Amino functionalization of multiwalled carbon nanotubes by gamma ray irradiation and its epoxy composites

In this paper, γ‐ray radiation technique was utilized to simply functionalize multi‐walled carbon nanotube (MWCNT) with amino groups. The successful amino functionalization of MWCNTs (MWCNTs‐Am) was proven and the physicochemical properties of MWCNTs before and after radiation grafting modifications were characterized using FT‐IR, X‐ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). The results indicated that the γ‐ray radiation had the visible effects on the surface properties of MWCNTs. The effects of various functionalized MWCNTs on morphological, thermal, and mechanical properties of an epoxy‐based nanocomposite system were investigated. Utilizing in situ polymerization, 1 wt% loading of MWCNT was used to prepare epoxy‐based nanocomposites. Compared to the neat epoxy system, nanocomposites prepared with MWCNT‐Am showed 13.0% increase in tensile strength, 20.0% increase in tensile modulus, and 24.1% increase in thermal decomposition temperature. POLYM. COMPOS., 2012. © 2011 Society of Plastics Engineers     

Effect of neodymium‐doped titanium dioxide nanoparticles on the structural,mechanical, and electrical properties of poly(butyl methacrylate) nanocomposites

Nanocomposites based on neodymium‐doped titanium dioxide (Nd‐TiO₂)/poly(n‐butyl methacrylate) (PBMA) have been prepared by an in situ polymerization of butyl methacrylate monomer with varying concentrations of Nd‐TiO₂ nanoparticles. The resulting nanocomposites have been analyzed by ultraviolet (UV)–Visible spectroscopy, Fourier‐transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscope (SEM), differential scanning calorimetry (DSC), thermogravimetric analysis, and impedance analyzer (TGA). The results of UV and FTIR spectroscopy have indicated the interaction of nanoparticles with the PBMA matrix. Spherically shaped nanoparticles with an average size of 10–25 nm have been revealed in the TEM and their homogeneous dispersion, and interaction of polymer matrix has been confirmed by SEM and XRD studies. The thermal stability and glass transition temperature of the composites were significantly enhanced by the addition of nanoparticles. The AC conductivity and dielectric properties of nanocomposites have been found to be higher than pure PBMA, and the maximum electrical properties have been observed for 7 wt% composite. The reinforcing nature of the nanoparticles in PBMA has been reflected in the improvement in tensile strength measurements. The result indicated that the tensile strength of nanocomposites have greatly enhanced by the addition of Nd‐TiO₂ nanoparticles whereas the elongation at break decreases with the loading of nanofillers. To understand the mechanism of reinforcement, tensile strength values have been correlated with various theoretical modeling. The research has been found to be promising in the development of novel materials with enhanced tensile strength, dielectric constant, and thermal properties, which may find potential applications in energy storage and nanoelectronic devices. J. VINYL ADDIT. TECHNOL., 25:9–18, 2019. © 2018 Society of Plastics Engineers     

Synthesis,structure, and properties of high‐impact polystyrene/octavinyl polyhedral oligomeric silsesquioxane nanocomposites

The organic–inorganic hybrid nanocomposites from high‐impact polystyrene/octavinyl polyhedral oligomeric silsesquioxane (HIPS/POSS) containing various percentages of POSS were prepared by free radical polymerization and characterized by Fourier transform infrared spectroscopy (FTIR), ¹H‐NMR, thermal gravity analysis (TGA), X‐ray diffraction (XRD), and transmission electron microscopy (TEM). The octavinyl POSS has formed covalent bond connected PS‐POSS hybrid with polystyrene. POSS can well disperse in the composites at the composition of 0.5 and 1 wt%. The mechanical properties and thermostability of HIPS/POSS nanocomposites were significantly improved. The tensile strength, the izod impact strength, and the elongation at break of the nanocomposite containing 1 wt% of POSS was increased, respectively, by 15.73%, 75.62%, and 72.71% in comparison with pristine HIPS. The thermal decomposition temperature of HIPS/POSS (1 wt% of POSS) was 33°C higher than that of pristine HIPS. The HIPS/POSS nanocomposites showed great potential for applications in many fields, such as electric appliance and automotive trim. POLYM. COMPOS. 37:1049–1055, 2016. © 2014 Society of Plastics Engineers     

