Direct electrochemical behavior of cytochrome c on DNA modified glassy carbon electrode and its application to nitric oxide biosensor

Cytochrome c/DNA modified electrode was achieved by coating calf thymus DNA onto the surface of glassy carbon electrode firstly, then immobilizing cytochrome c on it by multi-cyclic voltammetric method and characterized by the electrochemical impedance. The electrochemical behavior of cytochrome c on DNA modified electrode was explored and showed a quasi-reversible electrochemical redox behavior with a formal potential of 0.045 ± 0.010 V (versus Ag/AgCl) in 0.10 M, pH 5.0, acetate buffer solution. The peak currents were linearly with the scan rate in the range of 20-200 mV/s. Cytochrome c/DNA modified electrode exhibited elegant catalytic activity for the electrochemical reduction of NO. The catalytic current is linear to the nitric oxide concentration in the range of 6.0 × 10⁻⁷ to 8.0 × 10⁻⁶ M and the detection limit was 1.0 × 10⁻⁷ M (three times the ratio of signal to noise, S/N = 3).     

Direct electrochemistry and electrocatalysis of cytochrome c based on chitosan-room temperature ionic liquid-carbon nanotubes composite

A robust and effective composite film combined the benefits of room temperature ionic liquid (RTIL), chitosan (Chi) and multi-wall carbon nanotubes (MWNTs) was prepared. Cytochrome c (Cyt c) was successfully immobilized on glassy carbon electrode (GCE) surface by entrapping in the composite film. Direct electrochemistry and electrocatalysis of immobilized Cyt c were investigated in detail. A pair of well-defined and quasi-reversible redox peaks of Cyt c was obtained in 0.1 mol L⁻¹ pH 7.0 phosphate buffer solution (PBS), indicating the Chi-RTIL-MWNTs film showed an obvious promotion for the direct electron transfer between Cyt c and the underlying electrode. The immobilized Cyt c exhibited an excellent electrocatalytic activity towards the reduction of H₂O₂. The catalysis current was linear to H₂O₂ concentration in the range of 2.0 × 10⁻⁶ to 2.6 × 10⁻⁴ mol L⁻¹, with a detection limit of 8.0 × 10⁻⁷ mol L⁻¹ (S/N = 3). The apparent Michaelis-Menten constant (K_m) was calculated to be 0.45 ± 0.02 mmol L⁻¹. Moreover, the modified electrode displayed a rapid response (5 s) to H₂O₂, and possessed good stability and reproducibility. Based on the composite film, a third-generation reagentless biosensor could be constructed for the determination of H₂O₂.     

Direct electrochemistry of Cytochrome c on natural nano-attapulgite clay modified electrode and its electrocatalytic reduction for H2O2

Natural nano-structural attapulgite clay was purified by mechanical stirring with the aid of ultrasonic wave and its structure and morphology was investigated by XRD and transmission electron microscopy (TEM). Cytochrome c was immobilized on attapulgite modified glassy carbon electrode. The interaction between Cytochrome c and attapulgite clay was examined by using UV-vis spectroscopy and electrochemical methods. The direct electron transfer of the immobilized Cytochrome c exhibited a pair of redox peaks with formal potential (E0′) of about 17 mV (versus SCE) in 0.1 mol/L, pH 7.0, PBS. The electrode reaction showed a surface-controlled process with the apparent heterogeneous electron transfer rate constant (k_s) of 7.05 s⁻¹ and charge-transfer coefficient (α) of 0.49. Cytochrome c immobilized on the attapulgite modified electrode exhibits a remarkable electrocatalytic activity for the reduction of hydrogen peroxide (H₂O₂). The calculated apparent Michaelis-Menten constant was 470 μmol/L, indicating a high catalytic activity of Cytochrome c immobilized on attapulgite modified electrode to the reduction of H₂O₂. Based on these, a third generation of reagentless biosensor can be constructed for the determination of H₂O₂.     

