Synthesis and photoluminescence property of red phosphors LiEu1?xYx(WO4)0.5(MoO4)1.5 for white LED

A series of novel red phosphors LiEu_1−x Y _x (WO₄)_0.5(MoO₄)_1.5 (x=0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.8) were synthesized by conventional solid state reaction method with the starting materials: WO₃, MoO₃, Eu₂O₃, Li₂CO₃ and Y₂O₃. The spectrum and the crystal structure of the phosphors were characterized by F-4500 and XRD respectively. Meanwhile the effects of flux and Y³⁺ concentration on the crystal structure and luminescent properties of the phosphors were investigated. The results showed that the optimal content of flux () was 1 wt% and the optimal doping concentration of Y³⁺ was 0.5 mol. The emission spectrum showed the most intense peak was located at 615 nm, which corresponds to the ⁵ D ₀→⁷ F ₂ transition of Eu³⁺ and that Eu³⁺ occupied the lattice site of noncentrosymmetric environment in the scheelite phases. The excitation spectrum displayed that these phosphors could be effectively excited by ultraviolet (UV) (396 nm) and blue (466 nm) light, nicely in correspondence with the widely applied output wavelengths of ultraviolet or blue LED chips. The influence of flux on the luminescent properties of LiEu_0.5Y_0.5(WO₄)_0.5(MoO₄)_1.5 phosphor was analyzed. The XRD spectra indicated that the flux could help to crystallize the phosphor, and no other phases were formed except the tetragonal. When adding flux, the relative intensity of LiEu_0.5Y_0.5(WO₄)_0.5(MoO₄)_1.5 became much stronger and the average particle size of the phosphor decreased. Supported by the Key Programs for Science and Technology Development of Hubei Province (Grant No. 2005AA105A05)     

Near-infrared quantum cutting in Pr3+-Yb3+ Co-doped oxyfluoride glass ceramics containing CaF2 nanocrystals

The Pr³⁺-Yb³⁺ co-doped oxyfluoride glass-ceramics containing CaF₂ nanocrystals were obtained by thermal treatment on the as-made glasses. The structure of fluoride nanocrystals was investigated. The light-emitting mechanism of Pr³⁺-Yb³⁺ in the near infrared region was proposed and the fluorescence lifetime and quantum efficiency was calculated. The results indicate that the main phase in the oxyfluoride glassceramics is CaF₂ nanocrystal sized at 30 nm. Energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD) have proved the incorporation of Pr³⁺ and Yb³⁺ into CaF₂ nanocrystal lattice. Near-infrared quantum cutting involving Yb³⁺ 980 nm and 1 015 nm (²F_5/2→² F _7/2) emission has been achieved upon the excitation of the ³ P ₀ energy level of Pr³⁺ at 482 nm. The fluorescence lifetime decreases sharply and quantum efficiency increases with increasing Yb³⁺ concentration, and the optimal quantum efficiency reaches 191%.     

Synthesis of polycrystalline Yb:Gd3Ga5O12 nanopowders by homogeneous precipitation method

The Ytterbium doped gadolinium gallium garnet [Yb³⁺:Gd₃Ga₅O₁₂, Yb:GGG] precursor powders were synthesized via homogeneous precipitation method using Yb₂O₃, Ga₂O₃, Gd₂O₃ and ammonium bicarbonate [NH₄HCO₃] as precipitator, and ammonium sulfate [(NH₄)₂SO₄] as additive. The evolution of phase composition and micro-structure of the powders were characterized by — TG DTA, XRD, IR, and TEM. The results indicate that all precursor powders completely transform to Yb:GGG phase by calcining at 900 °C for 8 h, the resultant powders are well dispersed and have smaller particle size approximately 80 nm owing to the electrostatic effect.     

