首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 46 毫秒
1.
针对含有参数和时延不确定性线性离散时间系统的鲁棒控制问题,构造改进的Lyapunov函数,并采用LMI与H∞鲁棒控制相结合的方法,使得系统在不含外界未知扰动时,只得满足一个矩阵不等式,便可通过状态的静态反馈控制使闭环系统达到二次稳定;而在系统含有外界未知扰动时,结合基于离散时间系统的无源性控制方法,同样只得满足一个矩阵不等式,便可通过状态的静态反馈控制使得闭环系统达到理想的干扰抑制作用。  相似文献   

2.
基于NCS时延模型的鲁棒容错控制器   总被引:2,自引:0,他引:2  
研究了一类具有未知扰动和参数不确定性的网络化控制系统的鲁棒容错控制问题.针对NCS的时延和不同步对系统产生的影响,基于将时延的不确定性转换为系统状态方程系数矩阵不确定性的NCS模型,同时考虑系统参数不确定性和未知扰动对系统的影响,应用Lyapunov稳定性理论和LMI方法,采用状态反馈控制策略,推证出了保证闭环网络化控制系统在执行器或传感器发生失效故障时仍渐近稳定的充分条件,并通过求解线性矩阵不等式组方便地得到了容错控制器的设计方法,最后用仿真算例验证了此方法的可行性和有效性.  相似文献   

3.
针对具有未知外界扰动和系统不确定性集总未知非线性的四旋翼飞行器,提出了一种采用自适应不确定性补偿器的自适应动态面轨迹跟踪方法.通过将四旋翼飞行器系统分解为位置、欧拉角和角速率3个动态子系统,使各子系统虚拟控制器设计能充分考虑欠驱动约束;结合动态面控制技术,通过采用一阶低通滤波器,避免对虚拟控制信号求导;进而设计自适应不确定性补偿器,处理未知外界扰动和系统不确定性,最终确保闭环控制系统的稳定性、跟踪误差一致最终有界和系统所有状态信号有界.仿真研究和实验结果验证了本文提出控制方法的有效性和优越性.  相似文献   

4.
机械臂的动力学模型通常包含一定的结构不确定性,并受到外界未知干扰的影响。针对现有模型的不确定性特点,提出了一种基于非线性扰动观测器的自适应反演滑模控制方法,解决机械臂的轨迹跟踪控制问题。对于外界干扰,利用非线性扰动观测器进行观测补偿,无需上界先验知识;对于结构不确定性,引入反演滑模控制,同时设计自适应律,保证闭环系统的稳定性并增强系统的动态适应性。仿真结果证明,所提出的方法可以有效克服系统不确定性,降低控制输入信号的抖振,最终实现期望轨迹的快速精确跟踪。  相似文献   

5.
王宁  王永 《自动化学报》2018,44(4):685-695
针对具有未知外界扰动和系统不确定性的四旋翼飞行器,提出了一种基于模糊不确定观测器(Fuzzy uncertainty observer,FUO)的自适应动态面轨迹跟踪控制方法.通过将四旋翼飞行器系统分解为位置、姿态角和角速率三个动态子系统,使得各子系统虚拟控制器能够充分考虑欠驱动约束;采用一阶低通滤波器重构虚拟控制信号及其一阶导数,实现四旋翼跟踪控制设计的迭代解耦;设计了一种模糊不确定观测器,用以估计和补偿未知外界扰动与系统不确定性,从而确保闭环系统的稳定性和跟踪误差与其他系统信号的一致有界性.仿真研究验证了所提出的控制方法的有效性和优越性.  相似文献   

6.
马书根  赵珈靓  任超 《控制与决策》2018,33(6):1081-1086
针对全方位移动机器人轨迹跟踪控制中存在的外界干扰和系统参数不确定性问题,提出基于无源性的自抗扰控制方法.该方法通过扩张状态观测器对系统扰动进行估计,并在基于无源性的控制器中加入扰动补偿项以减小外界干扰和参数不确定性对系统的影响;进而,利用系统的无源特性和Lyapunov 理论证明在该控制器作用下闭环系统有界输入有界输出稳定.仿真结果表明,所提出的控制方法响应速度较快,控制精度较高,对系统外扰和模型参数不确定性具有较强的鲁棒性  相似文献   

