模糊CMAC的柔性空间机器人轨迹跟踪自学习控制

针对不确定自由漂浮柔性空间机器人系统,采用模糊CMAC神经网络自学习控制策略来解决轨迹跟踪控制问题.首先建立漂浮基空间机器人的动力学方程,然后利用具有快速学习能力的模糊CMAC神经网络来逼近非线性柔性臂的逆动力学模型.网络参数采用改进的有监督的Hebb学习规则进行自适应在线调整,并通过关联搜索进行自学习和自组织,其误差代价函数由PID控制器提供.仿真结果表明,这种模糊CMAC逆模PID控制器能够达到较高的控制精度,具有一定的工程应用价值.     

漂浮基空间机器人自适应RBF 网络终端滑模控制

主要研究漂浮基空间机器人对工作空间连续轨迹跟踪控制问题．针对系统动力学模型中非线性项未知，以及参数不确定性和外界扰动无法估计的情况，提出了基于自适应RBF网络终端滑模控制方法．该方法结合了非线性滑动流形与径向基函数特性，利用自适应RBF网络在线学习系统中的不确定性，使得无需精确的动力学模型亦能保证系统在有限时间内快速稳定．根据Lyapunov方法设计的自适应增益保证闭环控制系统具有全局稳定性，并且有效抑制抖振现象．针对6关节空间机器人的轨迹跟踪控制仿真表明，提出的自适应RBF网络终端滑模控制方法能够基于不完整动力学模型实现高精度轨迹跟踪，且误差在有限时间内快速收敛，系统抖振也得到了有效抑制．     

空间机器人柔性臂的动力学轨迹跟踪控制

机器人柔性擘控制问题是目前机器人研究中的一个重点和难点，本文动用基于关节的求逆技术，得到了有关大质量负载的空间机器人柔性臂动力学轨迹跟踪非线性控制问题的有效方法，并以一平面二杆空间机器人柔性臂为例进行了控制的仿真研究，仿真研究的结果表明，该方法具有较高的可靠性和良好的控制效果。     

自由漂浮空间机器人轨迹跟踪的模型预测控制

针对传统控制方法难以解决自由漂浮空间机器人(free-floating space robot, FFSR)轨迹跟踪过程中的各类约束的问题,采用模型预测控制对自由漂浮空间机器人的轨迹跟踪问题进行了研究.在自由漂浮空间机器人拉格朗日动力学模型的基础上,建立了系统伪线性化的扩展状态空间模型;在给定系统的性能指标和各类约束的情况下,基于拉盖尔模型设计相应的离散模型预测控制器,并证明控制器的稳定性,控制器中引入任务空间滑模变量实现了对末端期望位置和期望速度的同时跟踪;以平面二杆自由漂浮空间机器人为例,对无约束末端轨迹跟踪和有约束末端轨迹跟踪两种情况进行对比仿真验证.仿真结果表明,该模型预测控制器不仅可以实现对末端期望轨迹的有效跟踪,还能满足各类约束.     

漂浮基柔性空间机械臂姿态与关节协调运动的Terminal滑模控制

讨论了载体位置无控、姿态受控情况下,具有外部扰动的漂浮基柔性空间机械臂载体姿态与各关节协调运动的控制问题．基于假想模态法、系统动量守恒关系及拉格朗日方法,建立了漂浮基柔性空间机械臂系统的动力学方程,并将其转化为系统控制状态方程．以此为基础,根据Terminal滑模控制技术,给出了系统相关Terminal滑模面的数学表达式,在此基础上提出了具有外部扰动情况下漂浮基柔性空间机械臂载体姿态与各关节协调运动的Terminal滑模控制方案．提出的控制方案不但确保了闭环系统滑模阶段的存在性,同时通过Terminal滑模函数的适当选取,还保证了输出误差在有限时间内的收敛性．此外,由于确保了无论何种情况下系统初始状态均在Terminal滑模面上,从而消除了其它滑模控制方法常有的到达阶段,使得闭环系统具有全局鲁棒和稳定性．一个平面两杆漂浮基柔性空间机械臂的系统数值仿真,证实了方法的有效性．     

