Circularly polarized D‐shaped slot antenna for wireless applications

A multiband circularly polarized slot antenna for wireless local area networks (WLAN) and worldwide interoperability for microwave access (WiMAX) applications is designed, studied, and fabricated. Using modified ground plane structure, circular polarized characteristics are realized. An open rectangular loop is introduced on the ground plane to generate orthogonal modes at middle resonance frequency. At higher resonance frequency to improve axial ratio bandwidth, a D‐shaped radiator is used. Thus, the cooperation of modified ground plane, open loop resonator, and D‐shaped radiator improves performance of the antenna at all the required bands. The proposed microstrip antenna generates separate impedance bandwidths to cover frequency bands of WLAN and WiMAX applications. The realized antenna is relatively small in size 40 × 54 mm² or 0.26_ × 0.36_ where _ is the free‐space wavelength at the desired first resonant frequency 2.0 GHz and operates over frequency ranges 26% (2.0‐2.6 GHz), 8.9% (3.21‐3.51 GHz), and 50.6% (3.8‐6.38 GHz). In addition, the antenna exhibits 5% (2.32‐2.44 GHz), 5.8% (3.3‐3.5 GHz), and 5.2% (5.61‐5.91 GHz) Circular Polarization bandwidth, making it suitable for WLAN and WiMAX applications.     

Compact triband slotted printed monopole antenna for WLAN and WiMAX applications

This work presents a triband antenna, which is compact, low profile, and covers the bandwidth requirements for WLAN and WiMAX applications. The proposed design is a modified and miniaturized printed monopole antenna. It consists of beveling rectangular patch, a Pi‐shape slot element, and an inverted‐L slot element to achieve resonance in three bands. The physical size of the antenna is 27.5 × 20 mm² while the electrical size is 0.26 λ₀ × 0.23 λ₀ at the lower operating frequency which is very compact as compared to other triband designs. It works in three bands, that is, 2.37 to 2.52 GHz, 3.35 to 3.90 GHz, and 4.97 to 7.85 GHz with |S₁₁| < ? 10 dB within these operating bands. The prototype of the proposed miniaturized antenna has been fabricated and the measured results are provided for validation. Antenna performance is studied in terms of input match, gain, radiation efficiency, surface current distributions, and radiation pattern. The antenna shows a nearly omnidirectional radiation pattern with peak efficiency of 90% and acceptable gain of 4 dBi over the three operating bands of WLAN and WiMAX. The prototype of the antenna is fabricated, and simulated results have been verified through measurements.     

A vertex‐fed hexa‐band frequency reconfigurable antenna for wireless applications

Present article embodies the design and analysis of an octagonal shaped split ring resonator based multiband antenna fed at vertex for wireless applications with frequency‐band reconfigurable characteristics. The proposed antenna is printed on FR4 substrate with electrical dimension of 0.4884 λ × 0.4329 λ × 0.0178 λ (44 × 39 × 1.6 mm³), at lower frequency of 3.33 GHz. The antenna consists of SRR based vertex fed octagonal ring as the radiation element and switchable reclined L‐shaped slotted ground plane. Antenna achieves six bands for wireless standards viz: upper WLAN (5.0/5.8 GHz), lower WiMAX (3.3 GHz), super extended C‐band (6.6 GHz), middle X band (9.9 GHz—for space communication), and lower K_U band (15.9 GHz—for satellite communication systems operating band). Stable radiation patterns are observed for the operating bands with low cross polarization. The proposed design achieves hexa band characteristics during switching ON state of PIN diode located at reclined L‐shaped slot in the ground plane. Experimental characteristic of antenna shows close agreement with those obtained by simulation of the proposed antenna.     

Design and performance investigation of a low profile MIMO/Diversity antenna for WLAN/WiMAX/HIPERLAN applications with high isolation