Crystallization and luminescence properties of Sm<Superscript>3+</Superscript>-doped SrO-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript> glass-ceramics

The Sm³⁺-doped SrO-Al₂O₃-SiO₂ (SAS) glass-ceramics with excellent luminescence properties were prepared by batch melting and heat treatment. The crystallization behavior and luminescent properties of the glass-ceramics were investigated by DTA, XRD, SEM and luminescence spectroscopy. The results indicate that the crystal phase precipitated in this system is monocelsian (SrAl₂Si₂O₈) and with the increase of nucleation/crystallization temperature, the crystallite increases from 66 % to 79 %. The Sm³⁺-doped SAS glass-ceramics emit green, orange and red lights centered at 565, 605, 650 and 715 nm under the excitation of 475 nm blue light which can be assigned to the ⁴G_5/2→⁶ H _j/2 (j=5, 7, 9, 11) transitions of Sm³⁺, respectively. Besides, by increasing the crystallization temperature or the concentration of Sm³⁺, the emission lights of the samples located at 565, 605 and 650 nm are intensified significantly. The present results demonstrate that the Sm³⁺-doped SAS glass-ceramics are promising luminescence materials for white LED devices by fine controlling and combining of these three green, orange and red lights in appropriate proportion.     

Effect of pH values on photocatalytic properties of Bi<Subscript>2</Subscript>WO<Subscript>6</Subscript> synthesized by hydrothermal method

Highly crystalline orthorhombic Bi₂WO₆ powders were hydrothermally synthesized from aqueous solutions of Na₂WO₄ · 2H₂O and Bi (NO₃)₃ · 5H₂O over a wide range of pH. The effect of pH on morphologies, sizes and properties of the Bi₂WO₆ crystals was investigated. The band gaps of the as-prepared Bi₂WO₆ were determined from the onset of the absorption edge of UV-vis diffuse reflectance spectra. The methyl orange photodegradation was employed as a probe reaction to test the photocatalytic activity of the as-prepared samples under visible light irradiation. The photocatalytic activities of methyl orange degradation under visible light irradiation are strongly dependent on the pH used in the synthesis. The highest efficiency is observed at pH=7. Funded by the PCSIRT, the National Natural Science Foundation of China (Nos. 50532030 and 50625206) and the Zhejiang Provincial Natural Science Foundation of China (No. Z4080021)     

Preparation and Performance of Magneto-optical Glasses Doped with Tb3＋/Dy3＋

In order to increase the content of rare-earth oxides in magneto-optical glass and improve the Verdet constant, the rare-earth doped ternary Ga2O3-B2O3-SiO2(GBS) system magneto-optical glasses were prepared by the melt quenching technique. The infl uence of Tb3+ and Dy3+ ions on the structure of GBS glasses was investigated using FTIR, DSC and Faraday rotations. The experimental results showed that the content of rare-earth oxides in the glasses with the double incorporation of Tb2O3 and Dy2O3 was higher. The crystallization parameter β achieved the maximum 0.48 with Tb3+/Dy3+ content of 35mol%. Terbium oxide existed mainly in [TbO3] units in the glasses and [TbO4] units were converted into [TbO3] with increasing Tb2O3 content. As Ga3+ ion is larger than B3+ ion in radius, leading to an increasing of the glass network gap and improvement in the ability of accommodating rare earth ions, Verdet constant increased.     

Influence of rare earth co-dopant on the photocatalytic property of TiO<Subscript>2</Subscript> nano-particles

A series of nanometer TiO2 photocatalysts co-doped respectively with rare earth Er3+-Ce3+ and La3+-Fe3+ were prepared by sol-gel method,and the photocatalytic activity under ultra-violet light was evaluated by photocatalytic degradation of methyl blue.The crystallographic forms,particles size,and morphology were characterized by XRD and TEM.The results showed that the optimum heat temperature of co-doped TiO2 was 550 ℃,and the co-doped TiO2 kept anatase.The anatase crystal had the average size of 20 nm.The ...     

The microstructure and properties of Ag(Nb0.8Ta0.2)1−x (Mn0.5W0.5) x O3 ceramic system

The microstructure and dielectric properties of Ag(Nb0.8Ta0.2)1-x(Mn0.5W0.5)xO3(x=0,0.04,0.08,0.12,0.16) ceramic system were investigated.The Ag(Nb0.8Ta0.2)1-x(Mn0.5W0.5)xO3 ceramics were prepared by the traditional solid-state reaction method and were characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM) and Raman spectrometer.The sintering ability and dielectric properties of Ag(Nb0.8Ta0.2)1-x(Mn0.5W0.5)xO3 were found to be improved with the doping of Mn4+ and W6+ ions.The densification temperature of Ag(Nb0.8Ta0.2)1-x(Mn0.5W0.5)xO3 ceramics decreased from 1 080 ℃ to 1 000 ℃ when x increased from 0 to 0.16.Ag(Nb0.8Ta0.2)1-x(Mn0.5W0.5)xO3 ceramic was found to have the best dielectric properties when x=0.08,larger permittivity(■=547) and smaller dielectric loss(tan■=0.00156).     

