Integrating employee timetabling with scheduling of machines and transporters in a job-shop environment: A mathematical formulation and an Anarchic Society Optimization algorithm

This paper addresses a ternary-integration scheduling problem that incorporates employee timetabling into the scheduling of machines and transporters in a job-shop environment with a finite number of heterogeneous transporters where the objective is to minimize the completion time of all jobs. The problem is first formulated as a mixed-integer linear programming model. Then, an Anarchic Society Optimization (ASO) algorithm is developed to solve large-sized instances of the problem. The formulation is used to solve small-sized instances and to evaluate the quality of the solutions obtained for instances with larger sizes. A comprehensive numerical study is carried out to assess the performance of the proposed ASO algorithm. The algorithm is compared with three alternative metaheuristic algorithms. It is also compared with several algorithms developed in the literature for the integrated scheduling of machines and transporters. Moreover, the algorithms are tested on a set of adapted benchmark instances for an integrated problem of machine scheduling and employee timetabling. The numerical analysis suggests that the ASO algorithm is both effective and efficient in solving large-sized instances of the proposed integrated job-shop scheduling problem.     

Discrete particle swarm optimization method for the large-scale discrete time–cost trade-off problem

Despite many research studies have concentrated on designing heuristic and meta-heuristic methods for the discrete time–cost trade-off problem (DTCTP), very little success has been achieved in solving large-scale instances. This paper presents a discrete particle swarm optimization (DPSO) to achieve an effective method for the large-scale DTCTP. The proposed DPSO is based on the novel principles for representation, initialization and position-updating of the particles, and brings several benefits for solving the DTCTP, such as an adequate representation of the discrete search space, and enhanced optimization capabilities due to improved quality of the initial swarm. The computational experiment results reveal that the new method outperforms the state-of-the-art methods, both in terms of the solution quality and computation time, especially for medium and large-scale problems. High quality solutions with minor deviations from the global optima are achieved within seconds, for the first time for instances including up to 630 activities. The main contribution of the proposed particle swarm optimization method is that it provides high quality solutions for the time–cost optimization of large size projects within seconds, and enables optimal planning of real-life-size projects.     

Genetic algorithm for minimizing the total weighted completion time scheduling problem with learning and release times

This paper considers a single-machine problem with the sum-of-processing time based learning effect and release times. The objective is to minimize the total weighted completion times. First, a branch-and-bound algorithm incorporating with several dominance properties and two lower bounds are developed for the optimal solution. Then a genetic heuristic-based algorithm is proposed for a near-optimal solution. Finally, a computational experiment is conducted to evaluate the performances of the proposed algorithms. The results show that the branch-and-bound algorithm can solve instances up to 15 jobs, and the average error percentage of the genetic heuristic algorithm is less than 0.105%.     

An improved artificial bee colony algorithm for flexible job-shop scheduling problem with fuzzy processing time

This study addresses flexible job-shop scheduling problem (FJSP) with fuzzy processing time. An improved artificial bee colony (IABC) algorithm is proposed for FJSP cases defined in existing literature and realistic instances in remanufacturing where the uncertainty of the processing time is modeled as fuzzy processing time. The objectives are to minimize the maximum fuzzy completion time and the maximum fuzzy machine workload, respectively. The goal is to make the scheduling algorithm as part of expert and intelligent scheduling system for remanufacturing decision support. A simple and effective heuristic rule is developed to initialize population. Extensive computational experiments are carried out using five benchmark cases and eight realistic instances in remanufacturing. The proposed heuristic rule is evaluated using five benchmark cases for minimizing the maximum fuzzy completion time and the maximum fuzzy machine workload objectives, respectively. IABC algorithm is compared to six meta-heuristics for maximum fuzzy completion time criterion. For maximum fuzzy machine workload, IABC algorithm is compared to six heuristics. The results and comparisons show that IABC algorithm can solve FJSP with fuzzy processing time effectively, both benchmark cases and real-life remanufacturing instances. For practical remanufacturing problem, the schedules by IABC algorithm can satisfy the requirement in real-life shop floor. The IABC algorithm can be as part of expert and intelligent scheduling system to supply decision support for remanufacturing scheduling and management.     