7.
李炜  曹慧超  刘微容 《控制工程》2011,18(5):751-757
针对存在时延和丢包的网络化控制系统,同时考虑参数不确定性和有限能量外部扰动的影响,研究了执行器或传感器失效时系统的H∞鲁棒容错控制问题.将丢包当作一种特殊时延,考虑综合时延的区间快变特性,采用状态反馈控制策略,通过构造适当的Lyapunov-Krasovskii泛函,推证出了闭环系统对执行器或传感器失效故障具有H∞鲁棒...  相似文献   

8.
针对具有网络时延和执行器部分故障的网络化控制系统,考虑系统模型可能具有的参数不确定性以及未知扰动,研究执行器饱和时的稳定性问题。对网络时延提出离散事件触发机制,执行器部分故障采用故障矩阵方式,饱和项采取线性凸包法,由此推证出了闭环系统模型。构造Lyapunov 泛函,得出闭环系统在吸引域内达到稳定的充分必要条件,由此得到相应控制器的设计方法。利用仿真证明上述对系统的处理确实可以使系统达到渐近稳定,而事件触发机制也确实可以减少数据量的传输。  相似文献   

9.
本文考虑一类受扰旋转单摆系统的建模与跟踪控制问题. 首先, 利用动静法和相对运动原理建立受扰情形下空间旋转摆系统的动力学模型. 然后, 分别以实际跟踪和渐近跟踪为控制目标, 给出相应的控制设计方法. 具体地,利用向量式的反推控制设计方法与不确定性动态补偿机制, 给出自适应实际跟踪控制器, 保证闭环系统所有状态都有界且在有限时间内系统输出到达并保持在参考信号给定的邻域内. 利用反推设计方法, 并结合扰动的学习、切换补偿机制设计自适应切换渐近跟踪控制器, 通过在线调节控制器参数, 保证闭环系统所有状态都有界且系统输出渐近跟踪到给定的参考信号. 最后, 仿真实验验证所提理论结果的有效性. 值得指出的是, 与相关文献相比, 本文所给出的控制设计方法允许系统同时含有未知参数和扰动, 并且扰动不必有已知上界, 因而具有更强的抑制不确定性的能力.  相似文献   

10.
针对网络闭环控制系统中时延和不同步等不确定因素,将时延的不确定性转换为系统状态方程系数矩阵的不确定性,提出了一种新的网络闭环控制系统建模方法———具有时滞的不确定离散模糊T-S模型;并在此模型的基础上,利用并行分布补偿原理和Lyapunov理论及LMI方法,证明了通过状态的静态反馈模糊控制,使闭环系统稳定的充分条件等价于求解一组LMI。仿真示例验证了该控制方法的有效性.  相似文献   

11.
20世纪60年代,学习控制开启了人类探究复杂系统控制的新途径,基于人工智能技术的智能控制随之兴起.本文以智能控制为主线,阐述其由学习控制向平行控制发展的历程.本文首先介绍学习控制的基本思想,描述了智能机器的架构设计与运行机理.随着信息科技的进步,基于数据的计算智能方法随之出现.对此,本文进一步简述了基于计算智能的学习控制方法,并以自适应动态规划方法为切入点分析非线性动态系统自学习优化问题的求解过程.最后,针对工程复杂性与社会复杂性互相耦合的复杂系统控制问题,阐述了基于平行控制的学习与优化方法求解思路,分析其在求解复杂系统优化控制问题方面的优势.智能控制思想经历了学习控制、计算智能控制到平行控制的演化过程,可以看出平行控制是实现复杂系统知识自动化的有效方法.  相似文献   

12.
This paper considers the stochastic optimal control problem for networked control systems(NCSs)with control packet dropouts.The proportional plus up to the third-order derivative(PD3)compensation strategy is adopted to compensate for control packet dropouts at the actuator by using the past control packets stored in the buffer.Based on the strategy,a new NCS structure model with packet dropouts is provided,where the packet dropout is assumed to obey the Bernoulli random binary distribution.In terms of the given model,the stochastic optimal control law is proposed. Numerical examples illustrate the effectiveness of the results.  相似文献   

