共查询到20条相似文献,搜索用时 125 毫秒
1.
为提高乙醇生产发酵强度,提出了同步汽提闪蒸乙醇发酵新过程。该过程集合了闪蒸发酵和汽提发酵的优点,在发酵的同时能更有效地在位分离乙醇,从而提高发酵强度。通过与普通发酵、闪蒸发酵、汽提发酵等过程进行间歇实验比较,同步闪蒸汽提发酵过程具有发酵强度高的优势;而且,采用耐高温酵母高温发酵、提高通气量、闪蒸罐的进料流速可进一步提高其发酵强度。该过程简单、高效,具有工业应用的潜力。 相似文献
2.
3.
4.
研究了发酵增效剂在阿维菌素发酵过程中对阿维菌素发酵效价的影响。试验结果表明,在发酵培养基中添加一定量的发酵增效剂了可改善菌丝的结球状态,增加菌丝浓度,刺激与糖代谢有关酶的活性,从而提高发酵效价,其中添加1.6×10-4的发酵增效剂,可使发酵效价提高幅度最大,达到6.64%。 相似文献
5.
6.
浓醪发酵技术被认是发展发酵工业有效途径之一,成熟醪中高乙醇含量不仅是一个重要的技术经济指标,也是体现发酵技术是否先进的重要标志。浓醪发酵具有高细胞密度、高产物浓度和高生产速率等特点,是发酵工业的发展目标和方向。浓醪发酵具有提高乙醇含量、降低能耗、节约用水及提高设备使用率等优势,有效降低生产成本,具有广泛的应用价值。浓醪分酵的工艺技术从发酵工艺不同分为先糖化后发酵工艺和同步糖化浓醪发酵工艺发酵工艺,从发酵醪注入发酵罐的方式不同,分为连续发酵、间歇发酵和半连续发酵。 相似文献
7.
8.
9.
10.
为了考察益生菌发酵真菌产水溶性多糖的最佳提取工艺,以猴头菇为原料,格氏乳杆菌为发酵菌株,以发酵猴头菇多糖提取率为指标,研究了发酵时间、发酵温度以及接菌量对发酵猴头菇多糖提取率的影响。本研究利用水提醇沉提取法,在单因素实验的基础上,采用响应面法对发酵条件进行了优化。结果表明,提取发酵猴头菇多糖的最佳条件为发酵温度为35℃,发酵时间为45.5h,接菌量为4.2%,此条件下多糖提取率为(6.39±1.27)%。本研究为提取发酵猴头菇多糖提供了理论依据。 相似文献
11.
Jamie E. Moscovitz Lauren M. Aleksunes 《International journal of molecular sciences》2013,14(12):23801-23827
The ultimate fate of drugs and chemicals in the body is largely regulated by hepatic uptake, metabolism, and excretion. The liver acquires the functional ability to metabolize and transport chemicals during the perinatal period of development. Research using livers from fetal and juvenile rodents and humans has begun to reveal the timing, key enzymes and transporters, and regulatory factors that are responsible for the establishment of hepatic phase I and II metabolism as well as transport. The majority of this research has been limited to relative mRNA and protein quantification. However, the recent utilization of novel technology, such as RNA-Sequencing, and the improved availability and refinement of functional activity assays, has begun to provide more definitive information regarding the extent of hepatic drug disposition in the developing fetus. The goals of this review are to provide an overview of the early regulation of the major phase I and II enzymes and transporters in rodent and human livers and to highlight potential mechanisms that control the ontogeny of chemical metabolism and excretion pathways. 相似文献
12.
将木质素作为一种有机颗粒填料添加到热塑性塑料中,可解决造纸黑液资源化利用、石油原料日渐紧张以及环境污染加剧等严峻问题。而木质素与热塑性塑料之间相容性直接影响木质素在塑料工业中的应用与发展。首先简要概述了木质素结构与性质和木质素/热塑性塑料复合材料的性能分析,然后系统地阐述国内外研究木质素/热塑性塑料复合材料界面增容方法及其原理;增容方法按添加相容剂、改性木质素和改性塑料进行归类,并对3种增容方法进行比较分析;接着综述了木质素复合材料中增容方法的交叉复合使用;最后对未来木质素/热塑性塑料复合材料界面增容的研究方向以及思路进行了展望。 相似文献
13.
2004~2005年国外塑料工业进展 总被引:1,自引:0,他引:1
中蓝晨光化工研究院《塑料工业》编辑部 《塑料工业》2006,34(3):1-26
收集了2004年7月-2005年6月国外塑料工业的相关资料,介绍了2004年~2005年国外塑料工业的发展情况。提供了世界几大区域塑料的产量、增长率及所占份额;美国、德国、日本、韩国、法国、比利时、印度、西班牙、中国台湾、加拿大、巴西、英国等国家和地区的不同树脂的产量及消费量;各国、各地区塑料原料的产量、进出口量、国内消费量和人均消费量;日本塑料原料的生产情况。按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、通用热固性树脂(酚醛、聚氨酯、不饱和树脂、环氧树脂)、特种工程塑料(聚苯硫醚、液晶聚合物、聚醚醚酮、聚砜)的品种顺序,对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。 相似文献
14.