基于PMSM驱动的柔性关节空间机械臂轨迹跟踪控制方法

针对目前柔性关节空间机械臂轨迹跟踪控制方法忽略了不同重力影响下的机械臂驱动力变化,导致柔性关节空间机械臂轨迹跟踪控制效果较差的问题,提出了基于PMSM驱动的柔性关节空间机械臂轨迹跟踪控制方法。基于构建PMSM驱动数学模型,采用PMSM的矢量控制方法,分析驱动力矩矢量。根据驱动力矩矢量分析结果,分析不同重力环境下有、无摩擦时的驱动力矩。构建柔性关节模型,分析其在不同重力环境下遇到的重力释放问题,使用自适应反演滑膜控制方法,设计控制率,保证机械臂能够按照既定的方向运动,使机械臂具有鲁棒性。根据柔性关节空间机械臂动力学特性,分析不同重力环境下基于PMSM驱动力矩,确定重力项是随之发生改变的。设计控制器,构建动力学模型,确保空间阶段能够最大限度跟踪运动轨迹。实验结果表明,所提方法X轴、Y轴的末端跟踪结果均与实际运动轨迹一致,误差为0。关节控制力矩在时间为3s时,出现了最大为0.5N.m的误差,说明所提方法的跟踪控制效果较好。     

柔性关节机器人非线性解耦控制

本文提出了一种柔性关节机器人模型的非线性解耦控制规律，并给出了全局线性化系统的变换方程。     

自由漂浮空间机器人末端轨迹优化自适应控制

惯性参数不确定情况下的自由漂浮空间机器人(FFSR)轨迹跟踪控制是当前FFSR自主控制研究的重点与难点之一.针对该问题,提出一种FFSR末端轨迹优化自适应跟踪控制方法.该方法首先基于离散状态依赖黎卡提方程(DSDRE),设计两级DSDRE优化跟踪控制器,然后在控制器输出基础上,通过求解有约束条件下的非线性优化问题实现FFSR惯性参数的辨识,进而根据辨识结果调整控制器相关参数,实现FFSR末端轨迹的优化自适应跟踪控制.最后,采用平面两连杆FFSR模型进行仿真,验证了所提出方法的有效性.     

空间柔性双臂机器人的神经网络协调控制

基于对机器人闭链系统运动特性的分析,采用假设模态法及拉格朗日方程建立了自由浮动空间柔性双臂机器人协调操作刚性负载闭链系统的动力学模型,然后采用基于小脑模型的模糊神经网络与非线性PD并行控制的方法对该动力学模型进行轨迹跟踪,并对内力采用积分控制;通过仿真实验比较,该方法比一般的非线性PD控制,在跟踪误差、抗干扰性、鲁棒性方面,都有很大的改善.     

漂浮基空间机械臂分解运动控制的增广自适应算法

本文讨论了载体位置与姿态均不受控制的漂浮基两杆空间机械臂系统的逆运动学问题 ,推导了系统的运动学、动力学方程．分析表明,结合系统动量守恒及动量矩守恒关系得到 的系统广义Jacobi关系为系统惯性参数的非线性函数．本文证明了,借助于增广变量法可以 将增广广义Jacobi矩阵表示为一组适当选择的惯性参数的线性函数．并在此基础上,给出了 系统参数未知时由空间机械臂末端惯性空间期望轨迹产生机械臂关节铰期望角速度、角加速 度的增广自适应控制算法．仿真运算,证实了方法的有效性．     

Dynamics and Noncollocated Model‐Free Position Control for a Space Robot with Multi‐Link Flexible Manipulators