13.
In this paper, the problem of designing a switching policy for an adaptive switching control system is formulated as a problem of supervisory control of a discrete-event system (DES). Two important problems in switching control are then addressed using the DES formulation and the theory of supervisory control under partial observation. First, it is verified whether for a given set of controllers, a switching policy satisfying a given set of constraints on the transitions among controllers exists. If so, then a minimally restrictive switching policy is designed. Next, an iterative algorithm is introduced for finding a minimal set of controllers for which a switching policy satisfying the switching constraints exists. It is shown that in the supervisory control problem considered in this paper, limitations on event observation are the factors that essentially restrict supervisory control. In other words, once observation limitations are respected, limitations on control will be automatically satisfied. This result is used to simplify the proposed iterative algorithm for finding minimal controller sets.  相似文献   

14.
15.
In this paper, we consider a new approach to fuzzy control which entails the formulation of a novel state-space representation and a new form of optimal control problem. Basically, in this new formulation, linear functions in the conventional state-space representation and cost functional are replaced by hyperbolic functions. We give a solution for this new, infinite-time, optimal control problem, which we call hyperbolic optimal control. Furthermore, we show that the resulting optimal controller is in fact a Mamdani-type fuzzy controller with Gaussian membership functions and center of gravity defuzzification. These results enable us to investigate analytically important issues, such as stability and robustness, pertaining to fuzzy controllers as well as add a powerful theoretical framework to the field of fuzzy control  相似文献   

16.
17.
In this paper, three control methods—iterative learning control (ILC), repetitive control (RC), and run-to-run control (R2R)—are studied and compared. Some mathematical transformations allow ILC, RC, and R2R to be described in a uniform framework that highlights their similarities. These methods, which play an important role in controlling repetitive processes and run-based processes, are collectively referred to as learning-type control in this paper. According to the classification adopted in this paper, learning-type control has two classes—direct form and indirect form. The main ideas and designing procedures for these two patterns are introduced, separately. Approximately 400 papers related to learning-type control are categorized. Statistical analysis of the resulting data reveals some promising fields for learning-type control. Finally, a flowchart based on the unique features of the different methods is presented as a guideline for choosing an appropriate learning-type control for different problems.  相似文献   

18.
We investigate the relationships between the three classes of systems mentioned in the title: we show that systems with delays in control are a special instance of boundary control systems, and a boundary control system produces a generalized control system when projected onto its (unstable) eigenspaces. We use this observation to investigate the action of feedback on the dynamical behavior of systems with boundary controls. In particular, the well-known fact that spectral controllability is necessary and sufficient for a system with delays in control to be stabilizable is derived from a general rather than from anad hoc method. This paper was written according to the programs of the GNAFA-CNR group, with the financial support of the Italian “Ministero della Pubblica Istruzione.”  相似文献   

19.
The paper addresses the problem of reconciling the modern control paradigm developed by R. Kalman in the sixties of the past century, and the centenary error based design of the proportional, integrative and derivative (PID) controllers. This is done with the help of the error loop whose stability is proved to be necessary and sufficient for the close loop plant stability. The error loop is built by cascading the uncertain plant to model discrepancies (causal, parametric, initial state, neglected dynamics), which are driven by the design model output and by arbitrary bounded signals, with the control unit transfer functions. The embedded model control takes advantage of the error loop and its equations to design appropriate algorithms of the modern control theory (state predictor, control law, reference generator), which guarantee the error loop stability and performance. A simulated multivariate case study shows modeling and control design steps and the coherence of the predicted and simulated performance.  相似文献   

20.
祝超群  郭戈 《控制与决策》2014,29(5):802-808

针对随机事件驱动的网络化控制系统, 研究其中的有限时域和无限时域内最优控制器的设计问题. 首先, 根据执行器介质访问机制将网络化控制系统建模为具有多个状态的马尔科夫跳变系统; 然后, 基于动态规划和马尔科夫跳变线性系统理论设计满足二次型性能指标的最优控制序列, 通过求解耦合黎卡提方程的镇定解, 给出最优控制律的计算方法, 使得网络化控制系统均方指数稳定; 最后, 通过仿真实验表明了所提出方法的有效性.

  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号