Colloidal silver nanoparticles modified electrode and its application to the electroanalysis of Cytochrome c

A colloidal silver nanoparticles (CSNs) chemically modified electrode was prepared and its application to the electroanalysis of Cytochrome c (Cyt. c) was studied. The CSNs were prepared by reduction of AgNO₃ with NaBH₄, and were stabilized by oleate. They could be efficiently immobilized on the surface of a silver electrode. The result showed that the CSNs could clearly enhance the electron transfer process between Cyt. c and the electrode compared with bulk silver electrode. Linear sweep voltammetric measurement of Cyt. c at the chemical modified electrode indicated that the oxidative peak current of Cyt. c was linear to its concentration ranging from 8.0 nmol L⁻¹ to 3.0 μmol L⁻¹ with the calculated detection limit was about 2.6 nmol L⁻¹. The direct electrochemistry of Cyt. c was also studied by cyclic voltammetry.     

Amperometric tyrosinase biosensor based on Fe3O4 nanoparticles-coated carbon nanotubes nanocomposite for rapid detection of coliforms

A tyrosinase (Tyr) biosensor was developed based on Fe₃O₄ magnetic nanoparticles (MNPs)-coated carbon nanotubes (CNTs) nanocomposite and further applied to detect the concentration of coliforms with flow injection assay (FIA) system. Negatively charged MNPs were absorbed onto the surface of CNTs which were wrapped with cationic polyelectrolyte poly(dimethyldiallylammonium chloride) (PDDA). The Fe₃O₄ MNPs-coated CNTs nanocomposite was modified on the surface of the glassy carbon electrode (GCE), and Tyr was loaded on the modified electrode by glutaraldehyde. The immobilization matrix provided a good microenvironment for retaining the bioactivity of Tyr, and CNTs incorporated into the nanocomposite led to the improved electrochemical detection of phenol. The Tyr biosensor showed broad linear response of 1.0 × 10⁻⁸-3.9 × 10⁻⁵ M, low detection limit of 5.0 × 10⁻⁹ M and high sensitivity of 516 mA/M for the determination of phenol. Moreover, the biosensor integrated with a FIA system was used to monitor coliforms, represented by Escherichia coli (E. coli). The detection principle was based on determination of phenol which was produced by enzymatic reaction in the E. coli solution. Under the optimal conditions, the current responses obtained in the FIA system were proportional to the concentration of bacteria ranging from 20 to 1 × 10⁵ cfu/mL with detection limit of 10 cfu/mL and the overall assay time of about 4 h. The developed biosensor with the FIA system was well suited for quick and automatic clinical diagnostics and water quality analysis.     

A novel hydrogen peroxide biosensor based on Au-graphene-HRP-chitosan biocomposites

Graphene was prepared successfully by introducing -SO₃⁻ to separate the individual sheets. TEM, EDS and Raman spectroscopy were utilized to characterize the morphology and composition of graphene oxide and graphene. To construct the H₂O₂ biosensor, graphene and horseradish peroxidase (HRP) were co-immobilized into biocompatible polymer chitosan (CS), then a glassy carbon electrode (GCE) was modified by the biocomposite, followed by electrodeposition of Au nanoparticles on the surface to fabricate Au/graphene/HRP/CS/GCE. Cyclic voltammetry demonstrated that the direct electron transfer of HRP was realized, and the biosensor had an excellent performance in terms of electrocatalytic reduction towards H₂O₂. The biosensor showed high sensitivity and fast response upon the addition of H₂O₂, under the conditions of pH 6.5, potential −0.3 V. The time to reach the stable-state current was less than 3 s, and the linear range to H₂O₂ was from 5 × 10⁻⁶ M to 5.13 × 10⁻³ M with a detection limit of 1.7 × 10⁻⁶ M (S/N = 3). Moreover, the biosensor exhibited good reproducibility and long-term stability.     

Electrochemical behavior of p-tert-butyl calix[8]arene in CH2Cl2

The electrochemical behavior of p-tert-butyl calix[8]arene has been investigated by cyclic voltammetry. The result shows that there is an irreversible electrochemical oxidative wave when the potential ranges from −0.3 to 1.6 V versus Ag/0.1 M AgNO₃ in acetonitrile (Ag/Ag⁺). At 25 °C, the peak potential is ca. 1.43 V (versus Ag/Ag⁺) at scan rate of 0.05 V s⁻¹. The number of the electrons transferred in the electrochemical reaction is four. The diffusion coefficient of p-tert-butyl calix[8]arene is 2.8 × 10⁻⁵ cm² s⁻¹. The diffusion activation energy is 12.3 kJ mol⁻¹.     

