Electrochemistry and electrocatalysis of hemoglobin on multi-walled carbon nanotubes modified carbon ionic liquid electrode with hydrophilic EMIMBF4 as modifier

The direct electrochemistry of hemoglobin (Hb) on multi-walled carbon nanotubes (MWCNTs) modified carbon ionic liquid electrode (CILE) was achieved in this paper. By using a hydrophilic ionic liquid 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIMBF₄) as the modifier, a new CILE was fabricated and further modified with MWCNTs to get the MWCNTs/CILE. Hb molecules were immobilized on the surface of MWCNTs/CILE with polyvinyl alcohol (PVA) film by a step-by-step method and the modified electrode was denoted as PVA/Hb/MWCNTs/CILE. UV-vis and FT-IR spectra indicated that Hb remained its native structure in the composite film. Cyclic voltammogram of PVA/Hb/MWCNTs/CILE showed a pair of well-defined and quasi-reversible redox peaks with the formal potential (E^0′) of −0.370 V (vs. SCE) in 0.1 mol/L pH 7.0 phosphate buffer solution (PBS), which was the characteristic of the Hb heme Fe^III/Fe^II redox couples. The redox peak currents increased linearly with the scan rate, indicating the direct electron transfer was a surface-controlled process. The electrochemical parameters of Hb in the film were calculated with the results of the electron transfer coefficient (α) and the apparent heterogeneous electron transfer rate constant (k_s) as 0.49 and 1.054 s⁻¹, respectively. The immobilized Hb in the PVA/MWCNTs composite film modified CILE showed excellent electrocatalytic activity to the reduction of trichloroacetic acid (TCA) and hydrogen peroxide. So the proposed electrode showed the potential application in the third generation reagentless biosensor.     

Separation and concentration effect of f-MWCNTs on electrocatalytic responses of ascorbic acid, dopamine and uric acid at f-MWCNTs incorporated with poly (neutral red) composite films

A novel conductive composite film containing functionalized multi-walled carbon nanotubes (f-MWCNTs) with poly (neutral red) (PNR) was synthesized on glassy carbon electrodes (GC) by potentiostatic method. The composite film exhibited promising electrocatalytic oxidation of mixture of biochemical compounds such as ascorbic acid (AA), dopamine (DA) and uric acid (UA) in pH 4.0 aqueous solutions. It was also produced on gold electrodes by using electrochemical quartz crystal microbalance technique, which revealed that the functional properties of composite film were enhanced because of the presence of both f-MWCNTs and PNR. The surface morphology of the polymer and composite film deposited on transparent semiconductor tin oxide electrodes were studied using scanning electron microscopy and atomic force microscopy. These two techniques showed that the PNR was fibrous and incorporated on f-MWCNTs. The electrocatalytic responses of neurotransmitters at composite films were measured using both cyclic voltammetry (CV) and differential pulse voltammetry (DPV). These experiments revealed that the difference in f-MWCNTs loading present in the composite film affected the electrocatalysis in such a way, that higher the loading showed an enhanced electrocatalytic activity. From further electrocatalysis studies, well separated voltammetric peaks were obtained at the composite film modified GC for AA, DA and UA with the peak separation of 0.17 V between AA-DA and 0.15 V between DA-UA. The sensitivity of the composite film towards AA, DA and UA in DPV technique was found to be 0.028, 0.146 and 0.084 μA μM⁻¹, respectively.     