A low profile triband compact multiple input multiple output (MIMO) antenna operating at WLAN, WiMAX, and HIPERLAN bands is presented. The proposed MIMO antenna consists of two planar inverted‐F antenna elements located at the top two corners of printed circuit board (PCB). Dimensions of each antenna elements are reduced substantially by employing a meandered line and folded patch structure so that it occupies a small volume of 9 × 8.8 × 5.4 mm³. The proposed antenna consists of three arms namely, Main arm, Side arm 1, and Side arm 2. Each individual arm resonates corresponding to the λ/4 electrical length. Characterization of the antenna is carried out in the mobile environment as well as in user proximity. In the presence of mobile environment which includes liquid crystal display (LCD), Battery, RF components, and plastic housing, the isolation as well as reflection coefficient parameters deteriorated. To avoid the aggravation of S‐parameters, two nonradiating folded shorting strips are connected between each antenna element and ground plane of PCB. This folded shorting strip not only improves the isolation between ports but also prevent the deterioration of reflection coefficient parameter. The total efficiency, envelope correlation coefficient, and multiplexing efficiency are studied in the user proximity. The optimized structure is fabricated and measured. The measured S‐parameters cover WLAN (2.46–2.6 GHz), WiMAX (3.37–3.75 GHz), and HIPERLAN (5.2–5.87 GHz) based on ?10 dB reflection coefficient and ?24 dB isolation is achieved between antenna ports. Good agreement is obtained between the simulated and measured results. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:510–521, 2015.     

A modified split ring resonator based printed compact monopole UWB antenna with spiked elliptical radiator having five band rejection features

A coplanar waveguide (CPW) fed printed compact monopole antenna with five band rejection features is presented. Wide bandwidth was achieved by beveling the lower part and adding a modified ellipse on the upper portion of the patch. An inverted circular arc, single circular split ring resonator (SRR) with wide opening and two symmetrical circular single SRRs were embedded for obtaining three stop‐band characteristics. Two symmetrical slits were inculcated in the ground forming defected ground structure (DGS) to get another stop‐band characteristic. Two concentric rectangular modified SRRs were etched to obtain a higher frequency stop‐band feature. The proposed antenna was designed, fabricated, and experimentally tested for the validation of results. The overall dimensions of the proposed antenna were 29 mm × 24 mm × 1.6 mm. The measured impedance bandwidth of the antenna was 2.87 to 13.3 GHz at | S₁₁ |< ? 10 dB. The measured results show that the proposed antenna has five band notches centred at 3.96, 4.35, 5.7, 8.54, and 9.95 GHz to reject WiMAX band (3.65‐4.04 GHz), ARN band (4.29‐5.18 GHz), WLAN band (5.5‐6.9GHz), ITU‐8 band (7.37‐8.87), and amateur radio band (9.2‐10.3 GHz) respectively. The proposed antenna maintains omnidirectional radiation pattern in H‐Plane and dumbbell‐shape radiation pattern in E‐plane. Further, stable gain over the whole UWB except at notched frequency bands was reported.     

Dual‐band reconfigurable circularly polarized monopole antenna

A microstrip antenna with dual‐band reconfigurable circular polarization (CP) characteristics in Wireless Local Area Network (WLAN) and Worldwide Interoperability for Microwave Access (WiMAX) bands is presented in this article. The proposed antenna has a symmetrical U‐shaped slot with PIN diodes on the ground plane. The slotted ground generates a resonant mode for broad impedance‐band width, and excites contrary CP state at 2.45 GHz for WLAN and 3.4 GHz for WiMAX, respectively. Because switching the states of PIN diodes on the slot can redirect the current path, the CP state of the proposed antenna can be simply switched between the right‐handed CP and left‐handed CP. The proposed antenna has a low profile and a simple structure. Measured results of the fabricated antenna prototype are carried out to verify the simulation analysis. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:109–114, 2015.     

A metamaterial hepta‐band antenna for wireless applications with specific absorption rate reduction

Present article embodies the design and analysis of slotted circular shape metamaterial loaded multiband antenna for wireless applications with declination of SAR. The electrical dimension is 0.260 λ × 0.253 λ × 0.0059 λ (35 × 34 × 0.8 mm³) of proposed design, at lower frequency of 2.23 GHz. The antenna consists of circular shape rectangular slot as the radiation element loaded with metamaterial split ring resonator (SRR) and two parallel rectangular stubs, etched rectangular single complementary split‐ring resonator (CSRR) and reclined T‐shaped slot as ground plane. Antenna achieves hepta bands for wireless standards WLAN (2.4/5.0/5.8 GHz), WiMAX (3.5 GHz), radio frequency identification (RFID) services (3.0 GHz), Upper X band (11.8 GHz—for space communication) and Lower K_U band (13.1 GHz—for satellite communication systems operating band). Stable radiation patterns are observed for the operating bands with low cross polarization. The SRR is responsible for creating an additional resonating mode for wireless application as well as provide the declination in SAR about 13.3%. Experimental characteristic of antenna shows close agreement with those obtained by simulation of the proposed antenna.     

