Improved thermal properties of jute fiber‐reinforced polyethylene nanocomposites

The thermal behavior of chemically modified jute fiber‐reinforced polyethylene (PE) nanocomposites was investigated. Nanocomposites were prepared by hot press molding technique using different fiber loadings (5, 10, 15, and 20 wt%) for both treated and untreated fibers. Jute fibers were chemically modified with benzene diazonium salt to increase their compatibility with the PE matrix. Surface and thermal properties were subsequently characterized. Fourier transform infrared spectroscopy and scanning electron microscopy analysis were used to study the surface morphology. Thermogravimetric analysis (TGA) and differential scanning calorimetry were carried out for thermal characterization. Fourier transform infrared spectroscopy and scanning electron microscopy study showed interfacial interaction among jute fiber, PE, and nanoclay. It was observed that, at optimum fiber content (15 wt%), treated jute fiber‐reinforced composites showed better thermal properties compared with that of untreated ones and also that nanoclay‐incorporated composites showed enhanced higher thermal properties compared with those without nanoclay. POLYM. COMPOS., 38:1266–1272, 2017. © 2015 Society of Plastics Engineers     

Development of composites based on recycled polyethylene/sugarcane bagasse fibers

In this work, sugarcane bagasse fibers were used as filler in composites having recycled high‐density polyethylene (PEr) as matrix. Because of the poor interaction between fibers surface and the PEr, the surface of bagasse was chemically modified. This modification consists of washing with water at 80°C, a mercerization process using sodium hydroxide and acetylation reaction with acetic anhydride. The chemical modification was characterized by Fourier transform infrared–horizontal attenuated total reflectance (FTIR‐HATR) and ¹³C nuclear magnetic resonance spectroscopies (NMR), thermogravimetric analysis (TGA), and scanning electronic microscopy (SEM). The composites were prepared from modified and unmodified fibers into PEr matrix, containing 5, 10, and 20% (w/w) of fiber. The samples were processed by extrusion and molds were prepared by injection process in order to perform mechanical tests. These materials were analyzed by SEM, TGA, and the water uptake was evaluated. Also, their mechanical properties were analyzed. Morphological analysis indicated that the chemical modification of sugarcane bagasse increased the compatibility between matrix and reinforcement. Tensile, flexural, and impact tests showed that the mechanical properties of the composite were improved compared to PEr due to the presence of the fibers. POLYM. COMPOS., 35:768–774, 2014. © 2013 Society of Plastics Engineers     

Modification of oil palm empty fruit bunches with maleic anhydride: The effect on the tensile and dimensional stability properties of empty fruit bunch/polypropylene composites

Oil palm empty fruit bunch (EFB)‐filled polypropylene (PP) composites were produced. The EFB filler was chemically modified with maleic anhydride (MAH). The effects of the filler size and chemical modification of EFBs on the tensile and dimensional stability properties of EFB–PP composites were studied. The composites with MAH‐treated EFBs showed higher tensile strengths than those with untreated EFBs. This was attributed to the enhanced compatibility between the MAH‐treated EFBs and PP matrix, as shown in a scanning electron microscopy study. Fourier transform infrared analysis showed evidence of C?C and C?O bonds from MAH at 1630 and 1730 cm^?1, respectively. The MAH‐treated PP composites showed lower water absorption and thickness swelling than those with untreated EFBs. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 827–835, 2003     

Bamboo fiber polypropylene composites: Effect of fiber treatment and nano clay on mechanical and thermal properties