A comparison of the electrocatalytic activities of ordered mesoporous carbons treated with either HNO3 or NaOH

Ordered mesoporous carbon (OMC) was treated with HNO₃ or NaOH. The two treated OMCs have many oxygen-containing functional groups. Those treated with HNO₃ have more acidic surface groups than those treated with NaOH. Nicotinamide adenine dinucleotide (NADH) and H₂O₂ were selected as marker molecules for the comparison of the electrocatalytic property of the OMCs. A comparison between the cyclic voltammograms shows that the oxidation peak potential of NADH is 0.614 V at a bare glassy carbon electrode (GCE), 0.205 V at OMC/GCE, 0.223 V at NaOH-treated OMC/GCE, and 0.0 V at HNO₃-treated OMC/GCE (vs. Ag/AgCl). The results indicate that the HNO₃-treated OMC/GCE exhibits the highest electrocatalytic activity for NADH oxidation. Thus, acidic groups rather than other oxygen-containing functional groups, play a very important role in the catalytic activity of OMC.     

Electrochemical, EIS and AFM characterisation of biosensors: Trioxysilane sol-gel encapsulated glucose oxidase with two different redox mediators

Sol-gel encapsulated glucose oxidase (GOx) enzyme electrodes based on carbon film resistors with chemically deposited copper hexacyanoferrate (CuHCF) or poly(neutral red) (PNR), made by electrochemical polymerisation, as redox mediator have been developed and characterised using cyclic voltammetry, electrochemical impedance spectroscopy and atomic force microscopy. The sol-gel was prepared using three different trioxysilanes: 3-aminopropyl-triethoxysilane (APTOS), 3-glycidoxypropyl-trimethoxysilane (GOPMOS) and methyltrimethoxysilane (MTMOS), without alcohol addition, and alcohol formed during the hydrolysis of the precursor compounds was removed. The best sensitivity, ∼60 nA mM⁻¹, for glucose and limit of detection (2-40 μM, depending on the sol-gel precursor) were obtained when PNR was used as a mediator, but the linear range (50-600 μM) was two to four times lower than that at CuHCF mediated biosensors, using an operating potential of +0.05 V at CuHCF or −0.25 V versus saturated calomel electrode (SCE) at PNR mediated electrodes. The stability of the sensor depended on the sol-gel morphology and was 2 months testing the biosensor every day, while the storability was at least 4 months in the case of GOPMOS, the sensors being kept in buffer at +4 °C.     

An electrochemical biosensor based on Nafion-ionic liquid and a myoglobin-modified carbon paste electrode

An electrochemical biosensor was constructed based on the immobilization of myoglobin (Mb) in a composite film of Nafion and hydrophobic ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (BMIMPF₆) for a modified carbon paste electrode (CPE). Direct electrochemistry of Mb in the Nafion-BMIMPF₆/CPE was achieved, confirmed by the appearance of a pair of well-defined redox peaks. The results indicate that Nafion-BMIMPF₆ composite film provided a suitable microenvironment to realize direct electron transfer between Mb and the electrode. The cathodic and anodic peak potentials were located at −0.351 V and −0.263 V (vs. SCE), with the apparent formal potential (Ep) of −0.307 V, which was characteristic of Mb Fe(III)/Fe(II) redox couples. The electrochemical behavior of Mb in the composite film was a surface-controlled quasi-reversible electrode process with one electron transfer and one proton transportation when the scan rate was smaller than 200 mV/s. Mb-modified electrode showed excellent electrocatalytic activity towards the reduction of trichloroacetic acid (TCA) in a linear concentration range from 2.0 × 10⁻⁴ mol/L to 1.1 × 10⁻² mol/L and with a detection limit of 1.6 × 10⁻⁵ mol/L (3σ). The proposed method would be valuable for the construction of a third-generation biosensor with cheap reagents and a simple procedure.     

Poly-phenothiazine derivative-modified glassy carbon electrode for NADH electrocatalytic oxidation

Electropolymerization of a new phenothiazine derivative (bis-phenothiazin-3-yl methane; BPhM) on glassy carbon (GC) electrode generates a conducting film of poly-BPhM, in stable contact with the electrode surface. The heterogeneous electron-transfer process corresponding to the modified electrode is characterized by a high rate constant (50.4 s⁻¹, pH 7). The GC/poly-BPhM electrode shows excellent electrocatalytic activity toward NADH oxidation. The rate constant for catalytic NADH oxidation, estimated from rotating disk electrode (RDE) measurements and extrapolated to zero concentration of NADH, was found to be 9.4 × 10⁴ M⁻¹ s⁻¹ (pH 7). The amperometric detection of NADH, at +200 mV vs. SCE, is described by the following electroanalytical parameters: a sensitivity of 1.82 mA M⁻¹, a detection limit of 2 μM and a linear domain up to 0.1 mM NADH.     

