Single‐substrate encapsulated cholesteric LCDs: Coatable,drapable, and foldable

Abstract— The first ever, reflective cholesteric liquid‐crystal displays (ChLCDs) on single textile substrates made with simple coating processes have been developed. A novel approach for fabrication of ultra‐thin encapsulated ChLCDs with transparent conducting polymers as bottom and top electrodes will be reported. These displays are fabricated from the bottom‐up by sequential coating of various functional layers on fabric materials. Encapsulation of the cholesteric liquid‐crystal droplets in a polymer matrix and the mechanical flexibility of the conducting polymers allow for the creation of durable and highly conformable textile displays. The development and status of this next‐generation display technology for both monochrome and multicolor cholesteric displays will be discussed.     

Flexible area‐color reflective displays based on electric‐field‐induced blueshift in a cholesteric liquid‐crystal film

Abstract— An electrically controllable blueshift of the reflection band is observed in a cholesteric liquid crystal with either positive or negative dielectric anisotropy. The change in optical properties is a result of a two‐dimensional periodic undulation of the cholesteric texture, known as Helfrich deformation. This blueshift mechanism was used to demonstrate area‐color reflective displays in a cholesteric cell and a rollable polymeric film.     

A single‐cell‐gap transflective liquid‐crystal display using different pretilt angles in transmissive and reflective regions

Abstract— A single‐cel l‐gap transflective liquid‐crystal display with two types of liquid‐crystal alignment based on an in‐plane‐switching structure is proposed. The transmissive region is almost homeotropically aligned with the rubbed surfaces at parallel directions while the reflective region has a homeotropic liquid‐crystal alignment. For every driving voltage for a positive‐dielectric‐anisotropy nematic liquid crystal, the effective cell‐retardation value in the transmissive region becomes larger than that in the reflective region because of optical compensation film which is generated by low‐pretilt‐angle liquid crystal in the transmissive region. Under the optimization of the liquid‐crystal cell and alignment used in the transmissive and reflective areas, the transmissive and reflective parts have similar gamma curves. An identical response time in both the transmissive and reflective regions and a desirable viewing angle for personal portable displays can also be obtained.     

Application of re‐crystallized metal‐induced unilaterally crystallized polycrystalline‐silicon thin‐film‐transistor technology to reflective liquid‐crystaldisplay

Single‐polarizer reflective twisted‐nematic (RTN) liquid‐crystal modes offer larger viewing angles, higher contrast ratios and lower power dissipation compared to regular double‐polarizer transmissive‐ reflective liquid‐crystal implementations. The application of re‐crystallized metal‐induced unilaterally crystallized polycrystalline‐silicon thin‐film‐transistor (TFT) technology to realize active matrices and peripheral circuit components for hand‐held direct‐view RTN‐mode video displays is reported.     

Photostable liquid‐crystal guest‐host nano‐materials for display applications

Abstract— We theoretically modeled the optical plasmon absorption of anisotropic metallic nanoparticles in a liquid‐crystal host medium. Metallic nanorods and spheroids act as pleochroic dopants with virtually unlimited photostability. Calculations predict that full‐color displays based on nanorod orientation driven by the transition from homogeneous to homeotropic LC alignment are feasible. These displays are expected to have large viewing angles without the need for polarizers or LC anchoring surfaces.     

Energy‐efficient liquid‐crystal displays (e2‐LCDs) using a photonic‐crystal backlight system

Abstract— Cholesteric liquid crystals automatically form one‐dimensional photonic crystals. For a photonic crystal in which light‐emitting moieties are embedded, unique properties such as microcavity effects and simultaneous light emission and light reflection can be expected. Three primary‐color photonic‐crystal films were prepared based on cholesteric liquid crystal in which fluorescent dye is incorporated. Microcavity effects, i.e., emission enhancement and spectrum narrowing, were observed. Two types of demonstration liquid‐crystal displays (LCDs) were fabricated using the prepared photonic‐crystal films in a backlight system. One is an area‐color LCD in which a single photonic‐crystal layer is used for each color pixel and the other is a full‐color TFT‐LCD in which three stacked photonic‐crystal layers are used as light‐conversion layers. The area‐color LCD was excited by using 365‐nm UV light, and the full‐color TFT‐LCD was excited by using 470‐nm blue LED light. Because of the photonic crystal's unique features that allow it to work as light‐emitting and light‐reflecting layers simultaneously, both LCDs demonstrate clear readable images even under strong ambient light, such as direct‐sunlight conditions, under which conventional displays including LCDs and OLED displays cannot demonstrate clear images. In particular, an area‐color LCD, which eliminated color filters, gives clear images under bright ambient light conditions even without backlight illumination. This fact suggests that a backlight system using novel photonic‐crystal layers will be suitable for energy‐efficient LCDs (e²‐LCDs), especially for displays designed for outdoor usage.     