Injection‐molded porous hydroxyapatite/polyamide‐66 scaffold for bone repair and investigations on the experimental conditions

Hydroxyapatite/polyamide‐66 (HA/PA66) composite scaffolds were prepared using injection‐molding technique and also analyzed by means of scanning electron microscopy, X‐ray diffraction, differential scanning calorimetry, Fourier transform infrared spectroscopy, and mechanical testing. Compared with common methods to fabricate scaffolds, this process can fabricate composite scaffolds in a rapid and convenient manner by adjusting the experimental conditions of foaming agent and shot size. The interactions between PA66 and HA particles affect the crystallization behavior of PA66 and the pore structure of scaffolds. HA particles can increase the stiffness of composite scaffolds accompanied by the reduction of impact strength, pore size and porosity. The obtained 40 wt% HA/PA66 composite scaffolds with a pore size ranging from 100–500 μm and a porosity more than 65% can simultaneously meet the requirements of porous structure and mechanical performance. POLYM. ENG. SCI., 54:1003–1012, 2014. © 2013 Society of Plastics Engineers     

Mn‐Loaded Mesoporous Silica Nanocomposite: A Highly Efficient Humidity Sensor

We report a relative humidity sensor based on manganese‐nanoparticle‐loaded mesoporous silica SBA‐15 using a facile hydrothermal route. The as‐developed nanocomposite material (Mn/SBA‐15) possesses a high surface area and a high pore volume. The obtained samples were characterized by using low‐angle X‐ray Diffraction (XRD), Fourier‐transform infrared spectroscopy (FTIR), N₂ adsorption–desorption, high‐resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), and energy‐dispersive X‐ray (EDX) spectroscopy techniques. The Mn/SBA‐15 exhibited, improved humidity response and recovery time as compared to pure SBA‐15 in the 11%–92% RH range. Optimal results were obtained for the 5 wt% Mn‐loaded SBA‐15 sample, which displayed excellent linearity, low hysteresis, and high humidity response. A change in ~5 orders of magnitude in resistance was observed over 11%–92% RH range. The investigation of humidity sensing properties of Mn/SBA‐15 nanocomposite shows that this material has good prospects as humidity sensor.     

Effect of octa(aminopropyl) polyhedral oligomeric silsesquioxane (OapPOSS) functionalized graphene oxide on the mechanical,thermal, and hydrophobic properties of waterborne polyurethane composites

A novel graphene nanomaterial functionalized by octa(aminopropyl) polyhedral oligomeric silsesquioxane (OapPOSS) was synthesized and then confirmed by Fourier transform infrared spectroscopy, thermogravimetric analysis (TGA), Raman spectroscopy, X‐ray photoelectron spectroscopy, transmission electron microscopy, scanning electron microscopy with energy‐dispersive X‐ray spectroscopy (SEM EDX), atomic force microscopy, and X‐ray diffraction. The obtained functionalized graphene (OapPOSS‐GO) was used to reinforce waterborne polyurethane (WPU) to obtain OapPOSS‐GO/WPU nanocomposites by in situ polymerization. The thermal, mechanical, and hydrophobic properties of nanocomposites as well as the dispersion behavior of OapPOSS‐GO in the polymer were investigated by TGA, a tensile testing machine, water contact angle tests, and field emission SEM, respectively. Compared with GO/WPU and OapPOSS/WPU composites, the strong interfacial interaction between OapPOSS‐GO and the WPU matrix facilitates a much better dispersion and load transfer from the WPU matrix to the OapPOSS‐GO. It was found that the tensile strength of the OapPOSS‐GO/WPU composite film with 0.20 wt % OapPOSS‐GO exhibited a 2.5‐fold increase in tensile strength, compared with neat WPU. Better thermal stability and hydrophobicity of nanocomposites were also achieved by the addition of OapPOSS‐GO. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44440.     