In the current study, bamboo fibers were modified with sodium meta‐periodate in order to improve the mechanical and thermal properties of the bamboo‐clay‐polypropylene (PP) composites. Both raw and treated bamboo fibers were used in the manufacturing of the composites. The mechanical and thermal properties of the composites from modified bamboo fibers were found to increase considerably compared with those of untreated fibers. Tensile strengths of (raw bamboo fiber)/PP, (raw bamboo fiber‐clay)/PP, and (treated bamboo fiber‐clay)/PP composites showed a decreasing trend with increasing fiber loadings. However, the values for the chemically modified (bamboo fiber)‐clay‐PP composite at all mixing ratios were found to be higher than that of the original PP. The scanning electron micrographs showed that interfacial bonding between the treated fiber‐clay and matrix has significantly improved. It was determined that better dispersion of the filler into matrix occurred on 5% clay addition and fiber treatment. J. VINYL ADDIT. TECHNOL., 21:253–258, 2015. © 2014 Society of Plastics Engineers     

Bamboo fiber reinforced polypropylene composites and their mechanical,thermal, and morphological properties

Short bamboo fiber reinforced polypropylene composites were prepared by incorporation of various loadings of chemically modified bamboo fibers. Maleic anhydride grafted polypropylene (MA‐g‐PP) was used as compatibilizer to improve fiber–matrix adhesion. The effects of bamboo fiber loading and modification of the resin on the physical, mechanical, thermal, and morphological properties of the bamboo reinforced modified PP composites were studied. Scanning electron microscopy studies of the composites were carried out on the interface and fractured surfaces. Thermogravimetric analysis and IR spectroscopy were also carried out. At 50% volume fraction of the extracted bamboo fiber in the composites, considerable increase in mechanical properties like impact, flexural, tensile, and thermal behavior like heat deflection temperature were observed. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Fabrication of acrylic modified coconut fiber reinforced polypropylene biocomposites: Study of mechanical,thermal, and erosion properties

Coconut shell fiber‐reinforced polypropylene (PP/CSP) biocomposites were prepared by using hand lay‐out technique with different fractions of the modified fibers. Before proceeding to fabrication method, fibers were made compatible by chemical modification with acrylic acid. The interaction of acrylic modified coconut shell fibers with PP matrix was studied by using Fourier transforms Infrared spectroscopy. The morphology of chemically modified coconut fibers and coconut shell fibers reinforced polypropylene biocomposites were studied by using field emission scanning electron microscope. Due to strong interfacial interaction between PP and CSP, mechanical properties were improved. It was found that the tensile strength, elongation at break and loss modulus, rigidity of PP bio‐composites were investigated as compared with that of virgin PP matrix. The thermal properties of the fabricated biocomposites were investigated by using thermogravimetric analysis. The semi‐ductile properties of the fabricated PP biohybrids were confirmed through erosion ring test. POLYM. COMPOS., 38:2852–2862, 2017. © 2015 Society of Plastics Engineers     

Dynamic mechanical analysis of oil palm microfibril‐reinforced acrylonitrile butadiene rubber composites

The dynamic mechanical properties of microfibers of oil palm‐reinforced acrylonitrile butadiene rubber (NBR) composites were investigated as a function of fiber content, temperature, treatment, and frequency. The storage modulus (E′) was found to increase with weight fraction of microfibrils due to the increased stiffness imparted by the strong adhesion between the polar matrix and the hydrophilic microfibrils. The damping properties were found to decrease with increase in fiber loading. As the fiber content increases, the damping nature of the composite decreases because of the increased stiffness imparted by the natural fibers. By steam explosion method (STEX), microfibrils are separated from fibers. Natural fibers were undergone treatment such as mercerization, benzoylation, and silane treatment. The NBR is modified by the addition of resorcinol‐hexa‐hydrated silica (HRH) bonding agent. Also dicumyl peroxide (DCP) is used as an alternating vulcanizing agent in the system. In the case of composites containing chemically modified fibers, storage modulus were found to increase. Cole–Cole analysis was made to study the phase behavior of the composite samples. Activation energy for the relaxation processes in different composites was calculated. Morphological studies using scanning electron microscopy of tensile fracture surfaces of treated and untreated composites indicated better fiber matrix/adhesion in the case of treated microfibril‐reinforced composites. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

Unsaturated polyester‐toughened epoxy composites: Effect of sisal fiber on thermal and dynamic mechanical properties