Electrochemiluminescent behavior of luminol on the glassy carbon electrode modified with CoTPP/MWNT composite film

A glassy carbon electrode (GCE) modified with cobalt(II) meso-tetraphenylporphrine/multiwall-carbon nanotube (CoTPP/MWNT) was applied to investigate the electrochemiluminescent (ECL) behavior of luminol. The ECL intensity of luminol was found to be increased greatly on this modified electrode. The presence of cobalt(II) meso-tetraphenylporphrine (CoTPP) can catalyze the reduction of oxygen on the electrode surface to produce HOO⁻, which can increase the ECL intensity of luminol. Moreover, MWNT can provide the more effective area of the electrode, and can act as a promoter to enhance the electrochemical reaction. The proposed method enables a detection limit for luminol of 1.0 × 10⁻⁸ mol/L in the neutral solution. Under the optimum condition, the enhanced ECL intensity of luminol by H₂O₂ had a linear relationship with the concentration of H₂O₂ in the range of 1.0 × 10⁻⁷ to 8.0 × 10⁻⁸ mol/L with the detection limit of 5.0 × 10⁻⁹ mol/L.     

The ultrasonic electropolymerization of an 5-[o-(4-bromine amyloxy)phenyl]-10,15,20-triphenylporphrin (o-BrPETPP) film electrode and its electrocatalytic properties to dopamine oxidation in aqueous solution

5-[o-(4-Bromine amyloxy)phenyl]-10,15,20-triphenylporphrin (o-BrPETPP) was electropolymerized on a glassy carbon electrode (GCE), and the electrocatalytic properties of the prepared film electrode response to dopamine (DA) oxidation were investigated. A stable o-BrPETPP film was formed on the GCE under ultrasonic irradiation through a potentiodynamic process in 0.1 M H₂SO₄ between −1.1 V and 2.2 V versus a saturated calomel electrode (SCE) at a scan rate of 0.1 V s⁻¹. The film electrode showed high selectivity for DA in the presence of ascorbic acid (AA) and uric acid (UA), and a 6-fold greater sensitivity to DA than that of the bare GCE. In the 0.05 mol L⁻¹ phosphate buffer (pH 6.0), there was a linear relationship between the oxidation current and the concentration of DA solution in the range of 5 × 10⁻⁷ mol L⁻¹ to 3 × 10⁻⁵ mol L⁻¹. The electrode had a detection limit of 6.0 × 10⁻⁸ mol L⁻¹(S/N = 3) when the differential pulse voltammetric (DPV) method was used. In addition, the charge transfer rate constant k = 0.0703 cm s⁻¹, the transfer coefficient α = 0.709, the electron number involved in the rate determining step n_α = 0.952, and the diffusion coefficient D_o = 3.54  10⁻⁵ cm² s⁻¹ were determined. The o-BrPETPP film electrode provides high stability, sensitivity, and selectivity for DA oxidation.     

Hybrid electrochemical biosensor for organophosphorus pesticides quantification

An electrochemical biosensor for organophosphorus (OP) pesticides trace level concentrations determination was developed and characterized. It integrates a hybrid biorecognition element consisting of immobilized Arthrobacter globiformis and free acetylcholinesterase (ACh) with a Clark type oxygen probe transducer. The bacteria convert the ACh-generated choline to betaine with oxygen consumption measured as a Clark probe current change. This change representing the sensor response correlates to the concentration of the OP pesticides inhibiting the Ach-catalyzed acetylcholine hydrolysis to choline. The conditions for maximal sensor response to choline were optimized according to the methodology of design of experiments. The analytical performances of the enzyme substrate determination in a wide concentration range (0.1-20 μmol dm⁻³ of acetylcholine) and different ACh activities were established. It was demonstrated that the biosensor ensures reproducible, accurate and reliable chlorophos quantification reaching a limit of detection (LOD) of 1 nmol dm⁻³ and a sensitivity of 0.0252 μA/p(mol dm⁻³) under optimal experimental conditions. The biosensor response time is 200 s and the storage stability is t_L50 = 49 days for the bacterial membrane at ambient temperature. The device is reusable, the bacterial membrane being not affected by OP. The biosensor was applied to chlorophos determination in contaminated milk.     

