New Cu(I) complexes with biquinolyl-containing polymer ligands as electrocatalysts for O2 activation in the oxidation of alcohols

Electrochemical approach to a new electroactive catalytic system based on polyamic acids with biquinolyl (biQ) fragments in the polymer backbone capable of coordination to Cu(I)-ions was elaborated using sacrificial Cu anode. The redox properties of the resultant Cu(I) polymer complex were characterized by voltammetric methods. Polynuclear Cu(I) complex with only one biQ ligand per Cu(I) center showed high oxidase activity in air oxidation of aliphatic and aromatic alcohols to corresponding carbonyl derivatives with concomitant reduction of molecular oxygen to water. The reactions proceed in acetonitrile or N-methylpyrrolidone at a potential of Cu^II/Cu^I electroreduction (−0.55 V versus Ag/AgCl/KCl) with the high preparative yield and current efficiency. The electrocatalytic efficiency is enhanced when the Cu-containing polymer is immobilized on the graphite surface. The stoichiometric composition of the adsorbed polymer complex was determined by means of coulometric assays of the quantities of electroactive biQ fragments and Cu(I) present on the surface. The possibility of the obtained redox-active macromolecules to mimic the active site of certain copper-containing enzymes capable of reversible binding and activation of dioxygen is discussed, providing some insight into the mechanism of the catalytic process.     

Synthesis and electrochemical characterization of bis(3,4-ethylene-dioxythiophene)-(4,4′-dinonyl-2,2′-bithiazole) comonomer

The synthesis and characterization of a novel donor acceptor donor type bis(3,4-ethylene-dioxythiophene)-(4,4′-dinonyl-2,2′-bithiazole) comonomer and its electrochemically prepared polymer on carbon fiber, Pt button and ITO plate is reported in this paper. Cyclic voltammetry of the polymer in 0.1 M Et₄NBF₄/CH₂Cl₂ exhibits a very well defined and reversible redox processes and this co-monomer can be either p-doped or n-doped. The half-wave oxidation potentials of the polymer (E_1/2) were observed at 0.303 and 0.814 V versus Ag/AgCl. The polymer is electrochromic; the onset for the π-π^* transition (E_g) of 1.75 eV with a λ_max at 2.15 eV and the homogeneous and high quality film of the polymer is stable of its optical properties offering fast switching time which is less than 0.25 s. The morphological studies reveal that the polymer was deposited as a continuous and very well adhering film to surface of the carbon fiber microelectrode. All these properties make this polymer favorable for use in electronic devices.     

Synthesis and characterization of soluble poly(ether imide)s based on 2,2′-bis(4-aminophenoxy)-9,9′-spirobifluorene

A series of aromatic poly(ether imide)s containing 9,9′-spirobifluorene moieties in the main chain have been synthesized via the polycondensation of 2,2′-bis(4-aminophenoxy)-9,9′-spirobifluorene with a variety of aromatic dianhydrides. In the diamine monomer, the two aminophenoxyfluorene entities are orthogonally arranged and are connected through an sp³ carbon atom (the spiro center). The resulting poly(ether imide)s have a polymer backbone which is periodically twisted with an angle of 90° at each spiro center. This structural feature, which restricts the close packing of the polymer chains and reduces inter-chain interactions, leads to amorphous poly(ether imide)s with good solubility in common organic solvents. In addition, the rigidity of the main chain of these polymers appears to be preserved due to the spiro-structure. As a result, these poly(ether imide)s exhibit a high T_g and excellent thermal stability.     

The influence of 2,2′-dipyridyl on non-formaldehyde electroless copper plating

High electroless copper deposition rates can be achieved using hypophosphite as the reducing agent. However, the high deposition rate also results in dark deposits. In the hypophosphite baths, nickel ions (0.0057 M with Ni²⁺/Cu²⁺ mole ratio 0.14) were used to catalyze hypophosphite oxidation. In this study, additives (e.g. 2,2′-dipyridyl) were investigated to improve the microstructure and properties of the copper deposits in the hypophosphite (non-formaldehyde) baths. The influence of 2,2′-dipyridyl on the deposit composition, structure, properties, and the electrochemical reactions of hypophosphite (oxidation) and cupric ion (reduction) have been investigated. The electroless deposition rate decreased with the addition of 2,2′-dipyridyl to the plating solution and the color of the deposits changed from dark brown to a semi-bright with improved uniformity. The deposits also had smaller crystallite size and higher (1 1 1) plane orientation with the use of 2,2′-dipyridyl. The resistivity and nickel content of the deposit were not affected by 2,2′-dipyridyl additions to the bath. The electrochemical current-voltage results show that 2,2′-dipyridyl inhibits the catalytic oxidation of hypophosphite at the active nickel site. This results in a more negative electroless deposition potential and lower deposition rate.     

