantitate oxidized monomers, dimers and polymers concomitantly in a rapid and direct analysis. Results showed that conjugated methyl linoleate samples oxidized later than their non-conjugated counterparts, and showed a very different oxidation pattern. Thus, formation of oxidized monomers was negligible and the first and major compounds formed were polymerization products. Also, under the conditions used, non-conjugated and conjugated methyl linoleate samples in 1:1 mixtures led to decreased oxidation rate of non-conjugated methyl linoleate and increased oxidation rate of conjugated methyl linoleate. This study supports the view that oxidation kinetics of conjugated dienes differ substantially from that of methylene-interrupted dienes.     

Preparation and Characterization of Poly(Methyl Methacrylate) Microbeads by Dispersion Polymerization: Effects of the Medium Composition,Monomer Concentration,Thermal, and Optical Properties

This study investigated the relationship between particle size, particle distribution, thermal, and optical properties of poly(methyl methacrylate) microbeads using dispersion polymerization under various methanol/water (MeOH/H₂O) dispersion medium ratios and methyl methacrylate acid concentrations. The particle size of the poly(methyl methacrylate) microbeads increased when the medium solubility and monomer concentration increased simultaneously. In addition, the molecular weight and polydispersity of the poly(methyl methacrylate) microbeads were increased as the methanol ratio increased. The refractive index increased as the content of the poly(methyl methacrylate) microbeads increased with wavelengths of 546 and 589 nm.     

Thermal properties of PMMA/TiO2 nanocomposites prepared by in-situ bulk polymerization

The surface of anatase TiO₂ nanoparticles, obtained by the controlled hydrolysis of titanium tetrachloride, was modified by 6-palmitate ascorbic acid. The surface modified TiO₂ nanoparticles were dispersed in methyl methacrylate and mixed with a appropriate amount of poly(methyl methacrylate) to obtain a syrup. The nanocomposite sheets were made by bulk polymerization of the syrup in a glass sandwich cell using 2,2′-azobisisobutyronitrile as initiator. The molar masses and molar mass distributions of synthesized poly(methyl methacrylate) samples were determined by gel permeation chromatography. The content of unreacted double bonds in synthesized samples was determined by ¹H NMR spectroscopy. The influence of TiO₂ nanoparticles on the thermal stability of the poly(methyl methacrylate) matrix was investigated using thermogravimetric analysis and differential scanning calorimetry. The synthesized samples of poly(methyl methacrylate) have different molar mass and polydispersity depending on the content of the surface modified TiO₂ nanoparticles. The values of glass transition temperature of so prepared nanocomposite samples were lower than for pure poly(methyl methacrylate), while the glass transition temperature of samples preheated in inert atmosphere was very similar to the glass transition temperature of pure poly(methyl methacrylate). The thermal stability of nanocomposite samples in nitrogen and air was different from thermal stability of pure poly(methyl methacrylate). POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers     

Hydrogen sulfide adducts of methyltrans,trans- 9,11-octadecadienoate

Hydrogen sulfide was added to methyltrans, trans- 9,11-octadecadienoate in benzene solution at 25 C with ultraviolet radiation. GC-MS and GLC analysis of the reaction product showed the presence of methyl oleate, methyl stearate, geometric isomers of methyl 9,11-octadecadienoate, methyl 9,12-epoxy-octadeca-9, 11-dienoate, an unknown compound with an apparent molecular weight of 306, methyl 8-(2′,5′-hexylthienyl) octanoate, an unidentified sul-fur ] containing C₁₈ ester with an apparent molecular weight of 326, methyl 9,12-epithiostearate, an adduct of methyltrans,trans- 9,11-octadecadienoate and ben-zene [bicyclo (4.4.0)-deca-2,5,7-triene-l-(Ω-carboxy-methyl heptyl)-4 hexyl] and a probable mixture of methyl 9,11-epidithiostearate, methyl 9,12-epidithio-stearate, and methyl 10,12-epidithiostearate.     

Oxidation reactions of acetylenic fatty esters with selenium dioxide/tert-butyl hydroperoxide

Reaction of methyl undec-10-ynoate (1) with selenium dioxide/tert-butyl hydroperoxide (TBHP) in aqueous dioxane gave methyl 9-oxo-undec-10-ynoate (2, 9%) and 9-hydroxy-undec-10-ynoate (3, 60%), while methyl octadec-9-ynoate (4) yielded mixtures of positional isomers of mono-keto (viz. methyl 8-oxo- and 11-oxo-octadec-9-ynoate, 5, 5%), hydroxy-keto (viz. methyl 8-hydroxy-11-oxo-and 11-hydroxy-8-oxo-octadec-9-ynoate, 6, 10%), and dihydroxy (viz. methyl 8,11-dihydroxy-octadec-9-ynoate, 7, 24%) derivatives. Similar treatment of a conjugated diacetylenic fatty ester (methyl octadeca-6,8-diynoate, 8) furnished a mixture of methyl 5-oxo-and 10-oxo-octadeca-6,8-diynoate (9, 12%) and a complex mixture of very polar products. Reaction of methyl octadec-11E-en-9-ynoate (methyl santalbate) (10) with selenium dioxide/TBHP in aqueous dioxane gave exclusively a mixture of regiospecific products, viz. methyl 8-oxo-octadec-11(E) Z-en-9-ynoate (11, 6%) and methyl 8-hydroxy-octadec-11 E-en-9-ynoate (12, 70%). The structures of the various products were determined by a combination of spectroscopic and mass spectral analyses.     