Hybridization biosensor using sodium tanshinone IIA sulfonate as electrochemical indicator for detection of short DNA species of chronic myelogenous leukemia

Cyclic voltammetry (CV) was used to investigate electrochemical behavior of sodium tanshinone IIA sulfonate (STS) and the interaction between STS and salmon sperm DNA. STS had excellent electrochemical activity on the glassy carbon electrode (GCE) with a couple reversible redox peaks. In pH 4.0 phosphate buffer solution (PBS), the binding ratio between STS and salmon sperm DNA was calculated to be 1:1 and the binding constant was 1.67 × 10⁴ L/mol. A chronic myelogenous leukemia (CML, Type b3a2) DNA biosensor was developed by immobilizing covalently single-stranded CML DNA fragment to a modified GCE. The surface hybridization of the immobilized single-stranded CML DNA fragment with its complementary DNA fragment was evidenced by electrochemical methods using STS as a novel electrochemical indicator, with a detection limit of 6.7 × 10⁻⁹ M and a linear range from 2.0 × 10⁻⁸ M to 2.0 × 10⁻⁷ M. Selective determination of complementary ssDNA was achieved using differential pulse voltammetry (DPV).     

Electrochemical and thermal studies of Li[NixLi(1/3−2x/3)Mn(2/3−x/3)]O2 (x = 1/12, 1/4, 5/12, and 1/2)

Samples of the layered cathode materials, Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂ (x = 1/12, 1/4, 5/12, and 1/2), were synthesized at 900 °C. Electrodes of these samples were charged in Li-ion coin cells to remove lithium. The charged electrode materials were rinsed to remove the electrolyte salt and then added, along with EC/DEC solvent or 1 M LiPF₆ EC/DEC, to stainless steel accelerating rate calorimetry (ARC) sample holders that were then welded closed. The reactivity of the samples with electrolyte was probed at two states of charge. First, for samples charged to near 4.45 V and second, for samples charged to 4.8 V, corresponding to removal of all mobile lithium from the samples and also concomitant release of oxygen in a plateau near 4.5 V. Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂ samples with x = 1/4, 5/12 and 1/2 charged to 4.45 V do not react appreciably till 190 °C in EC/DEC. Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂ samples charged to 4.8 V versus Li, across the oxygen release plateau, start to significantly react with EC/DEC at about 130 °C. However, their high reactivity is similar to that of Li_0.5CoO₂ (4.2 V) with 1 μm particle size. Therefore, Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂ samples showing specific capacity of up to 225 mAh/g may be acceptable for replacing LiCoO₂ (145 mAh/g to 4.2 V) from a safety point of view, if their particle size is increased.     

Electrochemical activity of Geobacter sulfurreducens biofilms on stainless steel anodes

Stainless steel was studied as anode for the biocatalysis of acetate oxidation by biofilms of Geobacter sulfurreducens. Electrodes were individually polarized at different potential in the range −0.20 V to +0.20 V vs. Ag/AgCl either in the same reactor or in different reactors containing acetate as electron donor and no electron acceptor except the working electrode. At +0.20 V vs. Ag/AgCl, the current increased after a 2-day lag period up to maximum current densities around 0.7 A m⁻² and 2.4 A m⁻² with 5 mM and 10 mM acetate, respectively. No current was obtained during chronoamperometry (CA) at potential values lower than 0.00 V vs. Ag/AgCl, while the cyclic voltammetries (CV) that were performed periodically always detected a fast electron transfer, with the oxidation starting around −0.25 V vs. Ag/AgCl. Epifluorescent microscopy showed that the current recorded by chronoamperometry was linked to the biofilm growth on the electrode surface, while CVs were more likely linked to the cells initially adsorbed from the inoculum. A model was proposed to explain the electrochemical behaviour of the biofilm, which appeared to be controlled by the pioneering adherent cells playing the role of “electrochemical gate” between the biofilm and the electrode surface.     