In the present study, the mechanical and thermal properties of sisal fiber‐reinforced unsaturated polyester (UP)‐toughened epoxy composites were investigated. The sisal fibers were chemically treated with alkali (NaOH) and silane solutions in order to improve the interfacial interaction between fibers and matrix. The chemical composition of resins and fibers was identified by using Fourier‐transform infrared spectroscopy. The UP‐toughened epoxy blends were obtained by mixing UP (5, 10, and 15 wt%) into the epoxy resin. The fiber‐reinforced composites were prepared by incorporating sisal fibers (10, 20, and 30 wt%) within the optimized UP‐toughened epoxy blend. Scanning electron microscopy was used to analyze the morphological changes of the fibers and the adhesion between the fibers and the UP‐toughened epoxy system. The results showed that the tensile and flexural strength of (alkali‐silane)‐treated fiber (30 wt%) ‐reinforced composites increased by 83% and 55%, respectively, as compared with that of UP‐toughened epoxy blend. Moreover, thermogravimetric analysis revealed that the (alkali‐silane)‐treated fiber and its composite exhibited higher thermal stability than the untreated and alkali‐treated fiber systems. An increase in storage modulus and glass transition temperature was observed for the UP‐toughened epoxy matrix on reinforcement with treated fibers. The water uptake behavior of both alkali and alkali‐silane‐treated fiber‐reinforced composites is found to be less as compared with the untreated fiber‐reinforced composite. J. VINYL ADDIT. TECHNOL., 23:188–199, 2017. © 2015 Society of Plastics Engineers     

Surface modification and physical properties of various UHMWPE‐fiber‐reinforced modified epoxy composites

Two surface modification methods—plasma surface treatment and chemical agent treatment—were used to investigate their effects on the surface properties of ultrahigh‐molecular‐weight polyethylene (UHMWPE) fibers. In the analyses, performed using electron spectroscopy for chemical analysis, changes in weight, and scanning electron microscope observations, demonstrated that the two fiber‐surface‐modified composites formed between UHMWPE fiber and epoxy matrix exhibited improved interfacial adhesion and slight improvements in tensile strengths, but notable decreases in elongation, relative to those properties of the composites reinforced with the untreated UHMWPE fibers. In addition, three kinds of epoxy resins—neat DGEBA, polyurethane‐crosslinked DGEBA, and BHHBP‐DGEBA—were used as resin matrices to examine the tensile and elongation properties of their UHMWPE fiber‐reinforced composites. From stress/strain measurements and scanning electron microscope observations, the resin matrix improved the tensile strength apparently, but did not affect the elongation. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 655–665, 2007     

Cellulose fiber‐reinforced polylactic acid

Polymer composites from polylactic acid (PLA) and two types of cellulose fibers obtained either by acid hydrolysis of microcrystalline cellulose (HMCC) or by mechanical disintegration of regenerated wood fibers (MF) were prepared and characterized. To enhance the compatibility of the cellulose fibers with PLA matrix, a surface treatment based on 3‐aminopropyltriethoxysilane (APS) was performed. The Fourier Transform Infrared (FTIR) spectroscopy was used to determine the chemical groups involved in the surface modification reaction. The silanization treatment resulted in different modifications on both types of cellulose fibers because of their different structural and morphological characteristics. The composites were prepared by incorporating 2.5% of the treated or untreated HMCC and MF into a PLA matrix using a melt‐compounding technique. An improved adhesion between the two phases of the composite materials was observed by scanning electron microscopy thanks to treatment. The dynamic mechanical thermal analyses showed that both untreated and silane treated fibers led to an improvement of the storage modulus of PLA in the glassy state. A higher enhancement of the storage modulus in the case of PLA/HMCC composites than the composites containing MF was obtained as a result of the high aspect ratio of these fibers which allows better matrix‐to‐filler stress transfer. Furthermore, the storage modulus of PLA composites was enhanced by silanization even at higher temperatures especially after thermal treatment. The cellulose fibers addition in PLA matrix modified significantly the relaxation phenomenon as observed in tan δ curves, emphasizing strongly modified molecular mobility of PLA macromolecules and crystallization changes. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers.     

