共查询到20条相似文献,搜索用时 62 毫秒
1.
2.
研究了存在不确定时延的网络控制系统的鲁棒H∞控制器设计方法.首先讨论了系统的建模问题,针对传感器采用时间驱动,控制器和执行器采用事件驱动,考虑不确定时延小于一个采样周期的情况,网络控制系统可建模为一类具有不确定性的线性离散时延系统,利用Lyapunov方法和线性矩阵不等式方法,推导出闭环控制系统渐近稳定且H∞范数小于性能指标γ的充分条件,并给出动态输出反馈H∞控制律设计方法.通过Matlab数值仿真,证明了该设计方法的有效性. 相似文献
3.
研究一类带有网络传输时滞和丢包的双率采样系统的网络化H∞控制问题. 假设对象状态变量被分成两个分向量, 同一分向量的状态变量由同一类传感器以相同周期采样, 且两类传感器的采样频率不同. 采样后的分向量分别通过非理想网络传输到控制器端. 考虑到双率采样、网络传输时滞和丢包现象, 引入同步观测器来估计对象状态并设计基于估计状态的控制器来镇定双率采样系统. 基于这个思路, 将双率采样的网络化控制系统建模为带有两个时变时滞的连续系统. 利用Lyapunov-Krasovskii泛函方法, 以矩阵不等式形式给出该系统的稳定性判据和控制器设计方法. 最后, 通过数值例子验证所提方法的有效性. 相似文献
4.
5.
6.
针对状态具有多个时滞的线性连续系统,基于Lyapunov稳定性理论和线性矩阵不等式方法(LMI),采用无时滞记忆的状态反馈控制律,研究了在执行器发生故障的情况下,连续多时滞系统的最优H∞容错控制问题.首先,给出了系统没有干扰输入时存在无记忆状态反馈容错控制器的一个充分条件;进一步,给出了在H∞扰动衰减指标约束下,系统存在无记忆状态反馈H∞容错控制器的一个充分条件;最后,给出了最优无时滞记忆状态反馈H∞容错控制器的设计方法.仿真实例证明了所得最优H∞容错控制嚣设计方法的正确性和有效性. 相似文献
7.
研究一类具有测量数据丢失的大系统分散H∞控制器设计问题.针对由个子系统构成的线性离散大系统,假设测量数据丢失满足已知概率的Bernoulli分布,采用线性矩阵不等式方法给出了分散H∞控制器存在的充分条件,所设计的控制器使得闭环系统均方指数稳定,且满足指定的H∞性能指标.通过仿真例子验证了该方法的有效性. 相似文献
8.
9.
二级倒立摆的鲁棒建模及其鲁棒H∞最优控制 总被引:1,自引:0,他引:1
针对倒立摆系统本身存在的大量不确定性因素,建立其不确定数学模型。苦于最优控制的思想,针对二级倒立摆的参数摄动及干扰,设计了鲁棒H∞最优控制器,并在二级倒立摆实验装置上进行控制。实验结果表明;用鲁棒H∞最优控制器的二级倒立摆系统,具有很强的鲁棒稳定性和抗干扰性。 相似文献
10.
11.
智能厂房温湿度控制系统 总被引:4,自引:0,他引:4
首先分析了厂房温湿度控制与一般建筑物空调系统的区别,指出现在流行的空调控制方法不适合厂房温湿度控制;接着提出一种智能温度控制方法,它不需要确定系统的数学模型,用专控制的方法,在不同控制阶段分别采用开关控制,模糊控制和智能PID控制;最后介绍了实行结果。 相似文献
12.
This article presents a novel three-loop control system, which supplements control structures known from the literature as model following control (MFC). The major advantage of the proposed system is its high robustness to process parameter variations; it is much higher than that offered by single-loop or two-loop control systems. Features of the new structure are revealed by a theoretical analysis that has been carried out from the viewpoint of requirements for a force/pose controller of a Stäubli RX60 manipulator. This article shows how the proposed control structure responds to such strong process parameter variations and makes a comparison to results yielded by single-loop control structures. 相似文献
13.
模型跟踪广义预测鲁棒自适应控制器 总被引:5,自引:1,他引:4
本文采用滤波CARMA模型,基于内模原理,提出了一种新的广义预测鲁棒自适应控制器,并分析了闭环系统性能,在新的控制器中,引入适当的前馈作用,使得跟踪和调节问题解耦,利用部分状态跟踪、模型参考以及极点配置方法解决跟踪问题,利用多步预测滚动优化方法解决调节问题;适当选择滤波器可以保证对平稳随机扰动有满意的响应,减少可调参数对闭环系统响应的影响,增强系统对未建模动态的鲁棒性,仿真结果表明:该控制器对确定性和非平稳随机扰动具有不变性,对系统时延和阶次变化具有鲁棒性,适用于非最小相位和开环不稳定系统。 相似文献
14.
15.
Robust containment control in a leader–follower network of uncertain Euler–Lagrange systems 下载免费PDF全文
A distributed controller is developed that yields cooperative containment control of a network of autonomous dynamical systems. The networked agents are modeled with uncertain nonlinear Euler–Lagrange dynamics affected by an unknown time‐varying exogenous disturbance. The developed continuous controller is robust to input disturbances and uncertain dynamics such that asymptotic convergence of the follower agents' states to the dynamic convex hull formed by the leaders' time‐varying states is achieved. Simulation results are provided to demonstrate the effectiveness of the developed controller. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
16.
17.
An approach to the synthesis of control laws stabilizing motion and force in contact tasks, based on the exponential stability of the closed-loop control system, is described. When using the synthesized control laws, simultaneous stabilization of both motion and force is achieved with a preset quality of the transient responses. The task is solved in a most general form, taking into account the constraints on robot control, its position and the force of interaction of the robot and the environment, and the external perturbations and inaccuracies of the measuring sensors, when the environment dynamics is being described by nonlinear second-order differential equation, and the robot dynamics includes the third-order equations of the robot actuators dynamics. 相似文献
18.
对于具有较大时滞,非线性和时变性特点的打样机对象(它是印染行业中的一种小型设备),常规PID控制方法往往难以达到良好的控制效果.本文将专家控制器与常规PID控制器相结合,提出了一种智能控制器结构.试验表明,与常规PID控制器相比,该控制器的控制精度有了明显的提高. 相似文献
19.
一种专家智能控制器的仿真研究 总被引:1,自引:0,他引:1
该文提出一种专家智能控制器(简称为EI控制器).该控制器的参数可基于专家知识和过程参数的变化实时进行调整。仿真结果表明对于工业过程中的大纯滞后、非线性、变参数特性能获得较为满意的调节效果。 相似文献
20.
Juan Garrido Francisco Vázquez Fernando Morilla 《International journal of systems science》2016,47(5):1054-1072
This paper presents a new methodology to design multivariable proportional-integral-derivative (PID) controllers based on decoupling control. The method is presented for general n × n processes. In the design procedure, an ideal decoupling control with integral action is designed to minimise interactions. It depends on the desired open-loop processes that are specified according to realisability conditions and desired closed-loop performance specifications. These realisability conditions are stated and three common cases to define the open-loop processes are studied and proposed. Then, controller elements are approximated to PID structure. From a practical point of view, the wind-up problem is also considered and a new anti-wind-up scheme for multivariable PID controller is proposed. Comparisons with other works demonstrate the effectiveness of the methodology through the use of several simulation examples and an experimental lab process. 相似文献