Coadsorption of Methyl Pyruvate and (±)-1-(1-Naphthyl)Ethylamine on Pt(111): Insights on the Mechanism for Asymmetric Hydrogenation

The results of a series of adsorption and coadsorption measurements using (±)-1-(1-naphthyl)ethylamine (NEA), methyl pyruvate, ester-deuterated methyl pyruvate, methyl naphthalene and 2,3-butanedione on Pt(111) are presented. Coadsorption of NEA stabilizes a molecularly adsorbed state of methyl pyruvate. The latter state undergoes thermal decomposition to yield a methane desorption peak centred at 320 K. Experiments performed using ester-deuterated methyl pyruvate show that the methane desorption results from the decomposition of the acetyl moiety of the α-ketoester. A stabilizing interaction is not observed for coadsorbed methyl naphthalene and methyl pyruvate, presumably due to the absence of an amine group. The study provides further evidence for the existence of a 1:1 methyl pyruvate-1-(1-naphthyl)ethylamine docking complex on Pt(111) under ultrahigh vacuum conditions.     

Increased amounts of cholesterol precursors in lipoproteins after ileal exclusion

Serum cholesterol precursor sterols reflect the activity of cholesterol synthesis. In this study, squalene, methyl sterol and lathosterol contents were studied in very low density lipoprotein (VLDL), low density lipoprotein (LDL) and high density lipoprotein (HDL) of heterozygous familial hypercholesterolemia patients without and with ileal bypass. The contents of lathosterol and all methyl sterols (lanosterol, Δ^8,24-dimethylsterol, Δ⁸-dimetylsterol, Δ⁸-methostenol and methostenol), but not of squalene were increased in all lipoproteins by ileal bypass. The increase in the free methyl sterols was more marked than that in the esterified ones. The percentage esterification of the methyl sterols was highest in HDL and lowest in VLDL. Lipoprotein methyl sterol contents were positively correlated with each other and with cholesterol synthesis. The methyl sterols were slightly concentrated in LDL, and squalene strongly concentrated in VLDL. It is concluded that long-term stimulation of cholesterol synthesis increases the methyl sterols in all lipoproteins.     

Synthesis of sulfur heterocycles from α,β-unsaturated carbonyl fatty acid esters

Alkyl chain substituted oxathiolanes from allylic oxo are described. Reaction of methyl 4-oxo-trans-2-hexadecenoate (1) with β-mercaptoethanol yields methyl 4-oxathiolane-trans-2-hexadecenoate (II), methyl 4-oxathiolane-2(3)-(S-β-mercaptoethyl acetate) hexadecanoate (III) and methyl 4-oxathiolane-2(3)-(S-β-mercaptoethanol)hexadecanoate (IV).     

Synthesis ofGEM-dibromocyclopropanoid fatty esters using phenyl (tribromomethyl) mercury

Thegem-dibromocyclopropanation of naturally occurring unsaturated hydroxy fatty esters, methyl ricinoleate (I) and methyl isoricinoleate (II), has been undertaken to provide compounds which might have potential utility. Phenyl(tribromomethyl)mercury reacts only with the carbon-carbon double bond of each substrate, leaving the OH group intact. The product, methyl 9,10-dibromomethylene-12-hydroxyoctadecanoate (III) and methyl 12,13-dibromomethylene-9-hydroxyoctadecanoate (IV), obtained from I and II, respectively, were characterized by elemental, infrared (IR) and nuclear magnetic resonance (NMR) analyses.     

New chain transfer agents for free radical polymerizations

The palmitoyl ester of N-hydroxypyridine-2-thione displayed useful chain transfer properties in free radical polymerizations of methyl methacrylate and styrene. Retardation, however, accompanied the lowering of molecular weight in methyl acrylate and vinyl acetate polymerizations. 4-Methyl-3-palmitoyloxythiazol-2(3H)-thione had good chain transfer activity with methyl methacrylate, styrene and methyl acrylate. Although benzyl thionobenzoate exhibited virtually ‘ideal’ behaviour (chain transfer constant C_x ～1) in styrene and methyl acrylate polymerizations, it was ineffective in lowering molecular weight of poly(methyl methacrylate). Severe retardation was observed with vinyl acetate. Addition-fragmentation pathways are postulated for chain transfer.