Minimizing job completion time variance for service stability on identical parallel machines

This paper addresses a job scheduling problem on multiple identical parallel machines so as to minimize job completion time variance (CTV). CTV minimization is closely related to the Just-In-Time philosophy and the service stability concept since it penalizes both earliness and tardiness. Its applications can be found in many real-life areas such as Internet data packet dispatching and production planning. This paper focuses on the unrestricted case of the problem where idle times are allowed to exist before machines start to process jobs. We prove several dominant properties about the optimal solution to the problem. For instance, we prove that the mean completion time (MCT) on each machine should be the same under an optimal schedule. Based on these properties, an efficient heuristic algorithm is proposed. Computational experiments are conducted to test the performance of the proposed algorithm. The outputs demonstrate that the proposed algorithm is near optimal for small problem instances and greatly outperforms some existing algorithms for large problem instances.     

考虑“时间-资源”的大型客机协同研制GERT网络优化

研究大型客机协同研制过程中项目活动时间和投入资源具有不确定性的图示评审技术(GERT)网络优化问题.采用GERT网络表征复杂项目研制过程,给出基于GERT的项目完成费用计算方法,提出项目时间与资源投入数量影响下的完工实现概率表征方式;为实现对复杂产品研制项目中时间-费用-资源优化调整,针对项目各活动和整体完工时间的不确定性,建立总完工时间、资源、实现概率受限情况下的时间规划与资源调度优化模型,并给出问题求解的差分进化启发式算法;考虑到大型客机全面试制过程是衡量能否按期完工的关键,以此过程为例进行案例分析,从而表明所提出方法的可行性和有效性.     

Uncertain project scheduling problem with resource constraints

Project scheduling problem is to make a schedule for allocating the loans to a project such that the total cost and the completion time of the project are balanced under some constraints. This paper presents an uncertain project scheduling problem, of which both the duration times and the resources allocation times are uncertain variables. An uncertain programming model with multiple objectives is obtained, whose first objective is to minimize the total cost, and second objective is to minimize the overtime. Genetic algorithm is employed to solve the proposed uncertain project scheduling model, and its efficiency is illustrated by a numerical experiment.     

基于模型分解的多机带时间窗口任务规划算法

针对多机带时间窗口任务规划问题,提出了基于模型分解的规划求解算法。通过引入基于逻辑的Benders分解方法,将经典Benders分解算法应用扩展至带离散时间窗口的混合线性整数规划模型,实现模型分解。采用工艺级商业软件MOSEK与GECODE分别求解主、子问题,同时给出Benders剪枝函数生成方法,以迭代方式收敛解空间获得可行解。实现算法并设计测试案例,实验结果验证了算法的有效性。     

A Benders decomposition for the location-allocation and scheduling model in a healthcare system regarding robust optimization

The hospital location and service allocation is one of the most important aspects of healthcare systems. Due to lack of studies on covering location-allocation and scheduling problems with respect to the uncertain budget, this paper develops a bi-objective hybrid model to locate hospitals and allocate machines and services scheduled. The costs of establishing facilities are assumed to be uncertain, while a robust counterpart model is employed to overcome the uncertainty. Covering the demand of each service is limited as well. Moreover, hospitals have a limited space to the specialized equipment like CT scan and MRI machines, while there is a cost constraint on hospitals and the specialized equipment. The aim of this paper is to find a near-optimal solution including the number of hospitals and the specialized equipment, the location of hospitals, the assignment of demand of each service and the specialized equipment to hospitals, the determination of allowable number of each service of hospitals, the determination of demand that should be transferred from one hospital to another (patient transfer), and schedule services. As the proposed model, minimizing the total costs and the completion time of demand simultaneously, is an NP-hard problem, it is impossible to solve its large-scale version with exact methods in a reasonable time. Thus, a hybrid algorithm including simulated annealing optimization and the Benders decomposition is employed to solve it. The CPLEX optimizer verifies the presented algorithm to solve the proposed model. The sensitivity analysis is performed to validate the proposed robust model against of uncertain situations while the Monte Carlo simulation is used to analyze the quality and the robustness of solutions under uncertain situations. The results show that the uncertainty used in the proposed model properly formulates real-world situations compared to the deterministic case. Finally, the contributions and the future research are presented.

