共查询到20条相似文献,搜索用时 62 毫秒
1.
2012年10月22日,甘肃省金昌市政府与贵州瓮福集团有限责任公司在贵阳签订了《项目投资协议书》。根据协议,瓮福集团将在金昌投资建设选矿扩能、磷酸扩能、5万t/a滴灌肥(工业MAP)、2万t/a磷酸二氢钾、20万t/a重钙/富钙/普钙/新型 相似文献
2.
瓮福磷酸装置是贵州瓮福磷肥厂80万t/a重钙项目的配套装置,能力为300kt/aP2O5,采用普利昂第四代湿法磷酸生产工艺,由日本三井造船株式会社提供基础工程设计和关键设备,五环化学工程公司承担详细设计。该装置于1999年2月建成投料试车,同年8月通过72h性能考核,2002年达标达产。这期间遇到的最大问题是腐蚀,尤其循环水系统的腐蚀,以下作简要介绍。1 循环水系统的工艺流程瓮福磷酸循环水有4台热水泵、4台冷水泵、2台真空泵、4台轴流风机,冷、热水泵均采用高位吸水,所以在启动时须开启真空泵灌泵。热水泵从700m3的热水池将热水打上凉水塔,… 相似文献
3.
2013年1月14日,由中国五环工程有限公司总承包建设的瓮福紫金磷铵项目10万t/a湿法净化磷酸装置一次化工投料试车成功。瓮福紫金磷酸磷铵项目10万t/a湿法净化磷酸装置是瓮福紫金磷酸磷铵项目的主要装置之一,装置采用处于世界 相似文献
4.
贵州瓮福矿肥结合项目是国家重点建设的原材料、支农特大项目 ,一期工程由年采选原矿 2 5 0万t的磷矿山项目和年产 80万t重过磷酸钙 (简称重钙 )项目组成。重钙厂的主要生产装置包括采用两转两吸工艺技术的 80万t/a硫酸装置及硫铁矿原料堆场、采用二水法湿法磷酸工艺技术的 30万t/a磷酸装置、采用料浆法工艺技术的 80万t/a重钙装置以及采用直接法工艺技术的 1.4万t/a氟化铝装置。经过专家反复论证和现场勘测 ,最后选定马场坪为重钙厂厂址。由于瓮福磷矿矿肥基地年运输量大 ,一期工程运入量约 98万t,运出量约 2 30万t。所以外部… 相似文献
5.
正达州瓮福蓝剑化工有限责任公司充分发挥区位及资源优势,依托瓮福达州磷硫天然气化工基地,在四川达州经济开发区建设8万t/a湿法净化磷酸联产磷酸盐项目,其中一期工程计划总投资8000万元,包括5万t/a食品级磷酸一铵、3万t/a食品级磷酸二铵、5万t/a食品级磷酸二氢钾、3万t/a食品级磷酸脲等多套装置。8万t/a湿法净化磷酸联产磷酸盐项目晶体磷酸一铵装置近日一次投料试车成功,顺利产出合格产品。该装置的顺利建 相似文献
6.
7.
贵州瓮福80万吨/年重钙装置改产DAP的技改及运行情况 总被引:1,自引:1,他引:0
介绍瓮福磷肥厂重钙装置改产磷铵 (DAP)时 ,对造粒机氨分布器、溜槽、旋风除尘器、产品筛分机等的技改情况。讨论瓮福磷肥厂及国内某 DAP生产厂造粒机主要参数与美国 TVA氨化造粒机设计推荐参数的对比 ,瓮福磷肥厂造粒物料圆度差、细粒较多 ,外观差、返料偏高的原因是 :物料停留时间短 (仅 1m in,TVA推荐值 2~ 7min) ;物料装载系数低 (5 %~ 2 % ,TVA 推荐值 2 0 %~ 30 % ) ;筒体内空气流速低 (0 . 82 m/ s,TVA 推荐值 1.2 2 m/ s)。 相似文献
8.
9.