A laccase-glucose oxidase biofuel cell prototype operating in a physiological buffer

Here we report on the design and study of a biofuel cell consisting of a glucose oxidase-based anode (Aspergillus niger) and a laccase-based cathode (Trametes versicolor) using osmium-based redox polymers as mediators of the biocatalysts’ electron transfer at graphite electrode surfaces. The graphite electrodes of the device are modified with the deposition and immobilization of the appropriate enzyme and the osmium redox polymer mediator. A redox polymer [Os(4,4′-diamino-2,2′bipyridine)₂(poly{N-vinylimidazole})-(poly{N-vinylimidazole})₉Cl]Cl (E⁰′ = −0.110 V versus Ag/AgCl) of moderately low redox potential is used for the glucose oxidizing anode and a redox polymer [Os(phenanthroline)₂(poly{N-vinylimidazole})₂-(poly{N-vinylimidazole})₈]Cl₂ (E⁰′ = 0.49 V versus Ag/AgCl) of moderately high redox potential is used at the dioxygen reducing cathode. The enzyme and redox polymer are cross-linked with polyoxyethylene bis(glycidyl ether). The working biofuel cell was studied under air at 37 °C in a 0.1 M phosphate buffer solution of pH range 4.4-7.4, containing 0.1 M sodium chloride and 10 mM glucose. Under physiological conditions (pH 7.4) maximum power density, evaluated from the geometric area of the electrode, reached 16 μW/cm² at a cell voltage of 0.25 V. At lower pH values maximum power density was 40 μW/cm² at 0.4 V (pH 5.5) and 10 μW/cm² at 0.3 V (pH 4.4).     

Electrooxidation of sulfide by cobalt pentacyanonitrosylferrate film on glassy carbon electrode by cyclic voltammetry

A glassy carbon (GC) electrode was modified with cobalt pentacyanonitrosylferrate (CoPCNF) film. Cyclic voltammetry (CV) of the CoPCNF onto the GC (CoPCNF/GC) shows a redox couple (Fe^III/Fe^II) with a standard potential (E^0′) of 580 mV. The current ratio I_pa/I_pc remains almost 1, and a peak separation (ΔE_p) of 106 mV is observed in 0.5 M KNO₃ as the supporting electrolyte. Anodic peak currents were found to be linearly proportional to the scan rate between 10 and 200 mV s⁻¹, indicating an adsorption-controlled process. The redox couple of the CoPCNF film presents an electrocatalytic response to sulfide in aqueous solution. The analytical curve was linear in the concentration range of 7.5 × 10⁻⁵ to 7.7 × 10⁻⁴ M with a detection limit of 4.6 × 10⁻⁵ M for sulfide ions in 0.5 M KNO₃ solution.     

Study on the electrochemical behaviour of the anticancer herbal drug emodin

The electrochemical behaviour of the anticancer herbal drug emodin was investigated by cyclic voltammetry (CV) at glassy carbon electrode. In 0.05 M NH₃-NH₄Cl (50% ethanol, pH 7.2) buffer solution, a pair of quasi-reversible redox peaks at potentials of Ep1 = −0.688 V and Ep2 = −0.628 V and one irreversible anodic peak, which was a typical anodic peak of emodin, at Ep3 = −0.235 V appeared at a scan rate of 100 mV/s. The irreversible anodic peak currents are linearly related to the emodin concentrations in a range from 8.9 × 10⁻⁸ M to 7.8 × 10⁻⁶ M with a pre-concentration time of 80 s under −0.620 V. Using the established method without pretreatment and pre-separation, emodin in herbal drug was determined with satisfactory results. Moreover, the electrode process dynamics parameters were also investigated by electrochemical techniques.     