Study on flax fiber toughened poly (lactic acid) composites

Poly (lactic acid) (PLA) is a renewable and biodegradable polymer with high modulus, high strength but low toughness. Blending PLA with plant fiber has been believed an available strategy to improve the toughness of PLA. PLA/Flax composites were fabricated by extrusion and injection molding processes. The flax fiber surfaces were modified before blending to improve the compatibility, and the chemical structures of both untreated and treated fiber were characterized by Fourier transform infrared spectroscopy. Results of mechanical test showed that the impact strength and elongation at break of PLA/Flax composites were remarkably higher than PLA. The impact fractures of PLA/Flax composites were also observed by scanning electron microscope. The results showed uniform dispersion of fibers in PLA matrix and good compatibility between treated fibers and PLA matrix. Moreover, it can be observed that crazing propagation was hindered by fibers and transcrystalline developed along fibers by polarized optical microscope. Differential scanning calorimetry analysis was carried out to study the crystallinity of PLA and it was found that incorporation of fiber improved the crystallinity of PLA. The toughening mechanism of PLA/Flax composites was discussed according to the results. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42573.     

Effects of fiber‐surface treatment on the properties of hybrid composites prepared from oil palm empty fruit bunch fibers,glass fibers,and recycled polypropylene

In this article, we report the effects of hybridization and fiber‐surface modification on the properties of hybrid composites prepared from recycled polypropylene (RPP), coupling agents, oil palm empty fruit bunch (EFB), and glass fibers through a twin‐screw extruder and an injection‐molding machine. The surface of the EFB fibers was modified with different concentrations (10–15 wt %) and temperatures (60–90°C) of alkali solutions. The structure and morphology of the fibers were observed with the help of Fourier transform infrared spectroscopy and scanning electron microscopy. Different types of composites were fabricated with untreated, alkali‐treated, and heat‐alkali‐treated fibers. Comparative analysis of the mechanical, structural, morphological, and thermal properties of the composites was carried out to reveal the effects of treatment and hybridization. The analysis results reveal that composites prepared from the alkali‐treated (in the presence of heat) fibers show improved mechanical, thermal, and morphological properties with a remarkably reduced water absorption. Additionally, the crystallinity of RPP also increased with the development of biaxial crystals. The improvement of various properties in relation to the structures and morphologies of the composites is discussed. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43049.     

Mechanical,thermal, and morphological properties of maleic anhydride‐g‐polypropylene compatibilized and chemically modified banana‐fiber‐reinforced polypropylene composites

Composites were prepared with chemically modified banana fibers in polypropylene (PP). The effects of 40‐mm fiber loading and resin modification on the physical, mechanical, thermal, and morphological properties of the composites were evaluated with scanning electron microscopy (SEM), thermogravimetric analysis (TGA), Infrared (IR) spectroscopy, and so on. Maleic anhydride grafted polypropylene (MA‐g‐PP) compatibilizer was used to improve the fiber‐matrix adhesion. SEM studies carried out on fractured specimens indicated poor dispersion in the unmodified fiber composites and improved adhesion and uniform dispersion in the treated composites. A fiber loading of 15 vol % in the treated composites was optimum, with maximum mechanical properties and thermal stability evident. The composite with 5% MA‐g‐PP concentration at a 15% fiber volume showed an 80% increase in impact strength, a 48% increase in flexural strength, a 125% increase in flexural modulus, a 33% increase in tensile strength, and an 82% increase in tensile modulus, whereas the heat deflection temperature increased by 18°C. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Enzyme‐mediated surface modification of jute and its influence on the properties of jute/epoxy composites