Preparation, characterization and photocatalytic behavior of WO3-TiO2/Nb2O5 catalysts

TiO2/Nb2O5 photocatalyst loaded with WO3 (WO3-TiO2/Nb2O5) was prepared by a modified hydrolysis process, and characterized by X-ray diffractometry, transmission electron microscopy, Raman spectra and UV-Vis diffuse refraction spectroscopy. The photocatalytic activity of WO3-TiO2/Nb2O5 was investigated by employing splitting of water for O2 evolution. The results indicate that WO3 loading can pronouncedly improve the photocatalytic activity of TiO2/Nb2O5 by using Fe3 as an electron acceptor under UV irradiation. The optimum molar fraction of the loaded WO3 is 2%, and the largest speed of O2 evolution for 2% WO3-TiO2/Nb2O5 catalyst is 151.8 μmol/(L·h).     

Upeonversion Luminescence of Er3＋, Tin3＋ and Yb3＋ Co-doped Gd3Ga5O12 Nanocrystals

A series of Er3+,Tm3+ and Yb3+ doped Gd3Ga5O12 nanocrystals were prepared by a combustion method.The X-ray diffraction(XRD),field emission scanning electron microscope(FESEM)and upconversion(UC)emission spectra were used to characterize the samples.The results of XRD indicate that Gd3Ga5O12:Er3+,Tm3+,Yb3+ nanocrystals with cubic phase can be obtained.Under the excitation of a 980 nm laser,the different rare earth ions doped Gd3Ga5O12 nanocrystals show upconversion luminescence involving the green emission attributed to the 2H11/2→4I15/2,4S3/2→4I15/2 transitions of Er3+ ions,respectively,the red emissions assigned to the 4F9/2→4I15/2 transitions of Er3+ ions and the 1G4→3F4 as well as 3F2,3→3H6 transitions of Tm3+ ions,respectively,the blue emission attributed to 1G4→3H6 transitions of Tm3+ions,and the near-infrared assigned to the 3H4→3H6 transitions of Tm3+ ions.The CIE coordinates for the samples are calculated.The dependence of their upconversion luminescence properties on Yb3+ ion concentration is investigated.     

Decomposing scheelite and scheelite-wolframite mixed concentrate by caustic soda digestion

1　INTRODUCTIONWiththecontinualexploitationanddevelopmentoftungstenmaterials ,wolframitebecomeslessandless .Statisticaldatashowthattheproportionofwol framiteisonly32 .9%andthatofscheeliteis 4 5 .5 %intungstenresources ,therestisscheelite wolframitemixedconcentrateandmostofnewlyexploredtung stenisscheelite[1] .Therefore ,howtoeconomicallyexploitscheelitebecomessignificantlyimportantindevelopingtungstenindustriesinChina .Currently ,causticleachingisappliedtohandlewolframiteconcentrate ,andh…     

Roles of Eu^2＋, Dy^3＋ Ions in Persistent Luminescence of Strontium Aluminates Phosphors

The polycrystalline Eu^2＋ and Dy ^3＋ co-doped strontium aluminates SrAl2O4： Eu^2＋, Dy^3＋ with different compositions were prepared by solid state reactions. The UV-excited photoluminescence, persistent luminescence and thermo-luminescence were studied and compared. Results show that the doped Eu^2＋ ion in SrAl2O4： Eu^2＋, Dy^3＋ phosphors works as not only the UV-excited luminescent center but also the persistent luminescent center. The doped Dy^3＋ ion can hardly yield any luminescence under UV-excitation, but effectively enhance the persistent luminescence and thermo-luminescence of SrAl2O4： Eu^2＋. Dy^3＋ co-doping can help form electron traps with appropriate depth due to its suitable electro-negativity, and increase the density and depth of electron traps. Based on above observations, a persistent luminescence mechanism, electron transfer model, is proposed and illustrated.     