Study on the rapid synthesis of LiNi1−xCoxO2 cathode material for lithium secondary battery

LiNi_1−xCo_xO₂ (x = 0, 0.1, 0.2) cathode materials were successfully synthesized by a rheological phase reaction method with calcination time of 0.5 h at 800 °C. All obtained powders are pure phase with α-NaFeO₂ structure (R-3m space group). The samples deliver an initial discharge capacity of 182, 199 and 189 mAh g⁻¹ (25 mA g⁻¹, 4.35-3.0 V), respectively. The reaction mechanism was also discussed, which consists of a series of defect reactions. As a result of these defect reactions, the reaction of forming LiNi_1−xCo_xO₂ takes place in high speed.     

Electrodeposition of P-type BixSb2−xTey thermoelectric film from dimethyl sulfoxide solution

The electrochemical behaviors of Bi(III), Te(IV), Sb(III) and their mixtures in DMSO solutions were investigated using cyclic voltammetry and linear sweep voltammetry measurements. On this basis, Bi_xSb_2−xTe_y film thermoelectric materials were prepared by potentiodynamic electrodeposition technique from mixed DMSO solution, and the compositions, structures, morphologies as well as the thermoelectric properties of the deposited films were also analyzed. The results show that Bi_xSb_2−xTe_y compound can be prepared in a very wide potential range by potentiodynamic electrodeposition technique in the mixed DMSO solutions. After anneal treatment, the deposited film prepared in the potential range of −200 to −400 mV shows the highest Seebeck coefficient (185 μV/K), the lowest resistivity (3.34 × 10⁻⁵ Ω m), the smoothest surface, the most compact structure and processes the stoichiometry (Bi_0.49Sb_1.53Te_2.98) approaching to the Bi_0.5Sb_1.5Te₃ ideal material most. This Bi_0.49Sb_1.53Te_2.98 film is a kind of nanocrystalline material and (0 1 5) crystal plane is its preferred orientation.     

Effect of Zr/Ti ratio on piezoelectric properties of Pb(Ni1/3Sb2/3)O3-Pb(ZrTi)O3 ceramics

Piezoceramic compositions [Pb(Ni_1/3Sb_2/3)]_0.02-[Pb(Zr_1−yTi_y)]_0.98O₃ with y = 0.46-0.50 were synthesized by solid state route to study the effect of Zr/Ti ratio on crystal structure, microstructure, piezoelectric and dielectric properties. Calcination was performed at 1060 °C. The specimens were sintered at 1280 °C for 1 h. X-ray diffraction studies indicate the co-existence of tetragonal and rhombohedral perovskite phases in these compositions. Microstructural analysis showed the dense and uniform microstructure for [Pb(Ni_1/3Sb_2/3)]_0.02-[Pb(Zr_0.52Ti_0.48)]_0.98O₃. This composition was resulted in optimum values of properties viz. charge constant (d₃₃ = 301 × 10⁻¹² C/N), voltage constant (g₃₃ = 33.7 × 10⁻³ V m/N), product of piezoelectric charge constant and voltage constant (d₃₃ × g₃₃ = 10.12 × 10⁻¹² C V m/N²) and coupling factor (k_p = 0.63). Results indicated that this material composition could be suitable for power harvesting and sensor applications.     

A DNA electrochemical sensor with poly-l-lysine/single-walled carbon nanotubes films and its application for the highly sensitive EIS detection of PAT gene fragment and PCR amplification of NOS gene

A sensitive and novel DNA electrochemical biosensor for the detection of the transgenic plants gene fragment by electrochemical impedance spectroscopy (EIS) was presented. The well-dispersed carboxylic group-functionalized single-walled carbon nanotubes (SWNTs) were dripped onto the carbon paste electrode (CPE) surface firstly, and poly-l-lysine films (pLys) were subsequently electropolymerized by cyclic voltammetry (CV) to prepare pLys/SWNTs/CPE. The morphology of pLys/SWNTs films was examined using a field emission scanning electron microscope (SEM). The pLys/SWNTs films modified electrode exhibited very good conductivity. DNA probes were easily immobilized on the poly-l-lysine films via electrostatic adsorption. The hybridization events were monitored with electrochemical impedance spectroscopy using [Fe(CN)₆]^3−/4− as indicator. The PAT gene fragment from phosphinothricin acetyltransferase gene was detected by this DNA electrochemical sensor. The dynamic detection range of this sensor to the PAT gene fragment was from 1.0 × 10⁻¹² to 1.0 × 10⁻⁷ mol/L. A detection limit of 3.1 × 10⁻¹³ mol/L could be estimated. The PCR amplification of NOS gene from the sample of a kind of transgenic modified bean was also detected satisfactorily by EIS.     