Hydrophilic carbon nanoparticle-laccase thin film electrode for mediatorless dioxygen reduction: SECM activity mapping and application in zinc-dioxygen battery

Laccase from Cerrena unicolor was adsorbed on hydrophilic carbon nanoparticles (diameter = ca. 7.8 nm) modified with phenyl sulfonate groups and immobilized on an ITO electrode surface in a sol-gel processed silicate film. As shown by scanning electron and atomic force microscopies, the nanoparticles are evenly distributed on the electrode surface forming small aggregates of tens of nanometers in size. The mediator-free electrode exhibits significant and pH-dependent electrocatalytic activity towards dioxygen reduction. The maximum catalytic current density (95 μA cm⁻²) is obtained at pH 4.8 corresponding to maximum activity of the enzyme. Under these conditions dioxygen electroreduction commences at 0.575 V vs. Ag|AgCl_sat, a value close to the formal potential of the T1 redox centre of the laccase. The scanning electrochemical microscopy images obtained in redox competition mode exploiting mediatorless electrocatalysis show that the laccase is evenly distributed in the composite film. The obtained electrode was applied as biocathode in a zinc-dioxygen battery operating in 0.1 M McIlvaine buffer (pH 4.8). It provides 1.48 V at open circuit and a maximum power density 17.4 μW cm⁻² at 0.7 V.     

Studies on electrochemical properties of MWNTs-Nafion composite films based on the redox behavior of incorporated Eu by voltammetry and electrochemical impedance spectroscopy

MWNTs can be conveniently dispersed in Nafion solution on the basis of the special interactions between the sidewall of MWNTs and the hydrophobic domains of Nafion. Casting of the resulting mixture on electrode surfaces produced uniform composite films having wide electroanalytical applications. In this work, the electrochemical properties of the MWNTs-Nafion composite film on a glassy carbon electrode were systematically investigated by various electrochemical methods using incorporated europium(III) ions (Eu³⁺) as the probe. The voltammetric studies showed that the increase of MWNTs concentration in the composite film could effectively improve the redox currents of Eu³⁺ and reduce the peak separation, whereas the increase of Nafion concentration generally increased both the redox currents and the peak separation. These results suggested the different roles of MWNTs and Nafion in the composite films. The electrochemical impedance spectroscopic (EIS) investigations showed that MWNTs mainly contributed to the charge transfer and mass transfer processes of the composite film through the increases of the electrode/electrolyte interfacial area and the film porosity while Nafion generally dominated the mass transport from the solution into the film via ion exchange. The potential application of the sensitive response of Eu³⁺ at the MWNTs-Nafion composite film in electroanalytical chemistry was evaluated. In the range of 0.04-100 μM, the concentration of Eu³⁺ showed excellent linear relationships with the differential pulse voltammetric response with a low detection limit of 10 nM (S/N = 3) for 60 s accumulation at −0.1 V.     

Hemoglobin immobilized on whisker-like carbon composites and its direct electrochemistry

We developed a novel mesoporous carbon/whisker-like carbon (MCWC) composite which can promote the direct electron transfer of hemoglobin (Hb) immobilized on its surface. The cyclic voltammetric results showed that Hb immobilized on the surface of the MCWC composite could undergo a direct quasi-reversible electrochemical reaction. Its formal redox potential, E^0′ is −0.313 V in the phosphate buffer solution (pH 6.9) at a scan rate of 200 mV/s and is almost independent of the scan rate in the range of 100-600 mV/s. The dependence of E^0′ on the pH of phosphate buffer solution indicated that the redox reaction of Hb includes a one-electron-transfer reaction process coupled with one-proton-transfer. The experiment obtained larger value of electron transfer rate constant, k_s, than that of Hb immobilized on other carriers reported previously due to its special structure of loosely packed nanometer-scale carbon whiskers and thus formed “V-type” nano-pores. Furthermore, Hb immobilized on the surface of the MCWC composite can retain the stable bioelectrocatalytic activity for the reduction of H₂O₂.     

