首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到16条相似文献,搜索用时 453 毫秒
1.
张天平  王敏 《控制与决策》2018,33(12):2113-2121
针对一类具有输入、状态未建模动态和非线性输入的耦合系统,提出一种自适应神经网络控制方案.利用径向基函数神经网络逼近未知非线性连续函数;引入动态信号和正则化信号处理状态及输入未建模动态;通过引入非线性映射,将具有时变输出约束的严格反馈系统化为不含约束的严格反馈系统.最后,通过理论分析验证闭环系统中所有信号是半全局一致最终有界的,仿真结果进一步验证了所提出控制方案的有效性.  相似文献   

2.

针对一类具有输入及状态未建模动态的非线性系统, 设计K滤波器来估计系统不可量测状态, 基于动态面控制技术并利用径向基函数神经网络的逼近能力, 提出一种输出反馈自适应跟踪控制方案. 利用Nussbaum 函数性质, 有效地解决了高频增益符号未知问题. 在控制器设计中引入规范化信号来约束输入未建模动态, 从而有效地抑制其产生的扰动. 通过理论分析证明了闭环控制系统是半全局一致终结有界的.

  相似文献   

3.
针对一类具有未建模动态和输出约束的输出反馈非线性系统, 提出一种自适应输出反馈动态面控制方案. 利用神经网络逼近未知连续函数, 分别设计K滤波器和动态信号估计不可测量的状态, 并处理动态不确定性. 引入障碍李雅普诺夫函数并设计自适应控制器以保证BLF有界, 从而实现输出约束. 理论分析表明, 闭环控制系统是半全局一致终结有界的, 且满足输出约束, 仿真结果验证了所提出方案的有效性.  相似文献   

4.
赵光同  曹亮  周琪  李鸿一 《自动化学报》2021,47(8):1932-1942
针对一类具有未建模动态及执行器故障的非严格反馈非线性互联大系统, 提出一种基于事件触发机制的模糊分散自适应输出反馈控制算法. 首先, 通过设计模糊状态观测器估计系统中不可测的状态, 并引入李雅普诺夫函数约束未建模动态. 然后, 提出一种基于事件触发机制的自适应容错控制器补偿多个执行器故障产生的影响. 最后, 利用障碍李雅普诺夫函数实现对系统输出的约束, 并证明闭环系统中所有信号均是半全局一致最终有界的, 且设计的事件触发机制可以避免Zeno行为. 数值仿真结果验证所提出设计方案的可行性及有效性.  相似文献   

5.
对一类具有状态和输入未建模动态且控制增益符号未知的纯反馈非线性系统,利用非线性变换、改进的动态面控制方法以及Nussbaum函数性质,提出两种自适应动态面控制方案.利用正则化信号来约束输入未建模动态,从而有效地抑制其产生的扰动.通过引入动态信号,有效地处理了由状态未建模动态引起的动态不确定性.通过在总的李雅普诺夫函数中引入非负正则化信号,并利用稳定性分析中引入的紧集,证明了闭环控制系统是半全局一致终结有界的.数值仿真验证了所提方案的有效性.  相似文献   

6.
针对一类具有全状态约束、未建模动态和动态扰动的严格反馈非线性系统,通过构造非线性滤波器,并利用Young’s不等式,提出一种新的有限时间自适应动态面控制方法.引入非线性映射处理全状态约束,将有约束系统变成无约束系统,利用径向基函数逼近未知光滑函数,利用辅助系统产生的动态信号处理未建模动态.对于变换后的系统,利用改进的动态面控制和有限时间方法设计的控制器结构简单,移去现有有限时间控制中出现的“奇异性”问题,可加快系统的收敛速度.理论分析表明,闭环系统中的所有信号在有限时间内有界,全状态不违背约束条件.数值算例的仿真结果表明,所提出的自适应动态面控制方案是有效的.  相似文献   

7.
对一类具有未建模动态的严格反馈非线性系统,提出一种自适应神经网络动态面控制方案.该方案将动态面控制方法扩展到具有未建模动态的严格反馈非线性系统的控制器设计中,拓展了动态面控制方法的应用范围.利用动态面控制方法引入的紧集来处理未建模动态对于系统的影响.利用Young's不等式,提出两种自适应参数调节方案.与现有研究结果相比,有效地减少了可调参数的数目,放宽了动态不确定性的假设,无需虚拟控制增益系数导数的信息.通过理论分析,证明了闭环控制系统是半全局一致终结有界的,且跟踪误差收敛到原点的一个小邻域内.  相似文献   

8.
本文研究了一类具有输入量化、未建模动态和执行器故障的非线性多智能体系统的一致跟踪问题.引入一个可量测的动态信号消除未建模动态对系统的影响.利用Young’s不等式和高斯函数的性质,有效地处理了多智能体邻居节点在设计的第一步中对子系统的耦合作用.通过将滞回量化器表示为具有有界系数和有界扰动的输入线性函数,并利用动态面控制方法,提出一种自适应神经网络动态面控制方案,简化了控制器的设计,保证了闭环系统的所有信号都是半全局一致终结有界的,所有跟随者都能实现期望的一致性.最后,仿真结果验证了所提出的自适应控制策略的有效性.  相似文献   