Development of a 42‐in. 2‐D/3‐D switchable display using multi‐view technology for public‐information‐display applications

Abstract— A 42‐in. 2‐D/3‐D switchable display operating in a parallax‐barrier‐type system consisting of liquid‐crystal displays (LCDs) has been developed. The system displays 2‐D images in full resolution, without any degradation to the original 2‐D images, and 3‐D autostereoscopic images with resolutions higher than SVGA with wide viewing zones electrically controlled by the parallax‐barrier system. The system is intended for use in public‐information displays (PIDs), a booming field, and as displays for gaming, medical, and simulation applications.     

MUTED: Multi‐user 3‐D display

Abstract— Research described in this paper encompasses the design and building of glasses‐free (autostereoscopic) displays that utilize a direct‐view liquid‐crystal display whose backlight is provided by a projector and novel steering optics. This is controlled by the output of a multi‐user head‐position tracker. As the displays employ spatial multiplexing on a liquid‐crystal‐display screen, they are inherently 2‐D/3‐D switchable with 2‐D being achieved by simply displaying the same image in the left and right channels. Two prototypes are described in this paper; one incorporating a holographic projector and the other a conventional LCOS projector. The LCOS projector version addresses the limitations of brightness, cross‐talk, banding in the images, and laser stability that occur in the holographic projector version. The future development is considered and a comparison between the prototypes and with other 3‐D displays is given.     

Liquid‐crystal displays using printed plastic TFT backplanes

Abstract— In this paper, we present results from a new liquid crystal over plastic printed thin‐film‐transistor (TFT) display. The display demonstrator shows that the processing incompatibilities between the plastic TFT backplane and the liquid‐crystal materials can be addressed to make a stable twisted‐nematic structure. New fabrication processes such as the photo‐alignment of liquid crystals have made it possible to create a new generation of displays, which pave the way towards fully integrated plastic liquid‐crystal‐display technologies.     

Advanced monochrome gray‐scale TFT‐LCD using diamond‐like‐carbon/ion‐beam alignment technology

Abstract— A novel liquid‐crystal alignment method, diamond‐like carbon and ion beam alignment (DLC/IB) technology, was announced at the 2001 SID Symposium. And since December 2001, a new‐generation ion‐beam machine has been placed into the manufacturing line of IDTech. DLC/IB technology is mainly used for medical displays, which require a monochrome high‐density and super‐uniform display. We report on the latest developments of these advanced monochrome displays.     

Projection‐based head‐tracking 3‐D displays

Abstract— This paper describes the construction and operation of four 3‐D displays in which each display produces two images for each eye and thus fits into the category of projection‐based binocular stereoscopic displays. The four 3‐D displays described are pico‐projector‐based, liquid‐ crystal—on—silicon (LCOS) conventional projector‐based, 120‐Hz digital‐light‐processor (DLP) projector‐ based, and the HELIUM3D system. In the first three displays, images are produced on a direct‐view LCD whose conventional backlight is replaced with a projection illumination source that is controlled by a multi‐user head tracker; novel steering optics direct the projector output to regions referred to as exit pupils located at the viewers' eyes. In the HELIUM3D display, the image information is supplied by a horizontally scanned, fast, light valve whose output is controlled by a spatial light modulator (SLM) to direct images to the appropriate viewers' eyes. The current statu s and the multimodal potential of the HELIUM3D display are described.     

A multistable smectic‐A liquid‐crystal device with low threshold field

Abstract— A multistable liquid‐crystal device has been realized in this study; its smectic‐A LC is oriented by in‐plane and out‐of‐plane electric fields with various amplitudes. This paper introduces improvements made to electrode structure and hybrid surface treatments that have enhanced SmA LC device performance. The driving voltage of the hybrid‐aligned cell has been reduced to 20% of the vertical‐aligned one, and light leakage has been suppressed by out‐of‐plane electric‐field‐strength modulation. The many advantages of this multi‐stabilized LC device could be applied to memory devices and to flexible displays.     

Ultra‐fast‐switching flexoelectric liquid‐crystal display with high contrast

Abstract— The flexoelectro‐optic effect provides a fast‐switching mechanism (0.01–0.1 msec), suitable for use in field‐sequential‐color full‐motion‐video displays. An in‐plane electric field is applied to a short‐pitch chiral nematic liquid crystal aligned in the uniform standing helix (or Grandjean) texture. The switching mechanism is experimentally demonstrated in a single‐pixel test cell, and the display performance is investigated as a function of device parameters. A contrast ratio of 2000:1 is predicted.     

2‐D/3‐D displays based on switchable lenticulars

Abstract— An attractive concept for 3‐D displays is the one based on LCDs equipped with lenticular lenses. This enables autostereoscopic multiview 3‐D displays without a loss in brightness. A general issue in multiview 3‐D displays is their relatively low spatial resolution because the pixels are divided among the different views. To overcome this problem, we have developed switchable displays, using liquid‐crystal (LC) filled switchable lenticulars. In this way, it is possible to have a high‐brightness 3‐D display capable of fully exploiting the native 2‐D resolution of the underlying LCD. The feasibility of LC‐filled switchable lenticulars was shown in several applications. For applications in which it is advantageous to be able to display 3‐D and 2‐D content simultaneously, a 42‐in. locally switchable prototype having a matrix electrode structure was developed. These displays were realized using cylindrically shaped lenticular lenses in contact with LC. An alternative for these are lenticulars based on gradient‐index (GRIN) LC lenses. Preliminary results for such switchable GRIN lenses are presented as well.     