Facile preparation of disposable immunosensor for Shigella flexneri based on multi-wall carbon nanotubes/chitosan composite

Based on multi-wall carbon nanotubes (MWCNT)/chitosan/horseradish peroxidase labeled antibodies to Shigella flexneri (HRP-anti-S. flexneri) biocomposite film on a screen-printed electrode (SPE) surface, a disposable immunosensor has been developed for the rapid detection of S. flexneri. The HRP-anti-S. flexneri can be entrapped into MWCNT/chitosan composite matrix without other cross-linking agent. Thionine and H₂O₂ were used as the mediator and substrate, respectively. The surface morphologies of modified films were characterized by atomic force microscope (AFM). Cyclic voltammery (CV) was carried out to characterize the electrochemical properties of the immobilization of materials on the electrode surface and quantified S. flexneri. Due to the strong electrocatalytic properties of MWCNT and HRP toward H₂O₂, the response signal was significantly amplified. S. flexneri could be detected by the decrease of the reduction peak current before and after immunoreaction. Under optimal conditions, S. flexneri could be detected in the range of 10⁴ to 10¹⁰ cfu mL⁻¹, with a detection limit of 2.3 × 10³ cfu mL⁻¹ (S/N = 3). Furthermore, the proposed immunosensor exhibited a satisfactory specificity, reproducibility, stability and accuracy, indicating that the proposed immunosensor has potential application for a facile, rapid and harmless immunoassay.     

Synthesis and characterization of temperature-responsive copolymer of PELGA modified poly(N-isopropylacrylamide)

Novel amphiphilic PELGA modified temperature-responsive copolymer, [(poly(methoxyethylene glycol)-co-poly(lactic acid)-co-poly-(glycolic acid))acrylate-co-poly(N-isopropylacrylamide)-co-poly(N-hydroxymethylacrylamide)] (PELGAA-co-PNIPAAm-co-PNHMAAm) was synthesized by incorporating PELGA as the amphiphilic moiety into poly(N-isopropylamide) with various LA/GA ratios. Polymers obtained were characterized by FT-IR, GPC, ¹H-NMR and DSC. The lower critical solution temperature (LCST) of the copolymeric nanoparticles was 40±0.6 °C, the critical aggregation concentration (CAC) was 18 mg L⁻¹, and reversible change in nanoparticle size related to temperature was fluctuated between 210±10 and 109±26 nm, while change in zeta potential of the nanoparticles was between −36±6 and −26±4 mV. The transmission electron microscopy (TEM) images of nanoparticles were also presented.     

Electrochemical incineration of p-cresol and o-cresol in the filter-press-type FM01-LC electrochemical cell using BDD electrodes in sulfate media at pH 0

This work shows a comparative study of the incineration of 2-mM p-cresol and o-cresol in 1 M-H₂SO₄ in aqueous media. Microelectrolysis studies indicated that both the p-cresol and o-cresol oxidation were carried out via hydroxyl radicals (OH) formed by water oxidation in the boron-doped diamonds (BDD)-H₂O-H₂SO₄-p-cresol and o-cresol interface. In both cases, the potential and current density ranges, where great amounts of OH are formed, were between 2.3 V ≤ E ≤ 2.75 V versus SHE and J = 10 mA cm⁻². Electrolyses in an undivided FM01-LC reactor were performed at different Reynolds values 27,129 ≤ Re ≤ 42,631, and at J = 10 mA cm⁻². For p-cresol and o-cresol, the rate of degradation was slow, however it increases slightly as a function of the Re, indicating that the oxidation involves a complex pathway; current efficiency also rises as a function of the Re. For p-cresol, the mineralization at Re = 42,631 reached 90%, with 71% current efficiency and an energy consumption of 7.84 kWh m⁻³; whereas o-cresol was mineralized to 84%, with 67% current efficiency and an energy consumption of 6.56 kWh m⁻³. The results obtained in this work demonstrated that o-cresol is more recalcitrant than p-cresol.