(Corn Starch and Montmorillonite Nanocomposite)‐Reinforced Polypropylene: Preparation,Properties, and Biodegradability

Blends of polypropylene and thermoplastic starch (TPS) containing different amounts of TPS were prepared with and without modified montmorillonite (C30B) in the presence of ethylene‐(vinyl acetate) copolymer. Mechanical properties, thermal stability, morphology, and biodegradation were investigated. The results of tensile tests showed that the tensile strength and Young's modulus increased but that elongation at break decreased in the presence of C30B. Small‐angle X‐ray scattering patterns and transmission electron microscopy confirmed that the prepared nanocomposites were exfoliated. Scanning electron microscopy (SEM) was used for the investigation of the phase morphology and particle distribution. Thermal gravimetric analysis indicated that the C30B caused an increase in thermal degradation temperature. Biodegradability tests of the specimens were conducted in a fungal culture medium. Biodegradation was assessed by SEM images, monitoring the changes in the FTIR spectra, and the weight loss of specimens after culturing. J. VINYL ADDIT. TECHNOL., 20:16–23, 2014. © 2014 Society of Plastics Engineers     

Electrospun gelatin/nylon‐6 composite nanofibers for biomedical applications

We describe the preparation and characterization of gelatin‐containing nylon‐6 electrospun fibers and their potential use as a bioactive scaffold for tissue engineering. The physicochemical properties of gelatin/nylon‐6 composite nanofibers were analyzed using field emission scanning electron microscopy (FE‐SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, TGA and contact angle and tensile measurements. FE‐SEM and TEM images revealed that the nanofibers were well oriented and showed a good incorporation of gelatin. FTIR spectroscopy and TGA also revealed that there was good interaction between the two polymers at the molecular level. The adhesion, viability and proliferation properties of osteoblast cells on the gelatin/nylon‐6 composite nanofibers were analyzed by an in vitro cell compatibility test. Our results suggest that the incorporation of gelatin can increase the cell compatibility of nylon‐6 and therefore the composite mat obtained has great potential in hard tissue engineering. © 2012 Society of Chemical Industry     

Synthesis and characterization of hybrid clay/poly (N,N‐dimethylaminoethyl methacrylate) nanocomposites

Four quaternary ammonium salt monomers (2a–d) were synthesized from N,N‐dimethylaminoethyl methacrylate and subsequently polymerized to afford cationic polymers (3a–d). The synthesized monomers and polymers were characterized by Fourier transform infrared (FTIR) and proton nuclear magnetic resonance (¹H NMR) spectroscopy. Molecular weights of the synthesized polymers were determined using gel permeation chromatography. Polymer/clay nanocomposites (4a–d) were prepared using solution‐intercalation method and characterized by FTIR, X‐ray diffraction, high‐resolution transmission electron microscopy, energy dispersive X‐ray, and thermogravimetric analysis. Data analysis showed that polymer/clay nanocomposites have intercalated structure. The dielectric properties of the polymer/clay nanocomposites were studied as a function of both temperature and frequency. POLYM. COMPOS., 37:2950–2959, 2016. © 2015 Society of Plastics Engineers     

Study on physical properties of blend films from gelatin and polyacrylamide solutions

Blend films of gelatin and polyacrylamide (PAAm) were prepared by casting the mixed aqueous solutions of both samples in different ratios. All blend films obtained are optically clear to the naked eye. The structure and physical properties of the films were studied by FT‐infrared (FTIR), wide‐angle X‐ray diffraction (WAXD), differential thermal analysis (DTA), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). The experimental results show that the blend films exhibit the higher thermal stability and improved mechanical properties of both tensile strength and elongation at break in dry states, which suggests the occurrence of interaction detected by FTIR between gelatin, PAAm, and water molecules in the films. The morphological transition of the blend films from gelatin‐like to PAAm‐like was observed by SEM. Furthermore, moisture content and water swelling property of the blend films were also investigated, which was consistent with the results from SEM. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 949–955, 2002     

