参数为k的几乎树中的染色多路割

染色多路割问题源于对等网络中的数据分片,是传统多路割问题的推广。给定颜色相关边赋权图G和G上若干特异顶点的局部染色,将该局部染色扩展到所有顶点上,使得两端点染不同颜色的边的权和最小。对于参数为k的几乎树,给出了多项式时间精确算法。也就是说,染色多路割问题是固定参数可解的,其中的参数k是使得G中任意双连通分支C成为树所要拿掉的最大边数。     

随机图的均匀边染色算法

图的均匀边染色是指图中任意两条相邻的边都分配到不同的颜色,且任意两个色类的颜色个数最大相差1。对图 进行均匀边染色所需的最少颜色数叫做 的均匀边色数。本文提出了一种启发式算法,能够求解图的最小均匀边色数。该算法根据均匀边染色条件,设计了两个子目标函数和一个总目标函数,借助染色矩阵的色补矩阵迭代交换,逐步寻优,直到找到最优解时结束。本文给出了详细的算法设计流程,并且进行了大量的测试和分析,实验结果表明,该算法可以高效地求出给定点数的图的最小均匀边色数,算法时间复杂度不超过 。     

随机图的点可区别全染色算法

点可区别全染色(VDTC)是指在满足正常全染色的基础上,还要使得图中由顶点颜色和其关联边颜色构成的顶点色集合也不同,所使用的最少颜色数称为点可区别全色数.提出了一种针对随机图的点可区别全染色算法,算法的基本思想是对图G中的边随机地进行预染色,查找存在边染色不正常的冲突集,然后根据规则逐步迭代,直至使目标函数的值满足要求,此时说明染色成功.实验结果表明,算法能够有效地求得给定点数随机图的点可区别全色数,算法时间复杂度不超过O(n3).     

随机图的点可区别V-全染色算法

图G的点可区别V-全染色就是相邻的边、顶点与其关联边必须染不同的颜色,同时要求所有顶点的色集合也不相同,所用的最少颜色数称为图G的点可区别V-全色数。根据点可区别V-全染色的约束规则,设计了一种启发式的点可区别V-全染色算法,该算法借助染色矩阵及色补集合逐步迭代交换,每次迭代交换后判断目标函数值,当目标函数值满足要求时染色成功。给出了算法的详细描述、算法分析和算法测试结果,对给定点数的图进行了点可区别V-全染色猜想的验证。实验结果表明,该算法有很好的执行效率并可以得到给定图的点可区别V-全色数,并且算法的时间复杂度不超过O(n3)。     

随机图的邻点可区别VI-均匀全染色算法

邻点可区别VI-均匀全染色是指图中任意两条相邻边分配不同的颜色,且任意两个色类(点或边)的颜色个数最大相差为1,同时确保相邻顶点的色集合不同,其所用的最少颜色数称为图的邻点可区别VI-均匀全色数。提出了一种针对随机图的邻点可区别VI-均匀全染色算法,该算法依据染色条件设计了三个子目标函数和一个总目标函数,并依据交换规则逐步迭代寻优,直至染色结果满足总目标函数的要求。同时给出了详细的算法执行步骤,并进行了大量的测试和分析,实验结果表明,该算法可以高效地求出给定顶点数的图的最小邻点可区别VI-均匀全色数。     

图的Smarandachely邻点可区别边染色算法

为解决图的Smarandachely邻点可区别边染色问题,提出一种基于多目标优化的染色算法。针对每个子问题分别设置子目标函数向量和决策空间,在颜色迭代、顺序交换和强制交换中,子目标逐渐得到最优解,最终使总目标函数符合图的Smarandachely邻点可区别边染色要求。实验结果表明,在1 000个顶点内该算法能够正确地得到随机图的Smarandachely邻点可区别边色数。     

几类特殊图中的最小最大多路割

给定边具有正权的无向图,并指定若干个称为终端的顶点,最小最大多路割问题是要得到所有顶点的一个聚类,要求每个子类恰好包含一个终端,并使得所有子类的最大费用最小。子类的费用定义为该子类边界上所有边的权之和。最小最大多路割问题源于对等网络中的数据放置,是传统多路割问题的一个变形。当给定无向图是树图时,这一问题已经是强NP难解的。对于链图和环图,给出了线性时间的精确算法,该算法同时也使得所有子类的总费用最小。对于树图和限制树宽图,给出了(2-1/2k2)-近似算法,k表示终端的数目。     

一种判定图中Hamilton圈的邻接边增长算法

一个图是否为Hamilton图在于图中是否有Hamilton圈.文中提出了变换的方法来寻找图中的Hamilton圈,即在图的顶点集中寻找满足包含给定图中所有顶点的自归邻接边增长变换的方法来寻找给定图中的Hamilton圈.由此,设计了一个在Edmonds意义下的有效算法--自归邻接边增长算法(AEG)来寻找给定图中的自归邻接边增长变换,证明了该算法能正确判断给定简单无向图中有无Hamilton圈且时间复杂度为O(n2).最后通过应用实例说明该算法的有效性和实用性.     