A polarizer‐free flexible display using dye‐doped liquid‐crystal gels

Abstract— A reflective‐type polarizer‐free flexible display using a dye‐doped liquid‐crystal (LC) gels is demonstrated. Compared to the conventional guest‐host LC mode, it has high contrast ratio and brightness due to the combining of both scattering and absorption. Such a gel‐like flexible display is bendable and trimable. In this paper, a three‐step switch using distinct dye‐doped LC gels is also demonstrated. The potential applications are e‐paper and decorative displays.     

3‐D mobile display based on dual‐directional light guides with a fast‐switching liquid‐crystal panel

Abstract— An autostereoscopic display based on dual‐directional light guides with a fast‐switching liquid‐crystal panel was designed and fabricated to provide better 3‐D perception with image qualities comparable to that of 2‐D displays. With two identical micro‐grooved light guides, each with a light‐controlled ability in one direction, two restricted viewing cones are formed to project pairs of parallax images to the viewer's respective eyes sequentially. Crosstalk of less than 10% located within ±8°–±30° and an LC response time of 7.1 msec for a 1.8‐in. LCD panel can yield acceptable 3‐D perceptions at viewing distance of 5.6–23 cm. Moreover, 2‐D/3‐D compatibility is provided in this module.     

Processes,characterizations, and system applications of color‐filter liquid‐crystal‐on‐silicon microdisplays

Abstract— A color‐filter liquid‐crystal‐on‐silicon (CF‐LCOS) microdisplay that integrates color filters on silicon for color will be presented. The color‐filter process on silicon was optimized to achieve fine resolution and precise alignment of the color filters on the pixel array, good adhesion to the silicon suface, and a flat surface for the liquid‐crystal cell assembly. Important optical and electrical parameters of the color filters were extracted to establish an electro‐optical model of the CF‐LCOS microdisplays for device simulation. Thermal, chemical, and light‐stability characterizations were performed to ensure the stabilty of the color filters and CF‐LCOS microdisplays. With color CF‐LCOS microdisplays already available, the projection or viewing optics is greatly simplified. This CF‐LCOS microdisplay is ideal for near‐to‐eye displays because of its low‐power consumption and compactness. The CF‐LCOS microdisplay could also withstand medium light illumination for medium‐sized projectors. A single‐panel projector based on one CF‐LCOS microdisplay of 1280 × 768 × RGB resolution was demonstrated.     

Flexible ferroelectric liquid‐crystal devices containing fine polymer fibers

A new flexible ferroelectric liquid‐crystal‐display device with gray‐scale capability has been created by using submicrometer‐diameter polymer fibers. The polymer fibers, which are formed by photopolymerization of aligned monomer molecules in liquid crystal, align the ferroelectric liquid crystal and mechanically support two flexible thin plastic substrates. The composite film made of liquid crystal and polymer with a thickness of 2 μm was formed between the plastic substrates by using a fabrication method consisting of coating, lamination, and ultraviolet irradiation processes without the conventional gap‐forming and injection processes. The fabricated flexible device revealed gray‐scale capability due to the change in spatial distribution of micrometer‐sized binary‐switching liquid‐crystal domains. From the polarizing microscope observation, it was found that the switching domains are generated and expanded from the areas with poor polymer density. The experimental results indicated that the polymer fibers spatially modulate the threshold voltage for molecular switching. Our device exhibits great potential for flexible large‐sized light‐weight motion‐image displays.     

Moiré‐reduction methods for integral videography autostereoscopic display with color‐filter LCD

Abstract— Moiré‐reduction methods for integral videography displays are proposed. Integral videography is based on the principles of integral photography and extended real‐time video processing. There are two moiré‐reduction methods that can be used for integral videography displays that have a lens array and a liquid‐crystal display. The first is color moiré, and the second is intensity moiré. To reduce color moiré, an optimized color‐filter layout in the liquid‐crystal display was used. To reduce intensity moiré, a defocusing method was used. Adesign of a viewing area for the integral videography display is also presented. To control the viewing area, the lens pitch and the shape of the integral videography elemental image was changed. A 5‐in. integral videography display was implemented by using the proposed methods, and an integral videography display was evaluated.     

Two‐parallax‐barriers‐based autostereoscopic liquid‐crystal display without cross‐talk

Abstract— An autostereoscopic liquid‐crystal display (LCD) consists of two parallax barriers and an LCD including a liquid‐crystal panel, and a backlight panel is proposed. Parallax barrier 1 is located between the backlight panel and the liquid‐crystal panel, and Parallax barrier 2 is located between the liquid‐crystal panel and viewers. The operation principle of the autostereoscopic display and the calculation equations for the parallax barriers are described in detail. The autostereoscopic LCD was developed and produces high‐quality stereoscopic images without cross‐talk at the optimal viewing distance and less cross‐talk than a conventional one based on one parallax barrier at other viewing distances.