Effect of cloisite 30B clay and sisal fiber on dynamic mechanical and fracture behavior of unsaturated polyester toughened epoxy network

This study examined the dynamic mechanical properties of sisal fiber reinforced unsaturated polyester (UP) toughened epoxy nanocomposites. The chemical structures changes in Epoxy, UP and UP toughened epoxy (Epoxy/UP) systems were characterized by Proton Nuclear magnetic resonance (¹HNMR) spectroscopy. The morphological alterations of the nanocomposites were analyzed by X‐ray diffraction (XRD) and transmission electron microscopy (TEM). The untreated, chemically treated fibers, nanoclays, and the fiber reinforced Epoxy/UP nanocomposites were confirmed by FTIR spectrometer. The obtained mechanical results showed that alkali‐silane treated fibers improve the tensile strength (96%) and flexural strength (60%) of the Epoxy/UP nanocomposite than that of Epoxy/UP blend due to the strong interfacial bonding between the sisal fiber and matrix. The fracture toughness (K_IC) and fracture energy (G_IC) of treated sisal fiber reinforced DGEBA/UP/C30B nanocomposites found to be higher than that of untreated sisal fiber nanocomposites. The dynamic mechanical analysis (DMA) reveals that the fiber reinforced Epoxy/UP nanocomposites contains 30 wt% treated fiber and 1 wt% nanoclays, exhibits the highest storage modulus and better glass transition temperature (T_g) among the other kind of systems. The surface morphology of the fibers, fractured surface of the resins and composites were confirmed by scanning electron microscope (SEM). POLYM. COMPOS., 37:2832–2846, 2016. © 2015 Society of Plastics Engineers     

Preparation and characterization of gelatin/hydroxyapatite nanocomposite for bone tissue engineering

Homogeneous gelatin/hydroxyapatite (GEL/HA) nano‐composites were synthesized by a novel in situ precipitation method, and its corresponding characterizations, including composition, morphology, pore structure, thermal stability, mechanical strength, and biocompatibility, were carried out. High‐magnified scanning electron microscope (SEM) images indicated that nano‐HA with particle size ranging from 20 to 50 nm were uniformly distributed in GEL matrix and tightly integrated with organic phase. Wide angle X‐ray diffraction (XRD) analysis and transmission electron microscope (TEM) images showed that, during the process of mineralization, there existed preferred oriented growth of HA crystals along (002) and (211) crystal planes. Thermogravimetric analysis (TGA) and differential thermal analysis (DTA) indicated that, the thermal stability of GEL molecules enhanced by hybridizing with HA nanocrystals. Interconnected porous GEL/HA nanocomposites with pore size ranging between 50 and 350 μm were prepared by a freeze‐drying method. This pore size was adequate for bone tissue engineering (BTE) applications. In addition, in vitro MG63 osteoblast‐like cell culture illuminated that GEL/HA nanocomposites had excellent cytocompatibility and could promote proliferation of cells. These results suggested that GEL/HA nanocomposite might be an ideal bone substitute. POLYM. COMPOS., 38:1579–1590, 2017. © 2015 Society of Plastics Engineers     

Porous palygorskite‐polythiophene conductive composites for acrylic coatings

Modified palygorskite‐polythiophene (MPA‐PTh) composites were prepared by chemical oxidative polymerization of palygorskite (PA) nucleartor with thiophene (Th) after the surface modification with γ‐(2,3‐epoxypropoxy) propytrimethoxysilane (KH‐560). The MPA‐PTh composites were doped in iodine vapor to create the porous palygorskite‐polythiophene (PMPA‐PTh) conductive composites. Fourier transform infrared spectra (FTIR), X‐ray photoelectron spectroscopy (XPS), X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), N₂ adsorption–desorption isotherms using the Brunauer–Emmett–Teller method (BET) and electrochemical impedance spectrum (EIS) techniques were applied to characterize the modified PA and the prepared composites. According to FTIR and XPS, the KH‐560 was bound to the PA surface and the iodine ion (I₃^? and I₅^?) entered the PTh molecular chains. XRD, SEM, TEM, BET, and EIS analysis confirmed that the doping of iodine not only transform the core–shell MPA‐PTh into the PMPA‐PTh but also improve the electrical conductivity of composites. The PMPA‐PTh composites were fabricated that yield a volume resistivity of ～2.44 × 10² Ω cm and a internal resistances of ～100 Ω, and their BET surface area, BJH (Barrett–Joiner–Halenda) average pore size and BJH cumulative pore volume were improved in comparison with those of the MPA‐PTh composites. SEM images showed that the PMPA‐PTh composites could form consecutive space network and the PMPA‐PTh composites acrylic coating films had advisable conductivity. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