Frequency up-conversion luminescence properties and mechanism of Tm<Superscript>3+</Superscript>/Er<Superscript>3+</Superscript>/Yb<Superscript>3+</Superscript> co-doped oxyfluorogermanate glasses

Oxyfluoride glasses were developed with composition 60GeO 2 ·10AlF 3 ·25BaF 2 ·(1.95-x)GdF 3 · 3YbF 3 ·0.05TmF 3 ·xErF 3 (x=0.02,0.05,0.08,0.11,0.14,0.17)in mole percent.Intense blue(476 nm),green(524 and 546 nm)and red(658 nm)emissions which identified from the 1G 4 →3H 6 transition of Tm3+and the(2H 11/2 ,4S 3/2 )→4I 15/2 ,4F 9/2 →4I 15/2 transitions of Er3+,respectively,were simultaneously observed under 980 nm excitation at room temperature.The results show that multicolor luminescence including white l...     

Luminescent properties of BaO-La2O3-B2O3 glasses with dopant

The luminescent properties of glasses synthesized in air atmosphere by conventional high temperature process were stud{ed. The emissions spectra of Eu^2 and Eu^3 were observed in BaO-La2O3-B2O3-Eu2O3 glasses.The results show that the broad emission peaks at 430 nm correspond to 5d→4f emission transition of Eu^2 , the sharp emission peaks at 592, 616, 650 and 250 nm correspond to 5^D0→1Fj(j=1--4) emission transition of Eu^3 ,respectively, which indicates that the BaO-La2O3a-B2O3-Eu2O3 glass can convert ultraviolet and green omponents of sunlight into blue and red light so as to increase the intensity of blue and red light, respectively. The luminescent in--tensity of Eu^2 increases with increasing the molar ratio of Tb^3 in BaO-La2O3-B2O3-Eu2O3a-Tb4O3 glasses, whereas the luminescent intensity of Eua^3 decreases. So the luminescent intensity of Eu(Ⅲ,Ⅱ) is influenced by Tb^3 .These phenomena can be explained by electron transfer mechanism; Eu^3 (4f6) Tb^3 (4f^8)→Eu^2 (4f′) Tb^4 (4f′). Taking advantage of the luminescent properties of BaO-La2O3-B2O3-Eu2O3 glasses, light-conversion glass for agriculture can be produced.     

Nanostructure and formation mechanism of Pt-WO<Subscript>3</Subscript>/C nanocatalyst by ethylene glycol method

Pt-WO3 nanoparticles uniformly dispersed on Vulcan XC-72R carbon black were prepared by an ethylene glycol method.The morphology,composition,nanostructure,electrochemical characteristics and electrocatalytic activity were characterized,and the formation mechanism was investigated.The average particle size was 2.3 nm,the same as that of Pt/C catalyst.The W/Pt atomic ratio was 1/20,much lower than the design of 1/3.The deposition of WO3·xH2O nanoparticles on Vulcan XC-72R carbon black was found to be very difficult by TEM.From XPS and XRD,the Pt nanoparticles were formed in the colloidal solution of Na2WO4,the EG insoluble Na2WO4 resulted in the decreased relative crystallinity and increased crystalline lattice constant compared with those of Pt/C catalyst and,subsequently,the higher specific electrocatalytic activity as determined by CV.The Pt-mass and Pt-electrochemically-active-specific-surface-area based anodic peak current densities for ethanol oxidation were 422.2 mA·mg-1Pt and 0.43 mA·cm-2Pt,1.2 and 1.1 times higher than those of Pt/C catalyst,respectively.     

Preparation and structure characteristics of nano-Bi2O3 powders with mixed crystal structure

The nano-Bi2O3 powders were prepared by a chemical precipitation method with Bi(NO3)3, HNO3 and NaOH as reactants. The structural characteristics and morphology of nano-Bi2O3 powders were investigated by X-ray diffraction and transmission electron microscopy, respectively. The results show that under the optimum condition that 300g/L Bi(NO3)3 reacts at 90℃ for 2 h, the Bi203 powders with 60 nm on the average and 99.5% in purity are obtained. The prepared nano-Bi2O3 powders contain a mixed crystal structure of monoclinic and triclinic instead of traditional structure of monoclinic α-Bi2O3. And the mixed crystal structure is stable in air. The reason for the appearance of the mixed crystal structure may be that the ionic radius ratio of Bi^3 to O^2- changes easily during the formation of nano-Bi2O3 particles by a chemical precipitation method.     