基于局部有限搜索的无向图近似最大团快速求解算法

无向图最大团求解是一个著名的NP-完全问题,解决该问题的经典算法基本上都采用完全精确搜索策略。鉴于NP-完全问题本身所固有的复杂性,这些算法或许仅适用于某些特殊的小规模图,对于具有大规模顶点和边的复杂图还是显得无力,难以适用。针对完全精确搜索策略下的无向图最大团求解算法的大部分时间都用于对图进行额外而无效的查找的问题,采用分划递归技术将图划分为邻接子图和悬挂子图,然后对邻接子图进行递归求解,而对悬挂子图则通过设置搜索范围控制函数进行局部有限搜索。在DIMACS数据集上将所提算法与当前主要的最大团求解算法进行对比实验,结果表明,文中提出的局部有限搜索求解策略能在75%的基准数据上获得最大团,剩下不能得到最大团的数据实际上也可以获得接近于最大团的近似最大团,但算法的平均求解时间仅为目前最大团精确求解算法的20%左右。因此,在很多最大团非精确要求的场景中,所提算法具有极高的应用价值。     

异质信息网络中最大路径连通Steiner分量查询算法

异质信息网络(HINs)是包含多种类型对象(顶点)和链接(边)的有向图,能够表达丰富复杂的语义和结构信息.HINs中的稠密子图查询问题,即给定一个查询点q,在HINs中查询包含q的稠密子图,已成为该领域的热点和重点研究问题,并在活动策划、生物分析和商品推荐等领域具有广泛应用.但现有方法主要存在以下两个问题:(1)基于模体团和关系约束查询的稠密子图具有多种类型顶点,导致其不能解决仅关注某种特定类型顶点的场景;(2)基于元路径的方法虽然可查询到某种特定类型顶点的稠密子图,但其忽略了子图中顶点之间基于元路径的连通度.为此,首先在HINs中提出了基于元路径的边不相交路径的连通度,即路径连通度;然后,基于路径连通度提出了k-路径连通分量(k-PCC)模型,该模型要求子图的路径连通度至少为k;其次,基于k-PCC模型提出了最大路径连通Steiner分量(SMPCC)概念,其为包含q的具有最大路径连通度的k-PCC;最后,提出一种高效的基于图分解的k-PCC发现算法,并在此基础上提出了优化查询SMPCC算法.大量基于真实和合成HINs数据的实验结果验证了所提出模型和算法的有效性和高效性.     

煤矿井下安全监控分站的设计及其仿真实现

为了设计一种具有低成本、低功耗、易操作、功能强且可靠性高的煤矿井下安全分站,针对煤矿安全生产实际,文章提出了采用MCS-51系列单片机为核心、具有CAN总线通信接口的煤矿井下安全监控分站的设计方案;首先给出煤矿井下安全监控分站的整体构架设计,然后着重阐述模拟量输入信号处理系统的设计过程,最后说明单片机最小系统及其键盘、显示、报警、通信等各个组成部分的设计;为验证设计方案的可行性与有效性,使用Proteus软件对设计内容进行仿真验证,设计的煤矿井下安全监控分站具有瓦斯、温度等模拟量参数超标报警功能和电机开停、风门开闭等开关量指示功能;仿真结果表明:设计的煤矿井下安全监控分站具有一定的实际应用价值.     

View-based model-driven architecture for enhancing maintainability of data access services

In modern service-oriented architectures, database access is done by a special type of services, the so-called data access services (DAS). Though, particularly in data-intensive applications, using and developing DAS are very common today, the link between the DAS and their implementation, e.g. a layer of data access objects (DAOs) encapsulating the database queries, still is not sufficiently elaborated, yet. As a result, as the number of DAS grows, finding the desired DAS for reuse and/or associated documentation can become an impossible task. In this paper we focus on bridging this gap between the DAS and their implementation by presenting a view-based, model-driven data access architecture (VMDA) managing models of the DAS, DAOs and database queries in a queryable manner. Our models support tailored views of different stakeholders and are scalable with all types of DAS implementations. In this paper we show that our view-based and model driven architecture approach can enhance software development productivity and maintainability by improving DAS documentation. Moreover, our VMDA opens a wide range of applications such as evaluating DAS usage for DAS performance optimization. Furthermore, we provide tool support and illustrate the applicability of our VMDA in a large-scale case study. Finally, we quantitatively prove that our approach performs with acceptable response times.     