Effect of nitrobenzene on initiator-fragment incorporation radical polymerization of divinylbenzene with dimethyl 2,2′-azobisisobutyrate

The polymerization of divinylbenzene (DVB) with dimethyl 2,2′-azobisisobutyrate (MAIB) was conducted at 70 and 80 °C in benzene in the presence of nitrobenzene (NB) as a retarder. When the concentrations of DVB, MAIB, and NB were 0.45, 0.50, and 0.50 mol/l, respectively, the polymerization proceeded without any gelation to yield soluble polymers. The polymer yield (up to 65%) and the molecular weight (M_n=1.5-4.2×l0⁴ at 70 °C and 1.3-3.9×l0⁴ at 80 °C) increased with time. The polymer formed in the polymerization at 80 °C for 4 h consisted of the DVB units with (4 mol%) and without double bond (41 mol%), methoxycarbonylpropyl group as MAIB-fragment (48 mol%), and NB unit (7 mol%). Incorporation of such a large number of the initiator-fragments as terminal groups in a polymer molecule indicates that the polymer is of a hyperbranched structure. The polymer showed an upper critical solution temperature (40 °C on cooling) in an acetone-water [14:1 (v/v)] mixture. The results of MALLS and viscometric measurements and TEM observation supported that the polymers formed in the present polymerization have a hyperbranched structure. The polymerization system at 70 °C involved an ESR-observable nitroxide radical formed by the addition of polymer radical to the nitro group of NB. The polymerization was kinetically investigated in dioxane. The initial polymerization rate (R_p) at 70 °C was expressed by R_p=k[MAIB]^0.5[DVB]^0.9[NB]^−0.4. The kinetic results were explained on the basis of the reversible addition of polymer radical to NB and the termination between the polymer radical and the nitroxide radical. The overall activation energy of the polymerization was 27.8 kcal/mol.     

Adsorption of camphor and 2,2′-bipyridine on Bi(1 1 1) electrode surface

Impedance spectroscopy and in situ STM methods have been used for investigation of the camphor and 2,2′-bipyridine (2,2′-BP) adsorption at the electrochemically polished Bi(1 1 1) electrode from weakly acidified Na₂SO₄ supporting electrolyte solution. The influence of electrode potential on the adsorption kinetics of camphor and 2,2′-BP on Bi(1 1 1) has been demonstrated. In the region of maximal adsorption, i.e. capacitance pit in the differential capacitance versus electrode potential curve, the heterogeneous adsorption and diffusion steps are the rate determining stages for camphor and 2,2′-BP adsorption at the Bi(1 1 1) electrode. It was found that for camphor | Bi(1 1 1) interface the stable adsorbate adlayer detectable by using the in situ STM method has been observed only at the positively charged electrode surface, where the weak co-adsorption of SO₄²⁻ anions and camphor molecules is possible. At the weakly negatively charged Bi(1 1 1) electrode surface there are only physically adsorbed camphor molecules forming the compact adsorption layer. The in situ STM data in a good agreement with impedance data indicate that a very well detectable 2,2′-BP adsorption layer is formed at Bi(1 1 1) electrode in the wide region of charge densities around the zero charge potential.     

New heterobimetallic Cu(I)–Pd(II)-containing polymer complexes: Electrochemical synthesis and application in catalysis

Electrochemical approach to a new electroactive heteropolynuclear catalytic system based on polyamic acids with biquinolyl (biQ) fragments in the polymer backbone capable of coordination to Pd^II and Cu^I-ions was developed using sacrificial Pd and Cu anodes. The order of anode dissolution (first Pd and then Cu) was shown to be important for the synthesis of the heteropolynuclear complex. The opposite order of dissolution resulted in the oxidation of the initially formed Cu^I ions to Cu^II. The redox properties of the obtained heteronuclear polymer complexes containing Cu^I and Pd^II coordination units were characterized by cyclic voltammetry. The catalytic properties of the resultant metal–polymer system were investigated and it showed high catalytic activity in the reaction of aryl halides with phenylacetylene (Sonogashira coupling) at a small Pd loadings (0.1 mol%) yielding 50–90% of arylphenylacetylene depending on the nature of the aryl halide. The proposed catalytic system also exhibits high catalytic activity in cascade cyclisations of 2-iodoaniline and 2-iodophenole in the presence of phenylacetylene yielding synthetically useful 2-phenylindole (90%) and 2-phenylbenzofuran (92%).     