民用工业中复合材料桁架的应用和发展 总被引:1,自引:0,他引:1
本文叙述了复合材料桁架的构造、分类和计算方法,突出了复合材料桁架的优越性能和在民用工业中的应用前景;在分析大量文献资料的基础上阐述复合材料桁架杆件的多种加工工艺,并比较不同截面形式对杆件性能的影响;探讨复合材料杆件的破坏机理和分析方法,介绍节点的类型和各自的特点,提出节点及连接部位存在的关键问题;根据国内外复合材料桁架的研究和应用现状,阐述了复合材料桁架的性能和不同的设计方法,总结归纳影响复合材料桁架性能的关键因素和设计中存在的一些问题,并提出改进杆件设计、节点设计和优化复合材料桁架的建议。 相似文献
15.
利用自主研发的Couette结蜡装置,对蜡含量相同的油样1(不含沥青质)和油样2[含0.75%(质量分数)沥青质]进行结蜡实验,并研究其结蜡层的分层现象和分层规律。通过对油样1和油样2结蜡表层和底层的宏观形貌、DSC放热、析蜡量、蜡晶微观形貌的分析发现:油样1结蜡层无明显分层现象,而油样2结蜡层分层现象明显,沥青质的加入导致了结蜡层的分层。与结蜡表层相比,油样2结蜡底层的析蜡点、蜡含量与沥青质含量显著升高,蜡晶形貌发展为致密的类球状大蜡晶。油样2结蜡表层沉积量随壁温的升高、油壁温差和转速的增大而减小;结蜡底层沉积量随壁温升高而减小,随油壁温差和转速的增大而增大;总的蜡沉积量随壁温的升高和转速的增大而减小,随油壁温差的增大先增大后减小。 相似文献
16.
生物质能源作为可再生能源的重要组成部分,其综合高效利用在能源替代与补充、保护生态环境等方面具有重要的战略意义。生物油是生物质通过热裂解技术获得的液体产物,具有能量密度较高、环境友好、可再生及可直接输送等优点,可替代传统化石燃料推广使用,解决日益严重的能源紧缺与环境污染等问题。生物质热解制油技术的开发与利用,已成为新世纪可持续能源研究领域的重要课题之一。总结了近年来生物质热解制油技术的主要研究进展,重点关注热解反应器、催化热解技术与生物油的提质利用方面的研究,介绍了碱金属、氧化物和分子筛3种生物质热解催化剂,以及乳化、催化加氢、催化裂解、催化酯化和重整制氢5种生物质提质方法,最后对生物质热解技术的现状及发展趋势进行了总结和概括。 相似文献
17.
We analyzed the behavioral responses of the ants Camponotus rufipes and Solenopsis geminata towards all instars of Dione junio and Abananote hylonome. We also analyzed ant behavior towards hexane extracts of larvae and extracts of the spines and neck glands of the fifth instars of both species and identified the chemical compounds present. Larvae of both species were repellent to ants from the first instar onward. Later instars survived ant attacks better than earlier instars. The spines and neck glands of the larvae influenced the behavior of C. rufipes. The chemical compounds contained in the hexane extracts of whole first and fifth instars and in the spines and neck glands of fifth instars were principally carboxylic acids and terpenes. Further bioassays confirmed the repellent effect of some of these acids toward ants. 相似文献
18.
[目的]探讨毒死蜱和联苯菊酯在室内外土壤中的消解动态,并预测2种农药作为土壤化学屏障防治白蚁的有效期。[方法]采用气相色谱法测定不同时期土壤中毒死蜱和联苯菊酯的残留量并采用土壤穿透法测定2种农药在土壤中的生物活性。[结果]毒死蜱在室内和室外的半衰期分别为51.3、39.5 d,联苯菊酯在室内和室外的半衰期分别为31.3、44.5 d。毒死蜱和联苯菊酯抗白蚁穿透的最低有效质量分数分别为6.15、5.78 mg/kg,并结合消解动态方程预测出毒死蜱和联苯菊酯作为土壤化学屏障中有效成分的有效期在室内分别为195、29.1 d,在室外则分别为158.4、56.1 d。[结论]得到的白蚁防治有效期结果较好,为白蚁的化学防治提供理论依据。 相似文献
19.
《Journal of Adhesion Science and Technology》2013,27(1):127-149
A review of the literature is presented for the hydrolysis of alkoxysilane esters and for the condensation of silanols in solution or with surfaces. Studies using mono-, di-, and trifunctional silane esters and silanols with different alkyl substituents are used to discuss the steric and electronic effects of alkyl substitution on the reaction rates and kinetics. The influences of acids, bases, pH, solvent, and temperature on the reaction kinetics are examined. Using these rate data, Taft equations and Bronsted plots are constructed and then used to discuss the mechanisms for acid and base-catalyzed hydrolysis of silane esters and condensation of silanols. Practical implications for using organofunctional silane esters and silanols in industrial applications are presented. 相似文献
20.
Technology and colour are viewed as interfaces between the environment, humans and human activity. Examples are provided of ways of facilitating and improving access to and use of colours by commercial users of colour coatings through improvements in the accuracy of measuring and displaying colour. By analogy, the task of providing effective interfaces within the coatings industry, between the coatings industry and the environment and between the coatings industry and the public and political domain are discussed. Examples of information shortfalls are cited to illustrate how distortions arise. Examples of more effective, integrated technological, organisational and political interfacing are culled from the author's experiences. 相似文献