9.
本文考虑具有量化输入和输出约束的一类非线性互联系统的自适应分散跟踪控制设计. 分别针对量化参数已知和未知两种情况, 基于反推(Backstepping)设计法, 利用神经网络逼近特性, 设计自适应分散跟踪控制策略. 通过定义新的未知常量和非线性光滑函数, 设计自适应参数估计项来消除未知互联项对系统的影响. 进一步考虑量化参数未知的情形, 引入一个新的不等式来转化输入信号, 并构建新的自适应补偿项来处理量化影响. 同时, 障碍李雅普诺夫函数的引入, 确保了系统输出不违反约束条件. 与现有量化输入设计相比, 本文所提方法不要求未知非线性项满足李普希兹条件, 并且允许量化参数未知. 该设计方法保证了闭环系统所有信号最终一致有界, 而且跟踪误差能够收敛到原点的小邻域内, 同时保证输出不违反约束条件. 最后, 仿真算例验证了所提方法具备良好的跟踪控制性能.  相似文献   

10.
针对一类具有死区非线性输入的非线性系统,同时考虑系统中存在未建模不确定项,设计了自适应控制器及未知参数的自适应估计率.该控制器使得闭环系统全局稳定且实现了输出信号对参考信号的精确跟踪.仿真结果进一步证实了该控制器能对未知死区及未建模动态进行有效的补偿。  相似文献   

11.
In this paper, the problem of neural adaptive dynamic surface quantized control is studied the first time for a class of pure‐feedback nonlinear systems in the presence of state and output constraint and unmodeled dynamics. The considered system is under the control of a hysteretic quantized input signal. Two types of one‐to‐one nonlinear mapping are adopted to transform the pure‐feedback system with different output and state constraints into an equivalent unconstrained pure‐feedback system. By designing a novel control law based on modified dynamic surface control technique, many assumptions of the quantized system in early literary works are removed. The unmodeled dynamics is estimated by a dynamic signal and approximated based on neural networks. The stability analysis indicates that all the signals in the closed‐loop system are semiglobally uniformly ultimately bounded, and the output and all the states remain in the prescribed time‐varying or constant constraints. Two numerical examples with a coarse quantizer show that the proposed approach is effective for the considered system.  相似文献   

12.
The finite-time command filter tracking control for a class of nonstrictly feedback nonlinear systems with unmodeled dynamics and full-state constraints is investigated in this paper. The hyperbolic tangent function is used as a nonlinear mapping technique to solve the obstacle of the full-state constraints. A new adaptive finite time control method is proposed through command filtering reverse engineering, and the shortcomings of the dynamic surface control (DSC) method are overcome by the error compensation mechanism. Dynamic signal is designed to handle dynamical uncertain terms. Normalization signal is designed to handle input unmodeled dynamics. Unknown nonlinear functions are approximated by radial basis function neural networks. Based on the Lyapunov stability theory, it is proved that all signals in the closed-loop system are semi-globally consistent and finally bounded and the output tracking error converges in finite time. Two numerical examples are utilized to verify the effectiveness of the proposed control approach.  相似文献   

13.
In this paper, an adaptive robust dynamic surface control is proposed for a class of uncertain nonlinear interconnected systems with time‐varying output constraints and dynamic input and output coupling. The directly coupled inputs and control inputs are both of nonlinear input unmodeled dynamics. To counteract the instable impact of the nonlinear input unmodeled dynamics, normalization signals are designed on the basis of the convergence rates of their Lyapunov functions. With new state variables and control variables being defined, the real control inputs are obtained through solving the equations of intermediate control laws. The time‐varying constraints on output signals are implemented by introducing asymmetric barrier Lyapunov functions. In addition, dynamic signals and decentralized K‐filters are used to deal with the state unmodeled dynamics and to estimate the unmeasurable states, respectively. By the theoretical analysis, the signals in the closed‐loop system are proved to be semi‐globally uniformly ultimately bounded, and the output constraints are guaranteed simultaneously. A numerical example is provided to show the effectiveness of the proposed approach. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

14.
This paper studies the output feedback tracking control problem for a class of strict‐feedback uncertain nonlinear systems with full state constraints and unmodeled dynamics using a prescribed performance adaptive neural dynamic surface control design approach. A nonlinear mapping technique is employed to address the state constraints. Radial basis function neural networks are utilized to approximate the unknown nonlinear functions. The unmodeled dynamics is addressed by introducing an available dynamic signal. Subsequently, we construct the controller and parameter adaptive laws using a backstepping technique. Based on Lyapunov stability theory, it is shown that all signals in the closed‐loop system are semiglobally uniformly ultimately bounded and that the tracking error always remains within the prescribed performance bound. Simulation results are presented to demonstrate the effectiveness of the proposed control scheme.  相似文献   

15.
This paper presents an up-to-date study on the observer-based control problem for nonlinear systems in the presence of unmodeled dynamics and actuator dead-zone. By introducing a dynamic signal to dominate the unmodeled dynamics and using an adaptive nonlinear damping to counter the effects of the nonlinearities and dead-zone input, the proposed observer and controller can ensure that the closed-loop system is asymptotically stable in the sense of uniform ultimate boundedness. Only one adaptive parameter is needed no matter how many unknown parameters there are. The system investigated is more general and there is no need to solve Linear matrix inequality (LMI). Moreover, with our method, some assumptions imposed on nonlinear terms and dead-zone input are relaxed. Finally, simulations illustrate the effectiveness of the proposed adaptive control scheme.  相似文献   

16.
A robust version of the adaptive control algorithm established by G. Kreisselmeier (1989) is presented. If the conventional dead-zone adaptive law is used in the adaptive system, it is troublesome that the size of the unmodeled dynamics, denoted by ∈, must be within the chosen dead-zone size for robustness. In this robust version, by introducing a positive design parameter, the robust stability can be achieved without this constraint. It is also shown that the plant output and control input will converge asymptotically within a certain bound. Moreover, in the ideal case, the plant output and control input will converge to zero under some condition  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号