An effective multipurpose building block for 3D electropolymerisation: 2,2′-Bis(2,2′-bithiophene-5-yl)-3,3′-bithianaphthene

Novel thiophene-based oligomer, 2,2′-bis(2,2′-bithiophene-5-yl)-3,3′-bithianaphthene (TX), was designed and synthesized, and its electrochemical and spectral properties characterised. TX was readily polymerised electrochemically to form well organized conducting homopolymer films on various solid electrode substrates. Moreover, it was successfully used for deposition by electropolymerisation of electrochemically active thin films of co-polymers with three different monomers of functionalised bis(2,2′-bithienyl)methane derivatives. It appeared that TX was an effective crosslinker and 3D promoter in these electropolymerisations involving co-monomers intrinsically showing limited aptitude for the electropolymerisation or forming polymer films of low conductivity. This attractive TX ability stems from combination of its (i) high conjugation efficiency in each of the two planar moieties, (ii) intrinsic 3D structure on account of the presence of the central node, and (iii) intrinsic regioselectivity in electropolymerisation on account of the positions of the two available free α-thiophene sites.     

Synthesis, structural characterization and microbial activities of mixed ligand copper(II) complexes of 2,2′-bipyridine and acetylacetonate

Two new mixed ligand complexes of copper(II) with acetylacetonate (acac) and 2,2′-bipyridine (bpy) belonging to the class of cytotoxic and antineoplastic compounds known as CASIOPEINAS® have been synthesized and characterized on the basis of analytical and spectroscopic data. Molecular structures of the complexes, [Cu(acac)(bpy)Cl][Cu(acac)(bpy)(H₂O]Cl.H₂O and [Cu(acac)(bpy)Br]H₂O, were established by single crystal X-ray study. The Cu(II) ion in both the complexes exhibited square pyramidal geometry with acac and bpy in the equatorial plane and halide/water in the axial position. Interestingly, for the complex with chloride anion, two types of complexes with chloride and water at the axial positions were derived from the same reaction and co-crystallized in the asymmetric unit with strong intermolecular interactions. Microbial property of these two complexes as antibacterial and antifungal agents has been investigated and some of the results are comparable to that of the standard drugs such as E. coli, P. aeruginosa, S. aureus, S. pyogenes, A. niger and C. albicans, used in this study.     

Redox and catalytic properties of new polypyrrole modified electrodes functionalized by [Ru(bpea)(bpy)H2O] complexes; bpea=N,N′-bis(2-pyridylmethyl)ethylamine, bpy=2,2′-bipyridine

New ruthenium(II) complexes containing one or two pyrrole-functionalized polypyridylic ligands have been prepared in order to study their electrochemical behaviour in heterogeneous phase, after anodic polymerization from CH₂Cl₂ solution on an electrode surface. Complexes containing one pyrrole unit have general formula [Ru(bpea-pyr)(bpy)(L)]²⁺ (bpea-pyr=N-[3-bis(2-pyridylmethyl)aminopropyl]pyrrole, bpy=2,2′-bipyridine, L=Cl, complex 3, or L=H₂O, complex 1), whereas compounds having two pyrrole units correspond to [Ru(bpea-pyr)(bpy-pyr)(L)]²⁺ (bpy-pyr=4-methyl-4′-pyrrolylbutyl-2,2′-bipyridine, L=Cl, complex 4, or L=H₂O, complex 2). Upon oxidative polymerization, all complexes form highly stable polypyrrolic films on a graphite disk electrode surface. An electrode modified with complex 2 polypyrrole coating film, C/poly-2, has been tested as heterogeneous catalyst for the oxidation of benzyl alcohol, showing a remarkably high efficiency and notably improving the results obtained with analogous complexes in homogeneous phase.     