In situ fabrication of polyaniline‐silver nanocomposites using soft template of sodium alginate

Polyaniline (PANI)‐Ag nanocomposites were synthesized by in situ chemical polymerization approach using ammonium persulfate and silver nitrate as oxidant. Characterizations of nanocomposites were done by ultraviolet–visible ( UV–vis), Fourier transform infrared (FTIR), X‐ray diffraction (XRD), scanning electron microscopy, and transmission electron microscopy (TEM). UV–vis, XRD and FTIR analysis established the formation of PANI/Ag nanocomposites and face‐centered‐cubic phase of silver. PANInanofibers were of average diameter ～ 30 nm and several micrometers in length. Morphological analysis showed that the spherical‐shaped silver nanoparticles decorate the surface of PANI nanofibers. Silver nanoparticles of average diameter ～ 5–10 nm were observed on the TEM images for the PANI‐Ag nanocomposites. Such type of PANI‐Ag nanocomposites can be used as bistable switches as well as memory devices. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis of exfoliated PP/LDH nanocomposites via melt‐intercalation: Structure,thermal properties,and photo‐oxidative behavior in comparison with PP/MMT nanocomposites

Exfoliated polypropylene (PP)/layered double hydroxide (LDH) nanocomposites have been successfully synthesized via melt‐intercalation. Their structure, thermal properties, and photo‐oxidative behavior have been characterized by X‐ray diffraction (XRD), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), dynamic mechanical thermal analysis (DMA), X‐ray photoelectron spectroscopy (XPS), and Fourier transform infrared (FTIR) spectrum. TGA and DMA data show that the PP/LDH nanocomposites have enhanced thermal stability compared with virgin PP and corresponding PP/montmorillonites (MMT) nanocomposites, especially in high temperature range during the thermal decomposition of the samples. XPS and FTIR results give positive evidence that the photo‐oxidation mechanism of PP in the PP/LDH materials is not modified compared with that of virgin PP. However, photo‐oxidation rate of PP/LDH materials is much lower than that of PP and PP/MMT samples, indicating that the PP/LDH nanocomposites have better UV‐stability. POLYM. ENG. SCI. 46:1153–1159, 2006. © 2006 Society of Plastics Engineers     

Improved mechanical and thermal properties of bamboo–epoxy nanocomposites

Natural fiber‐reinforced hybrid composites based on bamboo/epoxy/nanoclay were prepared. Ultrasound sonication was used for the dispersion of nanoclay in the bamboo–epoxy composites. The morphology of bamboo–epoxy nanocomposites was investigated by using scanning electron microscopy, transmission electron microscopy, and X‐ray diffraction. The results show that there exists an optimum limit in which the mechanical properties of composites improved by continuously increasing the nanoclay content. The tensile and flexural strength of bamboo–epoxy nanocomposites with 3 wt% nanoclay increased by 40% and 27%, respectively, as compared to pure composites. The highest value of impact strength was obtained for 1 wt% nanoclay content bamboo–epoxy nanocomposites. The enhanced impact strength of bamboo–epoxy nanocomposites was one of the key advantages brought by nanofiller. The results show that incorporation of nanoclay substantially increases the water resistance capability and thermal stability of bamboo–epoxy nanocomposites. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Fabrication of Bone Scaffolds from Cockle Shell Waste

Bone scaffold is a three‐dimensional structure composed of materials that could enhance bone regeneration. Bone scaffolds were prepared using freeze‐drying by varying the cockle shell powder concentration where sodium alginate acted as matrix. The scaffolds were then characterized by X‐ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, texture analyzer, and liquid displacement method. The bioactivity of the scaffolds was evaluated by immersion into a simulated body fluid solution. Cockle shell powder concentrations affected the bone scaffold characteristics. The increment of the powder concentrations improved the physicochemical properties and bioactivity of the scaffolds.     

