共查询到20条相似文献,搜索用时 109 毫秒
1.
李晓明 《电力系统保护与控制》2009,37(19):130-132
电力系统基本概念是电力系统理论的基础,基本概念的定义应精确与严谨。但是,部分电力系统基本概念的定义不尽人意,例如:电力系统正常运行状态、不正常运行状态、故障状态、电力系统稳态、电力系统暂态、电力系统继电保护基本作用、等。对电力系统的这几个基本概念定义的内涵进行分析与探讨。分析了电力系统正常运行状态的特征,讨论了电力系统正常运行状态与电力系统稳态的关系,分析了电力系统继电保护基本作用的内涵。通过分析,对不严密、不完整的认识提出补充和修改意见。通过对电力系统的这几个基本概念定义内涵的补充和修改,提高了电力系统 相似文献
2.
文章对电力系统的稳定性进行了描述,指出了电力系统低频振荡的产生与分类,结合电力系统的实际发展情况,研究了低频振荡的分析方法和优缺点,简要分析了控制低频振荡的措施,希望借此提高电力系统的稳定性。 相似文献
3.
众所周知,电力系统运行过程中会出现需要显性只是预测困难等问题,构建了基于连续协同机器学习算法的电力系统运行可靠性预测模型。首先,构建连续协同机器学习算法机制实现电力系统运行可靠性精准预测;然后,构建时间正序下的电力系统运行可靠性核心要素样本精准预测机制;最后,借助电力系统运行可靠性预测函数输出最优预测结果。开展了模型工程应用实践验证,验证结果表明,模型满足电力系统运行可靠性预测智慧化改造需求,大幅度优化了电力系统运行可靠性预测智慧可控感知机制,电力系统运行可靠性预测模型核心参数符合工程实践要求。 相似文献
4.
现代电力系统日益复杂、运行方式复杂多变,电力系统通信的实时性越来越重要。本文分析了电力系统通信的实时性要求,探讨了以太网应用于系统通信的可行性,详细分析了以太网应用于电力系统通信时实时性的解决方法。 相似文献
5.
面向可复用体系结构的潮流计算和故障计算软件的实现 总被引:7,自引:0,他引:7
在分析了传统电力系统应用软件体系中存在的基础计算功能和用户图形界面重复开发等一系列问题后,提出了一种新的电力系统应用软件体系结构,并对其关键部件——电力系统基础计算软件进行了设计。在此基础上,应用组件技术和动态链接库,实现了电力系统结线分析、潮流计算和故障计算等电力系统基础计算功能。最后在由电力系统基础计算软件、电力系统数据库和电力系统用户图形界面等组成的电力系统软件体系中验证了电力系统基础计算软件的独立性、灵活性以及中提出的电力系统应用软件体系结构的可行性。 相似文献
6.
7.
形成全国联合电力系统的时机和需要解决的问题 总被引:3,自引:2,他引:3
本文回顾了我国电力系统发展的过程,分析了影响电力系统发展的各种因素,探讨了形成全国联合电力系统的条件和需要解决的问题,最后提出了全国联合电力系统的设想和互联的方式。 相似文献
8.
电力系统综合实验教学的实践与探索吴锦堂关键词:电力系统,实验教学改革,实践探索根据电力系统及其自动化专业教学大纲的要求,我们利用电力系统动态模拟实验设备,结合专业实验教学,为本科生独立开设了“电力系统综合实验课”,探索学生在4年基础课程、专业课程学习... 相似文献
9.
低频振荡是一种不利于电力系统安全和稳定运行的现象,而电力系统稳定器(PSS)可以有效抑制低频振荡。由于励磁系统和电力系统运行方式及工况之间的密切关系,致使电力系统中PSS的协调设计和安装地点的选择成了PSS能否用于电力系统的关键。作者设计了一种调速侧电力系统稳定器,其设计原理和传统的PSS一样简单,且具有较好的鲁棒性,同时还具有多机解耦特性,给本机带来阻尼的同时不会给其它机组带来负阻尼,避免了参数协调和安装地点的选择。最后利用算例仿真验证了调速侧电力系统稳定器不仅可以抑制低频振荡,还可以提高电力系统暂态稳定性。 相似文献
10.
11.