Polybinaphthyls incorporating chiral 2,2′-binaphthyl and isoquinoline moieties by Sonogashira reaction

Polymers P-1, P-2, P-3, P-4 and P-5 were synthesized by the polymerization of 5,8-bis(ethynyl)isoquinoline (M-1) with (R)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthyl ((R)-M-2), (S)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthyl ((S)-M-2), (R)-6,6′-dibromo-2,2′-bisbutoxy-1,1′-binaphthyl ((R)-M-3), (S)-6,6′-dibromo-2,2′-bisbutoxy-1,1′-binaphthyl ((S)-M-3), and rac-6,6′-dibromo-2,2′-bisbutoxy-1,1′-binaphthyl (M-4) under Sonogashira reaction, respectively. Both monomers and polymers were analyzed by NMR, MS, FT-IR, UV-vis spectroscopy, DSC-TGA, fluorescence spectroscopy, GPC and circular dichroism (CD) spectroscopy. CD spectra of polymers P-1 and P-2, P-3 and P-4 are almost identical except that they gave opposite signals at each wavelength. The long wavelength CD effect of P-1 and P-2 can be regarded as the more extended conjugated structure in the repeating unit and the helical backbone in the polymer chain. All five polymers have strong blue-green fluorescence due to the efficient energy migration from the extended π-electronic structure of the repeating unit of the polymers to the chiral binaphthyl core and are expected to provide understanding of structure-property relationships of the chiral conjugated polymers.     

Structural and electronic effects induced by carboxylic acid substitution in isomeric 2,2′-bithiophenes and oligothiophenes: A computational study

The structural and electronic properties of carboxylic acid-substituted 2,2′-bithiophenes have been examined using quantum mechanical methods based on density functional theory. Calculations at the B3PW91/6-31+G(d,p) level were performed on 2,2′-bithiophene-4,4′-dicarboxylic acid, 2,2′-bithiophene-3,4′-dicarboxylic acid and 2,2′-bithiophene-3,3′-dicarboxylic acid, different arrangements being additionally considered for the carboxylic acid substituents of each isomer. The energy gap calculated for 2,2′-bithiophene-3,4′-dicarboxylic acid was about 0.15 eV smaller than that predicted for unsubstituted 2,2′-bithiophene. Additional calculations were performed on oligothiophenes containing n carboxylic acid substituted thiophene rings, n ranging from 2 to 7. The results, which allowed to estimate the band gap for the corresponding poly(thiophene carboxylic acid)s, indicated that the introduction of carboxylic acid substituents at polythiophene produces a very small increase in the ε_g gap.     

Electrochemically prepared polymer solar cell by three-layer deposition of poly(3,4-ethylenedioxythiophene)/poly(2,2′-bithiophene)/fullerene (PEDOT/PBT/C60)

A new electrochemical approach to fabricate polymer solar cell has been developed. Electropolymerization of 2,2′-bithiophene was done on top of the electrodeposited p-doped PEDOT layer. Fullerene was deposited as a third layer after initiating n-doping of the polymers. Composition and oxidation states of the polymers were monitored by UV-Vis-NIR spectroscopy. Morphological changes were followed with Atomic Force Microscopy (ATM) revealing rough nanostructures of the layers. The composition and performance of the solar cells were compared to the cells fabricated by using conventional spin-coating technique. Photoresponse with the maximum V_oc of 0.47 V and the highest J_sc of 0.55 mA/cm² was measured.     

Synthesis of poly(1,4-naphthylene) bearing crown ether side chain by asymmetric oxidative coupling polymerization

The oxidative coupling polymerization of racemic-, (R)-, and (S)-2,2′,3,3′-tetrahydroxy-1,1′-binaphthyl derivatives bearing a crown ether moiety was carried out in the presence of a Cu(I) or Cu(II) catalyst with various ligands, such as N,N,N′,N′-tetramethylethylenediamine, (S)-(+)-1-(2-pyrrolidinylmethyl)pyrrolidine, (−)-sparteine [(−)Sp], and (S)-(−)-2,2′-isopropylidenebis(4-phenyl-2-oxazoline). Methanol-insoluble poly(binaphthyl crown ether) with a molecular weight up to M_n=4.1×10³ was synthesized in moderate yields. Polymerization using (−)Sp proceeded in an S-selective manner; the polymer with the highest negative specific rotation was obtained with the (S)-monomer. The obtained polymers exhibited characteristic abilities for chiral recognition toward amino acids, such as 2-phenylglycine hydrochloride and 2-phenylglycine methyl ester hydrochloride.     