Preparation and mechanical behavior of Mg-based bulk metallic glasses and their matrix composite

Mg87-xCuxDy13(x=22,27,32) bulk metallic glasses (BGMs) with a diameter of 6-8 mm and in-situ Mg phase reinforced Mg70Cu17Dy13 BMG matrix composite with a diameter of 3 mm have been prepared by copper mould casting. The glass forming ability (GFA) of Mg-Cu-Dy alloys have been investigated by differential scanning calorimetry (DSC) and X-Ray diffraction (XRD) and tne mechanical properties have been measured. Results show that Mg87-xCuxDy13(x=22,27,32) alloys in the Mg-Cu-Dy alloy system exhibit excellent GFA, and Mg60Cu27Dy13 alloy has the largest GFA among these alloys. And In-situ Mg phase reinforced Mg70Cu17Dy13 BMG matrix composite exhibits some work hardening and a high fracture compressive strength of 702.38 MPa and some plastic strain of 0.81%. The improvement of the mechanical properties is attributed to the fact that the Mg phase distributed in the amorphous matrix of the alloy has some effective load bearing and plastic deformation ability to restrict the expanding of shear bands and cracks and produce its own plastic deformation.     

Structural characteristics and photocatalytic activity of ambient pressure dried SiO<Subscript>2</Subscript>/TiO<Subscript>2</Subscript> aerogel composites by one-step solvent exchange/surface modification

An ambient pressure synthesis of SiO₂/TiO₂ binary aerogel was prepared through the low-cost precursors of titanium tetrachloride (TiCl₄) and sodium silicate (Na₂O·nSiO₂). After gelation, solvent exchange and surface modification were performed simultaneously and the modified gel was finally dried under ambient pressure. Microstructural analyses by transmission electron microscope (TEM) indicate that fabricated SiO₂/TiO₂ aerogel composite shows similar sponge-like nanostructure as silica aerogel, and the Brunauer–Emmett–Teller (BET) analysis shows that the specific surface area of the composite reaches 605 m²/g, and the average pore size is 9.7 nm. Such binary aerogel exhibits significant photocatalytic performance in this paper for treating model pollutant of methyl orange (MO), and the decolorizing efficiency of MO is detected as 84.9% after 210 mins exposure to UV light irradiation. Degraded gel suspends in the water so as to separate from solution for reuse, and after 4 times recycling, 70% degradation efficiency can be easily reached when composite catalyzed system is exposed for 210 mins under UV irradiation.     

Preparation of AgSnO2 composite powders by hydrothermal process

Silver-tin oxide powders were synthesized by the hydrothermal method with Ag（NH3）2^＋ solution and Na2SnO3 solution as raw materials and Na2SO3 as reductant. The precipitation conditions of Na2SnO3 solution and the reduction conditions of Ag（NH3）2^＋ were also investigated. The powders prepared were characterized by differential thermal analysis （DTA）, X-ray diffraction analysis （XRD）, scanning electron microscope （SEM） and energy spectrum analysis, The results show that pH value of the solution is a key parameter in the formation of Sn（OH）4 precipitate and the reduction reaction of Ag（NH3）2^＋ can release H^＋ ions, which results in synchronous precipitation of Sn（OH）6^2- as Sn（OH）4. The reduction of Ag（NH3）2^＋ and precipitation of Na2SnO3 occur simultaneously and the coprecipitation of silver and tin oxide is reached by the hydrothermal method. The silver-tin oxide composite powders have mainly flake shape of about 0.3 μm in thickness and there exists homogeneous distribution of tin oxide and silver in the powder synthesized.     

Scintillation properties of Gd doped β-PbF2 crystal

A single crystal sample of cubic lead fluoride doped with gadolinium (β-PbF₂:Gd) was prepared by use of the Bridgman-Stockbarger method. The crystal samples for testing with dimension of ø20 mm×20mm long were all polished. The dopant level of gadolinium is 0.15wt%. The light output and decay time of the samples were measured in the lab using¹³⁷Cs source and 1 GeV test beam at AGS respectively. Experimental results indicated that β-PbF₂:Gd crystal produces a weak scintillation emission at room temperature corresponding to a light output of ～6 photoelectrons per MeV and most of the light is collected within a gate of 30 ns. There is no evidence of any significant slow component extending out of 1 μs. In the X-ray excited emission spectra of β-PbF₂:Gd at room temperature, two emission peaks, 277 nm and 312 nm, were found and corresponded to the transition of⁶I_J→⁸S_7/2 and⁶P_J→⁸S_7/2 of Gd³⁺ ions, respectively.