A pragmatic multi-method investigation of discrepant technological events: Coping,attributions, and ‘accidental’ learning

Discrepant technological events or situations that entail a problem, a misunderstanding or a difficulty with the Information Technology (IT) being employed, are common in the workplace, and can lead to frustration and avoidance behaviors. Little is known, however, about how individuals cope with these events. This paper examines these events by using a multi-method pragmatic approach informed by coping theory. The results of two studies – a critical incident study and an experiment – serve to build and test, respectively, a theoretical model that posits that individuals use a variety of strategies when dealing with these events: they experience negative emotions, make external attributions, and adopt engagement coping strategies directed at solving the event, eventually switching to a disengagement coping strategy when they feel they have no control over the situation. Furthermore, users’ efforts may result in ‘accidental’ learning as they try to overcome the discrepant IT events through engagement coping. The paper ends with a discussion of the results in light of existing literature, future opportunities for research, and implications for practice.     

The Distributed Time-Triggered Simulation Scheme: Core Principles and Supporting Execution Engine

Distributed real-time simulation is a young technology field but its practice is under increasing demands. In recent years the author and his collaborators have been establishing a new approach called the distributed time-triggered simulation (DTS) scheme which is conceptually simple and easy to use but widely applicable. The concept was initiated in the course of developing a new-generation object-oriented real-time programming scheme called the time-triggered message-triggered object (TMO) programming scheme. Some fundamental issues inherent in distributed real-time simulation that were learned during recent experimental studies are discussed along with some approaches for resolving the issues. An execution engine developed to support both the TMOs engaged in control computation and the TMOs engaged in DTS is also discussed along with its possible extensions that will enable significantly larger-scale DTSs.     

Software-Konfigurationsmanagement in großen Softwareprojekten

Zusammenfassung Mit zunehmender Größe der Softwaresysteme verschärfen sich die für die Software-Herstellung typischen Probleme: Beherrschen großer Objektmengen, Erhalten der Systemkonsistenz, Kontrolle der ständigen Änderungseinflüsse und Gewährleisten einer langen Lebensdauer. Die Disziplin Konfigurationsmanagement bildet den methodischen Ansatz, diese Probleme besser zu beherrschen. Software-Konfigurationsmanagement faßt die Herstellung von Softwaresystemen als eine Abfolge von kontrollierten Änderungen an gesicherten Zwischen- und Endergebnissen auf. Dargestellt werden die Objekte und Funktionen des Software-Konfigurationsmanagements sowie die hierfür in großen Software-Projekten benötigten Methoden, Instanzen und Hilfsmittel.     

Information for Authors

正http://www.zju.edu.cn/jzus http://www.springerlink.com Aim The Journals of Zhejiang University-SCIENCE(A/B/C)are edited by the international board of distinguished Chinese and foreign scientists,and are aimed to present the latest developments and achievements in scientific research in China and     

Editorial:Brain-machine interface(BMI) and cyborg intelligence

正Brain-machine interfaces(BMIs)aim at building a direct communication pathway between the brain and an external device,and represent an area of research where significant progress has been made during the past decade.Based on BMIs,mind information can be read out by neural signals to control     

Information for Authors

正http://www.zju.edu.cn/jzus http://www.springerlink.com Aim The Journals of Zhejiang University-SCIENCE(A/B/C)are edited by the international board of distinguished Chinese and foreign scientists,and are aimed to present the latest developments and achievements in scientific research in China and overseas to the world’s scientific circles,especially to stimulate     

SCIENCE CHINA Information Sciences SUBJECT INDEX TO VOLUME 57(2014)

正~~     

Information for Authors

正http://www.zju.edu.cn/jzus http://www.springerlink.com Aim The Journals of Zhejiang University-SCIENCE(A/B/C)are edited by the international board of distinguished Chinese and foreign scientists,and are aimed to present the latest developments and achievements in scientific research in China and overseas to the world’s scientific circles,especially to stimulate