Ion-exchange voltammetry of tris(2,2′-bipyridine) nickel(II), cobalt(II), and Co(salen) at polyestersulfonated ionomer coated electrodes in acetonitrile: Reactivity of the electrogenerated low-valent complexes

The electrochemical behaviour of [Ni(bpy)₃(BF₄)₂], [Co(bpy)₃(BF₄)₂], and Co(salen) (where bpy = 2,2′-bipyridine, and salen = N,N′-bis(salicylidene)ethylenediamine) is studied at a glassy carbon electrode modified with the poly(estersulfonate) ionomer Eastman AQ 55 in acetonitrile (MeCN). It is shown that the nickel complex is strongly incorporated into the polymer. The reduction of the divalent nickel compound features a two-electron process leading to a nickel(0) species which is released from the coating because of the lack of electrostatic attraction with the ionomer. Yet, the neutral zerovalent nickel-bipyridine complex is reactive towards ethyl 4-iodobenzoate and di-bromocyclohexane despite the presence of the polymer. The activation of the aryl halide occurs through an oxidative addition, whereas, an electron transfer is involved in the presence of the alkyl halide making the catalyst regeneration much faster in the latter case. The electrochemical study of [Co(bpy)₃(BF₄)₂] shows that incorporation of the cobalt complex into the polymer is efficient, provided excess bpy is used. This excess bpy does not interfere with the electrocatalytic activity of the cobalt complex incorporated in the AQ coating and efficient electrocatalysis is observed towards di-bromocyclohexane and benzyl-bromide as substrates. Finally, replacement of the bpy ligand with the macrocycle N,N′-bis(salicylidene)ethylenediamine, salen, leads to the incorporation of the non-charged Co^II(salen) complex into the AQ 55 polymer showing the relevancy of hydrophobic interactions. The reaction between the electrogenerated [Co^I(salen)]⁻ with 1,2-dibromocyclohexane exhibits a fast inner sphere electron transfer.     

Copper(I) catalyzed asymmetric oxidative cross-coupling copolymerization leading to alternating copolymers

The asymmetric oxidative coupling copolymerization of 6,6′-dihydroxy-2,2′-binaphthalene and dihexyl 6,6′-dihydroxy-2,2′-binaphthalene-7,7′-dicarboxylate with the copper(I)-diamine catalysts under an O₂ atmosphere was carried out. The copolymerization using the CuCl-(S)-(−)-2,2′-isopropylidenebis(4-phenyl-2-oxazoline) catalyst [(S)Phbox], afforded a polymer with the high cross-coupling selectivity of 93%, that is, a copolymer with a mainly alternating structure, in 80% yield. The number-average molecular weight of the methanol-ethylacetate (1/3 v/v)-insoluble part of the copolymer was 1.1×10⁴. To estimate the enantioselectivity with respect to the cross-coupling linkage in the obtained copolymer, the model asymmetric oxidative cross-coupling reaction with CuCl-(S)Phbox was also examined, and the products showed a 96% cross-coupling selectivity and enantioselectivity of 43% ee (S).     

Color lightness and highly organosoluble fluorinated polyamides, polyimides and poly(amide-imide)s based on noncoplanar 2,2′-dimethyl-4,4′-biphenylene units

A new diamine monomer containing noncoplanar methyl substitution, 2,2′-dimethyl-4,4′-bis(2-trifluoromethyl-4-aminophenoxy)biphenyl (DBTFAPB) was successfully synthesized and used in the preparation of a series of polyamides and polyimides by direct polycondensation with various aromatic dicarboxylic acids and tertacarboxylic dianhydrides. A new noncoplanar dicarboxylic acid monomer containing noncoplanar methyl substitution, 2,2′-dimethyl-4,4′-bis(2-trifluoromethyl-4-trimellitimidophenoxy)biphenyl (DBTFTPB) was also successfully synthesized by refluxing the diamine, DBTFAPB, with trimellitic anhydride in glacial acetic acid. A series of new poly(amide-imide)s were prepared directly from DBTFTPB with various diamines in N-methyl-2-pyrrolidinone (NMP). All the polymers exhibited excellent solubility in solvents, such as N-methyl-2-pyrrolidinone (NMP), N,N-dimethylacetamide (DMAc), N,N-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), pyridine, tetrahydrofuran (THF), cyclohexanone and γ-butyrolactone at room temperature or upon heating at 70 °C. Inherent viscosities of the polymers were found to range between 0.60 and 1.34 dL g⁻¹. Gel permeation chromatography (GPC) of the polymers showed number-average and weight-average molecular weight up to 7.3×10⁴ and 17.9×10⁴, respectively. These polymers showed that the glass transition temperatures were between 230 and 265 °C, and the 10% mass loss temperatures were higher than 460 °C in nitrogen atmosphere. All the polymers could be cast into flexible and tough films from DMAc solutions. They had a tensile strength in the range of 82-124 MPa and a tensile modulus in the range of 1.9-2.9 GPa. These polymers exhibited low dielectric constants ranging from 2.87 to 4.03, low moisture absorption in the range of 0.29-3.20%, and high transparency with an ultraviolet-visible absorption cut-off wavelength in the 347-414 nm range.     