Surface modification of jute fibers is necessary to improve the adhesion and interfacial compatibility between fibers and resin matrix before using fibers in polymer composites. In this study, dodecyl gallate (DG) was enzymatically grafted onto the jute fiber by laccase to endow the fiber with hydrophobicity. A hand lay‐up technique was then adopted to prepare jute/epoxy composites. Contact angle and wetting time measurements showed that the surface hydrophobicity of the jute fabric was increased after the enzymatic graft modification. The water absorption and thickness swelling of the DG‐grafted jute fabric/epoxy composite were lower than those of the other composites. The tensile and dynamic mechanical properties of the jute/epoxy composites were enhanced by the surface modification. Scanning electron microscopy images revealed stronger fiber–matrix adhesion in composites with modified fibers. Therefore, the enzymatic graft modification increased the fiber–matrix interface area. The fiber–matrix adhesion was enhanced, and the mechanical properties of the composites were improved. POLYM. COMPOS., 38:1327–1334, 2017. © 2015 Society of Plastics Engineers     

Eucalyptus Kraft pulp fibers as an alternative reinforcement of silicone composites. I. Characterization and chemical modification of Eucalyptus fibers with organosilane coupling agent

In this study, bleached Eucalyptus fibers obtained by a Kraft pulping process were characterized prior to and after chemical modification with a silane coupling agent, vinyltriethoxysilane, for use as an alternative additive in composites based on silicone. The presence of a silane coating on the fiber surface was observed by infrared, energy dispersive, and X‐ray photoelectron spectroscopies. The morphology of the fibers was investigated by field emission scanning electron microscopy. The untreated fibers were ribbon‐shaped and had a rough surface, due to the presence of fibrils. The coating reaction conducted in ethanol gave rise to loose fibrils and a more rough surface compared with those of untreated fibers. A smoother surface was observed when fibers were modified in tetrahydrofuran. The surface topography of the fibers was also examined by atomic force microscopy. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2573–2579, 2002     

Influence of varying fiber lengths on mechanical,thermal, and morphological properties of MA‐g‐PP compatibilized and chemically modified short pineapple leaf fiber reinforced polypropylene composites

Environmentally benign, low cost and abundantly available short pineapple leaf fibers (PALF), found mostly in the Tropical rain forest climates are ideal materials for manufacture of thermoplastic polymer‐matrix composites. Here, mechanical and thermal properties of composites of maleic anhydride grafted polypropylene (MA‐g‐PP) and chemically modified short PALF are studied as a function of different fiber lengths at 10 vol % fibers loading with fiber orientation in the longitudinal direction. The effects of fiber lengths and fiber loading on the morphological properties are assessed via observations by scanning electron microscopy. Fiber length of 6 mm oriented longitudinally at 10 vol % fibers loading in PP is the optimum and recommended composition, where 73% increase in impact properties, 37% increase in the flexural modulus, 33% increase in flexural strength, and 14% increase in vicat softening temperature are observed. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Production of leather-like composites using short leather fibers. II. Mechanical characterization

Leather-like composites were prepared by addition of chemically modified short leather fibers (SLF) into a plasticized polyvinyl chloride (pPVC) matrix. The fibers were subjected to chemical modification by emulsion polymerization to achieve good interfacial adhesion between SLF and the pPVC matrix. The SLF with chemical modification were obtained from three different reaction conditions where these SLF have different percentages of grafted and deposited PMMA polymer onto the fiber surface. The incorporation of the SLF into the thermoplastic matrix was carried out using a torque-rheometer and the composites obtained were molded by compression. Tensile and tear mechanical tests were performed on composite samples, and the morphology of the fractured surfaces was analyzed using scanning electron microscopy (SEM). The results show that the incorporation by grafting of polymethyl metacrylate (PMMA) onto the fibers produced a significant improvement of their interfacial adhesion to pPVC, promoting the compatibilization between the fiber surface and matrix. The findings are discussed and interpreted in terms of enhanced adhesion at phase boundaries. Overall, the results confirm that it is possible to produce modified leather composites based on a pPVC matrix, which exhibit relatively high tensile strength, tear resistance and flexibility. These composites are very suitable candidate materials for applications in the footwear industry.     