     

Stage- and scenario-wise Fenchel decomposition for stochastic mixed 0-1 programs with special structure

Solving stochastic integer programs (SIPs) is generally difficult. This paper considers a comparative study of stage- and scenario-wise Fenchel decomposition (FD) for two-stage SIPs with special structure. The standard FD approach is based on stage-wise or Benders’ decomposition. This work derives a scenario FD method based on decomposing the SIP problem by scenario and performs a computational study of the two approaches. In particular, two algorithms are studied, stage-wise FD (ST-FD) and scenario-wise FD (SC-FD) algorithms. The algorithms use FD cuts generated based on the scenario subproblem under each decomposition setting to iteratively recover (partially) the convex hull of integer points in the neighborhood of the optimal solution. The L-shaped method is used to solve the LP relaxation of the SIP problem in the ST-FD algorithm, while the progressive hedging algorithm (PHA) is used in the SC-FD algorithm. Computational results on knapsack test instances demonstrate the viability of both approaches towards solving large instances in reasonable amount of time and outperforming a direct solver in most cases. Overall, the ST-FD algorithm provides the best performance in our experiments.     

A dynamic-programming-based exact algorithm for general single-machine scheduling with machine idle time

This paper proposes an efficient exact algorithm for the general single-machine scheduling problem where machine idle time is permitted. The algorithm is an extension of the authors’ previous algorithm for the problem without machine idle time, which is based on the SSDP (Successive Sublimation Dynamic Programming) method. We first extend our previous algorithm to the problem with machine idle time and next propose several improvements. Then, the proposed algorithm is applied to four types of single-machine scheduling problems: the total weighted earliness-tardiness problem with equal (zero) release dates, that with distinct release dates, the total weighted completion time problem with distinct release dates, and the total weighted tardiness problem with distinct release dates. Computational experiments demonstrate that our algorithm outperforms existing exact algorithms and can solve instances of the first three problems with up to 200 jobs and those of the last problem with up to 80 jobs.     

A water-flow algorithm for flexible flow shop scheduling with intermediate buffers

We investigate the flexible flow shop scheduling problem with limited or unlimited intermediate buffers. A common objective of the problem is to find a production schedule that minimizes the completion time of jobs. Other objectives that we also consider are minimizing the total weighted flow time of jobs and minimizing the total weighted tardiness time of jobs. We propose a water-flow algorithm to solve this scheduling problem. The algorithm is inspired by the hydrological cycle in meteorology and the erosion phenomenon in nature. In the algorithm, we combine the amount of precipitation and its falling force to form a flexible erosion capability. This helps the erosion process of the algorithm to focus on exploiting promising regions strongly. To initiate the algorithm, we use a constructive procedure to obtain a seed permutation. We also use an improvement procedure for constructing a complete schedule from a permutation that represents the sequence of jobs in the first stage of the scheduling problem. To evaluate the proposed algorithm, we use benchmark instances taken from the literature and randomly generated instances of the scheduling problem. The computational results demonstrate the efficacy of the algorithm. We have also obtained several improved solutions for the benchmark instances using the proposed algorithm. We further illustrate the algorithm’s capability for solving problems in practical applications by applying it to a maltose syrup production problem.     

An exact algorithm for single-machine scheduling without machine idle time

This study proposes an exact algorithm for the general single-machine scheduling problem without machine idle time to minimize the total job completion cost. Our algorithm is based on the Successive Sublimation Dynamic Programming (SSDP) method. Its major drawback is heavy memory usage to store dynamic programming states, although unnecessary states are eliminated in the course of the algorithm. To reduce both memory usage and computational efforts, several improvements to the previous algorithm based on the SSDP method are proposed. Numerical experiments show that our algorithm can optimally solve 300 jobs instances of the total weighted tardiness problem and the total weighted earliness-tardiness problem, and that it outperforms the previous algorithms specialized for these problems.     

Multi-start iterated local search metaheuristic for the multi-mode resource-constrained project scheduling problem

In this paper a multi-start iterated local search (MS-ILS) algorithm is presented as a new and effective approach to solve the multi-mode resource-constrained project scheduling problem (MRCPSP). The MRCPSP is a well-known project scheduling NP-Hard optimization problem, in which there is a trade-off between the duration of each project activity and the amount of resources they require to be completed. The proposed algorithm generates an initial solution, performs a local search to obtain a local optimum, subsequently, for a certain number of iterations, makes a perturbation to that local optimum and performs a new local search on the perturbed solution. This whole process then restarts with a different initial solution for a certain number of restarts. The algorithm was tested on benchmark instances of projects with 30, 50 and 100 activities from well-known libraries. The obtained results were compared to recent benchmark results from the literature. The proposed algorithm outperforms other solution methods found in related literature for the largest tested instances (100 activities), while for smaller instances it shows to be quite competitive, in terms of the average deviation against known lower bounds.     