In this paper, both the dynamics and noncollocated model‐free position control (NMPC) for a space robot with multi‐link flexible manipulators are developed. Using assumed modes approach to describe the flexible deformation, the dynamic model of the flexible space robotic system is derived with Lagrangian method to represent the system dynamic behaviors. Based on Lyapunov's direct method, the robust model‐free position control with noncollocated feedback is designed for position regulation of the space robot and vibration suppression of the flexible manipulators. The closed‐loop stability of the space robotic system can be guaranteed and the guideline of choosing noncollocated feedback is analyzed. The proposed control is easily implementable for flexible space robot with both uncertain complicated dynamic model and unknown system parameters, and all the control signals can be measured by sensors directly or obtained by a backward difference algorithm. Numerical simulations on a two‐link flexible space robot are provided to demonstrate the effectiveness of the proposed control.     

Dynamic modelling and adaptive robust tracking control of a space robot with two-link flexible manipulators under unknown disturbances

In this paper, both the closed-form dynamics and adaptive robust tracking control of a space robot with two-link flexible manipulators under unknown disturbances are developed. The dynamic model of the system is described with assumed modes approach and Lagrangian method. The flexible manipulators are represented as Euler–Bernoulli beams. Based on singular perturbation technique, the displacements/joint angles and flexible modes are modelled as slow and fast variables, respectively. A sliding mode control is designed for trajectories tracking of the slow subsystem under unknown but bounded disturbances, and an adaptive sliding mode control is derived for slow subsystem under unknown slowly time-varying disturbances. An optimal linear quadratic regulator method is proposed for the fast subsystem to damp out the vibrations of the flexible manipulators. Theoretical analysis validates the stability of the proposed composite controller. Numerical simulation results demonstrate the performance of the closed-loop flexible space robot system.     

柔性机械臂运动轨迹的鲁棒自适应控制

本文针对多连杆柔性机械臂的运动轨迹问题，讨论了动力学建模，控制系统结构设计以及鲁棒自适应控制法，运用假设模记方法得到了柔性机械臂动力学所似方程，通过对柔性机械臂动力学特性分析，建立了等价动力学模型，依此提出了一种鲁棒自适应控制算法，并给出仿真研究结果。     

Dynamic state feedback control of two cooperative manipulators

Dynamic coordinated control of two robot manipulators that rigidly grasp a common object is studied. A dynamic coordinated control model for the two manipulators is derived that is suitable for system analysis and design in state space. The model takes into account kinematic and dynamic constraints between the two manipulators, and is explicitly described by non-linear state equtions and non-linear output equations in the state space. Since coordinated control requires the control of forces applied to the object by manipulators, the output equations include both position components and force components. While robotic systems with position outputs can be linearized using a static state feedback, systems with force outputs, such as the present two robot system, require a dynamic non-linear state feedback for exact linearization. By using dynamic non-linear feedback, coordinated control of two robotic manipulators is converted into a control problem of linear systems.     

performance control of robot manipulators with kinematics,dynamics and actuator uncertainties

This paper deals with the task‐space trajectory tracking control problem of robot manipulators. An improved adaptive backstepping controller is proposed to deal with the uncertainties in kinematics, dynamics, and actuator modeling. To avoid the explosion of computation in conventional backstepping techniques, a modified dynamic surface control algorithm is proposed, which guarantees the asymptotic convergence rather than the uniformly ultimately boundedness of tracking errors in conventional dynamic surface control methods. Furthermore, the expression of the norm of tracking errors is explicitly derived in relation to the controller parameters, which provides instructions on tuning controller parameters to adjust the system performance. Moreover, the passivity structure of the designed adaptation law is thoroughly analyzed. Simulation of a free‐floating space robot is used to verify the effectiveness of the proposed control strategy in comparison with the conventional tracking control schemes. Copyright © 2016 John Wiley & Sons, Ltd.     