Immobilization, direct electrochemistry and electrocatalysis of hemoglobin on colloidal silver nanoparticles-chitosan film

This paper reports on the fabrication and characterization of hemoglobin (Hb)-colloidal silver nanoparticles (CSNs)-chitosan film on the glassy carbon electrode and its application on electrochemical biosensing. CSNs could greatly enhance the electron transfer reactivity of Hb as a bridge. In the phosphate buffer solution with pH value of 7.0, Hb showed a pair of well-defined redox peaks with the formal potential (E^0′) of −0.325 V (vs. SCE). The immobilized Hb in the film maintained its biological activity, showing a surface-controlled process with the heterogeneous electron transfer rate constant (k_s) of 1.83 s⁻¹ and displayed the same features of a peroxidase in the electrocatalytic reduction of oxygen and hydrogen peroxide (H₂O₂). The linear range for the determination of H₂O₂ was from 0.75 μM to 0.216 mM with a detection limit of 0.5 μM (S/N = 3). Such a simple assemble method could offer a promising platform for further study on the direct electrochemistry of other redox proteins and the development of the third-generation electrochemical biosensors.     

The mediation reaction between the external couple Ferri/Ferrocyanide and Os(II) bipyridile poly-vinylpyridile films coated onto glassy carbon electrodes

The oxidation-reduction of the Ferri/Ferrocyanide couple in solution onto modified glassy carbon Rotating Disk Electrodes (RDE) covered by Os(II) bipyridile poly-vinylpyridile (OsBPP) polymer was studied at room temperature. Steady state polarization curves were carried out as a function of the rotation speed, the polymer thickness and the concentration of redox centers within the polymer. This system has the characteristic that the formal redox potentials of both the external redox couple (E⁰′(Fe(CN)₆^3−/4−) = + 0.225 V vs. SCE) and the mediator polymer (E⁰′(OsBPP) = 0.260 V vs. SCE) lie very close. It is demonstrated that diffusion of the Ferri/Ferrocyanide inside the polymer can be ruled out. Since the processes of charge transfer at the metal/polymer and the mediating reaction are fast, the experimental results can be interpreted in terms of a kinetics in which the charge transport in the polymer or the diffusion in the solution may be the rate determining step, according to the experimental conditions. A simple model is considered that allows interpreting the experimental results quantitatively. Application of this model allows the determination of the diffusion coefficient of the electrons within the film, D_e ≈ 10⁻¹⁰ cm² s⁻¹.     

Redox poly[Ni(saldMp)] modified activated carbon electrode in electrochemical supercapacitors

The complex (2,2-dimethyl-1,3-propanediaminebis(salicylideneaminato))-nickel(II), [Ni(saldMp)], was oxidatively electropolymerized on activated carbon (AC) electrode in acetonitrile solution. The poly[Ni(saldMp)] presented an incomplete coated film on the surface of carbon particles of AC electrode by field emission scanning electron microscopy. The electrochemical behaviors of poly[Ni(saldMp)] modified activated carbon (PAC) electrode were evaluated in different potential ranges by cyclic voltammetry. Counterions and solvent swelling mainly occurred up to 0.6 V for PAC electrode by the comparison of D^1/2C values calculated from chronoamperometry experiments. Both the Ohmic resistance and Faraday resistance of PAC electrode gradually approached to those of AC electrode when its potential was ranging from 1.2 V to 0.0 V. Galvanostatic charge/discharge experiments indicated that both the specific capacitance and energy density were effectively improved by the reversible redox reaction of poly[Ni(saldMp)] film under the high current density up to 10 mA cm⁻² for AC electrode. The specific capacitance of PAC electrode decreased during the first 50 cycles but thereafter it remained constant for the next 200 cycles. This study showed the redox polymer may be an attractive material in supercapacitors.     