A Best-first Branch-and-bound Algorithm for Orthogonal Rectangular Packing Problems

In this paper we discuss the problem of packing a set of small rectangles (pieces) in an enclosing final rectangle. We present first a best-first branch-and-bound exact algorithm and second a heuristic approach in order to solve exactly and approximately this problem. The performances of the proposed approaches are evaluated on several randomly generated problem instances. Computational results show that the proposed exact algorithm is able to solve small and medium problem instances within reasonable execution time. The derived heuristic performs very well in the sense that it produces high-quality solutions within small computational time.     

A new approach to solve the multi-product multi-period inventory lot sizing with supplier selection problem

This research work deals with the multi-product multi-period inventory lot sizing with supplier selection problem. Formerly, this kind of problem was formulated and solved using an exhaustive enumeration algorithm and a heuristic algorithm. In this paper, a new algorithm based on a reduce and optimize approach and a new valid inequality is proposed to solve the multi-product multi-period inventory lot sizing with supplier selection problem. Numerical experiments ratify the success of the proposed heuristic algorithm. For the set of 150 benchmark instances, including 75 small-sized instances, 30 medium-sized instances, and 45 large-sized instances, the algorithm always obtained better solutions compared with those previously published. Furthermore, according to the computational results, the developed heuristic algorithm outperforms the CPLEX MIP solver in both solution quality and computational time.     

求解矩形packing问题的贪心算法

在货物装载、木材下料、超大规模集成电路设计等工作中提出了矩形packing问题。对这一问题，国内外学者提出了诸如模拟退火算法、遗传算法及其它一些启发式算法等求解算法。该文利用人类的智慧及历史上形成的经验，提出了一种求解矩形packing问题的贪心算法。并对21个公开测试实例进行了实算测试，所得结果的平均面积未利用率为0.28%，平均计算时间为17.86s，并且还得到了其中8个实例的最优解。测试结果表明，该算法对求解矩形packing问题相当有效。     

A simple and effective evolutionary algorithm for the capacitated location–routing problem

This paper proposes a hybrid genetic algorithm (GA) to solve the capacitated location–routing problem. The proposed algorithm follows the standard GA framework using local search procedures in the mutation phase. Computational evaluation was carried out on three sets of benchmark instances from the literature. Results show that, although relatively simple, the proposed algorithm is effective, providing competitive results for benchmark instances within reasonable computing time.     

The total adjustment cost problem: Applications,models, and solution algorithms

Resource leveling problems arise whenever it is expedient to reduce the fluctuations in resource utilization over time, while maintaining a prescribed project completion deadline. Several resource leveling objective functions may be defined, consideration of which results in well-balanced resource profiles. In this paper, we concentrate on a special objective function that determines the costs arising from increasing or decreasing the resource utilizations. The resulting total adjustment cost problem occurs, for example, in the construction industry and can be formulated using mixed-integer linear programming models. Apart from a discrete time-based formulation, two polynomial formulations, namely an event-based model and a start-based model, which exploit structural properties of the problem are presented. In addition, a heuristic solution algorithm is proposed to generate start solutions for the problem. We use CPLEX 12.4 to solve medium-scale instances known from the literature. A computational performance analysis shows that the discrete time-based model and the start-based model are suitable for practical applications.     

Multiple allocation hub-and-spoke network design under hub congestion

The multiple allocation hub-and-spoke network design under hub congestion problem is addressed in this paper. A non-linear mixed integer programming formulation is proposed, modeling the congestion as a convex cost function. A generalized Benders decomposition algorithm has been deployed and has successfully solved standard data set instances up to 81 nodes. The proposed algorithm has also outperformed a commercial leading edge non-linear integer programming package. The main contribution of this work is to establish a compromise between the transportation cost savings induced by the economies of scale exploitation and the costs associated with the congestion effects.