料浆法富钙生产及其关键控制参数的研究 总被引:1,自引:0,他引:1
云南磷肥工业有限公司引进生产能力 4 0 0 kt/a重钙装置 ,根据市场对富钙产品的需求量较大 ,在保留生产重钙产品功能的同时 ,改产富钙。阐述选择料浆法工艺 ,不用混配法生产富钙的原因 ;富钙产品的质量指标 ;生产富钙对原料湿法磷酸、磷矿石关键组分的指标参数要求 ;原料消耗及矿酸配比参数的计算方法 ;反应及干燥关键控制参数 ;生产所获得的富钙产品质量〔w(P2 O5有效 )~ 33% ,w(P2 O5水 )~ 30 %〕。投入资金不到 2 0万元 ,顺利实现富钙生产 ,提高了公司经济效益 相似文献
10.
11.
乙烯酮(双乙烯酮)是十分重要的化工中间体,其下游产品较多。江苏某化工厂开发生产乙烯酮(双乙烯酮)下游产品三十多个,年生产规模三万多吨,是国内以乙烯酮(双乙烯酮)为中间体生产精细化学品的综合骨干企业。针对乙烯酮(双乙烯酮)下游产品废水特点,该厂结合企业实际,开展了产品优化,结构调整,清洁生产,资源循环利用,节水降耗等工作,从源头削减了污染物的生产。同时投资二千多万元新建预处理装置三套,6000m3/d废水生化处理装置一套,使全厂乙烯酮(双乙烯酮)下游产品的废水得到了有效的治理。 相似文献
12.
13.
14.
D. G. Gordeev L. F. Gudarenko M. V. Zhernokletov V. G. Kudel’kin M. A. Mochalov 《Combustion, Explosion, and Shock Waves》2008,44(2):177-189
A semi-empirical equation of state for metals is described. Its capabilities are demonstrated by the example of the equation
of state for aluminum. New experimental data are presented on the location of the isentrope of aluminum for unloading from
the state at p = 229.71 GPa on the shock adiabat to an aerogel (SiO2) of density 0.08 g/cm3.
__________
Translated from Fizika Goreniya i Vzryva, Vol. 44, No. 2, pp. 61–75, March–April, 2008. 相似文献
15.
The objective of the study was to explore the effect of the degree of deacetylation (DD) of the chitosan used on the degradation rate and rate constant during ultrasonic degradation. Chitin was extracted from red shrimp process waste. Four different DD chitosans were prepared from chitin by alkali deacetylation. Those chitosans were degraded by ultrasonic radiation to different molecular weights. Changes of the molecular weight were determined by light scattering, and data of molecular weight changes were used to calculate the degradation rate and rate constant. The results were as follows: The molecular weight of chitosans decreased with an increasing ultrasonication time. The curves of the molecular weight versus the ultrasonication time were broken at 1‐h treatment. The degradation rate and rate constant of sonolysis decreased with an increasing ultrasonication time. This may be because the chances of being attacked by the cavitation energy increased with an increasing molecular weight species and may be because smaller molecular weight species have shorter relaxation times and, thus, can alleviate the sonication stress easier. However, the degradation rate and rate constant of sonolysis increased with an increasing DD of the chitosan used. This may be because the flexibilitier molecules of higher DD chitosans are more susceptible to the shear force of elongation flow generated by the cavitation field or due to the bond energy difference of acetamido and β‐1,4‐glucoside linkage or hydrogen bonds. Breakage of the β‐1,4‐glucoside linkage will result in lower molecular weight and an increasing reaction rate and rate constant. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3526–3531, 2003 相似文献
16.
17.
Jorge Marcelo Romero Soledad Bustillo Hugo Enrique Ramirez Maisuls Nelly Lidia Jorge Manuel Eduardo Gómez Vara Eduardo Alberto Castro Alicia H. Jubert 《International journal of molecular sciences》2007,8(7):688-694
A thermochemical rather simple experimental technique is applied to determine the enthalpy of formation of Diperoxide of ciclohexanone. The study is complemented with suitable theoretical calculations at the semiempirical and ab initio levels. A particular satisfactory agreement between both ways is found for the ab initio calculation at the 6–311G basis This set level. Some possible extensions of the present procedure are pointed out. 相似文献
18.
19.
20.
塔设备改造选型的分析 总被引:2,自引:0,他引:2
就当前扩产增容中塔设备设计和改造时板式塔和填料塔的选型问题加以分析。在评述目前国内常用的几种塔板和新型填料之后,着重介绍一种新型塔板(导向梯形浮阀塔板)和一种新型填料(波环填料——乾隆帕克)。 相似文献