Synthesis and electrochemical characterization of bis(3,4-ethylene-dioxythiophene)-(4,4′-dinonyl-2,2′-bithiazole) comonomer

The synthesis and characterization of a novel donor acceptor donor type bis(3,4-ethylene-dioxythiophene)-(4,4′-dinonyl-2,2′-bithiazole) comonomer and its electrochemically prepared polymer on carbon fiber, Pt button and ITO plate is reported in this paper. Cyclic voltammetry of the polymer in 0.1 M Et₄NBF₄/CH₂Cl₂ exhibits a very well defined and reversible redox processes and this co-monomer can be either p-doped or n-doped. The half-wave oxidation potentials of the polymer (E_1/2) were observed at 0.303 and 0.814 V versus Ag/AgCl. The polymer is electrochromic; the onset for the π-π^* transition (E_g) of 1.75 eV with a λ_max at 2.15 eV and the homogeneous and high quality film of the polymer is stable of its optical properties offering fast switching time which is less than 0.25 s. The morphological studies reveal that the polymer was deposited as a continuous and very well adhering film to surface of the carbon fiber microelectrode. All these properties make this polymer favorable for use in electronic devices.     

An electrochemical DNA biosensor developed on novel multinuclear nickel(II) salicylaldimine metallodendrimer platform

An electrochemical DNA biosensor (EDB) was prepared using an oligonucleotide of 21 bases with sequence NH₂-5′-GAGGAGTTGGGGGAGCACATT-3′ (probe DNA) immobilized on a novel multinuclear nickel(II) salicylaldimine metallodendrimer on glassy carbon electrode (GCE). The metallodendrimer was synthesized from amino functionalized polypropylene imine dendrimer, DAB-(NH₂)₈. The EDB was prepared by depositing probe DNA on a dendrimer-modified GCE surface and left to immobilize for 1 h. Voltammetric and electrochemical impedance spectroscopic (EIS) studies were carried out to characterize the novel metallodendrimer, the EDB and its hybridization response in PBS using [Fe(CN)₆]^3−/4− as a redox probe at pH 7.2. The metallodendrimer was electroactive in PBS with two reversible redox couples at E°′ = +200 mV and E°′ = +434 mV; catalytic by reducing the E_pa of [Fe(CN)₆]^3−/4− by 22 mV; conducting and has diffusion coefficient of 8.597 × 10⁻⁸ cm² s⁻¹. From the EIS circuit fitting results, the EDB responded to 5 nM target DNA by exhibiting a decrease in charge transfer resistance (R_ct) in PBS and increase in R_ct in [Fe(CN)₆]^3−/4− redox probe; while in voltammetry, increase in peak anodic current was observed in PBS after hybridization, thus giving the EDB a dual probe advantage.     

Immobilization of Nafion-ordered mesoporous carbon on a glassy carbon electrode: Application to the detection of epinephrine