In situ synthesis and characterization of fluorinated polybenzobisoxazole/silica‐coated magnetic Fe3O4 nanocomposites exhibiting enhanced electromagnetic wave absorption property

A series of magnetic fluorinated polybenzobisoxazole (6FPBO)/silica‐coated Fe₃O₄ magnetic nanoparticles composites were synthesized through in‐situ polymerization. The structure and morphology of the obtained nanocomposites were characterized by X‐ray diffraction, transmission electron microscopy, and scanning electronic microscope (SEM). The SEM images indicated that the crosslinking structure is formed in magnetic 6FPBO nanocomposites. The magnetic and electromagnetic properties of magnetic 6FPBO nanocomposites in the 2–18 GHz frequency range were characterized by vibration sample magnetometer and vector network analyzer, respectively. The calculated reflection loss of the as‐prepared magnetic 6FPBO nanocomposites showed that the best microwave absorption reached to −20 dB at 17 GHz with a matching thickness of 3.00 mm. POLYM. COMPOS., 36:884–891, 2015. © 2014 Society of Plastics Engineers     

Chitosan/silk fibroin composite scaffolds for wound dressing

Three‐dimensional (3D) chitosan/silk fibroin (CS/SF) porous composite scaffolds have been prepared by simply coating a thin layer of CS onto spunlaced SF scaffolds via hydrogen‐bonding assembly technique, and they were characterized by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), X‐ray diffraction (XRD), and mechanical property measurements. The results show that porous scaffolds have a pore diameter around 50–200 μm, and improved mechanical property compared with SF, resulting from strong intermolecular hydrogen bonding interactions between CS and SF, together with the maintained β‐sheet structure of SF. The medical and biological properties of the composite scaffolds were further evaluated. The results demonstrate that they possess good biocompatibility and a broad spectrum of antimicrobial properties. The in vivo animal experiments show that the composite scaffolds promote skin regeneration of rats without any teratogenic effect and inflection, thus they are very promising in the application of wound dressings. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42503.     

Fabrication and characterization of poly(vinyl alcohol)/graphene oxide nanofibrous biocomposite scaffolds

Nanofibrous biocomposite scaffolds of poly(vinyl alcohol) (PVA) and graphene oxide (GO) were prepared by using electrospinning method. The microstructure, crystallinity, and morphology of the scaffolds were characterized through X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). The mechanical properties were investigated by tensile testing. Moreover, Mouse Osteoblastic Cells (MC3T3‐E1) attachment and proliferation on the nanofibrous scaffolds were investigated by MTT [3‐(4,5‐dimeth‐ylthiazol‐2‐yl)‐2,5‐diphenyl tetrazolium bromide] assay, SEM observation and fluorescence staining. XRD and FTIR results verify the presence of GO in the scaffolds. SEM images show the three‐dimensional porous fibrous morphology, and the average diameter of the composite fibers decreases with increasing the content of GO. The mechanical properties of the scaffolds are altered by changing the content of GO as well. The tensile strength and elasticity modulus increase when the content of GO is lower than 1 wt %, but decrease when GO is up to 3 and 5 wt %. MC3T3‐E1 cells attach and grow on the surfaces of the scaffolds, and the adding of GO do not affect the cells' viability. Also, MC3T3‐E1 cells are likely to spread on the PVA/GO composite scaffolds. Above all, these unique features of the PVA/GO nanofibrous scaffolds prepared by electrospinning would open up a wide variety of future applications in bone tissue engineering and drug delivery systems. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013