Effective mechanical properties of polyvinylalcohol biocomposites with reinforcement of date palm leaf fibers

Polyvinylalcohol/date palm leaf fiber (PVA/DPL) biocomposites were prepared by the melt mixing fabrication technique with various proportions of fibers. DPL fibers were chemically modified with the purpose of improving the dispersion and better compatibility with PVA matrix. Different chemical processes of modification were adopted and the tensile strengths of both treated and untreated fibers were compared. It was noticed that the tensile strength of acrylic acid treated fiber was optimum in comparison to other methods. The interaction of DPL fibers with PVA matrix were studied by Fourier transforms infrared spectroscopy (FTIR). Field emission scanning electron microscope (FESEM) was used to study the morphology of biocomposites. The tensile strength, Young's modulus, elongation at break, flexural strength, and impact strength of PVA/DPL biocomposites were investigated and compared with that of virgin PVA matrix. It was found that the above properties were first increased with fiber loading and then decreased. The optimum properties were obtained at 28 wt% of DPL fiber. The storage modulus and tan delta values of PVA/DPL biocomposites were analyzed. The thermal properties of biocomposites were also studied through the results of thermogravimetric (TGA). POLYM. COMPOS., 34:959–966, 2013. © 2013 Society of Plastics Engineers     

Contribution of surface treatments by esterification and silanization in reinforcing the composites based on Pine cone and Spartium junceum flours and polypropylene

Pine cone and Spartium junceum are readily available cellulosic materials which can be used as reinforcements in thermoplastic-based composites. In the present study, flours issued from Pine cone (PCF) and Spartium junceum (SjF) were first chemically modified with maleic anhydride (MA) and silane. Then, neat and treated flours were incorporated into a polypropylene (PP) matrix and the properties of composites prepared without or with maleic anhydride-grafted-polypropylene (PP-g-MA), added as a compatibilizer, were compared. FTIR analysis proved the efficiency of the treatments in removing some non-cellulosic components and formation of ester linkages due to the reaction between MA and the flours hydroxyl groups. In the case of Silane-PCF, the bands observed around 1730?cm^?1 and 1241?cm^?1 disappeared, thus indicating that the silane treatment allowed the extraction of hemicellulose and lignin from the flour surface. X-rays diffraction results showed that the applied chemical treatments contributed in increasing the flours crystallinity index, which implies that by the removal of the amorphous material covering the fibers, the more crystalline cellulosic component of the fibers is exposed. The incorporation of PCF and SjF increased the composites crystallinity which emphasizes their significant role in heterogeneous nucleating of PP matrix. Additionally, the composites observation by electron microscopy revealed more intimate contact between the flours and PP matrix after surface modification which permitted the dissolution of impurities. As a result, treated PCF and SjF induced a significant increase in the composites resilience and decreased notably their water uptake aptitude relatively to the composites based on untreated flours.     

Study of jute fiber reinforced polyester composites by dynamic mechanical analysis

Cyanoethylation of jute fibers in the form of nonwoven fabric was studied, and these chemically modified fibers were used to make jute–polyester composites. The dynamic mechanical thermal properties of unsaturated polyester resin (cured) and composites of unmodified and chemically modified jute–polyester were studied by using a dynamic mechanical analyzer over a wide temperature range. The data suggest that the storage modulus and thermal transition temperature of the composites increased enormously due to cyanoethylation of fiber. An increase of the storage modulus of composites, prepared from chemically modified fiber, indicates its higher stiffness as compared to a composite prepared from unmodified fiber. It is also observed that incorporation of jute fiber (both unmodified and modified) with the unsaturated resin reduced the tan δ peak height remarkably. Composites prepared from cyanoethylated jute show better creep resistance at comparatively lower temperatures. On the contrary, a reversed phenomenon is observed at higher temperatures (120°C and above). Scanning electron micrographs of tensile fracture surfaces of unmodified and modified jute–polyester composites clearly demonstrate better fiber–matrix bonding in the case of the latter. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 1505–1513, 1999