A stable suspension of ordered mesoporous carbon (OMC) was obtained by dispersing OMC in a solution of Nafion. By coating the suspension onto glassy carbon (GC) electrode, cyclic voltammetry was used to evaluate the electrochemical behaviors of Nafion-OMC-modified GC (Nafion-OMC/GC) electrode in 0.1 mmol L⁻¹ hexaammineruthenium(III) chloride (Ru(NH₃)₆Cl₃)/0.1 mol L⁻¹ KCl solution, where Nafion-OMC/GC electrode shows a faster electron transfer rate as compared with OMC/GC, Nafion/GC and GC electrodes. Due to the unique properties of Nafion-OMC, an obvious decrease in the overvoltage of the epinephrine (EP) oxidation (ca. 100 mV at pH 4.1 and 115 mV at pH 7.0) as well as a dramatic increase in the peak current (12 times at pH 4.1 and 6 times at pH 7.0) was observed at Nafion-OMC/GC electrode compared to that seen at GC electrode. By combining the advantages of OMC with those of Nafion, the anodic peak of EP and that of ascorbic acid (AA) were separated successfully (by ca. 144-270 mV) in the pH range of 2.0-10.0, which may make Nafion-OMC/GC electrode potential for selective determination of EP in the presence of AA at a broad pH range. As an EP sensor, the EP amperometric response at Nafion-OMC/GC electrode in pH 7.0 PBS is extremely stable, with 99% of the initial activity remaining (compared to 32% at GC surface) after 120 min stirring of 0.20 mmol L⁻¹ EP. And Nafion-OMC/GC electrode can be used to readily detect the physiological concentration of EP at pH 7.0. These make Nafion-OMC/GC electrode potential candidates for stable and efficient electrochemical sensor for the detection of EP. The solubilization of OMC by Nafion may provide a route to more precise manipulation, and functionalization for the construction of OMC-based sensors, as well as allowing OMC to be introduced to biologically relevant systems.     

A stability comparison of redox-active layers produced by chemical coupling of an osmium redox complex to pre-functionalized gold and carbon electrodes

The production of stable redox active layers on electrode surfaces is a key factor for the development of practical electronic and electrochemical devices. Here, we report on a comparison of the stability of redox layers formed by covalently coupling an osmium redox complex to pre-functionalized gold and graphite electrode surfaces. Pre-treatment of gold and graphite electrodes to provide surface carboxylic acid groups is achieved via classical thiolate self-assembled monolayer formation on gold surfaces and the electro-reduction of an in situ generated aryldiazonium salt from 4-aminobenzoic acid on gold, glassy carbon and graphite surfaces. These surfaces have been characterized by AFM and electrochemical blocking studies. The surface carboxylate is then used to tether an osmium complex, [Os(2,2′-bipyridyl)₂(4-aminomethylpyridine)Cl]PF₆, to provide a covalently bound redox active layer, E^0′ of 0.29 V (vs. Ag/AgCl in phosphate buffer, pH 7.4), on the pre-treated electrodes. The aryldiazonium salt-treated carbon-based surfaces showed the greatest stability, represented by a decrease of <5% in the peak current for the Os(II/III) redox transition of the immobilized complex over a 3-day period, compared to a decrease of 19% and 14% for the aryldiazonium salt treated and thiolate treated gold surfaces, respectively, over the same period.     

Direct electrochemistry and biocatalytic activity of hemoglobin entrapped into gellan gum and room temperature ionic liquid composite system

A new composite film of microbial exocellular polysaccharide-gellan gum (GG) and room temperature ionic liquid (IL) 1-butyl-3-methyl-imidazolium hexafluorophosphate (BMIMPF₆) was firstly used as an immobilization matrix to entrap proteins and its bioelectrochemical properties were studied. Hemoglobin (Hb) was chosen as a model protein to investigate the composite system. UV-vis spectroscopy, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were used to characterize the composite film. The obtained results demonstrated that the Hb molecule in the film kept its native structure and showed its good electrochemical behavior. A pair of well-defined, quasi-reversible cyclic voltammetric peaks appeared in pH 7.0 phosphate buffer solutions (PBS, 0.1 M), with the formal potential (E°′) of −0.368 V (vs. SCE), which was the characteristic of Hb Fe(III)/Fe(II) redox couples. The Hb-IL-GG-modified electrode also showed an excellent electrocatalytic behavior to the reduction of hydrogen peroxide (H₂O₂). Therefore, this kind of composite film as a novel substrate offers an efficient strategy and a new promising platform for further study on the direct electrochemistry of redox proteins and the development of the third-generation electrochemical biosensors.