本文研究了UPFC控制传输线路潮流能力,通过对系统功率平衡以及UPFC的潮流控制特性分析,在三维空间中绘出了UPFC各部分的功率运行曲面,为有效选取UPFC各部分的功率容量和判断潮流控制方案的可行性提供了一个直观的手段,说明了在UPFC中采用交叉耦合控制的可行性。利用串联变换器注入传输线路电压的d轴分量控制传输线路上的无功潮流,而用q轴分量来控制传输线路上的有功潮流。控制系统设计中利用频率特性法得到了功率环PI调节器的参数。最后实验结果表明采用文中所述的控制策略能够使得UPFC有良好的潮流调节性能。 相似文献
12.
13.
W. Du H.F. WangS. Cheng J.Y. WenR. Dunn 《International Journal of Electrical Power & Energy Systems》2011,33(1):35-42
An Energy Storage System (ESS) installed in a power system can effectively damp power system oscillations through controlling exchange of either active or reactive power between the ESS and power system. This paper investigates the robustness of damping control implemented by the ESS to the variations of power system operating conditions. It proposes a new analytical method based on the well-known equal-area criterion and small-signal stability analysis. By using the proposed method, it is concluded in the paper that damping control implemented by the ESS through controlling its active power exchange with the power system is robust to the changes of power system operating conditions. While if the ESS damping control is realized by controlling its reactive power exchange with the power system, effectiveness of damping control changes with variations of power system operating condition. In the paper, an example of power system installed with a battery ESS (BESS) is presented. Simulation results confirm the analytical conclusions made in the paper about the robustness of ESS damping control. Laboratory experiment of a physical power system installed with a 35 kJ/7 kW Superconducting Magnetic Energy Storage (SMES) was carried out to evaluate theoretical study. Results are given in the paper, which demonstrate that effectiveness of SMES damping control realized through regulating active power is robust to changes of load conditions of the physical power system. 相似文献
14.
Katsuyuki Tomiyama Masakazu Sato Kouji Yamaji Masahiro Sekita Masuo Goto 《Electrical Engineering in Japan》1998,124(3):10-18
This paper describes power swing damping control by HVDC power modulation. In a hybrid system (where the ac transmission system and the HVDC system compose a loop transmission system), damping control of power swing by control of HVDC power is called power modulation control. The new HVDC link between the Shokoku and Kansai power systems forms a loop transmission system consisting of the existing ac transmission system and the new HVDC transmission system; therefore, power modulation control can be applied for stabilization of the ac system. This paper deals with a newly developed power modulation control system to damp two power-swing modes occurring in a 60-Hz interconnected system and the neighboring power system to the HVDC converter station. Characteristics of power swings in an ac systems, principles of power swing damping control by power modulation, the control system design method, and the results of verification tests by digital and analog simulators are described. It is shown that the developed power modulation system applied to the HVDC link is effective for damping two power swing modes. 相似文献
15.
目前在高压直流输电工程中,当整流站交流系统较弱而要求无功控制功能选择电压控制模式,或无功控制模式处于手动模式时,直流运行中无功控制功能因未配置系统无功平衡控制功能,导致出现交流系统无功越限或不足的问题。现提出一种直流输电工程中无功控制功能的优化策略,并通过RTDS验证了该优化策略的可行性。该策略在高岭背靠背直流工程中实现了首次应用,在确保无功控制功能为手动模式或电压控制模式的同时消除了系统无功越限或不足的问题,提高了直流系统稳定运行效率。 相似文献
16.
粤东电网茅湖子站安全稳定控制系统的分析 总被引:2,自引:2,他引:0
500kV茅湖变电站是连接粤东电网与广东主网的枢纽变电站,是粤东电网安全稳定控制系统的区域控制子站。在介绍粤东电网主系统结构以及粤东电网安全稳定控制系统配置和各站功能的基础上,阐述茅湖子站安全稳定控制系统的功能、控制策略,并针对FWK—C安全稳定控制系统的应用,提出巡视和运行中应注意的问题。 相似文献
17.
电压无功控制系统中模糊积分控制器的设计 总被引:2,自引:0,他引:2
分析了电压无功控制系统中现有控制方法的优缺点 ,设计了一种适合于电力系统电压无功控制的模糊控制器 ,并提出运用积分的方法来限制电压无功控制系统的调节次数。 相似文献
18.
备自投对保障电力系统供电可靠性非常重要,站内备自投孤立运行,缺乏电网全局信息,不利于充分发挥备用电源投入功能。提出基于集中校核与分散控制的备自投系统,该系统包括监视分析、在线投退和离线校核3个方面的功能。同时介绍了与备自投系统技术实施相关的若干关键技术,包括备自投模型、基于风险评估的备自投投退策略、数据可靠性校核和网络备自投控制校核。应用实例表明,备自投系统可以综合全网信息,降低电网运行风险。 相似文献
19.