Polybinaphthyls incorporating chiral (R) or (S)-2,2′-binaphthyland oxadiazole moieties by Stille reaction

Chiral polymers P-1 and P-2 were prepared by the polymerization of (R)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthyl ((R)-M-1) and (S)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthyl ((S)-M-1) with 2,5-bis[(4-tributylstannyl)phenyl]-1,3,4-oxadiazole (M-2) via Pd(PPh₃)₄ catalyzed Stille coupling reaction. 1,3,4-Oxadiazole unit not only has high electron affinity, high thermal and oxidative stability, but also serves as a good chromophore. Polymers have strong blue fluorescence due to the efficient energy migration from the extended π-electronic structure of the polymers to the chiral binaphthyl core and can be expected to have potential application in the materials of fluorescent sensors. Circular dichroism (CD) spectra of polymers P-1 and P-2 are almost identical except that they gave opposite signals at each wavelength. The long wavelengths CD effect of P-1 and P-2 can be regarded as the more extended conjugated structure in the repeating unit and a high rigidity of the polymer backbone.     

A novel multichromic copolymer via electrochemical copolymerization of (S)-1,1′-binaphthyl-2,2′-diyl bis(N-(6-hexanoic acid-1-yl) pyrrole) and 3,4-ethylenedioxythiophene

Copolymer based on (S)-1,1′-binaphthyl-2,2′-diyl bis(N-(6-hexanoic acid-1-yl) pyrrole) (BPL) and 3,4-ethylenedioxythiophene (EDOT) is electrochemically synthesized and characterized. The comonomers exhibit relatively closer onset oxidation potentials, implying that the electrochemical copolymerization is relatively easy to be achieved. Electrochemical methods, FTIR, ¹H NMR and UV-vis analysis confirm that the resulting polymer is a copolymer rather than a blend or a composite of the respective homopolymers. Spectroelectrochemical analysis reveals that the copolymer film has distinct electrochromic properties from that of the BPL homopolymer film and shows six different colors under various potentials. At the neutral state of the copolymer, the π → π* transition absorption peak is located at 535 nm and E_g is calculated as 1.78 eV. The copolymer film shows a maximum optical contrast (ΔT%) of 31% and a switching time of 1.2 s which are higher and faster than those of the homopolymer of BPL (PBPL, 7.8% and 2 s). The new multichromic copolymer is thermally stable up to 345 °C and is electrochemically stable up to 1.39 V. SEM images illustrate that the copolymer film presents a much smoother surface than that of the respective homopolymers.     

Morphology control of poly(2,2′-phenylene-5,5′-bibenzimidazole) by reaction-induced crystallization during polymerization

Morphology control of polybenzimidazoles was examined by reaction-induced phase separation during polymerization. Polymerizations of 3,3′-diaminobenzidine with terephthalic acid or diphenyl terephthalate were carried out in poor solvents. The morphology of the precipitated poly[2,2′-(1,4-phenylene)-5,5′-bibenzimidazole] (PpBBI) was significantly influenced by the polymerization conditions, and the aggregates of nano-scale PpBBI fibers were obtained by the polymerization at a concentration of 3-5% and 320-350 °C in dibenzyltoluene. The average diameter of the fibers was ca. 50 nm and inherent viscosities of the precipitates were 0.35-0.58 dL g⁻¹. They possessed high crystallinity and thermal stability. The oligomers were precipitated first by the reaction-induced crystallization to form the highly crystalline lath-like crystals at an initial stage of polymerization. Then the lath-like crystals were split into disentangled aggregates of fine fibers with maintaining the high crystallinity. The polymerization mainly proceeded when the oligomers were registered into the crystals. The obtained aggregates of nano-scale fibers could be recognized as nonwoven fabrics. Morphology control of poly[2,2′-(1,3-phenylene)-5,5′-bibenzimidazole] was also examined and particles were mainly formed.