Coplanar waveguide‐fed electrically small dual‐polarized short‐ended zeroth‐order resonating antenna using Ω‐shaped capacitor and single‐split ring resonator for GPS/WiMAX/WLAN/C‐band applications

This work explains the design and analysis of a triple‐band electrically small (ka = 0.56 < 1) zeroth‐order resonating (ZOR) antenna with wideband circular polarization (CP) characteristics. The antenna compactness is obtained due to ZOR frequency of composite right/left‐handed (CRLH) transmission line (TL) and wideband CP radiation are achieved due to the introduction of single‐split ring resonator and asymmetric coplanar waveguide fed ground plane. The proposed antenna obtains an overall electrical size including the ground plane of 0.124 λ₀ × 0.131 λ₀ × 0.005 λ₀ at 1.58 GHz and physical dimension of 23.7 × 25 × 1 mm³ are achieved. The antenna provides a size reduction of 44.95% compared to a conventional monopole antenna. The novelty behind the ohm‐shaped capacitor is the generation of extra miniaturization with better antenna compactness. The antenna provides dual‐polarized radiation pattern with linear polarization radiation at 1.58 and 3.54 GHz, wideband CP radiation at 5.8 GHz. The antenna measured results shows good impedance bandwidth of 5%, 6.21%, and 57.5% for the three bands centered at 1.58, 3.54, and 5.8 GHz with a wider axial ratio bandwidth (ARBW) of 25.47% is obtained in the third band. The antenna provides a higher level of compactness, wider ARBW, good radiation efficiency, and wider S₁₁ bandwidth. Hence, the proposed antenna is suitable for use in GPS L1 band (1.565‐1.585 GHz), WiMAX 3.5 GHz (3.4‐3.8 GHz) GHz, WLAN 5.2/5.8 GHz (5.15‐5.825 GHz), and C‐band (4‐8 GHz) wireless application systems.     

A wideband compact antenna with quad‐circular polarized bands in its operating regions

This article presents the design of an offset CPW‐fed slot antenna which exhibits a narrow impedance bandwidth (IBW; |S₁₁| ≤ ?10 dB) extending from 1.20 GHz to 1.45 GHz and another wide impedance bandwidth from 1.86 GHz to 8.4 GHz thus covering almost all the conventional operating frequencies. The antenna is loaded with semicircular and rectangular stubs and meandered microstrip lines to realize circular polarization at 1.35 GHz, 3.3 GHz, 4.9 GHz, and 7.5 GHz with axial ratio bandwidth (axial ratio ≤ 3 dB) of 19.25% (1.2‐1.46 GHz), 4.24% (3.24‐3.38 GHz), 4.1%(4.8‐5 GHz), and 5.2% (7.3‐7.69 GHz) respectively thus covering the GPS, WiMAX, WLAN, and X‐band downlink satellite communication application bands. The mechanism of generation of CP is discussed using vector analysis of surface current density distribution. The gain is fairly constant in the wide IBW region with maximum fluctuation of 1.2 dB. The structure is compact with an overall layout area of 0.27λ × 0.27λ, where λ is the free‐space wavelength corresponding to the lowest circular polarized (CP) frequency. A comparison of the proposed antenna with previously reported structures is performed with respect to impedance bandwidth, compactness, number of CP bands, LHCP to RHCP isolation and gain to comprehend the novelty of the proposed design. A prototype of the proposed antenna is fabricated and the measured results are in accord with the simulated results.     

Uniplanar ACS fed multiband high‐gain antenna with extended rectangular strips for portable system applications

In this article, a compact uniplanar asymmetric coplanar strip (ACS)‐fed multiband antenna with extended rectangular strips is proposed for portable system applications. It is composed of a modified mouse and rectangular‐shaped radiating strip for generating three resonance frequency bands simultaneously. The proposed antenna has a compact size of 16 × 26 × 1.6 mm³. Antenna has |S₁₁| ≤ ?10 dB at three independent controlled bandwidths from 2.2 to 2.4 GHz, 3.5 to 3.7 GHz, and 4.85 to 6.85 GHz. The proposed ACS‐fed antenna is suitable for LTE 2300, WiBro 2300 GHz, 5.2/5.8‐GHz WLAN, 3.5/5.5‐GHz WiMAX, 4.9‐GHz US public safety band, and 5.9‐GHz WAVE applications. The antenna has omnidirectional radiation characteristics in the desired frequency bands in both E‐plane and H‐plane. It has better gain value performance compared with other antenna designs discussed in the literature.