考虑柔性关节的机械臂自适应运动控制策略研究

具有柔性关节的轻型机械臂因其自重轻、响应迅速、操作灵活等优点,取得了广泛应用;针对具有柔性关节的机械臂系统的关节空间轨迹跟踪控制系统动力学参数不精确的问题,提出一种结合滑模变结构设计的自适应控制器算法;通过自适应控制的思想对系统动力学参数进行在线辨识,并采用Lyapunov方法证明了闭环系统的稳定性;仿真结果表明,该控制策略保证了机械臂系统对期望轨迹的快速跟踪,具有良好的跟踪精度,系统具有稳定性。     

A systematic formulation of dynamic equations for robot manipulators with elastic links

Although a variety of formulation schemes for the dynamic equations of robot manipulators with rigid links can be found in the literature, an efficient method of the formulation for robot manipulators with elastic links is not well known. Accordingly, this work presents the derivation of the equations of motion for application to mechanical manipulators with elastic links. The formulation is conducted analytically using Hamilton's principle. The resultant equations consist of the terms of inertial, Coriolis, centrifugal, gravitational, and exerted forces. They are expressed in terms of a set of independent generalized coordinates. In contrast to conventional variational approaches, the present method provides an efficient and systematic way for obtaining the compact symbolic equations of flexible manipulator systems. Two examples are presented to illustrate the proposed methodology. Firstly, a three-link flexible manipulator with three revolute joints is studied. A flexible manipulator consisting of a prismatic joint and a discrete mass is the second model.     

A systematic method of dynamics for flexible robot manipulators

In this article, a systematic method to derive dynamic equations of motion for flexible robot manipulators is developed by using the Lagrangian assumed modes method. The proposed method can be applied to dynamic simulation and control system design for flexible robot manipulators. In the proposed method, the link deflection is described by a truncated modal expansion. The operations of only 3x3 matrices and/or 3 × 1 vectors exist in the method. All the dynamics computations are performed in the link coordinate systems, where the kinematics informations are computed with the forward recursion from the base to the hand tip and the dynamics informations are computed with the return recursion. As generally compared with other existing methods, the method proposed in this article is, computationally, more simple, systematic, and efficient. A computational simulation for a single-link flexible robot manipulator is presented to verify the proposed method. © 1992 John Wiley & Sons, Inc.     

Experimental Control of a Two-Dof Flexible Robot Manipulator by Optimal and Sliding Methods

This paper presents an experimental study of a robust control scheme for flexible-link robotic manipulators. The design is based on a simple strategy for trajectory tracking which exploits the two-time scale nature of the flexible part and the rigid part of the dynamic equations of this kind of robotic arms: A slow subsystem associated with the rigid motion dynamics and a fast subsystem associated with the flexible link dynamics. Two experimental approaches are considered. In a first test an LQR optimal design strategy is used, while a second design is based on a sliding-mode scheme. Experimental results on a laboratory two-dof flexible manipulator show that this composite approach achieves good closed-loop tracking properties for both design philosophies, which compare favorably with conventional rigid robot control schemes.     

State Space Constrained Iterative Learning Control for Robotic Manipulators

Real‐life work operations of industrial robotic manipulators are performed within a constrained state space. Such operations most often require accurate planning and tracking a desired trajectory, where all the characteristics of the dynamic model are taken into consideration. This paper presents a general method and an efficient computational procedure for path planning with respect to state space constraints. Given a dynamic model of a robotic manipulator, the proposed solution takes into consideration the influence of all imprecisely measured model parameters, making use of iterative learning control (ILC). A major advantage of this solution is that it resolves the well‐known problem of interrupting the learning procedure due to a high transient tracking error or when the desired trajectory is planned closely to the state space boundaries. The numerical procedure elaborated here computes the robot arm motion to accurately track a desired trajectory in a constrained state space taking into consideration all the dynamic characteristics that influence the motion. Simulation results with a typical industrial robot arm demonstrate the robustness of the numerical procedure. In particular, the results extend the applicability of ILC in robot motion control and provide a means for improving the overall trajectory tracking performance of most robotic systems.